summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_pf.c')
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pf.c105
1 files changed, 58 insertions, 47 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index 3ca0233b3ea2..8c0bdc4e4edd 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -59,6 +59,11 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
return FM10K_ERR_DMA_PENDING;
+ /* verify the switch is ready for reset */
+ reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2);
+ if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY))
+ goto out;
+
/* Inititate data path reset */
reg |= FM10K_DMA_CTRL_DATAPATH_RESET;
fm10k_write_reg(hw, FM10K_DMA_CTRL, reg);
@@ -72,6 +77,7 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
if (!(reg & FM10K_IP_NOTINRESET))
err = FM10K_ERR_RESET_FAILED;
+out:
return err;
}
@@ -185,19 +191,6 @@ static s32 fm10k_init_hw_pf(struct fm10k_hw *hw)
}
/**
- * fm10k_is_slot_appropriate_pf - Indicate appropriate slot for this SKU
- * @hw: pointer to hardware structure
- *
- * Looks at the PCIe bus info to confirm whether or not this slot can support
- * the necessary bandwidth for this device.
- **/
-static bool fm10k_is_slot_appropriate_pf(struct fm10k_hw *hw)
-{
- return (hw->bus.speed == hw->bus_caps.speed) &&
- (hw->bus.width == hw->bus_caps.width);
-}
-
-/**
* fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table
* @hw: pointer to hardware structure
* @vid: VLAN ID to add to table
@@ -1162,6 +1155,24 @@ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results,
}
/**
+ * fm10k_iov_select_vid - Select correct default VID
+ * @hw: Pointer to hardware structure
+ * @vid: VID to correct
+ *
+ * Will report an error if VID is out of range. For VID = 0, it will return
+ * either the pf_vid or sw_vid depending on which one is set.
+ */
+static inline s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
+{
+ if (!vid)
+ return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid;
+ else if (vf_info->pf_vid && vid != vf_info->pf_vid)
+ return FM10K_ERR_PARAM;
+ else
+ return vid;
+}
+
+/**
* fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF
* @hw: Pointer to hardware structure
* @results: Pointer array to message, results[0] is pointer to message
@@ -1175,9 +1186,10 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
struct fm10k_mbx_info *mbx)
{
struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
- int err = 0;
u8 mac[ETH_ALEN];
u32 *result;
+ int err = 0;
+ bool set;
u16 vlan;
u32 vid;
@@ -1193,19 +1205,21 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (err)
return err;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vid || (vid == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vid |= vf_info->pf_vid;
- else
- vid |= vf_info->sw_vid;
- } else if (vid != vf_info->pf_vid) {
+ /* verify upper 16 bits are zero */
+ if (vid >> 16)
return FM10K_ERR_PARAM;
- }
+
+ set = !(vid & FM10K_VLAN_CLEAR);
+ vid &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vid);
+ if (err < 0)
+ return err;
+ else
+ vid = err;
/* update VSI info for VF in regards to VLAN table */
- err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi,
- !(vid & FM10K_VLAN_CLEAR));
+ err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
@@ -1221,19 +1235,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
memcmp(mac, vf_info->mac, ETH_ALEN))
return FM10K_ERR_PARAM;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vlan |= vf_info->pf_vid;
- else
- vlan |= vf_info->sw_vid;
- } else if (vf_info->pf_vid) {
- return FM10K_ERR_PARAM;
- }
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+ else
+ vlan = err;
/* notify switch of request for new unicast address */
- err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, mac, vlan,
- !(vlan & FM10K_VLAN_CLEAR), 0);
+ err = hw->mac.ops.update_uc_addr(hw, vf_info->glort,
+ mac, vlan, set, 0);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
@@ -1248,19 +1261,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
return FM10K_ERR_PARAM;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vlan |= vf_info->pf_vid;
- else
- vlan |= vf_info->sw_vid;
- } else if (vf_info->pf_vid) {
- return FM10K_ERR_PARAM;
- }
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+ else
+ vlan = err;
/* notify switch of request for new multicast address */
- err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, mac, vlan,
- !(vlan & FM10K_VLAN_CLEAR));
+ err = hw->mac.ops.update_mc_addr(hw, vf_info->glort,
+ mac, vlan, set);
}
return err;
@@ -1849,7 +1861,6 @@ static struct fm10k_mac_ops mac_ops_pf = {
.init_hw = &fm10k_init_hw_pf,
.start_hw = &fm10k_start_hw_generic,
.stop_hw = &fm10k_stop_hw_generic,
- .is_slot_appropriate = &fm10k_is_slot_appropriate_pf,
.update_vlan = &fm10k_update_vlan_pf,
.read_mac_addr = &fm10k_read_mac_addr_pf,
.update_uc_addr = &fm10k_update_uc_addr_pf,
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 18:34:43 +0300