summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c14
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h1
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c5
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c45
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c43
5 files changed, 74 insertions, 34 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 1f063dcd8f85..0b3bade957fd 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1680,16 +1680,18 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
e_dbg("ANYSTATE -> DOWN\n");
} else {
/*
- * Check several times, if Sync and Config
- * both are consistently 1 then simply ignore
- * the Invalid bit and restart Autoneg
+ * Check several times, if SYNCH bit and CONFIG
+ * bit both are consistently 1 then simply ignore
+ * the IV bit and restart Autoneg
*/
for (i = 0; i < AN_RETRY_COUNT; i++) {
udelay(10);
rxcw = er32(RXCW);
- if ((rxcw & E1000_RXCW_IV) &&
- !((rxcw & E1000_RXCW_SYNCH) &&
- (rxcw & E1000_RXCW_C))) {
+ if ((rxcw & E1000_RXCW_SYNCH) &&
+ (rxcw & E1000_RXCW_C))
+ continue;
+
+ if (rxcw & E1000_RXCW_IV) {
mac->serdes_has_link = false;
mac->serdes_link_state =
e1000_serdes_link_down;
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 6e6fffb34581..cd153326c3cf 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -514,6 +514,7 @@ extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
+extern void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr);
extern unsigned int copybreak;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 905e2147d918..105d554ea9db 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1897,7 +1897,6 @@ static int e1000_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
((ec->rx_coalesce_usecs > 4) &&
@@ -1916,9 +1915,9 @@ static int e1000_set_coalesce(struct net_device *netdev,
}
if (adapter->itr_setting != 0)
- ew32(ITR, 1000000000 / (adapter->itr * 256));
+ e1000e_write_itr(adapter, adapter->itr);
else
- ew32(ITR, 0);
+ e1000e_write_itr(adapter, 0);
return 0;
}
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 623e30b9964d..95b245310f17 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2159,7 +2159,7 @@ void e1000e_release_hw_control(struct e1000_adapter *adapter)
}
/**
- * @e1000_alloc_ring - allocate memory for a ring structure
+ * e1000_alloc_ring_dma - allocate memory for a ring structure
**/
static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
struct e1000_ring *ring)
@@ -2474,6 +2474,30 @@ set_itr_now:
}
/**
+ * e1000e_write_itr - write the ITR value to the appropriate registers
+ * @adapter: address of board private structure
+ * @itr: new ITR value to program
+ *
+ * e1000e_write_itr determines if the adapter is in MSI-X mode
+ * and, if so, writes the EITR registers with the ITR value.
+ * Otherwise, it writes the ITR value into the ITR register.
+ **/
+void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 new_itr = itr ? 1000000000 / (itr * 256) : 0;
+
+ if (adapter->msix_entries) {
+ int vector;
+
+ for (vector = 0; vector < adapter->num_vectors; vector++)
+ writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector));
+ } else {
+ ew32(ITR, new_itr);
+ }
+}
+
+/**
* e1000_alloc_queues - Allocate memory for all rings
* @adapter: board private structure to initialize
**/
@@ -3059,7 +3083,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/* irq moderation */
ew32(RADV, adapter->rx_abs_int_delay);
if ((adapter->itr_setting != 0) && (adapter->itr != 0))
- ew32(ITR, 1000000000 / (adapter->itr * 256));
+ e1000e_write_itr(adapter, adapter->itr);
ctrl_ext = er32(CTRL_EXT);
/* Auto-Mask interrupts upon ICR access */
@@ -3486,14 +3510,14 @@ void e1000e_reset(struct e1000_adapter *adapter)
dev_info(&adapter->pdev->dev,
"Interrupt Throttle Rate turned off\n");
adapter->flags2 |= FLAG2_DISABLE_AIM;
- ew32(ITR, 0);
+ e1000e_write_itr(adapter, 0);
}
} else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
dev_info(&adapter->pdev->dev,
"Interrupt Throttle Rate turned on\n");
adapter->flags2 &= ~FLAG2_DISABLE_AIM;
adapter->itr = 20000;
- ew32(ITR, 1000000000 / (adapter->itr * 256));
+ e1000e_write_itr(adapter, adapter->itr);
}
}
@@ -4576,7 +4600,7 @@ link_up:
adapter->gorc - adapter->gotc) / 10000;
u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
- ew32(ITR, 1000000000 / (itr * 256));
+ e1000e_write_itr(adapter, itr);
}
/* Cause software interrupt to ensure Rx ring is cleaned */
@@ -6191,7 +6215,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
- e_info("PHY reset is blocked due to SOL/IDER session.\n");
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
netdev->features = (NETIF_F_SG |
@@ -6241,7 +6266,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break;
if (i == 2) {
- e_err("The NVM Checksum Is Not Valid\n");
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
@@ -6251,13 +6276,15 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* copy the MAC address */
if (e1000e_read_mac_addr(&adapter->hw))
- e_err("NVM Read Error while reading MAC address\n");
+ dev_err(&pdev->dev,
+ "NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
- e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
+ dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
+ netdev->perm_addr);
err = -EIO;
goto err_eeprom;
}
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 55cc1565bc2f..dfbfa7fd98c3 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -199,16 +199,19 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- e_info("%s Enabled\n", opt->name);
+ dev_info(&adapter->pdev->dev, "%s Enabled\n",
+ opt->name);
return 0;
case OPTION_DISABLED:
- e_info("%s Disabled\n", opt->name);
+ dev_info(&adapter->pdev->dev, "%s Disabled\n",
+ opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- e_info("%s set to %i\n", opt->name, *value);
+ dev_info(&adapter->pdev->dev, "%s set to %i\n",
+ opt->name, *value);
return 0;
}
break;
@@ -220,7 +223,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- e_info("%s\n", ent->str);
+ dev_info(&adapter->pdev->dev, "%s\n",
+ ent->str);
return 0;
}
}
@@ -230,8 +234,8 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}
- e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
- opt->err);
+ dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -251,8 +255,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) {
- e_notice("Warning: no configuration for board #%i\n", bd);
- e_notice("Using defaults for all values\n");
+ dev_notice(&adapter->pdev->dev,
+ "Warning: no configuration for board #%i\n", bd);
+ dev_notice(&adapter->pdev->dev,
+ "Using defaults for all values\n");
}
{ /* Transmit Interrupt Delay */
@@ -366,27 +372,32 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
* default values
*/
if (adapter->itr > 4)
- e_info("%s set to default %d\n", opt.name,
- adapter->itr);
+ dev_info(&adapter->pdev->dev,
+ "%s set to default %d\n", opt.name,
+ adapter->itr);
}
adapter->itr_setting = adapter->itr;
switch (adapter->itr) {
case 0:
- e_info("%s turned off\n", opt.name);
+ dev_info(&adapter->pdev->dev, "%s turned off\n",
+ opt.name);
break;
case 1:
- e_info("%s set to dynamic mode\n", opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic mode\n", opt.name);
adapter->itr = 20000;
break;
case 3:
- e_info("%s set to dynamic conservative mode\n",
- opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
adapter->itr = 20000;
break;
case 4:
- e_info("%s set to simplified (2000-8000 ints) mode\n",
- opt.name);
+ dev_info(&adapter->pdev->dev,
+ "%s set to simplified (2000-8000 ints) mode\n",
+ opt.name);
break;
default:
/*