diff options
Diffstat (limited to 'drivers/net/ethernet/i825xx/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/i825xx/Kconfig | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig new file mode 100644 index 000000000000..2be46986cbe2 --- /dev/null +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -0,0 +1,183 @@ +# +# Intel 82596/82593/82596 network device configuration +# + +config NET_VENDOR_I825XX + bool "Intel (82586/82593/82596) devices" + default y + depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \ + ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ + GSC || BVME6000 || MVME16x || EXPERIMENTAL) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question does not directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about these devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_I825XX + +config ELPLUS + tristate "3c505 \"EtherLink Plus\" support" + depends on ISA && ISA_DMA_API + ---help--- + Information about this network (Ethernet) card can be found in + <file:Documentation/networking/3c505.txt>. If you have a card of + this type, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c505. + +config EL16 + tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" + depends on ISA && EXPERIMENTAL + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c507. + +config ELMC + tristate "3c523 \"EtherLink/MC\" support" + depends on MCA_LEGACY + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c523. + +config ELMC_II + tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" + depends on MCA && MCA_LEGACY + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c527. + +config ARM_ETHER1 + tristate "Acorn Ether1 support" + depends on ARM && ARCH_ACORN + ---help--- + If you have an Acorn system with one of these (AKA25) network cards, + you should say Y to this option if you wish to use it with Linux. + +config APRICOT + tristate "Apricot Xen-II on board Ethernet" + depends on ISA + ---help--- + If you have a network (Ethernet) controller of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called apricot. + +config BVME6000_NET + tristate "BVME6000 Ethernet support" + depends on BVME6000MVME16x + ---help--- + This is the driver for the Ethernet interface on BVME4000 and + BVME6000 VME boards. Say Y here to include the driver for this chip + in your kernel. + To compile this driver as a module, choose M here. + +config EEXPRESS + tristate "EtherExpress 16 support" + depends on ISA + ---help--- + If you have an EtherExpress16 network (Ethernet) card, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Note that the Intel + EtherExpress16 card used to be regarded as a very poor choice + because the driver was very unreliable. We now have a new driver + that should do better. + + To compile this driver as a module, choose M here. The module + will be called eexpress. + +config EEXPRESS_PRO + tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" + depends on ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y. This + driver supports Intel i82595{FX,TX} based boards. Note however + that the EtherExpress PRO/100 Ethernet card has its own separate + driver. Please read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called eepro. + +config LASI_82596 + tristate "Lasi ethernet" + depends on GSC + ---help--- + Say Y here to support the builtin Intel 82596 ethernet controller + found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet. + +config LP486E + tristate "LP486E on board Ethernet" + depends on ISA + ---help--- + Say Y here to support the 82596-based on-board Ethernet controller + for the Panther motherboard, which is one of the two shipped in the + Intel Professional Workstation. + +config MVME16x_NET + tristate "MVME16x Ethernet support" + depends on MVME16x + ---help--- + This is the driver for the Ethernet interface on the Motorola + MVME162, 166, 167, 172 and 177 boards. Say Y here to include the + driver for this chip in your kernel. + To compile this driver as a module, choose M here. + +config NI52 + tristate "NI5210 support" + depends on ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called ni52. + +config SNI_82596 + tristate "SNI RM ethernet" + depends on SNI_RM + ---help--- + Say Y here to support the on-board Intel 82596 ethernet controller + built into SNI RM machines. + +config SUN3_82586 + bool "Sun3 on-board Intel 82586 support" + depends on SUN3 + ---help--- + This driver enables support for the on-board Intel 82586 based + Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note + that this driver does not support 82586-based adapters on additional + VME boards. + +config ZNET + tristate "Zenith Z-Note support (EXPERIMENTAL)" + depends on EXPERIMENTAL && ISA_DMA_API + ---help--- + The Zenith Z-Note notebook computer has a built-in network + (Ethernet) card, and this is the Linux driver for it. Note that the + IBM Thinkpad 300 is compatible with the Z-Note and is also supported + by this driver. Read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +endif # NET_VENDOR_I825XX |