diff options
Diffstat (limited to 'drivers/net/ethernet/hisilicon/hns_mdio.c')
| -rw-r--r-- | drivers/net/ethernet/hisilicon/hns_mdio.c | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c new file mode 100644 index 000000000000..37491c85bc42 --- /dev/null +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -0,0 +1,521 @@ +/* + * Copyright (c) 2014-2015 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/errno.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/netdevice.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spinlock_types.h> + +#define MDIO_DRV_NAME "Hi-HNS_MDIO" +#define MDIO_BUS_NAME "Hisilicon MII Bus" +#define MDIO_DRV_VERSION "1.3.0" +#define MDIO_COPYRIGHT "Copyright(c) 2015 Huawei Corporation." +#define MDIO_DRV_STRING MDIO_BUS_NAME +#define MDIO_DEFAULT_DEVICE_DESCR MDIO_BUS_NAME + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) + +#define MDIO_TIMEOUT 1000000 + +struct hns_mdio_device { + void *vbase; /* mdio reg base address */ + struct regmap *subctrl_vbase; +}; + +/* mdio reg */ +#define MDIO_COMMAND_REG 0x0 +#define MDIO_ADDR_REG 0x4 +#define MDIO_WDATA_REG 0x8 +#define MDIO_RDATA_REG 0xc +#define MDIO_STA_REG 0x10 + +/* cfg phy bit map */ +#define MDIO_CMD_DEVAD_M 0x1f +#define MDIO_CMD_DEVAD_S 0 +#define MDIO_CMD_PRTAD_M 0x1f +#define MDIO_CMD_PRTAD_S 5 +#define MDIO_CMD_OP_M 0x3 +#define MDIO_CMD_OP_S 10 +#define MDIO_CMD_ST_M 0x3 +#define MDIO_CMD_ST_S 12 +#define MDIO_CMD_START_B 14 + +#define MDIO_ADDR_DATA_M 0xffff +#define MDIO_ADDR_DATA_S 0 + +#define MDIO_WDATA_DATA_M 0xffff +#define MDIO_WDATA_DATA_S 0 + +#define MDIO_RDATA_DATA_M 0xffff +#define MDIO_RDATA_DATA_S 0 + +#define MDIO_STATE_STA_B 0 + +enum mdio_st_clause { + MDIO_ST_CLAUSE_45 = 0, + MDIO_ST_CLAUSE_22 +}; + +enum mdio_c22_op_seq { + MDIO_C22_WRITE = 1, + MDIO_C22_READ = 2 +}; + +enum mdio_c45_op_seq { + MDIO_C45_WRITE_ADDR = 0, + MDIO_C45_WRITE_DATA, + MDIO_C45_READ_INCREMENT, + MDIO_C45_READ +}; + +/* peri subctrl reg */ +#define MDIO_SC_CLK_EN 0x338 +#define MDIO_SC_CLK_DIS 0x33C +#define MDIO_SC_RESET_REQ 0xA38 +#define MDIO_SC_RESET_DREQ 0xA3C +#define MDIO_SC_CTRL 0x2010 +#define MDIO_SC_CLK_ST 0x531C +#define MDIO_SC_RESET_ST 0x5A1C + +static void mdio_write_reg(void *base, u32 reg, u32 value) +{ + u8 __iomem *reg_addr = (u8 __iomem *)base; + + writel_relaxed(value, reg_addr + reg); +} + +#define MDIO_WRITE_REG(a, reg, value) \ + mdio_write_reg((a)->vbase, (reg), (value)) + +static u32 mdio_read_reg(void *base, u32 reg) +{ + u8 __iomem *reg_addr = (u8 __iomem *)base; + + return readl_relaxed(reg_addr + reg); +} + +#define mdio_set_field(origin, mask, shift, val) \ + do { \ + (origin) &= (~((mask) << (shift))); \ + (origin) |= (((val) & (mask)) << (shift)); \ + } while (0) + +#define mdio_get_field(origin, mask, shift) (((origin) >> (shift)) & (mask)) + +static void mdio_set_reg_field(void *base, u32 reg, u32 mask, u32 shift, + u32 val) +{ + u32 origin = mdio_read_reg(base, reg); + + mdio_set_field(origin, mask, shift, val); + mdio_write_reg(base, reg, origin); +} + +#define MDIO_SET_REG_FIELD(dev, reg, mask, shift, val) \ + mdio_set_reg_field((dev)->vbase, (reg), (mask), (shift), (val)) + +static u32 mdio_get_reg_field(void *base, u32 reg, u32 mask, u32 shift) +{ + u32 origin; + + origin = mdio_read_reg(base, reg); + return mdio_get_field(origin, mask, shift); +} + +#define MDIO_GET_REG_FIELD(dev, reg, mask, shift) \ + mdio_get_reg_field((dev)->vbase, (reg), (mask), (shift)) + +#define MDIO_GET_REG_BIT(dev, reg, bit) \ + mdio_get_reg_field((dev)->vbase, (reg), 0x1ull, (bit)) + +#define MDIO_CHECK_SET_ST 1 +#define MDIO_CHECK_CLR_ST 0 + +static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev, + u32 cfg_reg, u32 set_val, + u32 st_reg, u32 st_msk, u8 check_st) +{ + u32 time_cnt; + u32 reg_value; + + regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val); + + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + regmap_read(mdio_dev->subctrl_vbase, st_reg, ®_value); + reg_value &= st_msk; + if ((!!check_st) == (!!reg_value)) + break; + } + + if ((!!check_st) != (!!reg_value)) + return -EBUSY; + + return 0; +} + +static int hns_mdio_wait_ready(struct mii_bus *bus) +{ + struct hns_mdio_device *mdio_dev = bus->priv; + int i; + u32 cmd_reg_value = 1; + + /* waitting for MDIO_COMMAND_REG 's mdio_start==0 */ + /* after that can do read or write*/ + for (i = 0; cmd_reg_value; i++) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (i == MDIO_TIMEOUT) + return -ETIMEDOUT; + } + + return 0; +} + +static void hns_mdio_cmd_write(struct hns_mdio_device *mdio_dev, + u8 is_c45, u8 op, u8 phy_id, u16 cmd) +{ + u32 cmd_reg_value; + u8 st = is_c45 ? MDIO_ST_CLAUSE_45 : MDIO_ST_CLAUSE_22; + + cmd_reg_value = st << MDIO_CMD_ST_S; + cmd_reg_value |= op << MDIO_CMD_OP_S; + cmd_reg_value |= + (phy_id & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + cmd_reg_value |= (cmd & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); +} + +/** + * hns_mdio_write - access phy register + * @bus: mdio bus + * @phy_id: phy id + * @regnum: register num + * @value: register value + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_write(struct mii_bus *bus, + int phy_id, int regnum, u16 data) +{ + int ret; + struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv; + u8 devad = ((regnum >> 16) & 0x1f); + u8 is_c45 = !!(regnum & MII_ADDR_C45); + u16 reg = (u16)(regnum & 0xffff); + u8 op; + u16 cmd_reg_cfg; + + dev_dbg(&bus->dev, "mdio write %s,base is %p\n", + bus->id, mdio_dev->vbase); + dev_dbg(&bus->dev, "phy id=%d, is_c45=%d, devad=%d, reg=%#x, write data=%d\n", + phy_id, is_c45, devad, reg, data); + + /* wait for ready */ + ret = hns_mdio_wait_ready(bus); + if (ret) { + dev_err(&bus->dev, "MDIO bus is busy\n"); + return ret; + } + + if (!is_c45) { + cmd_reg_cfg = reg; + op = MDIO_C22_WRITE; + } else { + /* config the cmd-reg to write addr*/ + MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M, + MDIO_ADDR_DATA_S, reg); + + hns_mdio_cmd_write(mdio_dev, is_c45, + MDIO_C45_WRITE_ADDR, phy_id, devad); + + /* check for read or write opt is finished */ + ret = hns_mdio_wait_ready(bus); + if (ret) { + dev_err(&bus->dev, "MDIO bus is busy\n"); + return ret; + } + + /* config the data needed writing */ + cmd_reg_cfg = devad; + op = MDIO_C45_WRITE_ADDR; + } + + MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M, + MDIO_WDATA_DATA_S, data); + + hns_mdio_cmd_write(mdio_dev, is_c45, op, phy_id, cmd_reg_cfg); + + return 0; +} + +/** + * hns_mdio_read - access phy register + * @bus: mdio bus + * @phy_id: phy id + * @regnum: register num + * @value: register value + * + * Return phy register value + */ +static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum) +{ + int ret; + u16 reg_val = 0; + u8 devad = ((regnum >> 16) & 0x1f); + u8 is_c45 = !!(regnum & MII_ADDR_C45); + u16 reg = (u16)(regnum & 0xffff); + struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv; + + dev_dbg(&bus->dev, "mdio read %s,base is %p\n", + bus->id, mdio_dev->vbase); + dev_dbg(&bus->dev, "phy id=%d, is_c45=%d, devad=%d, reg=%#x!\n", + phy_id, is_c45, devad, reg); + + /* Step 1: wait for ready */ + ret = hns_mdio_wait_ready(bus); + if (ret) { + dev_err(&bus->dev, "MDIO bus is busy\n"); + return ret; + } + + if (!is_c45) { + hns_mdio_cmd_write(mdio_dev, is_c45, + MDIO_C22_READ, phy_id, reg); + } else { + MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M, + MDIO_ADDR_DATA_S, reg); + + /* Step 2; config the cmd-reg to write addr*/ + hns_mdio_cmd_write(mdio_dev, is_c45, + MDIO_C45_WRITE_ADDR, phy_id, devad); + + /* Step 3: check for read or write opt is finished */ + ret = hns_mdio_wait_ready(bus); + if (ret) { + dev_err(&bus->dev, "MDIO bus is busy\n"); + return ret; + } + + hns_mdio_cmd_write(mdio_dev, is_c45, + MDIO_C45_WRITE_ADDR, phy_id, devad); + } + + /* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/ + /* check for read or write opt is finished */ + ret = hns_mdio_wait_ready(bus); + if (ret) { + dev_err(&bus->dev, "MDIO bus is busy\n"); + return ret; + } + + reg_val = MDIO_GET_REG_BIT(mdio_dev, MDIO_STA_REG, MDIO_STATE_STA_B); + if (reg_val) { + dev_err(&bus->dev, " ERROR! MDIO Read failed!\n"); + return -EBUSY; + } + + /* Step 6; get out data*/ + reg_val = (u16)MDIO_GET_REG_FIELD(mdio_dev, MDIO_RDATA_REG, + MDIO_RDATA_DATA_M, MDIO_RDATA_DATA_S); + + return reg_val; +} + +/** + * hns_mdio_reset - reset mdio bus + * @bus: mdio bus + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_reset(struct mii_bus *bus) +{ + struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv; + int ret; + + if (!mdio_dev->subctrl_vbase) { + dev_err(&bus->dev, "mdio sys ctl reg has not maped\n"); + return -ENODEV; + } + + /*1. reset req, and read reset st check*/ + ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_REQ, 0x1, + MDIO_SC_RESET_ST, 0x1, + MDIO_CHECK_SET_ST); + if (ret) { + dev_err(&bus->dev, "MDIO reset fail\n"); + return ret; + } + + /*2. dis clk, and read clk st check*/ + ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_DIS, + 0x1, MDIO_SC_CLK_ST, 0x1, + MDIO_CHECK_CLR_ST); + if (ret) { + dev_err(&bus->dev, "MDIO dis clk fail\n"); + return ret; + } + + /*3. reset dreq, and read reset st check*/ + ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_RESET_DREQ, 0x1, + MDIO_SC_RESET_ST, 0x1, + MDIO_CHECK_CLR_ST); + if (ret) { + dev_err(&bus->dev, "MDIO dis clk fail\n"); + return ret; + } + + /*4. en clk, and read clk st check*/ + ret = mdio_sc_cfg_reg_write(mdio_dev, MDIO_SC_CLK_EN, + 0x1, MDIO_SC_CLK_ST, 0x1, + MDIO_CHECK_SET_ST); + if (ret) + dev_err(&bus->dev, "MDIO en clk fail\n"); + + return ret; +} + +/** + * hns_mdio_bus_name - get mdio bus name + * @name: mdio bus name + * @np: mdio device node pointer + */ +static void hns_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *addr; + u64 taddr = OF_BAD_ADDR; + + addr = of_get_address(np, 0, NULL, NULL); + if (addr) + taddr = of_translate_address(np, addr); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name, + (unsigned long long)taddr); +} + +/** + * hns_mdio_probe - probe mdio device + * @pdev: mdio platform device + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct hns_mdio_device *mdio_dev; + struct mii_bus *new_bus; + struct resource *res; + int ret; + + if (!pdev) { + dev_err(NULL, "pdev is NULL!\r\n"); + return -ENODEV; + } + np = pdev->dev.of_node; + mdio_dev = devm_kzalloc(&pdev->dev, sizeof(*mdio_dev), GFP_KERNEL); + if (!mdio_dev) + return -ENOMEM; + + new_bus = devm_mdiobus_alloc(&pdev->dev); + if (!new_bus) { + dev_err(&pdev->dev, "mdiobus_alloc fail!\n"); + return -ENOMEM; + } + + new_bus->name = MDIO_BUS_NAME; + new_bus->read = hns_mdio_read; + new_bus->write = hns_mdio_write; + new_bus->reset = hns_mdio_reset; + new_bus->priv = mdio_dev; + hns_mdio_bus_name(new_bus->id, np); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdio_dev->vbase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mdio_dev->vbase)) { + ret = PTR_ERR(mdio_dev->vbase); + return ret; + } + + mdio_dev->subctrl_vbase = + syscon_node_to_regmap(of_parse_phandle(np, "subctrl_vbase", 0)); + if (IS_ERR(mdio_dev->subctrl_vbase)) { + dev_warn(&pdev->dev, "no syscon hisilicon,peri-c-subctrl\n"); + mdio_dev->subctrl_vbase = NULL; + } + new_bus->irq = devm_kcalloc(&pdev->dev, PHY_MAX_ADDR, + sizeof(int), GFP_KERNEL); + if (!new_bus->irq) + return -ENOMEM; + + new_bus->parent = &pdev->dev; + platform_set_drvdata(pdev, new_bus); + + ret = of_mdiobus_register(new_bus, np); + if (ret) { + dev_err(&pdev->dev, "Cannot register as MDIO bus!\n"); + platform_set_drvdata(pdev, NULL); + return ret; + } + + return 0; +} + +/** + * hns_mdio_remove - remove mdio device + * @pdev: mdio platform device + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus; + + bus = platform_get_drvdata(pdev); + + mdiobus_unregister(bus); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static const struct of_device_id hns_mdio_match[] = { + {.compatible = "hisilicon,mdio"}, + {.compatible = "hisilicon,hns-mdio"}, + {} +}; + +static struct platform_driver hns_mdio_driver = { + .probe = hns_mdio_probe, + .remove = hns_mdio_remove, + .driver = { + .name = MDIO_DRV_NAME, + .of_match_table = hns_mdio_match, + }, +}; + +module_platform_driver(hns_mdio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Huawei Tech. Co., Ltd."); +MODULE_DESCRIPTION("Hisilicon HNS MDIO driver"); +MODULE_ALIAS("platform:" MDIO_DRV_NAME); |