diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/fsl_pq_mdio.c')
| -rw-r--r-- | drivers/net/ethernet/freescale/fsl_pq_mdio.c | 57 |
1 files changed, 34 insertions, 23 deletions
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 583e71ab7f51..d1a91e344e6b 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -28,7 +28,9 @@ #include <linux/of_device.h> #include <asm/io.h> +#if IS_ENABLED(CONFIG_UCC_GETH) #include <asm/ucc.h> /* for ucc_set_qe_mux_mii_mng() */ +#endif #include "gianfar.h" @@ -102,19 +104,22 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, { struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mii __iomem *regs = priv->regs; - u32 status; + unsigned int timeout; /* Set the PHY address and the register address we want to write */ - out_be32(®s->miimadd, (mii_id << 8) | regnum); + iowrite32be((mii_id << 8) | regnum, ®s->miimadd); /* Write out the value we want */ - out_be32(®s->miimcon, value); + iowrite32be(value, ®s->miimcon); /* Wait for the transaction to finish */ - status = spin_event_timeout(!(in_be32(®s->miimind) & MIIMIND_BUSY), - MII_TIMEOUT, 0); + timeout = MII_TIMEOUT; + while ((ioread32be(®s->miimind) & MIIMIND_BUSY) && timeout) { + cpu_relax(); + timeout--; + } - return status ? 0 : -ETIMEDOUT; + return timeout ? 0 : -ETIMEDOUT; } /* @@ -131,25 +136,29 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mii __iomem *regs = priv->regs; - u32 status; + unsigned int timeout; u16 value; /* Set the PHY address and the register address we want to read */ - out_be32(®s->miimadd, (mii_id << 8) | regnum); + iowrite32be((mii_id << 8) | regnum, ®s->miimadd); /* Clear miimcom, and then initiate a read */ - out_be32(®s->miimcom, 0); - out_be32(®s->miimcom, MII_READ_COMMAND); + iowrite32be(0, ®s->miimcom); + iowrite32be(MII_READ_COMMAND, ®s->miimcom); /* Wait for the transaction to finish, normally less than 100us */ - status = spin_event_timeout(!(in_be32(®s->miimind) & - (MIIMIND_NOTVALID | MIIMIND_BUSY)), - MII_TIMEOUT, 0); - if (!status) + timeout = MII_TIMEOUT; + while ((ioread32be(®s->miimind) & + (MIIMIND_NOTVALID | MIIMIND_BUSY)) && timeout) { + cpu_relax(); + timeout--; + } + + if (!timeout) return -ETIMEDOUT; /* Grab the value of the register from miimstat */ - value = in_be32(®s->miimstat); + value = ioread32be(®s->miimstat); dev_dbg(&bus->dev, "read %04x from address %x/%x\n", value, mii_id, regnum); return value; @@ -160,23 +169,26 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) { struct fsl_pq_mdio_priv *priv = bus->priv; struct fsl_pq_mii __iomem *regs = priv->regs; - u32 status; + unsigned int timeout; mutex_lock(&bus->mdio_lock); /* Reset the management interface */ - out_be32(®s->miimcfg, MIIMCFG_RESET); + iowrite32be(MIIMCFG_RESET, ®s->miimcfg); /* Setup the MII Mgmt clock speed */ - out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE); + iowrite32be(MIIMCFG_INIT_VALUE, ®s->miimcfg); /* Wait until the bus is free */ - status = spin_event_timeout(!(in_be32(®s->miimind) & MIIMIND_BUSY), - MII_TIMEOUT, 0); + timeout = MII_TIMEOUT; + while ((ioread32be(®s->miimind) & MIIMIND_BUSY) && timeout) { + cpu_relax(); + timeout--; + } mutex_unlock(&bus->mdio_lock); - if (!status) { + if (!timeout) { dev_err(&bus->dev, "timeout waiting for MII bus\n"); return -EBUSY; } @@ -433,7 +445,7 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) tbipa = data->get_tbipa(priv->map); - out_be32(tbipa, be32_to_cpup(prop)); + iowrite32be(be32_to_cpup(prop), tbipa); } } @@ -476,7 +488,6 @@ static int fsl_pq_mdio_remove(struct platform_device *pdev) static struct platform_driver fsl_pq_mdio_driver = { .driver = { .name = "fsl-pq_mdio", - .owner = THIS_MODULE, .of_match_table = fsl_pq_mdio_match, }, .probe = fsl_pq_mdio_probe, |