diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/fec_main.c')
-rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 41 |
1 files changed, 37 insertions, 4 deletions
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 610573855213..7a7f3a42b2aa 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -195,7 +195,8 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); * account when setting it. */ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \ + defined(CONFIG_ARM64) #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) #else #define OPT_FRAME_SIZE 0 @@ -818,6 +819,12 @@ static void fec_enet_bd_init(struct net_device *dev) for (i = 0; i < txq->bd.ring_size; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = cpu_to_fec16(0); + if (bdp->cbd_bufaddr && + !IS_TSO_HEADER(txq, fec32_to_cpu(bdp->cbd_bufaddr))) + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), + DMA_TO_DEVICE); if (txq->tx_skbuff[i]) { dev_kfree_skb_any(txq->tx_skbuff[i]); txq->tx_skbuff[i] = NULL; @@ -1862,6 +1869,8 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable) ret = clk_prepare_enable(fep->clk_ref); if (ret) goto failed_clk_ref; + + phy_reset_after_clk_enable(ndev->phydev); } else { clk_disable_unprepare(fep->clk_ahb); clk_disable_unprepare(fep->clk_enet_out); @@ -2101,7 +2110,8 @@ static int fec_enet_get_regs_len(struct net_device *ndev) /* List of registers that can be safety be read to dump them with ethtool */ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \ + defined(CONFIG_ARM64) static u32 fec_enet_register_offset[] = { FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0, FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL, @@ -2834,6 +2844,7 @@ fec_enet_open(struct net_device *ndev) { struct fec_enet_private *fep = netdev_priv(ndev); int ret; + bool reset_again; ret = pm_runtime_get_sync(&fep->pdev->dev); if (ret < 0) @@ -2844,6 +2855,17 @@ fec_enet_open(struct net_device *ndev) if (ret) goto clk_enable; + /* During the first fec_enet_open call the PHY isn't probed at this + * point. Therefore the phy_reset_after_clk_enable() call within + * fec_enet_clk_enable() fails. As we need this reset in order to be + * sure the PHY is working correctly we check if we need to reset again + * later when the PHY is probed + */ + if (ndev->phydev && ndev->phydev->drv) + reset_again = false; + else + reset_again = true; + /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ @@ -2860,6 +2882,12 @@ fec_enet_open(struct net_device *ndev) if (ret) goto err_enet_mii_probe; + /* Call phy_reset_after_clk_enable() again if it failed during + * phy_reset_after_clk_enable() before because the PHY wasn't probed. + */ + if (reset_again) + phy_reset_after_clk_enable(ndev->phydev); + if (fep->quirks & FEC_QUIRK_ERR006687) imx6q_cpuidle_fec_irqs_used(); @@ -3113,7 +3141,7 @@ static int fec_enet_init(struct net_device *ndev) unsigned dsize_log2 = __fls(dsize); WARN_ON(dsize != (1 << dsize_log2)); -#if defined(CONFIG_ARM) +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) fep->rx_align = 0xf; fep->tx_align = 0xf; #else @@ -3463,6 +3491,10 @@ fec_probe(struct platform_device *pdev) goto failed_regulator; } } else { + if (PTR_ERR(fep->reg_phy) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto failed_regulator; + } fep->reg_phy = NULL; } @@ -3546,8 +3578,9 @@ failed_clk_ipg: failed_clk: if (of_phy_is_fixed_link(np)) of_phy_deregister_fixed_link(np); -failed_phy: of_node_put(phy_node); +failed_phy: + dev_id--; failed_ioremap: free_netdev(ndev); |