diff options
Diffstat (limited to 'drivers/net/ethernet/cavium/thunder/thunder_xcv.c')
| -rw-r--r-- | drivers/net/ethernet/cavium/thunder/thunder_xcv.c | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_xcv.c b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c new file mode 100644 index 000000000000..67befedef709 --- /dev/null +++ b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2016 Cavium, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> + +#include "nic.h" +#include "thunder_bgx.h" + +#define DRV_NAME "thunder-xcv" +#define DRV_VERSION "1.0" + +/* Register offsets */ +#define XCV_RESET 0x00 +#define PORT_EN BIT_ULL(63) +#define CLK_RESET BIT_ULL(15) +#define DLL_RESET BIT_ULL(11) +#define COMP_EN BIT_ULL(7) +#define TX_PKT_RESET BIT_ULL(3) +#define TX_DATA_RESET BIT_ULL(2) +#define RX_PKT_RESET BIT_ULL(1) +#define RX_DATA_RESET BIT_ULL(0) +#define XCV_DLL_CTL 0x10 +#define CLKRX_BYP BIT_ULL(23) +#define CLKTX_BYP BIT_ULL(15) +#define XCV_COMP_CTL 0x20 +#define DRV_BYP BIT_ULL(63) +#define XCV_CTL 0x30 +#define XCV_INT 0x40 +#define XCV_INT_W1S 0x48 +#define XCV_INT_ENA_W1C 0x50 +#define XCV_INT_ENA_W1S 0x58 +#define XCV_INBND_STATUS 0x80 +#define XCV_BATCH_CRD_RET 0x100 + +struct xcv { + void __iomem *reg_base; + struct pci_dev *pdev; +}; + +static struct xcv *xcv; + +/* Supported devices */ +static const struct pci_device_id xcv_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA056) }, + { 0, } /* end of table */ +}; + +MODULE_AUTHOR("Cavium Inc"); +MODULE_DESCRIPTION("Cavium Thunder RGX/XCV Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, xcv_id_table); + +void xcv_init_hw(void) +{ + u64 cfg; + + /* Take DLL out of reset */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg &= ~DLL_RESET; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + + /* Take clock tree out of reset */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg &= ~CLK_RESET; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + /* Wait for DLL to lock */ + msleep(1); + + /* Configure DLL - enable or bypass + * TX no bypass, RX bypass + */ + cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); + cfg &= ~0xFF03; + cfg |= CLKRX_BYP; + writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); + + /* Enable compensation controller and force the + * write to be visible to HW by readig back. + */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg |= COMP_EN; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + readq_relaxed(xcv->reg_base + XCV_RESET); + /* Wait for compensation state machine to lock */ + msleep(10); + + /* enable the XCV block */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg |= PORT_EN; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg |= CLK_RESET; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); +} +EXPORT_SYMBOL(xcv_init_hw); + +void xcv_setup_link(bool link_up, int link_speed) +{ + u64 cfg; + int speed = 2; + + if (!xcv) { + dev_err(&xcv->pdev->dev, + "XCV init not done, probe may have failed\n"); + return; + } + + if (link_speed == 100) + speed = 1; + else if (link_speed == 10) + speed = 0; + + if (link_up) { + /* set operating speed */ + cfg = readq_relaxed(xcv->reg_base + XCV_CTL); + cfg &= ~0x03; + cfg |= speed; + writeq_relaxed(cfg, xcv->reg_base + XCV_CTL); + + /* Reset datapaths */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg |= TX_DATA_RESET | RX_DATA_RESET; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + + /* Enable the packet flow */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg |= TX_PKT_RESET | RX_PKT_RESET; + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + + /* Return credits to RGX */ + writeq_relaxed(0x01, xcv->reg_base + XCV_BATCH_CRD_RET); + } else { + /* Disable packet flow */ + cfg = readq_relaxed(xcv->reg_base + XCV_RESET); + cfg &= ~(TX_PKT_RESET | RX_PKT_RESET); + writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); + readq_relaxed(xcv->reg_base + XCV_RESET); + } +} +EXPORT_SYMBOL(xcv_setup_link); + +static int xcv_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int err; + struct device *dev = &pdev->dev; + + xcv = devm_kzalloc(dev, sizeof(struct xcv), GFP_KERNEL); + if (!xcv) + return -ENOMEM; + xcv->pdev = pdev; + + pci_set_drvdata(pdev, xcv); + + err = pci_enable_device(pdev); + if (err) { + dev_err(dev, "Failed to enable PCI device\n"); + goto err_kfree; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + dev_err(dev, "PCI request regions failed 0x%x\n", err); + goto err_disable_device; + } + + /* MAP configuration registers */ + xcv->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0); + if (!xcv->reg_base) { + dev_err(dev, "XCV: Cannot map CSR memory space, aborting\n"); + err = -ENOMEM; + goto err_release_regions; + } + + return 0; + +err_release_regions: + pci_release_regions(pdev); +err_disable_device: + pci_disable_device(pdev); +err_kfree: + devm_kfree(dev, xcv); + xcv = NULL; + return err; +} + +static void xcv_remove(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + + if (xcv) { + devm_kfree(dev, xcv); + xcv = NULL; + } + + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver xcv_driver = { + .name = DRV_NAME, + .id_table = xcv_id_table, + .probe = xcv_probe, + .remove = xcv_remove, +}; + +static int __init xcv_init_module(void) +{ + pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION); + + return pci_register_driver(&xcv_driver); +} + +static void __exit xcv_cleanup_module(void) +{ + pci_unregister_driver(&xcv_driver); +} + +module_init(xcv_init_module); +module_exit(xcv_cleanup_module); |