summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mv88e6060.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/mv88e6060.c')
-rw-r--r--drivers/net/dsa/mv88e6060.c45
1 files changed, 45 insertions, 0 deletions
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index fdda62d6eb16..294312b58e4f 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -247,11 +247,56 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
return reg_write(priv, addr, regnum, val);
}
+static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ unsigned long *interfaces = config->supported_interfaces;
+ struct mv88e6060_priv *priv = ds->priv;
+ int addr = REG_PORT(port);
+ int ret;
+
+ ret = reg_read(priv, addr, PORT_STATUS);
+ if (ret < 0) {
+ dev_err(ds->dev,
+ "port %d: unable to read status register: %pe\n",
+ port, ERR_PTR(ret));
+ return;
+ }
+
+ /* If the port is configured in SNI mode (acts as a 10Mbps PHY),
+ * it should have phy-mode = "sni", but that doesn't yet exist, so
+ * forcibly fail validation until the need arises to introduce it.
+ */
+ if (!(ret & PORT_STATUS_PORTMODE)) {
+ dev_warn(ds->dev, "port %d: SNI mode not supported\n", port);
+ return;
+ }
+
+ config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
+
+ if (port >= 4) {
+ /* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
+ __set_bit(PHY_INTERFACE_MODE_MII, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
+ }
+ if (port <= 4) {
+ /* Ports 0 to 3 have internal PHYs, and port 4 can optionally
+ * use an internal PHY.
+ */
+ /* Internal PHY */
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
+ /* Default phylib interface mode */
+ __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
+ }
+}
+
static const struct dsa_switch_ops mv88e6060_switch_ops = {
.get_tag_protocol = mv88e6060_get_tag_protocol,
.setup = mv88e6060_setup,
.phy_read = mv88e6060_phy_read,
.phy_write = mv88e6060_phy_write,
+ .phylink_get_caps = mv88e6060_phylink_get_caps,
};
static int mv88e6060_probe(struct mdio_device *mdiodev)