1 files changed, 60 insertions, 43 deletions

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a8a2c728afba..7357b4fc0185 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -621,17 +621,19 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
 	struct mt7530_priv *priv = ds->priv;
 
 	if (phy_is_pseudo_fixed_link(phydev)) {
-		dev_dbg(priv->dev, "phy-mode for master device = %x\n",
-			phydev->interface);
-
-		/* Setup TX circuit incluing relevant PAD and driving */
-		mt7530_pad_clk_setup(ds, phydev->interface);
-
-		/* Setup RX circuit, relevant PAD and driving on the host
-		 * which must be placed after the setup on the device side is
-		 * all finished.
-		 */
-		mt7623_pad_clk_setup(ds);
+		if (priv->id == ID_MT7530) {
+			dev_dbg(priv->dev, "phy-mode for master device = %x\n",
+				phydev->interface);
+
+			/* Setup TX circuit incluing relevant PAD and driving */
+			mt7530_pad_clk_setup(ds, phydev->interface);
+
+			/* Setup RX circuit, relevant PAD and driving on the
+			 * host which must be placed after the setup on the
+			 * device side is all finished.
+			 */
+			mt7623_pad_clk_setup(ds);
+		}
 	} else {
 		u16 lcl_adv = 0, rmt_adv = 0;
 		u8 flowctrl;
@@ -644,7 +646,7 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
 		case SPEED_100:
 			mcr |= PMCR_FORCE_SPEED_100;
 			break;
-		};
+		}
 
 		if (phydev->link)
 			mcr |= PMCR_FORCE_LNK;
@@ -687,6 +689,10 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv,
 	/* Unknown unicast frame fordwarding to the cpu port */
 	mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
 
+	/* Set CPU port number */
+	if (priv->id == ID_MT7621)
+		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
+
 	/* CPU port gets connected to all user ports of
 	 * the switch
 	 */
@@ -723,8 +729,7 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 }
 
 static void
-mt7530_port_disable(struct dsa_switch *ds, int port,
-		    struct phy_device *phy)
+mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
@@ -1219,24 +1224,27 @@ mt7530_setup(struct dsa_switch *ds)
 	 * as two netdev instances.
 	 */
 	dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
-	priv->ethernet = syscon_node_to_regmap(dn);
-	if (IS_ERR(priv->ethernet))
-		return PTR_ERR(priv->ethernet);
 
-	regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
-	ret = regulator_enable(priv->core_pwr);
-	if (ret < 0) {
-		dev_err(priv->dev,
-			"Failed to enable core power: %d\n", ret);
-		return ret;
-	}
+	if (priv->id == ID_MT7530) {
+		priv->ethernet = syscon_node_to_regmap(dn);
+		if (IS_ERR(priv->ethernet))
+			return PTR_ERR(priv->ethernet);
+
+		regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
+		ret = regulator_enable(priv->core_pwr);
+		if (ret < 0) {
+			dev_err(priv->dev,
+				"Failed to enable core power: %d\n", ret);
+			return ret;
+		}
 
-	regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
-	ret = regulator_enable(priv->io_pwr);
-	if (ret < 0) {
-		dev_err(priv->dev, "Failed to enable io pwr: %d\n",
-			ret);
-		return ret;
+		regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
+		ret = regulator_enable(priv->io_pwr);
+		if (ret < 0) {
+			dev_err(priv->dev, "Failed to enable io pwr: %d\n",
+				ret);
+			return ret;
+		}
 	}
 
 	/* Reset whole chip through gpio pin or memory-mapped registers for
@@ -1292,7 +1300,7 @@ mt7530_setup(struct dsa_switch *ds)
 		if (dsa_is_cpu_port(ds, i))
 			mt7530_cpu_port_enable(priv, i);
 		else
-			mt7530_port_disable(ds, i, NULL);
+			mt7530_port_disable(ds, i);
 	}
 
 	/* Flush the FDB table */
@@ -1326,6 +1334,13 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_vlan_del		= mt7530_port_vlan_del,
 };
 
+static const struct of_device_id mt7530_of_match[] = {
+	{ .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
+	{ .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7530_of_match);
+
 static int
 mt7530_probe(struct mdio_device *mdiodev)
 {
@@ -1356,13 +1371,21 @@ mt7530_probe(struct mdio_device *mdiodev)
 		}
 	}
 
-	priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-	if (IS_ERR(priv->core_pwr))
-		return PTR_ERR(priv->core_pwr);
+	/* Get the hardware identifier from the devicetree node.
+	 * We will need it for some of the clock and regulator setup.
+	 */
+	priv->id = (unsigned int)(unsigned long)
+		of_device_get_match_data(&mdiodev->dev);
+
+	if (priv->id == ID_MT7530) {
+		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+		if (IS_ERR(priv->core_pwr))
+			return PTR_ERR(priv->core_pwr);
 
-	priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
-	if (IS_ERR(priv->io_pwr))
-		return PTR_ERR(priv->io_pwr);
+		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+		if (IS_ERR(priv->io_pwr))
+			return PTR_ERR(priv->io_pwr);
+	}
 
 	/* Not MCM that indicates switch works as the remote standalone
 	 * integrated circuit so the GPIO pin would be used to complete
@@ -1408,12 +1431,6 @@ mt7530_remove(struct mdio_device *mdiodev)
 	mutex_destroy(&priv->reg_mutex);
 }
 
-static const struct of_device_id mt7530_of_match[] = {
-	{ .compatible = "mediatek,mt7530" },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, mt7530_of_match);
-
 static struct mdio_driver mt7530_mdio_driver = {
 	.probe  = mt7530_probe,
 	.remove = mt7530_remove,