diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 1200 |
1 files changed, 163 insertions, 1037 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 86b6464b4525..3b12e2dcff31 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1,1145 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Microchip switch driver main logic * - * Copyright (C) 2017 - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * Copyright (C) 2017-2018 Microchip Technology Inc. */ #include <linux/delay.h> #include <linux/export.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_data/microchip-ksz.h> #include <linux/phy.h> #include <linux/etherdevice.h> #include <linux/if_bridge.h> +#include <linux/of_gpio.h> +#include <linux/of_net.h> #include <net/dsa.h> #include <net/switchdev.h> #include "ksz_priv.h" -static const struct { - int index; - char string[ETH_GSTRING_LEN]; -} mib_names[TOTAL_SWITCH_COUNTER_NUM] = { - { 0x00, "rx_hi" }, - { 0x01, "rx_undersize" }, - { 0x02, "rx_fragments" }, - { 0x03, "rx_oversize" }, - { 0x04, "rx_jabbers" }, - { 0x05, "rx_symbol_err" }, - { 0x06, "rx_crc_err" }, - { 0x07, "rx_align_err" }, - { 0x08, "rx_mac_ctrl" }, - { 0x09, "rx_pause" }, - { 0x0A, "rx_bcast" }, - { 0x0B, "rx_mcast" }, - { 0x0C, "rx_ucast" }, - { 0x0D, "rx_64_or_less" }, - { 0x0E, "rx_65_127" }, - { 0x0F, "rx_128_255" }, - { 0x10, "rx_256_511" }, - { 0x11, "rx_512_1023" }, - { 0x12, "rx_1024_1522" }, - { 0x13, "rx_1523_2000" }, - { 0x14, "rx_2001" }, - { 0x15, "tx_hi" }, - { 0x16, "tx_late_col" }, - { 0x17, "tx_pause" }, - { 0x18, "tx_bcast" }, - { 0x19, "tx_mcast" }, - { 0x1A, "tx_ucast" }, - { 0x1B, "tx_deferred" }, - { 0x1C, "tx_total_col" }, - { 0x1D, "tx_exc_col" }, - { 0x1E, "tx_single_col" }, - { 0x1F, "tx_mult_col" }, - { 0x80, "rx_total" }, - { 0x81, "tx_total" }, - { 0x82, "rx_discards" }, - { 0x83, "tx_discards" }, -}; - -static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) -{ - u8 data; - - ksz_read8(dev, addr, &data); - if (set) - data |= bits; - else - data &= ~bits; - ksz_write8(dev, addr, data); -} - -static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) -{ - u32 data; - - ksz_read32(dev, addr, &data); - if (set) - data |= bits; - else - data &= ~bits; - ksz_write32(dev, addr, data); -} - -static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, - bool set) -{ - u32 addr; - u8 data; - - addr = PORT_CTRL_ADDR(port, offset); - ksz_read8(dev, addr, &data); - - if (set) - data |= bits; - else - data &= ~bits; - - ksz_write8(dev, addr, data); -} - -static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset, - u32 bits, bool set) -{ - u32 addr; - u32 data; - - addr = PORT_CTRL_ADDR(port, offset); - ksz_read32(dev, addr, &data); - - if (set) - data |= bits; - else - data &= ~bits; - - ksz_write32(dev, addr, data); -} - -static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout) -{ - u8 data; - - do { - ksz_read8(dev, REG_SW_VLAN_CTRL, &data); - if (!(data & waiton)) - break; - usleep_range(1, 10); - } while (timeout-- > 0); - - if (timeout <= 0) - return -ETIMEDOUT; - - return 0; -} - -static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table) -{ - struct ksz_device *dev = ds->priv; - int ret; - - mutex_lock(&dev->vlan_mutex); - - ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); - ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); - - /* wait to be cleared */ - ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000); - if (ret < 0) { - dev_dbg(dev->dev, "Failed to read vlan table\n"); - goto exit; - } - - ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); - ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); - ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); - - ksz_write8(dev, REG_SW_VLAN_CTRL, 0); - -exit: - mutex_unlock(&dev->vlan_mutex); - - return ret; -} - -static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table) -{ - struct ksz_device *dev = ds->priv; - int ret; - - mutex_lock(&dev->vlan_mutex); - - ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); - ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); - ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); - - ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); - ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); - - /* wait to be cleared */ - ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000); - if (ret < 0) { - dev_dbg(dev->dev, "Failed to write vlan table\n"); - goto exit; - } - - ksz_write8(dev, REG_SW_VLAN_CTRL, 0); - - /* update vlan cache table */ - dev->vlan_cache[vid].table[0] = vlan_table[0]; - dev->vlan_cache[vid].table[1] = vlan_table[1]; - dev->vlan_cache[vid].table[2] = vlan_table[2]; - -exit: - mutex_unlock(&dev->vlan_mutex); - - return ret; -} - -static void read_table(struct dsa_switch *ds, u32 *table) -{ - struct ksz_device *dev = ds->priv; - - ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); - ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); - ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); - ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); -} - -static void write_table(struct dsa_switch *ds, u32 *table) -{ - struct ksz_device *dev = ds->priv; - - ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); - ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); - ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); - ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); -} - -static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout) -{ - u32 data; - - do { - ksz_read32(dev, REG_SW_ALU_CTRL__4, &data); - if (!(data & waiton)) - break; - usleep_range(1, 10); - } while (timeout-- > 0); - - if (timeout <= 0) - return -ETIMEDOUT; - - return 0; -} - -static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout) -{ - u32 data; - - do { - ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data); - if (!(data & waiton)) - break; - usleep_range(1, 10); - } while (timeout-- > 0); - - if (timeout <= 0) - return -ETIMEDOUT; - - return 0; -} - -static int ksz_reset_switch(struct dsa_switch *ds) +void ksz_update_port_member(struct ksz_device *dev, int port) { - struct ksz_device *dev = ds->priv; - u8 data8; - u16 data16; - u32 data32; - - /* reset switch */ - ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); - - /* turn off SPI DO Edge select */ - ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); - data8 &= ~SPI_AUTO_EDGE_DETECTION; - ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); - - /* default configuration */ - ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); - data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | - SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); - - /* disable interrupts */ - ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); - ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); - ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); - - /* set broadcast storm protection 10% rate */ - ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16); - data16 &= ~BROADCAST_STORM_RATE; - data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; - ksz_write16(dev, REG_SW_MAC_CTRL_2, data16); - - return 0; -} - -static void port_setup(struct ksz_device *dev, int port, bool cpu_port) -{ - u8 data8; - u16 data16; - - /* enable tag tail for host port */ - if (cpu_port) - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, - true); - - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); - - /* set back pressure */ - ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); - - /* set flow control */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, - PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true); - - /* enable broadcast storm limit */ - ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - - /* disable DiffServ priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); - - /* replace priority */ - ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, - false); - ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, - MTI_PVID_REPLACE, false); - - /* enable 802.1p priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); - - /* configure MAC to 1G & RGMII mode */ - ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); - data8 |= PORT_RGMII_ID_EG_ENABLE; - data8 &= ~PORT_MII_NOT_1GBIT; - data8 &= ~PORT_MII_SEL_M; - data8 |= PORT_RGMII_SEL; - ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); - - /* clear pending interrupts */ - ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); -} - -static void ksz_config_cpu_port(struct dsa_switch *ds) -{ - struct ksz_device *dev = ds->priv; + struct ksz_port *p; int i; - ds->num_ports = dev->port_cnt; - - for (i = 0; i < ds->num_ports; i++) { - if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { - dev->cpu_port = i; - - /* enable cpu port */ - port_setup(dev, i, true); - } - } -} - -static int ksz_setup(struct dsa_switch *ds) -{ - struct ksz_device *dev = ds->priv; - int ret = 0; - - dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), - dev->num_vlans, GFP_KERNEL); - if (!dev->vlan_cache) - return -ENOMEM; - - ret = ksz_reset_switch(ds); - if (ret) { - dev_err(ds->dev, "failed to reset switch\n"); - return ret; + for (i = 0; i < dev->port_cnt; i++) { + if (i == port || i == dev->cpu_port) + continue; + p = &dev->ports[i]; + if (!(dev->member & (1 << i))) + continue; + + /* Port is a member of the bridge and is forwarding. */ + if (p->stp_state == BR_STATE_FORWARDING && + p->member != dev->member) + dev->dev_ops->cfg_port_member(dev, i, dev->member); } - - /* accept packet up to 2000bytes */ - ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); - - ksz_config_cpu_port(ds); - - ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true); - - /* queue based egress rate limit */ - ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); - - /* start switch */ - ksz_cfg(dev, REG_SW_OPERATION, SW_START, true); - - return 0; } +EXPORT_SYMBOL_GPL(ksz_update_port_member); -static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, - int port) -{ - return DSA_TAG_PROTO_KSZ; -} - -static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) +int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) { struct ksz_device *dev = ds->priv; - u16 val = 0; + u16 val = 0xffff; - ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); + dev->dev_ops->r_phy(dev, addr, reg, &val); return val; } +EXPORT_SYMBOL_GPL(ksz_phy_read16); -static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) +int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) { struct ksz_device *dev = ds->priv; - ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + dev->dev_ops->w_phy(dev, addr, reg, val); return 0; } +EXPORT_SYMBOL_GPL(ksz_phy_write16); -static int ksz_enable_port(struct dsa_switch *ds, int port, - struct phy_device *phy) +int ksz_sset_count(struct dsa_switch *ds, int port, int sset) { struct ksz_device *dev = ds->priv; - /* setup slave port */ - port_setup(dev, port, false); - - return 0; -} - -static void ksz_disable_port(struct dsa_switch *ds, int port, - struct phy_device *phy) -{ - struct ksz_device *dev = ds->priv; - - /* there is no port disable */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true); -} - -static int ksz_sset_count(struct dsa_switch *ds, int port, int sset) -{ if (sset != ETH_SS_STATS) return 0; - return TOTAL_SWITCH_COUNTER_NUM; + return dev->mib_cnt; } +EXPORT_SYMBOL_GPL(ksz_sset_count); -static void ksz_get_strings(struct dsa_switch *ds, int port, - u32 stringset, uint8_t *buf) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { - memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string, - ETH_GSTRING_LEN); - } -} - -static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *buf) +int ksz_port_bridge_join(struct dsa_switch *ds, int port, + struct net_device *br) { struct ksz_device *dev = ds->priv; - int i; - u32 data; - int timeout; - - mutex_lock(&dev->stats_mutex); - - for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { - data = MIB_COUNTER_READ; - data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S); - ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); - - timeout = 1000; - do { - ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4, - &data); - usleep_range(1, 10); - if (!(data & MIB_COUNTER_READ)) - break; - } while (timeout-- > 0); - - /* failed to read MIB. get out of loop */ - if (!timeout) { - dev_dbg(dev->dev, "Failed to get MIB\n"); - break; - } - /* count resets upon read */ - ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); + dev->br_member |= (1 << port); - dev->mib_value[i] += (uint64_t)data; - buf[i] = dev->mib_value[i]; - } - - mutex_unlock(&dev->stats_mutex); -} - -static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - struct ksz_device *dev = ds->priv; - u8 data; - - ksz_pread8(dev, port, P_STP_CTRL, &data); - data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); - - switch (state) { - case BR_STATE_DISABLED: - data |= PORT_LEARN_DISABLE; - break; - case BR_STATE_LISTENING: - data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); - break; - case BR_STATE_LEARNING: - data |= PORT_RX_ENABLE; - break; - case BR_STATE_FORWARDING: - data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); - break; - case BR_STATE_BLOCKING: - data |= PORT_LEARN_DISABLE; - break; - default: - dev_err(ds->dev, "invalid STP state: %d\n", state); - return; - } + /* port_stp_state_set() will be called after to put the port in + * appropriate state so there is no need to do anything. + */ - ksz_pwrite8(dev, port, P_STP_CTRL, data); + return 0; } +EXPORT_SYMBOL_GPL(ksz_port_bridge_join); -static void ksz_port_fast_age(struct dsa_switch *ds, int port) +void ksz_port_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *br) { struct ksz_device *dev = ds->priv; - u8 data8; - ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); - data8 |= SW_FAST_AGING; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + dev->br_member &= ~(1 << port); + dev->member &= ~(1 << port); - data8 &= ~SW_FAST_AGING; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + /* port_stp_state_set() will be called after to put the port in + * forwarding state so there is no need to do anything. + */ } +EXPORT_SYMBOL_GPL(ksz_port_bridge_leave); -static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag) +void ksz_port_fast_age(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; - if (flag) { - ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, - PORT_VLAN_LOOKUP_VID_0, true); - ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true); - ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); - } else { - ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); - ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false); - ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, - PORT_VLAN_LOOKUP_VID_0, false); - } - - return 0; + dev->dev_ops->flush_dyn_mac_table(dev, port); } +EXPORT_SYMBOL_GPL(ksz_port_fast_age); -static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) +int ksz_port_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) { /* nothing needed */ return 0; } +EXPORT_SYMBOL_GPL(ksz_port_vlan_prepare); -static void ksz_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct ksz_device *dev = ds->priv; - u32 vlan_table[3]; - u16 vid; - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - - for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - if (get_vlan_table(ds, vid, vlan_table)) { - dev_dbg(dev->dev, "Failed to get vlan table\n"); - return; - } - - vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M); - if (untagged) - vlan_table[1] |= BIT(port); - else - vlan_table[1] &= ~BIT(port); - vlan_table[1] &= ~(BIT(dev->cpu_port)); - - vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); - - if (set_vlan_table(ds, vid, vlan_table)) { - dev_dbg(dev->dev, "Failed to set vlan table\n"); - return; - } - - /* change PVID */ - if (vlan->flags & BRIDGE_VLAN_INFO_PVID) - ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid); - } -} - -static int ksz_port_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct ksz_device *dev = ds->priv; - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - u32 vlan_table[3]; - u16 vid; - u16 pvid; - - ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); - pvid = pvid & 0xFFF; - - for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - if (get_vlan_table(ds, vid, vlan_table)) { - dev_dbg(dev->dev, "Failed to get vlan table\n"); - return -ETIMEDOUT; - } - - vlan_table[2] &= ~BIT(port); - - if (pvid == vid) - pvid = 1; - - if (untagged) - vlan_table[1] &= ~BIT(port); - - if (set_vlan_table(ds, vid, vlan_table)) { - dev_dbg(dev->dev, "Failed to set vlan table\n"); - return -ETIMEDOUT; - } - } - - ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); - - return 0; -} - -struct alu_struct { - /* entry 1 */ - u8 is_static:1; - u8 is_src_filter:1; - u8 is_dst_filter:1; - u8 prio_age:3; - u32 _reserv_0_1:23; - u8 mstp:3; - /* entry 2 */ - u8 is_override:1; - u8 is_use_fid:1; - u32 _reserv_1_1:23; - u8 port_forward:7; - /* entry 3 & 4*/ - u32 _reserv_2_1:9; - u8 fid:7; - u8 mac[ETH_ALEN]; -}; - -static int ksz_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct ksz_device *dev = ds->priv; - u32 alu_table[4]; - u32 data; - int ret = 0; - - mutex_lock(&dev->alu_mutex); - - /* find any entry with mac & vid */ - data = vid << ALU_FID_INDEX_S; - data |= ((addr[0] << 8) | addr[1]); - ksz_write32(dev, REG_SW_ALU_INDEX_0, data); - - data = ((addr[2] << 24) | (addr[3] << 16)); - data |= ((addr[4] << 8) | addr[5]); - ksz_write32(dev, REG_SW_ALU_INDEX_1, data); - - /* start read operation */ - ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); - - /* wait to be finished */ - ret = wait_alu_ready(dev, ALU_START, 1000); - if (ret < 0) { - dev_dbg(dev->dev, "Failed to read ALU\n"); - goto exit; - } - - /* read ALU entry */ - read_table(ds, alu_table); - - /* update ALU entry */ - alu_table[0] = ALU_V_STATIC_VALID; - alu_table[1] |= BIT(port); - if (vid) - alu_table[1] |= ALU_V_USE_FID; - alu_table[2] = (vid << ALU_V_FID_S); - alu_table[2] |= ((addr[0] << 8) | addr[1]); - alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); - alu_table[3] |= ((addr[4] << 8) | addr[5]); - - write_table(ds, alu_table); - - ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); - - /* wait to be finished */ - ret = wait_alu_ready(dev, ALU_START, 1000); - if (ret < 0) - dev_dbg(dev->dev, "Failed to write ALU\n"); - -exit: - mutex_unlock(&dev->alu_mutex); - - return ret; -} - -static int ksz_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) +int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, + void *data) { struct ksz_device *dev = ds->priv; - u32 alu_table[4]; - u32 data; int ret = 0; - - mutex_lock(&dev->alu_mutex); - - /* read any entry with mac & vid */ - data = vid << ALU_FID_INDEX_S; - data |= ((addr[0] << 8) | addr[1]); - ksz_write32(dev, REG_SW_ALU_INDEX_0, data); - - data = ((addr[2] << 24) | (addr[3] << 16)); - data |= ((addr[4] << 8) | addr[5]); - ksz_write32(dev, REG_SW_ALU_INDEX_1, data); - - /* start read operation */ - ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); - - /* wait to be finished */ - ret = wait_alu_ready(dev, ALU_START, 1000); - if (ret < 0) { - dev_dbg(dev->dev, "Failed to read ALU\n"); - goto exit; - } - - ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); - if (alu_table[0] & ALU_V_STATIC_VALID) { - ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); - ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); - ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); - - /* clear forwarding port */ - alu_table[2] &= ~BIT(port); - - /* if there is no port to forward, clear table */ - if ((alu_table[2] & ALU_V_PORT_MAP) == 0) { - alu_table[0] = 0; - alu_table[1] = 0; - alu_table[2] = 0; - alu_table[3] = 0; - } - } else { - alu_table[0] = 0; - alu_table[1] = 0; - alu_table[2] = 0; - alu_table[3] = 0; - } - - write_table(ds, alu_table); - - ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); - - /* wait to be finished */ - ret = wait_alu_ready(dev, ALU_START, 1000); - if (ret < 0) - dev_dbg(dev->dev, "Failed to write ALU\n"); - -exit: - mutex_unlock(&dev->alu_mutex); - - return ret; -} - -static void convert_alu(struct alu_struct *alu, u32 *alu_table) -{ - alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); - alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); - alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); - alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & - ALU_V_PRIO_AGE_CNT_M; - alu->mstp = alu_table[0] & ALU_V_MSTP_M; - - alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); - alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); - alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; - - alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; - - alu->mac[0] = (alu_table[2] >> 8) & 0xFF; - alu->mac[1] = alu_table[2] & 0xFF; - alu->mac[2] = (alu_table[3] >> 24) & 0xFF; - alu->mac[3] = (alu_table[3] >> 16) & 0xFF; - alu->mac[4] = (alu_table[3] >> 8) & 0xFF; - alu->mac[5] = alu_table[3] & 0xFF; -} - -static int ksz_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct ksz_device *dev = ds->priv; - int ret = 0; - u32 ksz_data; - u32 alu_table[4]; + u16 i = 0; + u16 entries = 0; + u8 timestamp = 0; + u8 fid; + u8 member; struct alu_struct alu; - int timeout; - - mutex_lock(&dev->alu_mutex); - - /* start ALU search */ - ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); do { - timeout = 1000; - do { - ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); - if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) - break; - usleep_range(1, 10); - } while (timeout-- > 0); - - if (!timeout) { - dev_dbg(dev->dev, "Failed to search ALU\n"); - ret = -ETIMEDOUT; - goto exit; - } - - /* read ALU table */ - read_table(ds, alu_table); - - convert_alu(&alu, alu_table); - - if (alu.port_forward & BIT(port)) { + alu.is_static = false; + ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid, + &member, ×tamp, + &entries); + if (!ret && (member & BIT(port))) { ret = cb(alu.mac, alu.fid, alu.is_static, data); if (ret) - goto exit; + break; } - } while (ksz_data & ALU_START); - -exit: - - /* stop ALU search */ - ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); - - mutex_unlock(&dev->alu_mutex); + i++; + } while (i < entries); + if (i >= entries) + ret = 0; return ret; } +EXPORT_SYMBOL_GPL(ksz_port_fdb_dump); -static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) +int ksz_port_mdb_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) { /* nothing to do */ return 0; } +EXPORT_SYMBOL_GPL(ksz_port_mdb_prepare); -static void ksz_port_mdb_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) +void ksz_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) { struct ksz_device *dev = ds->priv; - u32 static_table[4]; - u32 data; + struct alu_struct alu; int index; - u32 mac_hi, mac_lo; - - mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); - mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); - mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); - - mutex_lock(&dev->alu_mutex); + int empty = 0; + alu.port_forward = 0; for (index = 0; index < dev->num_statics; index++) { - /* find empty slot first */ - data = (index << ALU_STAT_INDEX_S) | - ALU_STAT_READ | ALU_STAT_START; - ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - - /* wait to be finished */ - if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) { - dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); - goto exit; - } - - /* read ALU static table */ - read_table(ds, static_table); - - if (static_table[0] & ALU_V_STATIC_VALID) { - /* check this has same vid & mac address */ - if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) && - ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && - (static_table[3] == mac_lo)) { - /* found matching one */ + if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { + /* Found one already in static MAC table. */ + if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && + alu.fid == mdb->vid) break; - } - } else { - /* found empty one */ - break; + /* Remember the first empty entry. */ + } else if (!empty) { + empty = index + 1; } } /* no available entry */ - if (index == dev->num_statics) - goto exit; + if (index == dev->num_statics && !empty) + return; /* add entry */ - static_table[0] = ALU_V_STATIC_VALID; - static_table[1] |= BIT(port); - if (mdb->vid) - static_table[1] |= ALU_V_USE_FID; - static_table[2] = (mdb->vid << ALU_V_FID_S); - static_table[2] |= mac_hi; - static_table[3] = mac_lo; - - write_table(ds, static_table); - - data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; - ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - - /* wait to be finished */ - if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) - dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + if (index == dev->num_statics) { + index = empty - 1; + memset(&alu, 0, sizeof(alu)); + memcpy(alu.mac, mdb->addr, ETH_ALEN); + alu.is_static = true; + } + alu.port_forward |= BIT(port); + if (mdb->vid) { + alu.is_use_fid = true; -exit: - mutex_unlock(&dev->alu_mutex); + /* Need a way to map VID to FID. */ + alu.fid = mdb->vid; + } + dev->dev_ops->w_sta_mac_table(dev, index, &alu); } +EXPORT_SYMBOL_GPL(ksz_port_mdb_add); -static int ksz_port_mdb_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) +int ksz_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) { struct ksz_device *dev = ds->priv; - u32 static_table[4]; - u32 data; + struct alu_struct alu; int index; int ret = 0; - u32 mac_hi, mac_lo; - - mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); - mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); - mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); - - mutex_lock(&dev->alu_mutex); for (index = 0; index < dev->num_statics; index++) { - /* find empty slot first */ - data = (index << ALU_STAT_INDEX_S) | - ALU_STAT_READ | ALU_STAT_START; - ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - - /* wait to be finished */ - ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000); - if (ret < 0) { - dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); - goto exit; - } - - /* read ALU static table */ - read_table(ds, static_table); - - if (static_table[0] & ALU_V_STATIC_VALID) { - /* check this has same vid & mac address */ - - if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) && - ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && - (static_table[3] == mac_lo)) { - /* found matching one */ + if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { + /* Found one already in static MAC table. */ + if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && + alu.fid == mdb->vid) break; - } } } /* no available entry */ - if (index == dev->num_statics) { - ret = -EINVAL; + if (index == dev->num_statics) goto exit; - } /* clear port */ - static_table[1] &= ~BIT(port); - - if ((static_table[1] & ALU_V_PORT_MAP) == 0) { - /* delete entry */ - static_table[0] = 0; - static_table[1] = 0; - static_table[2] = 0; - static_table[3] = 0; - } - - write_table(ds, static_table); - - data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; - ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - - /* wait to be finished */ - ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000); - if (ret < 0) - dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + alu.port_forward &= ~BIT(port); + if (!alu.port_forward) + alu.is_static = false; + dev->dev_ops->w_sta_mac_table(dev, index, &alu); exit: - mutex_unlock(&dev->alu_mutex); - return ret; } +EXPORT_SYMBOL_GPL(ksz_port_mdb_del); -static int ksz_port_mirror_add(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror, - bool ingress) +int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct ksz_device *dev = ds->priv; - if (ingress) - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); - else - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); - - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); - - /* configure mirror port */ - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, - PORT_MIRROR_SNIFFER, true); + /* setup slave port */ + dev->dev_ops->port_setup(dev, port, false); - ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + /* port_stp_state_set() will be called after to enable the port so + * there is no need to do anything. + */ return 0; } +EXPORT_SYMBOL_GPL(ksz_enable_port); -static void ksz_port_mirror_del(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror) +void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct ksz_device *dev = ds->priv; - u8 data; - - if (mirror->ingress) - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); - else - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + dev->on_ports &= ~(1 << port); + dev->live_ports &= ~(1 << port); - if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, - PORT_MIRROR_SNIFFER, false); -} - -static const struct dsa_switch_ops ksz_switch_ops = { - .get_tag_protocol = ksz_get_tag_protocol, - .setup = ksz_setup, - .phy_read = ksz_phy_read16, - .phy_write = ksz_phy_write16, - .port_enable = ksz_enable_port, - .port_disable = ksz_disable_port, - .get_strings = ksz_get_strings, - .get_ethtool_stats = ksz_get_ethtool_stats, - .get_sset_count = ksz_sset_count, - .port_stp_state_set = ksz_port_stp_state_set, - .port_fast_age = ksz_port_fast_age, - .port_vlan_filtering = ksz_port_vlan_filtering, - .port_vlan_prepare = ksz_port_vlan_prepare, - .port_vlan_add = ksz_port_vlan_add, - .port_vlan_del = ksz_port_vlan_del, - .port_fdb_dump = ksz_port_fdb_dump, - .port_fdb_add = ksz_port_fdb_add, - .port_fdb_del = ksz_port_fdb_del, - .port_mdb_prepare = ksz_port_mdb_prepare, - .port_mdb_add = ksz_port_mdb_add, - .port_mdb_del = ksz_port_mdb_del, - .port_mirror_add = ksz_port_mirror_add, - .port_mirror_del = ksz_port_mirror_del, -}; - -struct ksz_chip_data { - u32 chip_id; - const char *dev_name; - int num_vlans; - int num_alus; - int num_statics; - int cpu_ports; - int port_cnt; -}; - -static const struct ksz_chip_data ksz_switch_chips[] = { - { - .chip_id = 0x00947700, - .dev_name = "KSZ9477", - .num_vlans = 4096, - .num_alus = 4096, - .num_statics = 16, - .cpu_ports = 0x7F, /* can be configured as cpu port */ - .port_cnt = 7, /* total physical port count */ - }, - { - .chip_id = 0x00989700, - .dev_name = "KSZ9897", - .num_vlans = 4096, - .num_alus = 4096, - .num_statics = 16, - .cpu_ports = 0x7F, /* can be configured as cpu port */ - .port_cnt = 7, /* total physical port count */ - }, -}; - -static int ksz_switch_init(struct ksz_device *dev) -{ - int i; - - dev->ds->ops = &ksz_switch_ops; - - for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) { - const struct ksz_chip_data *chip = &ksz_switch_chips[i]; - - if (dev->chip_id == chip->chip_id) { - dev->name = chip->dev_name; - dev->num_vlans = chip->num_vlans; - dev->num_alus = chip->num_alus; - dev->num_statics = chip->num_statics; - dev->port_cnt = chip->port_cnt; - dev->cpu_ports = chip->cpu_ports; - - break; - } - } - - /* no switch found */ - if (!dev->port_cnt) - return -ENODEV; - - return 0; + /* port_stp_state_set() will be called after to disable the port so + * there is no need to do anything. + */ } +EXPORT_SYMBOL_GPL(ksz_disable_port); struct ksz_device *ksz_switch_alloc(struct device *base, const struct ksz_io_ops *ops, @@ -1167,59 +288,64 @@ struct ksz_device *ksz_switch_alloc(struct device *base, } EXPORT_SYMBOL(ksz_switch_alloc); -int ksz_switch_detect(struct ksz_device *dev) -{ - u8 data8; - u32 id32; - int ret; - - /* turn off SPI DO Edge select */ - ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); - if (ret) - return ret; - - data8 &= ~SPI_AUTO_EDGE_DETECTION; - ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); - if (ret) - return ret; - - /* read chip id */ - ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32); - if (ret) - return ret; - - dev->chip_id = id32; - - return 0; -} -EXPORT_SYMBOL(ksz_switch_detect); - -int ksz_switch_register(struct ksz_device *dev) +int ksz_switch_register(struct ksz_device *dev, + const struct ksz_dev_ops *ops) { int ret; if (dev->pdata) dev->chip_id = dev->pdata->chip_id; + dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(dev->reset_gpio)) + return PTR_ERR(dev->reset_gpio); + + if (dev->reset_gpio) { + gpiod_set_value(dev->reset_gpio, 1); + mdelay(10); + gpiod_set_value(dev->reset_gpio, 0); + } + mutex_init(&dev->reg_mutex); mutex_init(&dev->stats_mutex); mutex_init(&dev->alu_mutex); mutex_init(&dev->vlan_mutex); - if (ksz_switch_detect(dev)) + dev->dev_ops = ops; + + if (dev->dev_ops->detect(dev)) return -EINVAL; - ret = ksz_switch_init(dev); + ret = dev->dev_ops->init(dev); if (ret) return ret; - return dsa_register_switch(dev->ds); + dev->interface = PHY_INTERFACE_MODE_MII; + if (dev->dev->of_node) { + ret = of_get_phy_mode(dev->dev->of_node); + if (ret >= 0) + dev->interface = ret; + } + + ret = dsa_register_switch(dev->ds); + if (ret) { + dev->dev_ops->exit(dev); + return ret; + } + + return 0; } EXPORT_SYMBOL(ksz_switch_register); void ksz_switch_remove(struct ksz_device *dev) { + dev->dev_ops->exit(dev); dsa_unregister_switch(dev->ds); + + if (dev->reset_gpio) + gpiod_set_value(dev->reset_gpio, 1); + } EXPORT_SYMBOL(ksz_switch_remove); |