diff options
Diffstat (limited to 'drivers/net/dsa/bcm_sf2.c')
| -rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 338 |
1 files changed, 327 insertions, 11 deletions
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 9d56515f4c4d..6f946fedbb77 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -21,10 +21,13 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_address.h> +#include <linux/of_net.h> #include <net/dsa.h> #include <linux/ethtool.h> #include <linux/if_bridge.h> #include <linux/brcmphy.h> +#include <linux/etherdevice.h> +#include <net/switchdev.h> #include "bcm_sf2.h" #include "bcm_sf2_regs.h" @@ -264,6 +267,50 @@ static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable) } } +static inline void bcm_sf2_port_intr_enable(struct bcm_sf2_priv *priv, + int port) +{ + unsigned int off; + + switch (port) { + case 7: + off = P7_IRQ_OFF; + break; + case 0: + /* Port 0 interrupts are located on the first bank */ + intrl2_0_mask_clear(priv, P_IRQ_MASK(P0_IRQ_OFF)); + return; + default: + off = P_IRQ_OFF(port); + break; + } + + intrl2_1_mask_clear(priv, P_IRQ_MASK(off)); +} + +static inline void bcm_sf2_port_intr_disable(struct bcm_sf2_priv *priv, + int port) +{ + unsigned int off; + + switch (port) { + case 7: + off = P7_IRQ_OFF; + break; + case 0: + /* Port 0 interrupts are located on the first bank */ + intrl2_0_mask_set(priv, P_IRQ_MASK(P0_IRQ_OFF)); + intrl2_0_writel(priv, P_IRQ_MASK(P0_IRQ_OFF), INTRL2_CPU_CLEAR); + return; + default: + off = P_IRQ_OFF(port); + break; + } + + intrl2_1_mask_set(priv, P_IRQ_MASK(off)); + intrl2_1_writel(priv, P_IRQ_MASK(off), INTRL2_CPU_CLEAR); +} + static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, struct phy_device *phy) { @@ -280,7 +327,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, core_writel(priv, 0, CORE_G_PCTL_PORT(port)); /* Re-enable the GPHY and re-apply workarounds */ - if (port == 0 && priv->hw_params.num_gphy == 1) { + if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) { bcm_sf2_gphy_enable_set(ds, true); if (phy) { /* if phy_stop() has been called before, phy @@ -297,9 +344,9 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port, } } - /* Enable port 7 interrupts to get notified */ - if (port == 7) - intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF)); + /* Enable MoCA port interrupts to get notified */ + if (port == priv->moca_port) + bcm_sf2_port_intr_enable(priv, port); /* Set this port, and only this one to be in the default VLAN, * if member of a bridge, restore its membership prior to @@ -329,12 +376,10 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port, if (priv->wol_ports_mask & (1 << port)) return; - if (port == 7) { - intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF)); - intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR); - } + if (port == priv->moca_port) + bcm_sf2_port_intr_disable(priv, port); - if (port == 0 && priv->hw_params.num_gphy == 1) + if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) bcm_sf2_gphy_enable_set(ds, false); if (dsa_is_cpu_port(ds, port)) @@ -555,6 +600,236 @@ static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port, return 0; } +/* Address Resolution Logic routines */ +static int bcm_sf2_arl_op_wait(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 10; + u32 reg; + + do { + reg = core_readl(priv, CORE_ARLA_RWCTL); + if (!(reg & ARL_STRTDN)) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + return -ETIMEDOUT; +} + +static int bcm_sf2_arl_rw_op(struct bcm_sf2_priv *priv, unsigned int op) +{ + u32 cmd; + + if (op > ARL_RW) + return -EINVAL; + + cmd = core_readl(priv, CORE_ARLA_RWCTL); + cmd &= ~IVL_SVL_SELECT; + cmd |= ARL_STRTDN; + if (op) + cmd |= ARL_RW; + else + cmd &= ~ARL_RW; + core_writel(priv, cmd, CORE_ARLA_RWCTL); + + return bcm_sf2_arl_op_wait(priv); +} + +static int bcm_sf2_arl_read(struct bcm_sf2_priv *priv, u64 mac, + u16 vid, struct bcm_sf2_arl_entry *ent, u8 *idx, + bool is_valid) +{ + unsigned int i; + int ret; + + ret = bcm_sf2_arl_op_wait(priv); + if (ret) + return ret; + + /* Read the 4 bins */ + for (i = 0; i < 4; i++) { + u64 mac_vid; + u32 fwd_entry; + + mac_vid = core_readq(priv, CORE_ARLA_MACVID_ENTRY(i)); + fwd_entry = core_readl(priv, CORE_ARLA_FWD_ENTRY(i)); + bcm_sf2_arl_to_entry(ent, mac_vid, fwd_entry); + + if (ent->is_valid && is_valid) { + *idx = i; + return 0; + } + + /* This is the MAC we just deleted */ + if (!is_valid && (mac_vid & mac)) + return 0; + } + + return -ENOENT; +} + +static int bcm_sf2_arl_op(struct bcm_sf2_priv *priv, int op, int port, + const unsigned char *addr, u16 vid, bool is_valid) +{ + struct bcm_sf2_arl_entry ent; + u32 fwd_entry; + u64 mac, mac_vid = 0; + u8 idx = 0; + int ret; + + /* Convert the array into a 64-bit MAC */ + mac = bcm_sf2_mac_to_u64(addr); + + /* Perform a read for the given MAC and VID */ + core_writeq(priv, mac, CORE_ARLA_MAC); + core_writel(priv, vid, CORE_ARLA_VID); + + /* Issue a read operation for this MAC */ + ret = bcm_sf2_arl_rw_op(priv, 1); + if (ret) + return ret; + + ret = bcm_sf2_arl_read(priv, mac, vid, &ent, &idx, is_valid); + /* If this is a read, just finish now */ + if (op) + return ret; + + /* We could not find a matching MAC, so reset to a new entry */ + if (ret) { + fwd_entry = 0; + idx = 0; + } + + memset(&ent, 0, sizeof(ent)); + ent.port = port; + ent.is_valid = is_valid; + ent.vid = vid; + ent.is_static = true; + memcpy(ent.mac, addr, ETH_ALEN); + bcm_sf2_arl_from_entry(&mac_vid, &fwd_entry, &ent); + + core_writeq(priv, mac_vid, CORE_ARLA_MACVID_ENTRY(idx)); + core_writel(priv, fwd_entry, CORE_ARLA_FWD_ENTRY(idx)); + + ret = bcm_sf2_arl_rw_op(priv, 0); + if (ret) + return ret; + + /* Re-read the entry to check */ + return bcm_sf2_arl_read(priv, mac, vid, &ent, &idx, is_valid); +} + +static int bcm_sf2_sw_fdb_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_fdb *fdb, + struct switchdev_trans *trans) +{ + /* We do not need to do anything specific here yet */ + return 0; +} + +static int bcm_sf2_sw_fdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_fdb *fdb, + struct switchdev_trans *trans) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + + return bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, true); +} + +static int bcm_sf2_sw_fdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_fdb *fdb) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + + return bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, false); +} + +static int bcm_sf2_arl_search_wait(struct bcm_sf2_priv *priv) +{ + unsigned timeout = 1000; + u32 reg; + + do { + reg = core_readl(priv, CORE_ARLA_SRCH_CTL); + if (!(reg & ARLA_SRCH_STDN)) + return 0; + + if (reg & ARLA_SRCH_VLID) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + return -ETIMEDOUT; +} + +static void bcm_sf2_arl_search_rd(struct bcm_sf2_priv *priv, u8 idx, + struct bcm_sf2_arl_entry *ent) +{ + u64 mac_vid; + u32 fwd_entry; + + mac_vid = core_readq(priv, CORE_ARLA_SRCH_RSLT_MACVID(idx)); + fwd_entry = core_readl(priv, CORE_ARLA_SRCH_RSLT(idx)); + bcm_sf2_arl_to_entry(ent, mac_vid, fwd_entry); +} + +static int bcm_sf2_sw_fdb_copy(struct net_device *dev, int port, + const struct bcm_sf2_arl_entry *ent, + struct switchdev_obj_port_fdb *fdb, + int (*cb)(struct switchdev_obj *obj)) +{ + if (!ent->is_valid) + return 0; + + if (port != ent->port) + return 0; + + ether_addr_copy(fdb->addr, ent->mac); + fdb->vid = ent->vid; + fdb->ndm_state = ent->is_static ? NUD_NOARP : NUD_REACHABLE; + + return cb(&fdb->obj); +} + +static int bcm_sf2_sw_fdb_dump(struct dsa_switch *ds, int port, + struct switchdev_obj_port_fdb *fdb, + int (*cb)(struct switchdev_obj *obj)) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + struct net_device *dev = ds->ports[port]; + struct bcm_sf2_arl_entry results[2]; + unsigned int count = 0; + int ret; + + /* Start search operation */ + core_writel(priv, ARLA_SRCH_STDN, CORE_ARLA_SRCH_CTL); + + do { + ret = bcm_sf2_arl_search_wait(priv); + if (ret) + return ret; + + /* Read both entries, then return their values back */ + bcm_sf2_arl_search_rd(priv, 0, &results[0]); + ret = bcm_sf2_sw_fdb_copy(dev, port, &results[0], fdb, cb); + if (ret) + return ret; + + bcm_sf2_arl_search_rd(priv, 1, &results[1]); + ret = bcm_sf2_sw_fdb_copy(dev, port, &results[1], fdb, cb); + if (ret) + return ret; + + if (!results[0].is_valid && !results[1].is_valid) + break; + + } while (count++ < CORE_ARLA_NUM_ENTRIES); + + return 0; +} + static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id) { struct bcm_sf2_priv *priv = dev_id; @@ -615,6 +890,42 @@ static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv) intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); } +static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv, + struct device_node *dn) +{ + struct device_node *port; + const char *phy_mode_str; + int mode; + unsigned int port_num; + int ret; + + priv->moca_port = -1; + + for_each_available_child_of_node(dn, port) { + if (of_property_read_u32(port, "reg", &port_num)) + continue; + + /* Internal PHYs get assigned a specific 'phy-mode' property + * value: "internal" to help flag them before MDIO probing + * has completed, since they might be turned off at that + * time + */ + mode = of_get_phy_mode(port); + if (mode < 0) { + ret = of_property_read_string(port, "phy-mode", + &phy_mode_str); + if (ret < 0) + continue; + + if (!strcasecmp(phy_mode_str, "internal")) + priv->int_phy_mask |= 1 << port_num; + } + + if (mode == PHY_INTERFACE_MODE_MOCA) + priv->moca_port = port_num; + } +} + static int bcm_sf2_sw_setup(struct dsa_switch *ds) { const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; @@ -633,6 +944,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) * level */ dn = ds->pd->of_node->parent; + bcm_sf2_identify_ports(priv, ds->pd->of_node); priv->irq0 = irq_of_parse_and_map(dn, 0); priv->irq1 = irq_of_parse_and_map(dn, 1); @@ -913,7 +1225,7 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, status->link = 0; - /* Port 7 is special as we do not get link status from CORE_LNKSTS, + /* MoCA port is special as we do not get link status from CORE_LNKSTS, * which means that we need to force the link at the port override * level to get the data to flow. We do use what the interrupt handler * did determine before. @@ -921,7 +1233,7 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, * For the other ports, we just force the link status, since this is * a fixed PHY device. */ - if (port == 7) { + if (port == priv->moca_port) { status->link = priv->port_sts[port].link; /* For MoCA interfaces, also force a link down notification * since some version of the user-space daemon (mocad) use @@ -1076,6 +1388,10 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = { .port_join_bridge = bcm_sf2_sw_br_join, .port_leave_bridge = bcm_sf2_sw_br_leave, .port_stp_update = bcm_sf2_sw_br_set_stp_state, + .port_fdb_prepare = bcm_sf2_sw_fdb_prepare, + .port_fdb_add = bcm_sf2_sw_fdb_add, + .port_fdb_del = bcm_sf2_sw_fdb_del, + .port_fdb_dump = bcm_sf2_sw_fdb_dump, }; static int __init bcm_sf2_init(void) |