diff options
Diffstat (limited to 'drivers/net/dsa/b53/b53_mdio.c')
| -rw-r--r-- | drivers/net/dsa/b53/b53_mdio.c | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c new file mode 100644 index 000000000000..aa87c3fffdac --- /dev/null +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -0,0 +1,392 @@ +/* + * B53 register access through MII registers + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/brcmphy.h> +#include <linux/rtnetlink.h> +#include <net/dsa.h> + +#include "b53_priv.h" + +/* MII registers */ +#define REG_MII_PAGE 0x10 /* MII Page register */ +#define REG_MII_ADDR 0x11 /* MII Address register */ +#define REG_MII_DATA0 0x18 /* MII Data register 0 */ +#define REG_MII_DATA1 0x19 /* MII Data register 1 */ +#define REG_MII_DATA2 0x1a /* MII Data register 2 */ +#define REG_MII_DATA3 0x1b /* MII Data register 3 */ + +#define REG_MII_PAGE_ENABLE BIT(0) +#define REG_MII_ADDR_WRITE BIT(0) +#define REG_MII_ADDR_READ BIT(1) + +static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op) +{ + int i; + u16 v; + int ret; + struct mii_bus *bus = dev->priv; + + if (dev->current_page != page) { + /* set page number */ + v = (page << 8) | REG_MII_PAGE_ENABLE; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_PAGE, v); + if (ret) + return ret; + dev->current_page = page; + } + + /* set register address */ + v = (reg << 8) | op; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v); + if (ret) + return ret; + + /* check if operation completed */ + for (i = 0; i < 5; ++i) { + v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_ADDR); + if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ))) + break; + usleep_range(10, 100); + } + + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0) & 0xff; + + return 0; +} + +static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + + return 0; +} + +static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + *val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA1) << 16; + + return 0; +} + +static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 2; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 3; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u32 temp = value; + + for (i = 0; i < 2; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 3; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 4; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg, + u16 *value) +{ + struct mii_bus *bus = dev->priv; + + *value = mdiobus_read_nested(bus, addr, reg); + + return 0; +} + +static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg, + u16 value) +{ + struct mii_bus *bus = dev->bus; + + return mdiobus_write_nested(bus, addr, reg, value); +} + +static struct b53_io_ops b53_mdio_ops = { + .read8 = b53_mdio_read8, + .read16 = b53_mdio_read16, + .read32 = b53_mdio_read32, + .read48 = b53_mdio_read48, + .read64 = b53_mdio_read64, + .write8 = b53_mdio_write8, + .write16 = b53_mdio_write16, + .write32 = b53_mdio_write32, + .write48 = b53_mdio_write48, + .write64 = b53_mdio_write64, + .phy_read16 = b53_mdio_phy_read16, + .phy_write16 = b53_mdio_phy_write16, +}; + +#define B53_BRCM_OUI_1 0x0143bc00 +#define B53_BRCM_OUI_2 0x03625c00 +#define B53_BRCM_OUI_3 0x00406000 + +static int b53_mdio_probe(struct mdio_device *mdiodev) +{ + struct b53_device *dev; + u32 phy_id; + int ret; + + /* allow the generic PHY driver to take over the non-management MDIO + * addresses + */ + if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) { + dev_err(&mdiodev->dev, "leaving address %d to PHY\n", + mdiodev->addr); + return -ENODEV; + } + + /* read the first port's id */ + phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16; + phy_id |= mdiobus_read(mdiodev->bus, 0, 3); + + /* BCM5325, BCM539x (OUI_1) + * BCM53125, BCM53128 (OUI_2) + * BCM5365 (OUI_3) + */ + if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_3) { + dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id); + return -ENODEV; + } + + /* First probe will come from SWITCH_MDIO controller on the 7445D0 + * switch, which will conflict with the 7445 integrated switch + * pseudo-phy (we end-up programming both). In that case, we return + * -EPROBE_DEFER for the first time we get here, and wait until we come + * back with the slave MDIO bus which has the correct indirection + * layer setup + */ + if (of_machine_is_compatible("brcm,bcm7445d0") && + strcmp(mdiodev->bus->name, "sf2 slave mii")) + return -EPROBE_DEFER; + + dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); + if (!dev) + return -ENOMEM; + + /* we don't use page 0xff, so force a page set */ + dev->current_page = 0xff; + dev->bus = mdiodev->bus; + + dev_set_drvdata(&mdiodev->dev, dev); + + ret = b53_switch_register(dev); + if (ret) { + dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret); + return ret; + } + + return ret; +} + +static void b53_mdio_remove(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + struct dsa_switch *ds = dev->ds; + + dsa_unregister_switch(ds); +} + +static const struct of_device_id b53_of_match[] = { + { .compatible = "brcm,bcm5325" }, + { .compatible = "brcm,bcm53115" }, + { .compatible = "brcm,bcm53125" }, + { .compatible = "brcm,bcm53128" }, + { .compatible = "brcm,bcm5365" }, + { .compatible = "brcm,bcm5395" }, + { .compatible = "brcm,bcm5397" }, + { .compatible = "brcm,bcm5398" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, b53_of_match); + +static struct mdio_driver b53_mdio_driver = { + .probe = b53_mdio_probe, + .remove = b53_mdio_remove, + .mdiodrv.driver = { + .name = "bcm53xx", + .of_match_table = b53_of_match, + }, +}; + +static int __init b53_mdio_driver_register(void) +{ + return mdio_driver_register(&b53_mdio_driver); +} +module_init(b53_mdio_driver_register); + +static void __exit b53_mdio_driver_unregister(void) +{ + mdio_driver_unregister(&b53_mdio_driver); +} +module_exit(b53_mdio_driver_unregister); + +MODULE_DESCRIPTION("B53 MDIO access driver"); +MODULE_LICENSE("Dual BSD/GPL"); |