diff options
Diffstat (limited to 'drivers/net/can/xilinx_can.c')
-rw-r--r-- | drivers/net/can/xilinx_can.c | 292 |
1 files changed, 242 insertions, 50 deletions
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 63203ff452b5..911b34316c9d 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -50,6 +50,10 @@ enum xcan_reg { XCAN_AFR_OFFSET = 0x60, /* Acceptance Filter */ /* only on CAN FD cores */ + XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate + * Prescalar + */ + XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */ XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */ XCAN_AFR_EXT_OFFSET = 0x00E0, /* Acceptance Filter */ XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */ @@ -62,6 +66,7 @@ enum xcan_reg { #define XCAN_FRAME_DLC_OFFSET(frame_base) ((frame_base) + 0x04) #define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08) #define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C) +#define XCANFD_FRAME_DW_OFFSET(frame_base) ((frame_base) + 0x08) #define XCAN_CANFD_FRAME_SIZE 0x48 #define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \ @@ -118,8 +123,12 @@ enum xcan_reg { #define XCAN_IDR_RTR_MASK 0x00000001 /* Remote TX request */ #define XCAN_DLCR_DLC_MASK 0xF0000000 /* Data length code */ #define XCAN_FSR_FL_MASK 0x00003F00 /* RX Fill Level */ +#define XCAN_2_FSR_FL_MASK 0x00007F00 /* RX Fill Level */ #define XCAN_FSR_IRI_MASK 0x00000080 /* RX Increment Read Index */ #define XCAN_FSR_RI_MASK 0x0000001F /* RX Read Index */ +#define XCAN_2_FSR_RI_MASK 0x0000003F /* RX Read Index */ +#define XCAN_DLCR_EDL_MASK 0x08000000 /* EDL Mask in DLC */ +#define XCAN_DLCR_BRS_MASK 0x04000000 /* BRS Mask in DLC */ /* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ @@ -133,6 +142,7 @@ enum xcan_reg { /* CAN frame length constants */ #define XCAN_FRAME_MAX_DATA_LEN 8 +#define XCANFD_DW_BYTES 4 #define XCAN_TIMEOUT (1 * HZ) /* TX-FIFO-empty interrupt available */ @@ -149,7 +159,15 @@ enum xcan_reg { #define XCAN_FLAG_RX_FIFO_MULTI 0x0010 #define XCAN_FLAG_CANFD_2 0x0020 +enum xcan_ip_type { + XAXI_CAN = 0, + XZYNQ_CANPS, + XAXI_CANFD, + XAXI_CANFD_2_0, +}; + struct xcan_devtype_data { + enum xcan_ip_type cantype; unsigned int flags; const struct can_bittiming_const *bittiming_const; const char *bus_clk_name; @@ -183,7 +201,7 @@ struct xcan_priv { struct napi_struct napi; u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg); void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg, - u32 val); + u32 val); struct device *dev; void __iomem *reg_base; unsigned long irq_flags; @@ -205,6 +223,7 @@ static const struct can_bittiming_const xcan_bittiming_const = { .brp_inc = 1, }; +/* AXI CANFD Arbitration Bittiming constants as per AXI CANFD 1.0 spec */ static const struct can_bittiming_const xcan_bittiming_const_canfd = { .name = DRIVER_NAME, .tseg1_min = 1, @@ -217,6 +236,20 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd = { .brp_inc = 1, }; +/* AXI CANFD Data Bittiming constants as per AXI CANFD 1.0 specs */ +static struct can_bittiming_const xcan_data_bittiming_const_canfd = { + .name = DRIVER_NAME, + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 8, + .brp_min = 1, + .brp_max = 256, + .brp_inc = 1, +}; + +/* AXI CANFD 2.0 Arbitration Bittiming constants as per AXI CANFD 2.0 spec */ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = { .name = DRIVER_NAME, .tseg1_min = 1, @@ -229,6 +262,19 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = { .brp_inc = 1, }; +/* AXI CANFD 2.0 Data Bittiming constants as per AXI CANFD 2.0 spec */ +static struct can_bittiming_const xcan_data_bittiming_const_canfd2 = { + .name = DRIVER_NAME, + .tseg1_min = 1, + .tseg1_max = 32, + .tseg2_min = 1, + .tseg2_max = 16, + .sjw_max = 16, + .brp_min = 1, + .brp_max = 256, + .brp_inc = 1, +}; + /** * xcan_write_reg_le - Write a value to the device register little endian * @priv: Driver private data structure @@ -238,7 +284,7 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = { * Write data to the paricular CAN register */ static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg, - u32 val) + u32 val) { iowrite32(val, priv->reg_base + reg); } @@ -265,7 +311,7 @@ static u32 xcan_read_reg_le(const struct xcan_priv *priv, enum xcan_reg reg) * Write data to the paricular CAN register */ static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg, - u32 val) + u32 val) { iowrite32be(val, priv->reg_base + reg); } @@ -343,6 +389,7 @@ static int xcan_set_bittiming(struct net_device *ndev) { struct xcan_priv *priv = netdev_priv(ndev); struct can_bittiming *bt = &priv->can.bittiming; + struct can_bittiming *dbt = &priv->can.data_bittiming; u32 btr0, btr1; u32 is_config_mode; @@ -372,9 +419,27 @@ static int xcan_set_bittiming(struct net_device *ndev) priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0); priv->write_reg(priv, XCAN_BTR_OFFSET, btr1); + if (priv->devtype.cantype == XAXI_CANFD || + priv->devtype.cantype == XAXI_CANFD_2_0) { + /* Setting Baud Rate prescalar value in F_BRPR Register */ + btr0 = dbt->brp - 1; + + /* Setting Time Segment 1 in BTR Register */ + btr1 = dbt->prop_seg + dbt->phase_seg1 - 1; + + /* Setting Time Segment 2 in BTR Register */ + btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift; + + /* Setting Synchronous jump width in BTR Register */ + btr1 |= (dbt->sjw - 1) << priv->devtype.btr_sjw_shift; + + priv->write_reg(priv, XCAN_F_BRPR_OFFSET, btr0); + priv->write_reg(priv, XCAN_F_BTR_OFFSET, btr1); + } + netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n", - priv->read_reg(priv, XCAN_BRPR_OFFSET), - priv->read_reg(priv, XCAN_BTR_OFFSET)); + priv->read_reg(priv, XCAN_BRPR_OFFSET), + priv->read_reg(priv, XCAN_BTR_OFFSET)); return 0; } @@ -392,9 +457,8 @@ static int xcan_set_bittiming(struct net_device *ndev) static int xcan_chip_start(struct net_device *ndev) { struct xcan_priv *priv = netdev_priv(ndev); - u32 reg_msr, reg_sr_mask; + u32 reg_msr; int err; - unsigned long timeout; u32 ier; /* Check if it is in reset mode */ @@ -420,10 +484,8 @@ static int xcan_chip_start(struct net_device *ndev) /* Check whether it is loopback mode or normal mode */ if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { reg_msr = XCAN_MSR_LBACK_MASK; - reg_sr_mask = XCAN_SR_LBACK_MASK; } else { reg_msr = 0x0; - reg_sr_mask = XCAN_SR_NORMAL_MASK; } /* enable the first extended filter, if any, as cores with extended @@ -435,16 +497,8 @@ static int xcan_chip_start(struct net_device *ndev) priv->write_reg(priv, XCAN_MSR_OFFSET, reg_msr); priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK); - timeout = jiffies + XCAN_TIMEOUT; - while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & reg_sr_mask)) { - if (time_after(jiffies, timeout)) { - netdev_warn(ndev, - "timed out for correct mode\n"); - return -ETIMEDOUT; - } - } netdev_dbg(ndev, "status:#x%08x\n", - priv->read_reg(priv, XCAN_SR_OFFSET)); + priv->read_reg(priv, XCAN_SR_OFFSET)); priv->can.state = CAN_STATE_ERROR_ACTIVE; return 0; @@ -483,6 +537,7 @@ static int xcan_do_set_mode(struct net_device *ndev, enum can_mode mode) /** * xcan_write_frame - Write a frame to HW + * @priv: Driver private data structure * @skb: sk_buff pointer that contains data to be Txed * @frame_offset: Register offset to write the frame to */ @@ -490,7 +545,8 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb, int frame_offset) { u32 id, dlc, data[2] = {0, 0}; - struct can_frame *cf = (struct can_frame *)skb->data; + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + u32 ramoff, dwindex = 0, i; /* Watch carefully on the bit sequence */ if (cf->can_id & CAN_EFF_FLAG) { @@ -498,7 +554,7 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb, id = ((cf->can_id & CAN_EFF_MASK) << XCAN_IDR_ID2_SHIFT) & XCAN_IDR_ID2_MASK; id |= (((cf->can_id & CAN_EFF_MASK) >> - (CAN_EFF_ID_BITS-CAN_SFF_ID_BITS)) << + (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS)) << XCAN_IDR_ID1_SHIFT) & XCAN_IDR_ID1_MASK; /* The substibute remote TX request bit should be "1" @@ -519,31 +575,51 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb, id |= XCAN_IDR_SRR_MASK; } - dlc = cf->can_dlc << XCAN_DLCR_DLC_SHIFT; - - if (cf->can_dlc > 0) - data[0] = be32_to_cpup((__be32 *)(cf->data + 0)); - if (cf->can_dlc > 4) - data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); + dlc = can_len2dlc(cf->len) << XCAN_DLCR_DLC_SHIFT; + if (can_is_canfd_skb(skb)) { + if (cf->flags & CANFD_BRS) + dlc |= XCAN_DLCR_BRS_MASK; + dlc |= XCAN_DLCR_EDL_MASK; + } priv->write_reg(priv, XCAN_FRAME_ID_OFFSET(frame_offset), id); /* If the CAN frame is RTR frame this write triggers transmission * (not on CAN FD) */ priv->write_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_offset), dlc); - if (!(cf->can_id & CAN_RTR_FLAG)) { - priv->write_reg(priv, XCAN_FRAME_DW1_OFFSET(frame_offset), - data[0]); - /* If the CAN frame is Standard/Extended frame this - * write triggers transmission (not on CAN FD) - */ - priv->write_reg(priv, XCAN_FRAME_DW2_OFFSET(frame_offset), - data[1]); + if (priv->devtype.cantype == XAXI_CANFD || + priv->devtype.cantype == XAXI_CANFD_2_0) { + for (i = 0; i < cf->len; i += 4) { + ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset) + + (dwindex * XCANFD_DW_BYTES); + priv->write_reg(priv, ramoff, + be32_to_cpup((__be32 *)(cf->data + i))); + dwindex++; + } + } else { + if (cf->len > 0) + data[0] = be32_to_cpup((__be32 *)(cf->data + 0)); + if (cf->len > 4) + data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); + + if (!(cf->can_id & CAN_RTR_FLAG)) { + priv->write_reg(priv, + XCAN_FRAME_DW1_OFFSET(frame_offset), + data[0]); + /* If the CAN frame is Standard/Extended frame this + * write triggers transmission (not on CAN FD) + */ + priv->write_reg(priv, + XCAN_FRAME_DW2_OFFSET(frame_offset), + data[1]); + } } } /** * xcan_start_xmit_fifo - Starts the transmission (FIFO mode) + * @skb: sk_buff pointer that contains data to be Txed + * @ndev: Pointer to net_device structure * * Return: 0 on success, -ENOSPC if FIFO is full. */ @@ -580,6 +656,8 @@ static int xcan_start_xmit_fifo(struct sk_buff *skb, struct net_device *ndev) /** * xcan_start_xmit_mailbox - Starts the transmission (mailbox mode) + * @skb: sk_buff pointer that contains data to be Txed + * @ndev: Pointer to net_device structure * * Return: 0 on success, -ENOSPC if there is no space */ @@ -712,6 +790,88 @@ static int xcan_rx(struct net_device *ndev, int frame_base) } /** + * xcanfd_rx - Is called from CAN isr to complete the received + * frame processing + * @ndev: Pointer to net_device structure + * @frame_base: Register offset to the frame to be read + * + * This function is invoked from the CAN isr(poll) to process the Rx frames. It + * does minimal processing and invokes "netif_receive_skb" to complete further + * processing. + * Return: 1 on success and 0 on failure. + */ +static int xcanfd_rx(struct net_device *ndev, int frame_base) +{ + struct xcan_priv *priv = netdev_priv(ndev); + struct net_device_stats *stats = &ndev->stats; + struct canfd_frame *cf; + struct sk_buff *skb; + u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, dw_offset; + + id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base)); + dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base)); + if (dlc & XCAN_DLCR_EDL_MASK) + skb = alloc_canfd_skb(ndev, &cf); + else + skb = alloc_can_skb(ndev, (struct can_frame **)&cf); + + if (unlikely(!skb)) { + stats->rx_dropped++; + return 0; + } + + /* Change Xilinx CANFD data length format to socketCAN data + * format + */ + if (dlc & XCAN_DLCR_EDL_MASK) + cf->len = can_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >> + XCAN_DLCR_DLC_SHIFT); + else + cf->len = get_can_dlc((dlc & XCAN_DLCR_DLC_MASK) >> + XCAN_DLCR_DLC_SHIFT); + + /* Change Xilinx CAN ID format to socketCAN ID format */ + if (id_xcan & XCAN_IDR_IDE_MASK) { + /* The received frame is an Extended format frame */ + cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3; + cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >> + XCAN_IDR_ID2_SHIFT; + cf->can_id |= CAN_EFF_FLAG; + if (id_xcan & XCAN_IDR_RTR_MASK) + cf->can_id |= CAN_RTR_FLAG; + } else { + /* The received frame is a standard format frame */ + cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> + XCAN_IDR_ID1_SHIFT; + if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan & + XCAN_IDR_SRR_MASK)) + cf->can_id |= CAN_RTR_FLAG; + } + + /* Check the frame received is FD or not*/ + if (dlc & XCAN_DLCR_EDL_MASK) { + for (i = 0; i < cf->len; i += 4) { + dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base) + + (dwindex * XCANFD_DW_BYTES); + data[0] = priv->read_reg(priv, dw_offset); + *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]); + dwindex++; + } + } else { + for (i = 0; i < cf->len; i += 4) { + dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base); + data[0] = priv->read_reg(priv, dw_offset + i); + *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]); + } + } + stats->rx_bytes += cf->len; + stats->rx_packets++; + netif_receive_skb(skb); + + return 1; +} + +/** * xcan_current_error_state - Get current error state from HW * @ndev: Pointer to net_device structure * @@ -924,7 +1084,7 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; } } - priv->can.can_stats.bus_error++; + priv->can.can_stats.bus_error++; } if (skb) { @@ -934,7 +1094,7 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) } netdev_dbg(ndev, "%s: error status register:0x%x\n", - __func__, priv->read_reg(priv, XCAN_ESR_OFFSET)); + __func__, priv->read_reg(priv, XCAN_ESR_OFFSET)); } /** @@ -960,6 +1120,7 @@ static void xcan_state_interrupt(struct net_device *ndev, u32 isr) /** * xcan_rx_fifo_get_next_frame - Get register offset of next RX frame + * @priv: Driver private data structure * * Return: Register offset of the next frame in RX FIFO. */ @@ -968,7 +1129,7 @@ static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv) int offset; if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) { - u32 fsr; + u32 fsr, mask; /* clear RXOK before the is-empty check so that any newly * received frame will reassert it without a race @@ -978,13 +1139,20 @@ static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv) fsr = priv->read_reg(priv, XCAN_FSR_OFFSET); /* check if RX FIFO is empty */ - if (!(fsr & XCAN_FSR_FL_MASK)) + if (priv->devtype.flags & XCAN_FLAG_CANFD_2) + mask = XCAN_2_FSR_FL_MASK; + else + mask = XCAN_FSR_FL_MASK; + + if (!(fsr & mask)) return -ENOENT; if (priv->devtype.flags & XCAN_FLAG_CANFD_2) - offset = XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK); + offset = + XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_2_FSR_RI_MASK); else - offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK); + offset = + XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK); } else { /* check if RX FIFO is empty */ @@ -1019,7 +1187,10 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) while ((frame_offset = xcan_rx_fifo_get_next_frame(priv)) >= 0 && (work_done < quota)) { - work_done += xcan_rx(ndev, frame_offset); + if (xcan_rx_int_mask(priv) & XCAN_IXR_RXOK_MASK) + work_done += xcanfd_rx(ndev, frame_offset); + else + work_done += xcan_rx(ndev, frame_offset); if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) /* increment read index */ @@ -1094,8 +1265,10 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) * via TXFEMP handling as we read TXFEMP *after* TXOK * clear to satisfy (1). */ - while ((isr & XCAN_IXR_TXOK_MASK) && !WARN_ON(++retries == 100)) { - priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + while ((isr & XCAN_IXR_TXOK_MASK) && + !WARN_ON(++retries == 100)) { + priv->write_reg(priv, XCAN_ICR_OFFSET, + XCAN_IXR_TXOK_MASK); isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } @@ -1208,12 +1381,12 @@ static int xcan_open(struct net_device *ndev) ret = pm_runtime_get_sync(priv->dev); if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", - __func__, ret); + __func__, ret); return ret; } ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags, - ndev->name, ndev); + ndev->name, ndev); if (ret < 0) { netdev_err(ndev, "irq allocation for CAN failed\n"); goto err; @@ -1284,7 +1457,7 @@ static int xcan_close(struct net_device *ndev) * Return: 0 on success and failure value on error */ static int xcan_get_berr_counter(const struct net_device *ndev, - struct can_berr_counter *bec) + struct can_berr_counter *bec) { struct xcan_priv *priv = netdev_priv(ndev); int ret; @@ -1292,7 +1465,7 @@ static int xcan_get_berr_counter(const struct net_device *ndev, ret = pm_runtime_get_sync(priv->dev); if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", - __func__, ret); + __func__, ret); return ret; } @@ -1305,7 +1478,6 @@ static int xcan_get_berr_counter(const struct net_device *ndev, return 0; } - static const struct net_device_ops xcan_netdev_ops = { .ndo_open = xcan_open, .ndo_stop = xcan_close, @@ -1417,6 +1589,8 @@ static const struct dev_pm_ops xcan_dev_pm_ops = { }; static const struct xcan_devtype_data xcan_zynq_data = { + .cantype = XZYNQ_CANPS, + .flags = XCAN_FLAG_TXFEMP, .bittiming_const = &xcan_bittiming_const, .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, @@ -1424,6 +1598,8 @@ static const struct xcan_devtype_data xcan_zynq_data = { }; static const struct xcan_devtype_data xcan_axi_data = { + .cantype = XAXI_CAN, + .flags = XCAN_FLAG_TXFEMP, .bittiming_const = &xcan_bittiming_const, .btr_ts2_shift = XCAN_BTR_TS2_SHIFT, .btr_sjw_shift = XCAN_BTR_SJW_SHIFT, @@ -1431,6 +1607,7 @@ static const struct xcan_devtype_data xcan_axi_data = { }; static const struct xcan_devtype_data xcan_canfd_data = { + .cantype = XAXI_CANFD, .flags = XCAN_FLAG_EXT_FILTERS | XCAN_FLAG_RXMNF | XCAN_FLAG_TX_MAILBOXES | @@ -1442,6 +1619,7 @@ static const struct xcan_devtype_data xcan_canfd_data = { }; static const struct xcan_devtype_data xcan_canfd2_data = { + .cantype = XAXI_CANFD_2_0, .flags = XCAN_FLAG_EXT_FILTERS | XCAN_FLAG_RXMNF | XCAN_FLAG_TX_MAILBOXES | @@ -1554,6 +1732,19 @@ static int xcan_probe(struct platform_device *pdev) priv->can.do_get_berr_counter = xcan_get_berr_counter; priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_BERR_REPORTING; + + if (devtype->cantype == XAXI_CANFD) + priv->can.data_bittiming_const = + &xcan_data_bittiming_const_canfd; + + if (devtype->cantype == XAXI_CANFD_2_0) + priv->can.data_bittiming_const = + &xcan_data_bittiming_const_canfd2; + + if (devtype->cantype == XAXI_CANFD || + devtype->cantype == XAXI_CANFD_2_0) + priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD; + priv->reg_base = addr; priv->tx_max = tx_max; priv->devtype = *devtype; @@ -1570,7 +1761,8 @@ static int xcan_probe(struct platform_device *pdev) /* Getting the CAN can_clk info */ priv->can_clk = devm_clk_get(&pdev->dev, "can_clk"); if (IS_ERR(priv->can_clk)) { - dev_err(&pdev->dev, "Device clock not found.\n"); + if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Device clock not found.\n"); ret = PTR_ERR(priv->can_clk); goto err_free; } @@ -1589,7 +1781,7 @@ static int xcan_probe(struct platform_device *pdev) ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n", - __func__, ret); + __func__, ret); goto err_pmdisable; } |