diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.h | 183 |
1 files changed, 138 insertions, 45 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index 92f36b6950dc..6a7708d5da37 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -33,12 +33,13 @@ #define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE +#define NET_SERDES_IF_XFI 1 +#define NET_SERDES_IF_SFI 2 +#define NET_SERDES_IF_KR 3 +#define NET_SERDES_IF_DXGXS 4 + #define SPEED_AUTO_NEG 0 -#define SPEED_12000 12000 -#define SPEED_12500 12500 -#define SPEED_13000 13000 -#define SPEED_15000 15000 -#define SPEED_16000 16000 +#define SPEED_20000 20000 #define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 #define SFP_EEPROM_VENDOR_NAME_SIZE 16 @@ -46,6 +47,12 @@ #define SFP_EEPROM_VENDOR_OUI_SIZE 3 #define SFP_EEPROM_PART_NO_ADDR 0x28 #define SFP_EEPROM_PART_NO_SIZE 16 +#define SFP_EEPROM_REVISION_ADDR 0x38 +#define SFP_EEPROM_REVISION_SIZE 4 +#define SFP_EEPROM_SERIAL_ADDR 0x44 +#define SFP_EEPROM_SERIAL_SIZE 16 +#define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */ +#define SFP_EEPROM_DATE_SIZE 6 #define PWR_FLT_ERR_MSG_LEN 250 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \ @@ -62,25 +69,26 @@ #define SINGLE_MEDIA(params) (params->num_phys == 2) /* Dual Media board contains two external phy with different media */ #define DUAL_MEDIA(params) (params->num_phys == 3) + +#define FW_PARAM_PHY_ADDR_MASK 0x000000FF +#define FW_PARAM_PHY_TYPE_MASK 0x0000FF00 +#define FW_PARAM_MDIO_CTRL_MASK 0xFFFF0000 #define FW_PARAM_MDIO_CTRL_OFFSET 16 +#define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \ + FW_PARAM_PHY_ADDR_MASK) +#define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \ + FW_PARAM_PHY_TYPE_MASK) +#define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \ + FW_PARAM_MDIO_CTRL_MASK) >> \ + FW_PARAM_MDIO_CTRL_OFFSET) #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \ (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET) -#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE 170 -#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE 0 - -#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE 250 -#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE 0 - -#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE 10 -#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE 90 - -#define PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE 50 -#define PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE 250 #define PFC_BRB_FULL_LB_XOFF_THRESHOLD 170 #define PFC_BRB_FULL_LB_XON_THRESHOLD 250 +#define MAXVAL(a, b) (((a) > (b)) ? (a) : (b)) /***********************************************************/ /* Structs */ /***********************************************************/ @@ -121,8 +129,8 @@ struct bnx2x_phy { /* Loaded during init */ u8 addr; - - u8 flags; + u8 def_md_devad; + u16 flags; /* Require HW lock */ #define FLAGS_HW_LOCK_REQUIRED (1<<0) /* No Over-Current detection */ @@ -131,11 +139,13 @@ struct bnx2x_phy { #define FLAGS_FAN_FAILURE_DET_REQ (1<<2) /* Initialize first the XGXS and only then the phy itself */ #define FLAGS_INIT_XGXS_FIRST (1<<3) +#define FLAGS_WC_DUAL_MODE (1<<4) +#define FLAGS_4_PORT_MODE (1<<5) #define FLAGS_REARM_LATCH_SIGNAL (1<<6) #define FLAGS_SFP_NOT_APPROVED (1<<7) +#define FLAGS_MDC_MDIO_WA (1<<8) +#define FLAGS_DUMMY_READ (1<<9) - u8 def_md_devad; - u8 reserved; /* preemphasis values for the rx side */ u16 rx_preemphasis[4]; @@ -153,6 +163,8 @@ struct bnx2x_phy { #define ETH_PHY_XFP_FIBER 0x2 #define ETH_PHY_DA_TWINAX 0x3 #define ETH_PHY_BASE_T 0x4 +#define ETH_PHY_KR 0xf0 +#define ETH_PHY_CX4 0xf1 #define ETH_PHY_NOT_PRESENT 0xff /* The address in which version is located*/ @@ -238,6 +250,8 @@ struct link_params { #define FEATURE_CONFIG_PFC_ENABLED (1<<1) #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3) +#define FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9) +#define FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10) /* Will be populated during common init */ struct bnx2x_phy phy[MAX_PHYS]; @@ -257,11 +271,19 @@ struct link_params { /* Output parameters */ struct link_vars { u8 phy_flags; +#define PHY_XGXS_FLAG (1<<0) +#define PHY_SGMII_FLAG (1<<1) +#define PHY_PHYSICAL_LINK_FLAG (1<<2) +#define PHY_HALF_OPEN_CONN_FLAG (1<<3) +#define PHY_OVER_CURRENT_FLAG (1<<4) +#define PHY_TX_ERROR_CHECK_FLAG (1<<5) u8 mac_type; #define MAC_TYPE_NONE 0 #define MAC_TYPE_EMAC 1 #define MAC_TYPE_BMAC 2 +#define MAC_TYPE_UMAC 3 +#define MAC_TYPE_XMAC 4 u8 phy_link_up; /* internal phy link indication */ u8 link_up; @@ -274,45 +296,52 @@ struct link_vars { /* The same definitions as the shmem parameter */ u32 link_status; + u8 fault_detected; + u8 rsrv1; + u16 periodic_flags; +#define PERIODIC_FLAGS_LINK_EVENT 0x0001 + + u32 aeu_int_mask; }; /***********************************************************/ /* Functions */ /***********************************************************/ -u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output); +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars); /* Reset the link. Should be called when driver or interface goes down Before calling phy firmware upgrade, the reset_ext_phy should be set to 0 */ -u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy); +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy); /* bnx2x_link_update should be called upon link interrupt */ -u8 bnx2x_link_update(struct link_params *input, struct link_vars *output); +int bnx2x_link_update(struct link_params *params, struct link_vars *vars); /* use the following phy functions to read/write from external_phy In order to use it to read/write internal phy registers, use DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as the register */ -u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 *ret_val); +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val); + +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val); -u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 val); /* Reads the link_status from the shmem, and update the link vars accordingly */ void bnx2x_link_status_update(struct link_params *input, struct link_vars *output); /* returns string representing the fw_version of the external phy */ -u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len); +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, + u8 *version, u16 len); /* Set/Unset the led Basically, the CLC takes care of the led for the link, but in case one needs to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to blink the led, and LED_MODE_OFF to set the led off.*/ -u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars, - u8 mode, u32 speed); +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed); #define LED_MODE_OFF 0 #define LED_MODE_ON 1 #define LED_MODE_OPER 2 @@ -324,12 +353,12 @@ void bnx2x_handle_module_detect_int(struct link_params *params); /* Get the actual link status. In case it returns 0, link is up, otherwise link is down*/ -u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars, - u8 is_serdes); +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes); /* One-time initialization for external phy after power up */ -u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u32 chip_id); +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id); /* Reset the external PHY using GPIO */ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); @@ -338,9 +367,9 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); /* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ -u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf); +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); void bnx2x_hw_reset_phy(struct link_params *params); @@ -352,11 +381,28 @@ u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 bnx2x_phy_selection(struct link_params *params); /* Probe the phys on board, and populate them in "params" */ -u8 bnx2x_phy_probe(struct link_params *params); +int bnx2x_phy_probe(struct link_params *params); + /* Checks if fan failure detection is required on one of the phys on board */ u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base, u8 port); + + +/* DCBX structs */ + +/* Number of maximum COS per chip */ +#define DCBX_E2E3_MAX_NUM_COS (2) +#define DCBX_E3B0_MAX_NUM_COS_PORT0 (6) +#define DCBX_E3B0_MAX_NUM_COS_PORT1 (3) +#define DCBX_E3B0_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS_PORT0, \ + DCBX_E3B0_MAX_NUM_COS_PORT1)) + +#define DCBX_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS, \ + DCBX_E2E3_MAX_NUM_COS)) + /* PFC port configuration params */ struct bnx2x_nig_brb_pfc_port_params { /* NIG */ @@ -364,8 +410,8 @@ struct bnx2x_nig_brb_pfc_port_params { u32 llfc_out_en; u32 llfc_enable; u32 pkt_priority_to_cos; - u32 rx_cos0_priority_mask; - u32 rx_cos1_priority_mask; + u8 num_of_rx_cos_priority_mask; + u32 rx_cos_priority_mask[DCBX_MAX_NUM_COS]; u32 llfc_high_priority_classes; u32 llfc_low_priority_classes; /* BRB */ @@ -373,27 +419,74 @@ struct bnx2x_nig_brb_pfc_port_params { u32 cos1_pauseable; }; + +/* ETS port configuration params */ +struct bnx2x_ets_bw_params { + u8 bw; +}; + +struct bnx2x_ets_sp_params { + /** + * valid values are 0 - 5. 0 is highest strict priority. + * There can't be two COS's with the same pri. + */ + u8 pri; +}; + +enum bnx2x_cos_state { + bnx2x_cos_state_strict = 0, + bnx2x_cos_state_bw = 1, +}; + +struct bnx2x_ets_cos_params { + enum bnx2x_cos_state state ; + union { + struct bnx2x_ets_bw_params bw_params; + struct bnx2x_ets_sp_params sp_params; + } params; +}; + +struct bnx2x_ets_params { + u8 num_of_cos; /* Number of valid COS entries*/ + struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS]; +}; + /** * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB * when link is already up */ -void bnx2x_update_pfc(struct link_params *params, +int bnx2x_update_pfc(struct link_params *params, struct link_vars *vars, struct bnx2x_nig_brb_pfc_port_params *pfc_params); /* Used to configure the ETS to disable */ -void bnx2x_ets_disabled(struct link_params *params); +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars); /* Used to configure the ETS to BW limited */ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, const u32 cos1_bw); /* Used to configure the ETS to strict */ -u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); + +/* Configure the COS to ETS according to BW and SP settings.*/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + const struct bnx2x_ets_params *ets_params); /* Read pfc statistic*/ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, u32 pfc_frames_sent[2], u32 pfc_frames_received[2]); +void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, + u32 chip_id, u32 shmem_base, u32 shmem2_base, + u8 port); + +int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params); + +void bnx2x_period_func(struct link_params *params, struct link_vars *vars); + #endif /* BNX2X_LINK_H */ |