diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 6355 |
1 files changed, 5247 insertions, 1108 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 076e11f5769f..bcd8f0038628 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -25,6 +25,8 @@ #include <linux/mutex.h> #include "bnx2x.h" +#include "bnx2x_cmn.h" + /********************************************************/ #define ETH_HLEN 14 @@ -35,6 +37,13 @@ #define ETH_MAX_JUMBO_PACKET_SIZE 9600 #define MDIO_ACCESS_TIMEOUT 1000 #define BMAC_CONTROL_RX_ENABLE 2 +#define WC_LANE_MAX 4 +#define I2C_SWITCH_WIDTH 2 +#define I2C_BSC0 0 +#define I2C_BSC1 1 +#define I2C_WA_RETRY_CNT 3 +#define MCPR_IMC_COMMAND_READ_OP 1 +#define MCPR_IMC_COMMAND_WRITE_OP 2 /***********************************************************/ /* Shortcut definitions */ @@ -103,16 +112,13 @@ MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG #define GP_STATUS_10G_CX4 \ MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 -#define GP_STATUS_12G_HIG \ - MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG -#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G -#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G -#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G -#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G #define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX #define GP_STATUS_10G_KX4 \ MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 - +#define GP_STATUS_10G_KR MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR +#define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI +#define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS +#define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI #define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD #define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD #define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD @@ -126,20 +132,10 @@ #define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD #define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD #define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD -#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD -#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD -#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD -#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD -#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD -#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD -#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD -#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD -#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD -#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD - -#define PHY_XGXS_FLAG 0x1 -#define PHY_SGMII_FLAG 0x2 -#define PHY_SERDES_FLAG 0x4 +#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD +#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD + + /* */ #define SFP_EEPROM_CON_TYPE_ADDR 0x2 @@ -165,8 +161,104 @@ #define EDC_MODE_PASSIVE_DAC 0x0055 +/* BRB thresholds for E2*/ +#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE 170 +#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 + +#define PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE 250 +#define PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 + +#define PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE 10 +#define PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 90 + +#define PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE 50 +#define PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE 250 + +/* BRB thresholds for E3A0 */ +#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE 290 +#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 + +#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE 410 +#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 + +#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE 10 +#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 170 + +#define PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE 50 +#define PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE 410 + + +/* BRB thresholds for E3B0 2 port mode*/ +#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 1025 +#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 + +#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE 1025 +#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 + +#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE 10 +#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 1025 + +#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE 50 +#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE 1025 + +/* only for E3B0*/ +#define PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR 1025 +#define PFC_E3B0_2P_BRB_FULL_LB_XON_THR 1025 + +/* Lossy +Lossless GUARANTIED == GUART */ +#define PFC_E3B0_2P_MIX_PAUSE_LB_GUART 284 +/* Lossless +Lossless*/ +#define PFC_E3B0_2P_PAUSE_LB_GUART 236 +/* Lossy +Lossy*/ +#define PFC_E3B0_2P_NON_PAUSE_LB_GUART 342 + +/* Lossy +Lossless*/ +#define PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART 284 +/* Lossless +Lossless*/ +#define PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART 236 +/* Lossy +Lossy*/ +#define PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART 336 +#define PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST 80 + +#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART 0 +#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST 0 + +/* BRB thresholds for E3B0 4 port mode */ +#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 304 +#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0 + +#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE 384 +#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0 + +#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE 10 +#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 304 + +#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE 50 +#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE 384 + + +/* only for E3B0*/ +#define PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR 304 +#define PFC_E3B0_4P_BRB_FULL_LB_XON_THR 384 +#define PFC_E3B0_4P_LB_GUART 120 + +#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART 120 +#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST 80 + +#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART 80 +#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST 120 + +#define DCBX_INVALID_COS (0xFF) + #define ETS_BW_LIMIT_CREDIT_UPPER_BOUND (0x5000) #define ETS_BW_LIMIT_CREDIT_WEIGHT (0x5000) +#define ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS (1360) +#define ETS_E3B0_NIG_MIN_W_VAL_20GBPS (2720) +#define ETS_E3B0_PBF_MIN_W_VAL (10000) + +#define MAX_PACKET_SIZE (9700) +#define WC_UC_TIMEOUT 100 + /**********************************************************/ /* INTERFACE */ /**********************************************************/ @@ -202,14 +294,86 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) } /******************************************************************/ +/* EPIO/GPIO section */ +/******************************************************************/ +static void bnx2x_get_epio(struct bnx2x *bp, u32 epio_pin, u32 *en) +{ + u32 epio_mask, gp_oenable; + *en = 0; + /* Sanity check */ + if (epio_pin > 31) { + DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to get\n", epio_pin); + return; + } + + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); + REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable & ~epio_mask); + + *en = (REG_RD(bp, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin; +} +static void bnx2x_set_epio(struct bnx2x *bp, u32 epio_pin, u32 en) +{ + u32 epio_mask, gp_output, gp_oenable; + + /* Sanity check */ + if (epio_pin > 31) { + DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to set\n", epio_pin); + return; + } + DP(NETIF_MSG_LINK, "Setting EPIO pin %d to %d\n", epio_pin, en); + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_output = REG_RD(bp, MCP_REG_MCPR_GP_OUTPUTS); + if (en) + gp_output |= epio_mask; + else + gp_output &= ~epio_mask; + + REG_WR(bp, MCP_REG_MCPR_GP_OUTPUTS, gp_output); + + /* Set the value for this EPIO */ + gp_oenable = REG_RD(bp, MCP_REG_MCPR_GP_OENABLE); + REG_WR(bp, MCP_REG_MCPR_GP_OENABLE, gp_oenable | epio_mask); +} + +static void bnx2x_set_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 val) +{ + if (pin_cfg == PIN_CFG_NA) + return; + if (pin_cfg >= PIN_CFG_EPIO0) { + bnx2x_set_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); + } else { + u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + bnx2x_set_gpio(bp, gpio_num, (u8)val, gpio_port); + } +} + +static u32 bnx2x_get_cfg_pin(struct bnx2x *bp, u32 pin_cfg, u32 *val) +{ + if (pin_cfg == PIN_CFG_NA) + return -EINVAL; + if (pin_cfg >= PIN_CFG_EPIO0) { + bnx2x_get_epio(bp, pin_cfg - PIN_CFG_EPIO0, val); + } else { + u8 gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + u8 gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + *val = bnx2x_get_gpio(bp, gpio_num, gpio_port); + } + return 0; + +} +/******************************************************************/ /* ETS section */ /******************************************************************/ -void bnx2x_ets_disabled(struct link_params *params) +static void bnx2x_ets_e2e3a0_disabled(struct link_params *params) { /* ETS disabled configuration*/ struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "ETS disabled configuration\n"); + DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n"); /* * mapping between entry priority to client number (0,1,2 -debug and @@ -262,7 +426,756 @@ void bnx2x_ets_disabled(struct link_params *params) /* Defines the number of consecutive slots for the strict priority */ REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0); } +/****************************************************************************** +* Description: +* Getting min_w_val will be set according to line speed . +*. +******************************************************************************/ +static u32 bnx2x_ets_get_min_w_val_nig(const struct link_vars *vars) +{ + u32 min_w_val = 0; + /* Calculate min_w_val.*/ + if (vars->link_up) { + if (SPEED_20000 == vars->line_speed) + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS; + } else + min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS; + /** + * If the link isn't up (static configuration for example ) The + * link will be according to 20GBPS. + */ + return min_w_val; +} +/****************************************************************************** +* Description: +* Getting credit upper bound form min_w_val. +*. +******************************************************************************/ +static u32 bnx2x_ets_get_credit_upper_bound(const u32 min_w_val) +{ + const u32 credit_upper_bound = (u32)MAXVAL((150 * min_w_val), + MAX_PACKET_SIZE); + return credit_upper_bound; +} +/****************************************************************************** +* Description: +* Set credit upper bound for NIG. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_nig( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4, credit_upper_bound); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 : + NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5, credit_upper_bound); + + if (0 == port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7, + credit_upper_bound); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8, + credit_upper_bound); + } +} +/****************************************************************************** +* Description: +* Will return the NIG ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured acording to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val = bnx2x_ets_get_min_w_val_nig(vars); + /** + * mapping between entry priority to client number (0,1,2 -debug and + * management clients, 3 - COS0 client, 4 - COS1, ... 8 - + * COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by + * reset value or init tool + */ + if (port) { + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, 0x543210); + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB, 0x0); + } else { + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8); + } + /** + * For strict priority entries defines the number of consecutive + * slots for the highest priority. + */ + /* TODO_ETS - Should be done by reset value or init tool */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS : + NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100); + /** + * mapping between the CREDIT_WEIGHT registers and actual client + * numbers + */ + /* TODO_ETS - Should be done by reset value or init tool */ + if (port) { + /*Port 1 has 6 COS*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543); + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x0); + } else { + /*Port 0 has 9 COS*/ + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB, + 0x43210876); + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5); + } + + /** + * Bitmap of 5bits length. Each bit specifies whether the entry behaves + * as strict. Bits 0,1,2 - debug and management entries, 3 - + * COS0 entry, 4 - COS1 entry. + * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT + * bit4 bit3 bit2 bit1 bit0 + * MCP and debug are strict + */ + if (port) + REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT, 0x3f); + else + REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1ff); + /* defines which entries (clients) are subjected to WFQ arbitration */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0); + + /** + * Please notice the register address are note continuous and a + * for here is note appropriate.In 2 port mode port0 only COS0-5 + * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4 + * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT + * are never used for WFQ + */ + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4, 0x0); + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5, 0x0); + if (0 == port) { + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7, 0x0); + REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8, 0x0); + } + + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val); +} +/****************************************************************************** +* Description: +* Set credit upper bound for PBF. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf( + const struct link_params *params, + const u32 min_w_val) +{ + struct bnx2x *bp = params->bp; + const u32 credit_upper_bound = + bnx2x_ets_get_credit_upper_bound(min_w_val); + const u8 port = params->port; + u32 base_upper_bound = 0; + u8 max_cos = 0; + u8 i = 0; + /** + * In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4 + * port mode port1 has COS0-2 that can be used for WFQ. + */ + if (0 == port) { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_upper_bound + (i << 2), credit_upper_bound); +} + +/****************************************************************************** +* Description: +* Will return the PBF ETS registers to init values.Except +* credit_upper_bound. +* That isn't used in this configuration (No WFQ is enabled) and will be +* configured acording to spec +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 i = 0; + u32 base_weight = 0; + u8 max_cos = 0; + + /** + * mapping between entry priority to client number 0 - COS0 + * client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num. + * TODO_ETS - Should be done by reset value or init tool + */ + if (port) + /* 0x688 (|011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , 0x688); + else + /* (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , 0x2C688); + + /* TODO_ETS - Should be done by reset value or init tool */ + if (port) + /* 0x688 (|011|0 10|00 1|000)*/ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1, 0x688); + else + /* 0x2C688 (10 1|100 |011|0 10|00 1|000) */ + REG_WR(bp, PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0, 0x2C688); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 : + PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 , 0x100); + + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , 0); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 , 0); + /** + * In 2 port mode port0 has COS0-5 that can be used for WFQ. + * In 4 port mode port1 has COS0-2 that can be used for WFQ. + */ + if (0 == port) { + base_weight = PBF_REG_COS0_WEIGHT_P0; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0; + } else { + base_weight = PBF_REG_COS0_WEIGHT_P1; + max_cos = DCBX_E3B0_MAX_NUM_COS_PORT1; + } + + for (i = 0; i < max_cos; i++) + REG_WR(bp, base_weight + (0x4 * i), 0); + + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); +} +/****************************************************************************** +* Description: +* E3B0 disable will return basicly the values to init values. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_disabled(const struct link_params *params, + const struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" + "\n"); + return -EINVAL; + } + + bnx2x_ets_e3b0_nig_disabled(params, vars); + + bnx2x_ets_e3b0_pbf_disabled(params); + + return 0; +} +/****************************************************************************** +* Description: +* Disable will return basicly the values to init values. +*. +******************************************************************************/ +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + + if ((CHIP_IS_E2(bp)) || (CHIP_IS_E3A0(bp))) + bnx2x_ets_e2e3a0_disabled(params); + else if (CHIP_IS_E3B0(bp)) + bnx2x_status = bnx2x_ets_e3b0_disabled(params, vars); + else { + DP(NETIF_MSG_LINK, "bnx2x_ets_disabled - chip not supported\n"); + return -EINVAL; + } + + return bnx2x_status; +} + +/****************************************************************************** +* Description +* Set the COS mappimg to SP and BW until this point all the COS are not +* set as SP or BW. +******************************************************************************/ +static int bnx2x_ets_e3b0_cli_map(const struct link_params *params, + const struct bnx2x_ets_params *ets_params, + const u8 cos_sp_bitmap, + const u8 cos_bw_bitmap) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 nig_cli_sp_bitmap = 0x7 | (cos_sp_bitmap << 3); + const u8 pbf_cli_sp_bitmap = cos_sp_bitmap; + const u8 nig_cli_subject2wfq_bitmap = cos_bw_bitmap << 3; + const u8 pbf_cli_subject2wfq_bitmap = cos_bw_bitmap; + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT : + NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, nig_cli_sp_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 , pbf_cli_sp_bitmap); + + REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ : + NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, + nig_cli_subject2wfq_bitmap); + + REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 : + PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0, + pbf_cli_subject2wfq_bitmap); + + return 0; +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, + const u8 cos_entry, + const u32 min_w_val_nig, + const u32 min_w_val_pbf, + const u16 total_bw, + const u8 bw, + const u8 port) +{ + u32 nig_reg_adress_crd_weight = 0; + u32 pbf_reg_adress_crd_weight = 0; + /* Calculate and set BW for this COS*/ + const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; + + switch (cos_entry) { + case 0: + nig_reg_adress_crd_weight = + (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS0_WEIGHT_P1 : PBF_REG_COS0_WEIGHT_P0; + break; + case 1: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1; + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS1_WEIGHT_P1 : PBF_REG_COS1_WEIGHT_P0; + break; + case 2: + nig_reg_adress_crd_weight = (port) ? + NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 : + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2; + + pbf_reg_adress_crd_weight = (port) ? + PBF_REG_COS2_WEIGHT_P1 : PBF_REG_COS2_WEIGHT_P0; + break; + case 3: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3; + pbf_reg_adress_crd_weight = + PBF_REG_COS3_WEIGHT_P0; + break; + case 4: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4; + pbf_reg_adress_crd_weight = PBF_REG_COS4_WEIGHT_P0; + break; + case 5: + if (port) + return -EINVAL; + nig_reg_adress_crd_weight = + NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5; + pbf_reg_adress_crd_weight = PBF_REG_COS5_WEIGHT_P0; + break; + } + + REG_WR(bp, nig_reg_adress_crd_weight, cos_bw_nig); + + REG_WR(bp, pbf_reg_adress_crd_weight, cos_bw_pbf); + + return 0; +} +/****************************************************************************** +* Description: +* Calculate the total BW.A value of 0 isn't legal. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_get_total_bw( + const struct link_params *params, + const struct bnx2x_ets_params *ets_params, + u16 *total_bw) +{ + struct bnx2x *bp = params->bp; + u8 cos_idx = 0; + + *total_bw = 0 ; + /* Calculate total BW requested */ + for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { + if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { + + if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" + "was set to 0\n"); + return -EINVAL; + } + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; + } + } + + /*Check taotl BW is valid */ + if ((100 != *total_bw) || (0 == *total_bw)) { + if (0 == *total_bw) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" + "shouldn't be 0\n"); + return -EINVAL; + } + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be" + "100\n"); + /** + * We can handle a case whre the BW isn't 100 this can happen + * if the TC are joined. + */ + } + return 0; +} + +/****************************************************************************** +* Description: +* Invalidate all the sp_pri_to_cos. +*. +******************************************************************************/ +static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos) +{ + u8 pri = 0; + for (pri = 0; pri < DCBX_MAX_NUM_COS; pri++) + sp_pri_to_cos[pri] = DCBX_INVALID_COS; +} +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos. +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, + u8 *sp_pri_to_cos, const u8 pri, + const u8 cos_entry) +{ + struct bnx2x *bp = params->bp; + const u8 port = params->port; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter There can't be two COS's with" + "the same strict pri\n"); + return -EINVAL; + } + + if (pri > max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid" + "parameter Illegal strict priority\n"); + return -EINVAL; + } + + sp_pri_to_cos[pri] = cos_entry; + return 0; + +} + +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in +* the sp_pri_cli register. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset, + const u8 pri_set, + const u8 pri_offset, + const u8 entry_size) +{ + u64 pri_cli_nig = 0; + pri_cli_nig = ((u64)(cos + cos_offset)) << (entry_size * + (pri_set + pri_offset)); + + return pri_cli_nig; +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for NIG. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set) +{ + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + const u8 nig_cos_offset = 3; + const u8 nig_pri_offset = 3; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, nig_cos_offset, pri_set, + nig_pri_offset, 4); + +} +/****************************************************************************** +* Description: +* Returns the correct value according to COS and priority in the +* sp_pri_cli register for PBF. +*. +******************************************************************************/ +static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set) +{ + const u8 pbf_cos_offset = 0; + const u8 pbf_pri_offset = 0; + + return bnx2x_e3b0_sp_get_pri_cli_reg(cos, pbf_cos_offset, pri_set, + pbf_pri_offset, 3); + +} + +/****************************************************************************** +* Description: +* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers +* according to sp_pri_to_cos.(which COS has higher priority) +*. +******************************************************************************/ +static int bnx2x_ets_e3b0_sp_set_pri_cli_reg(const struct link_params *params, + u8 *sp_pri_to_cos) +{ + struct bnx2x *bp = params->bp; + u8 i = 0; + const u8 port = params->port; + /* MCP Dbg0 and dbg1 are always with higher strict pri*/ + u64 pri_cli_nig = 0x210; + u32 pri_cli_pbf = 0x0; + u8 pri_set = 0; + u8 pri_bitmask = 0; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + + u8 cos_bit_to_set = (1 << max_num_of_cos) - 1; + + /* Set all the strict priority first */ + for (i = 0; i < max_num_of_cos; i++) { + if (DCBX_INVALID_COS != sp_pri_to_cos[i]) { + if (DCBX_MAX_NUM_COS <= sp_pri_to_cos[i]) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid cos entry\n"); + return -EINVAL; + } + + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + sp_pri_to_cos[i], pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + sp_pri_to_cos[i], pri_set); + pri_bitmask = 1 << sp_pri_to_cos[i]; + /* COS is used remove it from bitmap.*/ + if (0 == (pri_bitmask & cos_bit_to_set)) { + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_sp_set_pri_cli_reg " + "invalid There can't be two COS's with" + " the same strict pri\n"); + return -EINVAL; + } + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + /* Set all the Non strict priority i= COS*/ + for (i = 0; i < max_num_of_cos; i++) { + pri_bitmask = 1 << i; + /* Check if COS was already used for SP */ + if (pri_bitmask & cos_bit_to_set) { + /* COS wasn't used for SP */ + pri_cli_nig |= bnx2x_e3b0_sp_get_pri_cli_reg_nig( + i, pri_set); + + pri_cli_pbf |= bnx2x_e3b0_sp_get_pri_cli_reg_pbf( + i, pri_set); + /* COS is used remove it from bitmap.*/ + cos_bit_to_set &= ~pri_bitmask; + pri_set++; + } + } + + if (pri_set != max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_set_pri_cli_reg not all " + "entries were set\n"); + return -EINVAL; + } + + if (port) { + /* Only 6 usable clients*/ + REG_WR(bp, NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB, + (u32)pri_cli_nig); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 , pri_cli_pbf); + } else { + /* Only 9 usable clients*/ + const u32 pri_cli_nig_lsb = (u32) (pri_cli_nig); + const u32 pri_cli_nig_msb = (u32) ((pri_cli_nig >> 32) & 0xF); + + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, + pri_cli_nig_lsb); + REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, + pri_cli_nig_msb); + + REG_WR(bp, PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 , pri_cli_pbf); + } + return 0; +} + +/****************************************************************************** +* Description: +* Configure the COS to ETS according to BW and SP settings. +******************************************************************************/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + const struct bnx2x_ets_params *ets_params) +{ + struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + const u8 port = params->port; + u16 total_bw = 0; + const u32 min_w_val_nig = bnx2x_ets_get_min_w_val_nig(vars); + const u32 min_w_val_pbf = ETS_E3B0_PBF_MIN_W_VAL; + u8 cos_bw_bitmap = 0; + u8 cos_sp_bitmap = 0; + u8 sp_pri_to_cos[DCBX_MAX_NUM_COS] = {0}; + const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : + DCBX_E3B0_MAX_NUM_COS_PORT0; + u8 cos_entry = 0; + + if (!CHIP_IS_E3B0(bp)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" + "\n"); + return -EINVAL; + } + + if ((ets_params->num_of_cos > max_num_of_cos)) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config the number of COS " + "isn't supported\n"); + return -EINVAL; + } + + /* Prepare sp strict priority parameters*/ + bnx2x_ets_e3b0_sp_pri_to_cos_init(sp_pri_to_cos); + + /* Prepare BW parameters*/ + bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params, + &total_bw); + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed " + "\n"); + return -EINVAL; + } + + /** + * Upper bound is set according to current link speed (min_w_val + * should be the same for upper bound and COS credit val). + */ + bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig); + bnx2x_ets_e3b0_set_credit_upper_bound_pbf(params, min_w_val_pbf); + + + for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) { + if (bnx2x_cos_state_bw == ets_params->cos[cos_entry].state) { + cos_bw_bitmap |= (1 << cos_entry); + /** + * The function also sets the BW in HW(not the mappin + * yet) + */ + bnx2x_status = bnx2x_ets_e3b0_set_cos_bw( + bp, cos_entry, min_w_val_nig, min_w_val_pbf, + total_bw, + ets_params->cos[cos_entry].params.bw_params.bw, + port); + } else if (bnx2x_cos_state_strict == + ets_params->cos[cos_entry].state){ + cos_sp_bitmap |= (1 << cos_entry); + + bnx2x_status = bnx2x_ets_e3b0_sp_pri_to_cos_set( + params, + sp_pri_to_cos, + ets_params->cos[cos_entry].params.sp_params.pri, + cos_entry); + + } else { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not" + " valid\n"); + return -EINVAL; + } + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw " + "failed\n"); + return bnx2x_status; + } + } + + /* Set SP register (which COS has higher priority) */ + bnx2x_status = bnx2x_ets_e3b0_sp_set_pri_cli_reg(params, + sp_pri_to_cos); + + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg " + "failed\n"); + return bnx2x_status; + } + + /* Set client mapping of BW and strict */ + bnx2x_status = bnx2x_ets_e3b0_cli_map(params, ets_params, + cos_sp_bitmap, + cos_bw_bitmap); + + if (0 != bnx2x_status) { + DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config SP failed\n"); + return bnx2x_status; + } + return 0; +} static void bnx2x_ets_bw_limit_common(const struct link_params *params) { /* ETS disabled configuration */ @@ -342,7 +1255,7 @@ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, REG_WR(bp, PBF_REG_COS1_WEIGHT, cos1_credit_weight); } -u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos) +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos) { /* ETS disabled configuration*/ struct bnx2x *bp = params->bp; @@ -388,24 +1301,64 @@ u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos) /* PFC section */ /******************************************************************/ -static void bnx2x_bmac2_get_pfc_stat(struct link_params *params, - u32 pfc_frames_sent[2], - u32 pfc_frames_received[2]) +static void bnx2x_update_pfc_xmac(struct link_params *params, + struct link_vars *vars, + u8 is_lb) { - /* Read pfc statistic */ struct bnx2x *bp = params->bp; - u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : - NIG_REG_INGRESS_BMAC0_MEM; + u32 xmac_base; + u32 pause_val, pfc0_val, pfc1_val; - DP(NETIF_MSG_LINK, "pfc statistic read from BMAC\n"); + /* XMAC base adrr */ + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; - REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_STAT_GTPP, - pfc_frames_sent, 2); + /* Initialize pause and pfc registers */ + pause_val = 0x18000; + pfc0_val = 0xFFFF8000; + pfc1_val = 0x2; - REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_STAT_GRPP, - pfc_frames_received, 2); + /* No PFC support */ + if (!(params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED)) { + /* + * RX flow control - Process pause frame in receive direction + */ + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) + pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN; + + /* + * TX flow control - Send pause packet when buffer is full + */ + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN; + } else {/* PFC support */ + pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | + XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | + XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_TX_PFC_EN; + } + + /* Write pause and PFC registers */ + REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + + + /* Set MAC address for source TX Pause/PFC frames */ + REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_LO, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + (params->mac_addr[5]))); + REG_WR(bp, xmac_base + XMAC_REG_CTRL_SA_HI, + ((params->mac_addr[0] << 8) | + (params->mac_addr[1]))); + + udelay(30); } + + static void bnx2x_emac_get_pfc_stat(struct link_params *params, u32 pfc_frames_sent[2], u32 pfc_frames_received[2]) @@ -437,33 +1390,54 @@ static void bnx2x_emac_get_pfc_stat(struct link_params *params, pfc_frames_sent[0] = val_xon + val_xoff; } +/* Read pfc statistic*/ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, u32 pfc_frames_sent[2], u32 pfc_frames_received[2]) { /* Read pfc statistic */ struct bnx2x *bp = params->bp; - u32 val = 0; + DP(NETIF_MSG_LINK, "pfc statistic\n"); if (!vars->link_up) return; - val = REG_RD(bp, MISC_REG_RESET_REG_2); - if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) - == 0) { - DP(NETIF_MSG_LINK, "About to read stats from EMAC\n"); + if (MAC_TYPE_EMAC == vars->mac_type) { + DP(NETIF_MSG_LINK, "About to read PFC stats from EMAC\n"); bnx2x_emac_get_pfc_stat(params, pfc_frames_sent, pfc_frames_received); - } else { - DP(NETIF_MSG_LINK, "About to read stats from BMAC\n"); - bnx2x_bmac2_get_pfc_stat(params, pfc_frames_sent, - pfc_frames_received); } } /******************************************************************/ /* MAC/PBF section */ /******************************************************************/ +static void bnx2x_set_mdio_clk(struct bnx2x *bp, u32 chip_id, u8 port) +{ + u32 mode, emac_base; + /** + * Set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + + if (CHIP_IS_E2(bp)) + emac_base = GRCBASE_EMAC0; + else + emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + mode = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + mode &= ~(EMAC_MDIO_MODE_AUTO_POLL | + EMAC_MDIO_MODE_CLOCK_CNT); + if (USES_WARPCORE(bp)) + mode |= (74L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + else + mode |= (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + + mode |= (EMAC_MDIO_MODE_CLAUSE_45); + REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE, mode); + + udelay(40); +} + static void bnx2x_emac_init(struct link_params *params, struct link_vars *vars) { @@ -495,7 +1469,7 @@ static void bnx2x_emac_init(struct link_params *params, } timeout--; } while (val & EMAC_MODE_RESET); - + bnx2x_set_mdio_clk(bp, params->chip_id, port); /* Set mac address */ val = ((params->mac_addr[0] << 8) | params->mac_addr[1]); @@ -508,9 +1482,246 @@ static void bnx2x_emac_init(struct link_params *params, EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val); } -static u8 bnx2x_emac_enable(struct link_params *params, +static void bnx2x_set_xumac_nig(struct link_params *params, + u16 tx_pause_en, + u8 enable) +{ + struct bnx2x *bp = params->bp; + + REG_WR(bp, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN, + enable); + REG_WR(bp, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN, + enable); + REG_WR(bp, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN : + NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en); +} + +static void bnx2x_umac_enable(struct link_params *params, struct link_vars *vars, u8 lb) { + u32 val; + u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + struct bnx2x *bp = params->bp; + /* Reset UMAC */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + usleep_range(1000, 1000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + + DP(NETIF_MSG_LINK, "enabling UMAC\n"); + + /** + * This register determines on which events the MAC will assert + * error on the i/f to the NIG along w/ EOP. + */ + + /** + * BD REG_WR(bp, NIG_REG_P0_MAC_RSV_ERR_MASK + + * params->port*0x14, 0xfffff. + */ + /* This register opens the gate for the UMAC despite its name */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); + + val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN | + UMAC_COMMAND_CONFIG_REG_PAD_EN | + UMAC_COMMAND_CONFIG_REG_SW_RESET | + UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK; + switch (vars->line_speed) { + case SPEED_10: + val |= (0<<2); + break; + case SPEED_100: + val |= (1<<2); + break; + case SPEED_1000: + val |= (2<<2); + break; + case SPEED_2500: + val |= (3<<2); + break; + default: + DP(NETIF_MSG_LINK, "Invalid speed for UMAC %d\n", + vars->line_speed); + break; + } + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + udelay(50); + + /* Set MAC address for source TX Pause/PFC frames (under SW reset) */ + REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR0, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | + (params->mac_addr[5]))); + REG_WR(bp, umac_base + UMAC_REG_MAC_ADDR1, + ((params->mac_addr[0] << 8) | + (params->mac_addr[1]))); + + /* Enable RX and TX */ + val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN; + val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA; + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + udelay(50); + + /* Remove SW Reset */ + val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET; + + /* Check loopback mode */ + if (lb) + val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA; + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); + + /* + * Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); + bnx2x_set_xumac_nig(params, + ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); + vars->mac_type = MAC_TYPE_UMAC; + +} + +static u8 bnx2x_is_4_port_mode(struct bnx2x *bp) +{ + u32 port4mode_ovwr_val; + /* Check 4-port override enabled */ + port4mode_ovwr_val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); + if (port4mode_ovwr_val & (1<<0)) { + /* Return 4-port mode override value */ + return ((port4mode_ovwr_val & (1<<1)) == (1<<1)); + } + /* Return 4-port mode from input pin */ + return (u8)REG_RD(bp, MISC_REG_PORT4MODE_EN); +} + +/* Define the XMAC mode */ +static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed) +{ + u32 is_port4mode = bnx2x_is_4_port_mode(bp); + + /** + * In 4-port mode, need to set the mode only once, so if XMAC is + * already out of reset, it means the mode has already been set, + * and it must not* reset the XMAC again, since it controls both + * ports of the path + **/ + + if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC)) { + DP(NETIF_MSG_LINK, "XMAC already out of reset" + " in 4-port mode\n"); + return; + } + + /* Hard reset */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC); + usleep_range(1000, 1000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC); + if (is_port4mode) { + DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n"); + + /* Set the number of ports on the system side to up to 2 */ + REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 1); + + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + /* Set the number of ports on the system side to 1 */ + REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0); + if (max_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1" + " port per path\n"); + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports" + " per path\n"); + /* Set the number of ports on the Warp Core to 20G */ + REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1); + } + } + /* Soft reset */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + usleep_range(1000, 1000); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + +} + +static void bnx2x_xmac_disable(struct link_params *params) +{ + u8 port = params->port; + struct bnx2x *bp = params->bp; + u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC) { + DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port); + REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0); + usleep_range(1000, 1000); + bnx2x_set_xumac_nig(params, 0, 0); + REG_WR(bp, xmac_base + XMAC_REG_CTRL, + XMAC_CTRL_REG_SOFT_RESET); + } +} + +static int bnx2x_xmac_enable(struct link_params *params, + struct link_vars *vars, u8 lb) +{ + u32 val, xmac_base; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "enabling XMAC\n"); + + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + bnx2x_xmac_init(bp, vars->line_speed); + + /* + * This register determines on which events the MAC will assert + * error on the i/f to the NIG along w/ EOP. + */ + + /* + * This register tells the NIG whether to send traffic to UMAC + * or XMAC + */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0); + + /* Set Max packet size */ + REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710); + + /* CRC append for Tx packets */ + REG_WR(bp, xmac_base + XMAC_REG_TX_CTRL, 0xC800); + + /* update PFC */ + bnx2x_update_pfc_xmac(params, vars, 0); + + /* Enable TX and RX */ + val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN; + + /* Check loopback mode */ + if (lb) + val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK; + REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); + bnx2x_set_xumac_nig(params, + ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); + + vars->mac_type = MAC_TYPE_XMAC; + + return 0; +} +static int bnx2x_emac_enable(struct link_params *params, + struct link_vars *vars, u8 lb) +{ struct bnx2x *bp = params->bp; u8 port = params->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; @@ -760,95 +1971,398 @@ static void bnx2x_update_pfc_bmac2(struct link_params *params, REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); } -static void bnx2x_update_pfc_brb(struct link_params *params, - struct link_vars *vars, - struct bnx2x_nig_brb_pfc_port_params *pfc_params) + +/* PFC BRB internal port configuration params */ +struct bnx2x_pfc_brb_threshold_val { + u32 pause_xoff; + u32 pause_xon; + u32 full_xoff; + u32 full_xon; +}; + +struct bnx2x_pfc_brb_e3b0_val { + u32 full_lb_xoff_th; + u32 full_lb_xon_threshold; + u32 lb_guarantied; + u32 mac_0_class_t_guarantied; + u32 mac_0_class_t_guarantied_hyst; + u32 mac_1_class_t_guarantied; + u32 mac_1_class_t_guarantied_hyst; +}; + +struct bnx2x_pfc_brb_th_val { + struct bnx2x_pfc_brb_threshold_val pauseable_th; + struct bnx2x_pfc_brb_threshold_val non_pauseable_th; +}; +static int bnx2x_pfc_brb_get_config_params( + struct link_params *params, + struct bnx2x_pfc_brb_th_val *config_val) { struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting PFC BRB configuration\n"); + if (CHIP_IS_E2(bp)) { + config_val->pauseable_th.pause_xoff = + PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE; + config_val->pauseable_th.pause_xon = + PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE; + config_val->pauseable_th.full_xoff = + PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE; + config_val->pauseable_th.full_xon = + PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE; + /* non pause able*/ + config_val->non_pauseable_th.pause_xoff = + PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.pause_xon = + PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xoff = + PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xon = + PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE; + } else if (CHIP_IS_E3A0(bp)) { + config_val->pauseable_th.pause_xoff = + PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE; + config_val->pauseable_th.pause_xon = + PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE; + config_val->pauseable_th.full_xoff = + PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE; + config_val->pauseable_th.full_xon = + PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE; + /* non pause able*/ + config_val->non_pauseable_th.pause_xoff = + PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.pause_xon = + PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xoff = + PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xon = + PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE; + } else if (CHIP_IS_E3B0(bp)) { + if (params->phy[INT_PHY].flags & + FLAGS_4_PORT_MODE) { + config_val->pauseable_th.pause_xoff = + PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE; + config_val->pauseable_th.pause_xon = + PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE; + config_val->pauseable_th.full_xoff = + PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE; + config_val->pauseable_th.full_xon = + PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE; + /* non pause able*/ + config_val->non_pauseable_th.pause_xoff = + PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.pause_xon = + PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xoff = + PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xon = + PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE; + } else { + config_val->pauseable_th.pause_xoff = + PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE; + config_val->pauseable_th.pause_xon = + PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE; + config_val->pauseable_th.full_xoff = + PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE; + config_val->pauseable_th.full_xon = + PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE; + /* non pause able*/ + config_val->non_pauseable_th.pause_xoff = + PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.pause_xon = + PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xoff = + PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE; + config_val->non_pauseable_th.full_xon = + PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE; + } + } else + return -EINVAL; + + return 0; +} + + +static void bnx2x_pfc_brb_get_e3b0_config_params(struct link_params *params, + struct bnx2x_pfc_brb_e3b0_val + *e3b0_val, + u32 cos0_pauseable, + u32 cos1_pauseable) +{ + if (params->phy[INT_PHY].flags & FLAGS_4_PORT_MODE) { + e3b0_val->full_lb_xoff_th = + PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR; + e3b0_val->full_lb_xon_threshold = + PFC_E3B0_4P_BRB_FULL_LB_XON_THR; + e3b0_val->lb_guarantied = + PFC_E3B0_4P_LB_GUART; + e3b0_val->mac_0_class_t_guarantied = + PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART; + e3b0_val->mac_0_class_t_guarantied_hyst = + PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST; + e3b0_val->mac_1_class_t_guarantied = + PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART; + e3b0_val->mac_1_class_t_guarantied_hyst = + PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST; + } else { + e3b0_val->full_lb_xoff_th = + PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR; + e3b0_val->full_lb_xon_threshold = + PFC_E3B0_2P_BRB_FULL_LB_XON_THR; + e3b0_val->mac_0_class_t_guarantied_hyst = + PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST; + e3b0_val->mac_1_class_t_guarantied = + PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART; + e3b0_val->mac_1_class_t_guarantied_hyst = + PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST; + + if (cos0_pauseable != cos1_pauseable) { + /* nonpauseable= Lossy + pauseable = Lossless*/ + e3b0_val->lb_guarantied = + PFC_E3B0_2P_MIX_PAUSE_LB_GUART; + e3b0_val->mac_0_class_t_guarantied = + PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART; + } else if (cos0_pauseable) { + /* Lossless +Lossless*/ + e3b0_val->lb_guarantied = + PFC_E3B0_2P_PAUSE_LB_GUART; + e3b0_val->mac_0_class_t_guarantied = + PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART; + } else { + /* Lossy +Lossy*/ + e3b0_val->lb_guarantied = + PFC_E3B0_2P_NON_PAUSE_LB_GUART; + e3b0_val->mac_0_class_t_guarantied = + PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART; + } + } +} +static int bnx2x_update_pfc_brb(struct link_params *params, + struct link_vars *vars, + struct bnx2x_nig_brb_pfc_port_params + *pfc_params) +{ + struct bnx2x *bp = params->bp; + struct bnx2x_pfc_brb_th_val config_val = { {0} }; + struct bnx2x_pfc_brb_threshold_val *reg_th_config = + &config_val.pauseable_th; + struct bnx2x_pfc_brb_e3b0_val e3b0_val = {0}; int set_pfc = params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED; + int bnx2x_status = 0; + u8 port = params->port; /* default - pause configuration */ - u32 pause_xoff_th = PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE; - u32 pause_xon_th = PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE; - u32 full_xoff_th = PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE; - u32 full_xon_th = PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE; + reg_th_config = &config_val.pauseable_th; + bnx2x_status = bnx2x_pfc_brb_get_config_params(params, &config_val); + if (0 != bnx2x_status) + return bnx2x_status; if (set_pfc && pfc_params) /* First COS */ - if (!pfc_params->cos0_pauseable) { - pause_xoff_th = - PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE; - pause_xon_th = - PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE; - full_xoff_th = - PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE; - full_xon_th = - PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE; - } + if (!pfc_params->cos0_pauseable) + reg_th_config = &config_val.non_pauseable_th; /* * The number of free blocks below which the pause signal to class 0 * of MAC #n is asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 , pause_xoff_th); + REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 : + BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 , + reg_th_config->pause_xoff); /* * The number of free blocks above which the pause signal to class 0 * of MAC #n is de-asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , pause_xon_th); + REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XON_THRESHOLD_1 : + BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , reg_th_config->pause_xon); /* * The number of free blocks below which the full signal to class 0 * of MAC #n is asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , full_xoff_th); + REG_WR(bp, (port) ? BRB1_REG_FULL_0_XOFF_THRESHOLD_1 : + BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , reg_th_config->full_xoff); /* * The number of free blocks above which the full signal to class 0 * of MAC #n is de-asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_FULL_0_XON_THRESHOLD_0 , full_xon_th); + REG_WR(bp, (port) ? BRB1_REG_FULL_0_XON_THRESHOLD_1 : + BRB1_REG_FULL_0_XON_THRESHOLD_0 , reg_th_config->full_xon); if (set_pfc && pfc_params) { /* Second COS */ - if (pfc_params->cos1_pauseable) { - pause_xoff_th = - PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE; - pause_xon_th = - PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE; - full_xoff_th = - PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE; - full_xon_th = - PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE; - } else { - pause_xoff_th = - PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE; - pause_xon_th = - PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE; - full_xoff_th = - PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE; - full_xon_th = - PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE; - } + if (pfc_params->cos1_pauseable) + reg_th_config = &config_val.pauseable_th; + else + reg_th_config = &config_val.non_pauseable_th; /* * The number of free blocks below which the pause signal to * class 1 of MAC #n is asserted. n=0,1 - */ - REG_WR(bp, BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0, pause_xoff_th); + **/ + REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 : + BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0, + reg_th_config->pause_xoff); /* * The number of free blocks above which the pause signal to * class 1 of MAC #n is de-asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_PAUSE_1_XON_THRESHOLD_0, pause_xon_th); + REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XON_THRESHOLD_1 : + BRB1_REG_PAUSE_1_XON_THRESHOLD_0, + reg_th_config->pause_xon); /* * The number of free blocks below which the full signal to * class 1 of MAC #n is asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_FULL_1_XOFF_THRESHOLD_0, full_xoff_th); + REG_WR(bp, (port) ? BRB1_REG_FULL_1_XOFF_THRESHOLD_1 : + BRB1_REG_FULL_1_XOFF_THRESHOLD_0, + reg_th_config->full_xoff); /* * The number of free blocks above which the full signal to * class 1 of MAC #n is de-asserted. n=0,1 */ - REG_WR(bp, BRB1_REG_FULL_1_XON_THRESHOLD_0, full_xon_th); + REG_WR(bp, (port) ? BRB1_REG_FULL_1_XON_THRESHOLD_1 : + BRB1_REG_FULL_1_XON_THRESHOLD_0, + reg_th_config->full_xon); + + + if (CHIP_IS_E3B0(bp)) { + /*Should be done by init tool */ + /* + * BRB_empty_for_dup = BRB1_REG_BRB_EMPTY_THRESHOLD + * reset value + * 944 + */ + + /** + * The hysteresis on the guarantied buffer space for the Lb port + * before signaling XON. + **/ + REG_WR(bp, BRB1_REG_LB_GUARANTIED_HYST, 80); + + bnx2x_pfc_brb_get_e3b0_config_params( + params, + &e3b0_val, + pfc_params->cos0_pauseable, + pfc_params->cos1_pauseable); + /** + * The number of free blocks below which the full signal to the + * LB port is asserted. + */ + REG_WR(bp, BRB1_REG_FULL_LB_XOFF_THRESHOLD, + e3b0_val.full_lb_xoff_th); + /** + * The number of free blocks above which the full signal to the + * LB port is de-asserted. + */ + REG_WR(bp, BRB1_REG_FULL_LB_XON_THRESHOLD, + e3b0_val.full_lb_xon_threshold); + /** + * The number of blocks guarantied for the MAC #n port. n=0,1 + */ + + /*The number of blocks guarantied for the LB port.*/ + REG_WR(bp, BRB1_REG_LB_GUARANTIED, + e3b0_val.lb_guarantied); + + /** + * The number of blocks guarantied for the MAC #n port. + */ + REG_WR(bp, BRB1_REG_MAC_GUARANTIED_0, + 2 * e3b0_val.mac_0_class_t_guarantied); + REG_WR(bp, BRB1_REG_MAC_GUARANTIED_1, + 2 * e3b0_val.mac_1_class_t_guarantied); + /** + * The number of blocks guarantied for class #t in MAC0. t=0,1 + */ + REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED, + e3b0_val.mac_0_class_t_guarantied); + REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED, + e3b0_val.mac_0_class_t_guarantied); + /** + * The hysteresis on the guarantied buffer space for class in + * MAC0. t=0,1 + */ + REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST, + e3b0_val.mac_0_class_t_guarantied_hyst); + REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST, + e3b0_val.mac_0_class_t_guarantied_hyst); + + /** + * The number of blocks guarantied for class #t in MAC1.t=0,1 + */ + REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED, + e3b0_val.mac_1_class_t_guarantied); + REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED, + e3b0_val.mac_1_class_t_guarantied); + /** + * The hysteresis on the guarantied buffer space for class #t + * in MAC1. t=0,1 + */ + REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST, + e3b0_val.mac_1_class_t_guarantied_hyst); + REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST, + e3b0_val.mac_1_class_t_guarantied_hyst); + + } + + } + + return bnx2x_status; +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +int bnx2x_pfc_nig_rx_priority_mask(struct bnx2x *bp, + u8 cos_entry, + u32 priority_mask, u8 port) +{ + u32 nig_reg_rx_priority_mask_add = 0; + + switch (cos_entry) { + case 0: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS0_PRIORITY_MASK : + NIG_REG_P0_RX_COS0_PRIORITY_MASK; + break; + case 1: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS1_PRIORITY_MASK : + NIG_REG_P0_RX_COS1_PRIORITY_MASK; + break; + case 2: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS2_PRIORITY_MASK : + NIG_REG_P0_RX_COS2_PRIORITY_MASK; + break; + case 3: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK; + break; + case 4: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK; + break; + case 5: + if (port) + return -EINVAL; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK; + break; } + + REG_WR(bp, nig_reg_rx_priority_mask_add, priority_mask); + + return 0; +} +static void bnx2x_update_mng(struct link_params *params, u32 link_status) +{ + struct bnx2x *bp = params->bp; + + REG_WR(bp, params->shmem_base + + offsetof(struct shmem_region, + port_mb[params->port].link_status), link_status); } static void bnx2x_update_pfc_nig(struct link_params *params, @@ -858,9 +2372,9 @@ static void bnx2x_update_pfc_nig(struct link_params *params, u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0; u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0; u32 pkt_priority_to_cos = 0; - u32 val; struct bnx2x *bp = params->bp; - int port = params->port; + u8 port = params->port; + int set_pfc = params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED; DP(NETIF_MSG_LINK, "updating pfc nig parameters\n"); @@ -881,6 +2395,9 @@ static void bnx2x_update_pfc_nig(struct link_params *params, pause_enable = 0; llfc_out_en = 0; llfc_enable = 0; + if (CHIP_IS_E3(bp)) + ppp_enable = 0; + else ppp_enable = 1; xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); @@ -899,6 +2416,9 @@ static void bnx2x_update_pfc_nig(struct link_params *params, xcm0_out_en = 1; } + if (CHIP_IS_E3(bp)) + REG_WR(bp, port ? NIG_REG_BRB1_PAUSE_IN_EN : + NIG_REG_BRB0_PAUSE_IN_EN, pause_enable); REG_WR(bp, port ? NIG_REG_LLFC_OUT_EN_1 : NIG_REG_LLFC_OUT_EN_0, llfc_out_en); REG_WR(bp, port ? NIG_REG_LLFC_ENABLE_1 : @@ -920,30 +2440,13 @@ static void bnx2x_update_pfc_nig(struct link_params *params, /* HW PFC TX enable */ REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable); - /* 0x2 = BMAC, 0x1= EMAC */ - switch (vars->mac_type) { - case MAC_TYPE_EMAC: - val = 1; - break; - case MAC_TYPE_BMAC: - val = 0; - break; - default: - val = 0; - break; - } - REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT, val); - if (nig_params) { + u8 i = 0; pkt_priority_to_cos = nig_params->pkt_priority_to_cos; - REG_WR(bp, port ? NIG_REG_P1_RX_COS0_PRIORITY_MASK : - NIG_REG_P0_RX_COS0_PRIORITY_MASK, - nig_params->rx_cos0_priority_mask); - - REG_WR(bp, port ? NIG_REG_P1_RX_COS1_PRIORITY_MASK : - NIG_REG_P0_RX_COS1_PRIORITY_MASK, - nig_params->rx_cos1_priority_mask); + for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++) + bnx2x_pfc_nig_rx_priority_mask(bp, i, + nig_params->rx_cos_priority_mask[i], port); REG_WR(bp, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 : NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0, @@ -958,8 +2461,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params, pkt_priority_to_cos); } - -void bnx2x_update_pfc(struct link_params *params, +int bnx2x_update_pfc(struct link_params *params, struct link_vars *vars, struct bnx2x_nig_brb_pfc_port_params *pfc_params) { @@ -970,41 +2472,59 @@ void bnx2x_update_pfc(struct link_params *params, */ u32 val; struct bnx2x *bp = params->bp; + int bnx2x_status = 0; + u8 bmac_loopback = (params->loopback_mode == LOOPBACK_BMAC); + + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + + bnx2x_update_mng(params, vars->link_status); /* update NIG params */ bnx2x_update_pfc_nig(params, vars, pfc_params); /* update BRB params */ - bnx2x_update_pfc_brb(params, vars, pfc_params); + bnx2x_status = bnx2x_update_pfc_brb(params, vars, pfc_params); + if (0 != bnx2x_status) + return bnx2x_status; if (!vars->link_up) - return; - - val = REG_RD(bp, MISC_REG_RESET_REG_2); - if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) - == 0) { - DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n"); - bnx2x_emac_enable(params, vars, 0); - return; - } + return bnx2x_status; DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n"); - if (CHIP_IS_E2(bp)) - bnx2x_update_pfc_bmac2(params, vars, 0); - else - bnx2x_update_pfc_bmac1(params, vars); + if (CHIP_IS_E3(bp)) + bnx2x_update_pfc_xmac(params, vars, 0); + else { + val = REG_RD(bp, MISC_REG_RESET_REG_2); + if ((val & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) + == 0) { + DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n"); + bnx2x_emac_enable(params, vars, 0); + return bnx2x_status; + } - val = 0; - if ((params->feature_config_flags & - FEATURE_CONFIG_PFC_ENABLED) || - (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) - val = 1; - REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val); + if (CHIP_IS_E2(bp)) + bnx2x_update_pfc_bmac2(params, vars, bmac_loopback); + else + bnx2x_update_pfc_bmac1(params, vars); + + val = 0; + if ((params->feature_config_flags & + FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val = 1; + REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val); + } + return bnx2x_status; } -static u8 bnx2x_bmac1_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) + +static int bnx2x_bmac1_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb) { struct bnx2x *bp = params->bp; u8 port = params->port; @@ -1063,12 +2583,18 @@ static u8 bnx2x_bmac1_enable(struct link_params *params, REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, wb_data, 2); + if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) { + REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS, + wb_data, 2); + if (wb_data[0] > 0) + return -ESRCH; + } return 0; } -static u8 bnx2x_bmac2_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) +static int bnx2x_bmac2_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb) { struct bnx2x *bp = params->bp; u8 port = params->port; @@ -1128,14 +2654,25 @@ static u8 bnx2x_bmac2_enable(struct link_params *params, udelay(30); bnx2x_update_pfc_bmac2(params, vars, is_lb); + if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) { + REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT, + wb_data, 2); + if (wb_data[0] > 0) { + DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n", + wb_data[0]); + return -ESRCH; + } + } + return 0; } -static u8 bnx2x_bmac_enable(struct link_params *params, - struct link_vars *vars, - u8 is_lb) +static int bnx2x_bmac_enable(struct link_params *params, + struct link_vars *vars, + u8 is_lb) { - u8 rc, port = params->port; + int rc = 0; + u8 port = params->port; struct bnx2x *bp = params->bp; u32 val; /* reset and unreset the BigMac */ @@ -1173,16 +2710,6 @@ static u8 bnx2x_bmac_enable(struct link_params *params, return rc; } - -static void bnx2x_update_mng(struct link_params *params, u32 link_status) -{ - struct bnx2x *bp = params->bp; - - REG_WR(bp, params->shmem_base + - offsetof(struct shmem_region, - port_mb[params->port].link_status), link_status); -} - static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port) { u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : @@ -1218,8 +2745,8 @@ static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port) } } -static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, - u32 line_speed) +static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, + u32 line_speed) { struct bnx2x *bp = params->bp; u8 port = params->port; @@ -1269,18 +2796,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, case SPEED_10000: init_crd = thresh + 553 - 22; break; - - case SPEED_12000: - init_crd = thresh + 664 - 22; - break; - - case SPEED_13000: - init_crd = thresh + 742 - 22; - break; - - case SPEED_16000: - init_crd = thresh + 778 - 22; - break; default: DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed); @@ -1349,31 +2864,23 @@ static u32 bnx2x_get_emac_base(struct bnx2x *bp, } /******************************************************************/ -/* CL45 access functions */ +/* CL22 access functions */ /******************************************************************/ -static u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, - u8 devad, u16 reg, u16 val) +static int bnx2x_cl22_write(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 reg, u16 val) { - u32 tmp, saved_mode; - u8 i, rc = 0; - /* - * Set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - - saved_mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL | - EMAC_MDIO_MODE_CLOCK_CNT); - tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); + u32 tmp, mode; + u8 i; + int rc = 0; + /* Switch to CL22 */ + mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); /* address */ - - tmp = ((phy->addr << 21) | (devad << 16) | reg | - EMAC_MDIO_COMM_COMMAND_ADDRESS | + tmp = ((phy->addr << 21) | (reg << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_22 | EMAC_MDIO_COMM_START_BUSY); REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); @@ -1388,57 +2895,60 @@ static u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, } if (tmp & EMAC_MDIO_COMM_START_BUSY) { DP(NETIF_MSG_LINK, "write phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); rc = -EFAULT; - } else { - /* data */ - tmp = ((phy->addr << 21) | (devad << 16) | val | - EMAC_MDIO_COMM_COMMAND_WRITE_45 | - EMAC_MDIO_COMM_START_BUSY); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + } + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); + return rc; +} - for (i = 0; i < 50; i++) { - udelay(10); +static int bnx2x_cl22_read(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 reg, u16 *ret_val) +{ + u32 val, mode; + u16 i; + int rc = 0; - tmp = REG_RD(bp, phy->mdio_ctrl + - EMAC_REG_EMAC_MDIO_COMM); - if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { - udelay(5); - break; - } - } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { - DP(NETIF_MSG_LINK, "write phy register failed\n"); - netdev_err(bp->dev, "MDC/MDIO access timeout\n"); - rc = -EFAULT; + /* Switch to CL22 */ + mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); + + /* address */ + val = ((phy->addr << 21) | (reg << 16) | + EMAC_MDIO_COMM_COMMAND_READ_22 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + udelay(10); + + val = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + *ret_val = (u16)(val & EMAC_MDIO_COMM_DATA); + udelay(5); + break; } } + if (val & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "read phy register failed\n"); - /* Restore the saved mode */ - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode); - + *ret_val = 0; + rc = -EFAULT; + } + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); return rc; } -static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, - u8 devad, u16 reg, u16 *ret_val) +/******************************************************************/ +/* CL45 access functions */ +/******************************************************************/ +static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 *ret_val) { - u32 val, saved_mode; + u32 val; u16 i; - u8 rc = 0; - /* - * Set clause 45 mode, slow down the MDIO clock to 2.5MHz - * (a value of 49==0x31) and make sure that the AUTO poll is off - */ - - saved_mode = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - val = saved_mode & ~((EMAC_MDIO_MODE_AUTO_POLL | - EMAC_MDIO_MODE_CLOCK_CNT)); - val |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); + int rc = 0; /* address */ val = ((phy->addr << 21) | (devad << 16) | reg | @@ -1460,7 +2970,6 @@ static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, netdev_err(bp->dev, "MDC/MDIO access timeout\n"); *ret_val = 0; rc = -EFAULT; - } else { /* data */ val = ((phy->addr << 21) | (devad << 16) | @@ -1485,15 +2994,214 @@ static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, rc = -EFAULT; } } + /* Work around for E3 A0 */ + if (phy->flags & FLAGS_MDC_MDIO_WA) { + phy->flags ^= FLAGS_DUMMY_READ; + if (phy->flags & FLAGS_DUMMY_READ) { + u16 temp_val; + bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); + } + } + + return rc; +} + +static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 val) +{ + u32 tmp; + u8 i; + int rc = 0; + + /* address */ + + tmp = ((phy->addr << 21) | (devad << 16) | reg | + EMAC_MDIO_COMM_COMMAND_ADDRESS | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + udelay(10); + + tmp = REG_RD(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + rc = -EFAULT; + + } else { + /* data */ + tmp = ((phy->addr << 21) | (devad << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_45 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + udelay(10); + + tmp = REG_RD(bp, phy->mdio_ctrl + + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); + rc = -EFAULT; + } + } + /* Work around for E3 A0 */ + if (phy->flags & FLAGS_MDC_MDIO_WA) { + phy->flags ^= FLAGS_DUMMY_READ; + if (phy->flags & FLAGS_DUMMY_READ) { + u16 temp_val; + bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); + } + } + + return rc; +} + - /* Restore the saved mode */ - REG_WR(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode); +/******************************************************************/ +/* BSC access functions from E3 */ +/******************************************************************/ +static void bnx2x_bsc_module_sel(struct link_params *params) +{ + int idx; + u32 board_cfg, sfp_ctrl; + u32 i2c_pins[I2C_SWITCH_WIDTH], i2c_val[I2C_SWITCH_WIDTH]; + struct bnx2x *bp = params->bp; + u8 port = params->port; + /* Read I2C output PINs */ + board_cfg = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.shared_hw_config.board)); + i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK; + i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >> + SHARED_HW_CFG_E3_I2C_MUX1_SHIFT; + + /* Read I2C output value */ + sfp_ctrl = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)); + i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0; + i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0; + DP(NETIF_MSG_LINK, "Setting BSC switch\n"); + for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++) + bnx2x_set_cfg_pin(bp, i2c_pins[idx], i2c_val[idx]); +} + +static int bnx2x_bsc_read(struct link_params *params, + struct bnx2x_phy *phy, + u8 sl_devid, + u16 sl_addr, + u8 lc_addr, + u8 xfer_cnt, + u32 *data_array) +{ + u32 val, i; + int rc = 0; + struct bnx2x *bp = params->bp; + + if ((sl_devid != 0xa0) && (sl_devid != 0xa2)) { + DP(NETIF_MSG_LINK, "invalid sl_devid 0x%x\n", sl_devid); + return -EINVAL; + } + + if (xfer_cnt > 16) { + DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", + xfer_cnt); + return -EINVAL; + } + bnx2x_bsc_module_sel(params); + + xfer_cnt = 16 - lc_addr; + + /* enable the engine */ + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + val |= MCPR_IMC_COMMAND_ENABLE; + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* program slave device ID */ + val = (sl_devid << 16) | sl_addr; + REG_WR(bp, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val); + + /* start xfer with 0 byte to update the address pointer ???*/ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_WRITE_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0); + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* poll for completion */ + i = 0; + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + udelay(10); + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + DP(NETIF_MSG_LINK, "wr 0 byte timed out after %d try\n", + i); + rc = -EFAULT; + break; + } + } + if (rc == -EFAULT) + return rc; + + /* start xfer with read op */ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_READ_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | + (xfer_cnt); + REG_WR(bp, MCP_REG_MCPR_IMC_COMMAND, val); + + /* poll for completion */ + i = 0; + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + udelay(10); + val = REG_RD(bp, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + DP(NETIF_MSG_LINK, "rd op timed out after %d try\n", i); + rc = -EFAULT; + break; + } + } + if (rc == -EFAULT) + return rc; + for (i = (lc_addr >> 2); i < 4; i++) { + data_array[i] = REG_RD(bp, (MCP_REG_MCPR_IMC_DATAREG0 + i*4)); +#ifdef __BIG_ENDIAN + data_array[i] = ((data_array[i] & 0x000000ff) << 24) | + ((data_array[i] & 0x0000ff00) << 8) | + ((data_array[i] & 0x00ff0000) >> 8) | + ((data_array[i] & 0xff000000) >> 24); +#endif + } return rc; } -u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 *ret_val) +static void bnx2x_cl45_read_or_write(struct bnx2x *bp, struct bnx2x_phy *phy, + u8 devad, u16 reg, u16 or_val) +{ + u16 val; + bnx2x_cl45_read(bp, phy, devad, reg, &val); + bnx2x_cl45_write(bp, phy, devad, reg, val | or_val); +} + +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val) { u8 phy_index; /* @@ -1510,8 +3218,8 @@ u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr, return -EINVAL; } -u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 val) +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val) { u8 phy_index; /* @@ -1527,9 +3235,62 @@ u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr, } return -EINVAL; } +static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy, + struct link_params *params) +{ + u8 lane = 0; + struct bnx2x *bp = params->bp; + u32 path_swap, path_swap_ovr; + u8 path, port; + + path = BP_PATH(bp); + port = params->port; + + if (bnx2x_is_4_port_mode(bp)) { + u32 port_swap, port_swap_ovr; + + /*figure out path swap value */ + path_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) + path_swap = (path_swap_ovr & 0x2); + else + path_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP); + + if (path_swap) + path = path ^ 1; -static void bnx2x_set_aer_mmd_xgxs(struct link_params *params, - struct bnx2x_phy *phy) + /*figure out port swap value */ + port_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR); + if (port_swap_ovr & 0x1) + port_swap = (port_swap_ovr & 0x2); + else + port_swap = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP); + + if (port_swap) + port = port ^ 1; + + lane = (port<<1) + path; + } else { /* two port mode - no port swap */ + + /*figure out path swap value */ + path_swap_ovr = + REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) { + path_swap = (path_swap_ovr & 0x2); + } else { + path_swap = + REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP); + } + if (path_swap) + path = path ^ 1; + + lane = path << 1 ; + } + return lane; +} + +static void bnx2x_set_aer_mmd(struct link_params *params, + struct bnx2x_phy *phy) { u32 ser_lane; u16 offset, aer_val; @@ -1538,20 +3299,28 @@ static void bnx2x_set_aer_mmd_xgxs(struct link_params *params, PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - offset = phy->addr + ser_lane; - if (CHIP_IS_E2(bp)) + offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ? + (phy->addr + ser_lane) : 0; + + if (USES_WARPCORE(bp)) { + aer_val = bnx2x_get_warpcore_lane(phy, params); + /* + * In Dual-lane mode, two lanes are joined together, + * so in order to configure them, the AER broadcast method is + * used here. + * 0x200 is the broadcast address for lanes 0,1 + * 0x201 is the broadcast address for lanes 2,3 + */ + if (phy->flags & FLAGS_WC_DUAL_MODE) + aer_val = (aer_val >> 1) | 0x200; + } else if (CHIP_IS_E2(bp)) aer_val = 0x3800 + offset - 1; else aer_val = 0x3800 + offset; + DP(NETIF_MSG_LINK, "Set AER to 0x%x\n", aer_val); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, aer_val); -} -static void bnx2x_set_aer_mmd_serdes(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - CL22_WR_OVER_CL45(bp, phy, - MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0x3800); + } /******************************************************************/ @@ -1611,20 +3380,979 @@ static void bnx2x_xgxs_deassert(struct link_params *params) params->phy[INT_PHY].def_md_devad); } +static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, + struct link_params *params, u16 *ieee_fc) +{ + struct bnx2x *bp = params->bp; + *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + /** + * resolve pause mode and advertisement Please refer to Table + * 28B-3 of the 802.3ab-1999 spec + */ + + switch (phy->req_flow_ctrl) { + case BNX2X_FLOW_CTRL_AUTO: + if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + else + *ieee_fc |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + + case BNX2X_FLOW_CTRL_TX: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + + case BNX2X_FLOW_CTRL_RX: + case BNX2X_FLOW_CTRL_BOTH: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + break; + + case BNX2X_FLOW_CTRL_NONE: + default: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + break; + } + DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc); +} + +static void set_phy_vars(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 actual_phy_idx, phy_index, link_cfg_idx; + u8 phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + for (phy_index = INT_PHY; phy_index < params->num_phys; + phy_index++) { + link_cfg_idx = LINK_CONFIG_IDX(phy_index); + actual_phy_idx = phy_index; + if (phy_config_swapped) { + if (phy_index == EXT_PHY1) + actual_phy_idx = EXT_PHY2; + else if (phy_index == EXT_PHY2) + actual_phy_idx = EXT_PHY1; + } + params->phy[actual_phy_idx].req_flow_ctrl = + params->req_flow_ctrl[link_cfg_idx]; + + params->phy[actual_phy_idx].req_line_speed = + params->req_line_speed[link_cfg_idx]; + + params->phy[actual_phy_idx].speed_cap_mask = + params->speed_cap_mask[link_cfg_idx]; + + params->phy[actual_phy_idx].req_duplex = + params->req_duplex[link_cfg_idx]; + + if (params->req_line_speed[link_cfg_idx] == + SPEED_AUTO_NEG) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; + + DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," + " speed_cap_mask %x\n", + params->phy[actual_phy_idx].req_flow_ctrl, + params->phy[actual_phy_idx].req_line_speed, + params->phy[actual_phy_idx].speed_cap_mask); + } +} + +static void bnx2x_ext_phy_set_pause(struct link_params *params, + struct bnx2x_phy *phy, + struct link_vars *vars) +{ + u16 val; + struct bnx2x *bp = params->bp; + /* read modify write pause advertizing */ + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); + + val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; + + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + } + DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); +} + +static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) +{ /* LD LP */ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; + break; + + default: + break; + } + if (pause_result & (1<<0)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE; + if (pause_result & (1<<1)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE; +} + +static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + u16 pause_result; + u8 ret = 0; + /* read twice */ + + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + + if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) + vars->flow_ctrl = phy->req_flow_ctrl; + else if (phy->req_line_speed != SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + ret = 1; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) { + bnx2x_cl22_read(bp, phy, + 0x4, &ld_pause); + bnx2x_cl22_read(bp, phy, + 0x5, &lp_pause); + } else { + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } + pause_result = (ld_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", + pause_result); + bnx2x_pause_resolve(vars, pause_result); + } + return ret; +} +/******************************************************************/ +/* Warpcore section */ +/******************************************************************/ +/* The init_internal_warpcore should mirror the xgxs, + * i.e. reset the lane (if needed), set aer for the + * init configuration, and set/clear SGMII flag. Internal + * phy init is done purely in phy_init stage. + */ +static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { + u16 val16 = 0, lane, bam37 = 0; + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); + /* Check adding advertisement for 1G KX */ + if (((vars->line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (vars->line_speed == SPEED_1000)) { + u16 sd_digital; + val16 |= (1<<5); + + /* Enable CL37 1G Parallel Detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &sd_digital); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (sd_digital | 0x1)); + + DP(NETIF_MSG_LINK, "Advertize 1G\n"); + } + if (((vars->line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (vars->line_speed == SPEED_10000)) { + /* Check adding advertisement for 10G KR */ + val16 |= (1<<7); + /* Enable 10G Parallel Detect */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 1); + + DP(NETIF_MSG_LINK, "Advertize 10G\n"); + } + + /* Set Transmit PMD settings */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | + (0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, + 0x03f0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, + 0x03f0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, + 0x383f); + + /* Advertised speeds */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + + /* Enable CL37 BAM */ + if (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, &bam37); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, bam37 | 1); + DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n"); + } + + /* Advertise pause */ + bnx2x_ext_phy_set_pause(params, phy, vars); + + /* Enable Autoneg */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1000); + + /* Over 1G - AN local device user page 1 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_UP1, 0x1f); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC7, &val16); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC7, val16 | 0x100); +} + +static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val; + + /* Disable Autoneg */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7); + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0x3f00); + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0); + + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_UP1, 0x1); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC7, 0xa); + + /* Disable CL36 PCS Tx */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0); + + /* Double Wide Single Data Rate @ pll rate */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF); + + /* Leave cl72 training enable, needed for KR */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, + 0x2); + + /* Leave CL72 enabled */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, + &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, + val | 0x3800); + + /* Set speed via PMA/PMD register */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); + + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB); + + /*Enable encoded forced speed */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30); + + /* Turn TX scramble payload only the 64/66 scrambler */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX66_CONTROL, 0x9); + + /* Turn RX scramble payload only the 64/66 scrambler */ + bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, 0xF9); + + /* set and clear loopback to cause a reset to 64/66 decoder */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x4000); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); + +} + +static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, + struct link_params *params, + u8 is_xfi) +{ + struct bnx2x *bp = params->bp; + u16 misc1_val, tap_val, tx_driver_val, lane, val; + /* Hold rxSeqStart */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val | 0x8000)); + + /* Hold tx_fifo_reset */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, (val | 0x1)); + + /* Disable CL73 AN */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); + + /* Disable 100FX Enable and Auto-Detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL1, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL1, (val & 0xFFFA)); + + /* Disable 100FX Idle detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL3, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL3, (val | 0x0080)); + + /* Set Block address to Remote PHY & Clear forced_speed[5] */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, (val & 0xFF7F)); + + /* Turn off auto-detect & fiber mode */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + (val & 0xFFEE)); + + /* Set filter_force_link, disable_false_link and parallel_detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + ((val | 0x0006) & 0xFFFE)); + + /* Set XFI / SFI */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, &misc1_val); + + misc1_val &= ~(0x1f); + + if (is_xfi) { + misc1_val |= 0x5; + tap_val = ((0x08 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | + (0x37 << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | + (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); + tx_driver_val = + ((0x00 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | + (0x03 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); + + } else { + misc1_val |= 0x9; + tap_val = ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | + (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | + (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); + tx_driver_val = + ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | + (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); + } + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); + + /* Set Transmit PMD settings */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + tx_driver_val); + + /* Enable fiber mode, enable and invert sig_det */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, val | 0xd); + + /* Set Block address to Remote PHY & Set forced_speed[5], 40bit mode */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, val | 0x8080); + + /* 10G XFI Full Duplex */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x100); + + /* Release tx_fifo_reset */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, val & 0xFFFE); + + /* Release rxSeqStart */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, &val); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val & 0x7FFF)); +} + +static void bnx2x_warpcore_set_20G_KR2(struct bnx2x *bp, + struct bnx2x_phy *phy) +{ + DP(NETIF_MSG_LINK, "KR2 still not supported !!!\n"); +} + +static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 lane) +{ + /* Rx0 anaRxControl1G */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_ANARXCONTROL1G, 0x90); + + /* Rx2 anaRxControl1G */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW0, 0xE070); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW1, 0xC0D0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW2, 0xA0B0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW3, 0x8090); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW1_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW2_MASK, 0xF0F0); + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW3_MASK, 0xF0F0); + + /* Serdes Digital Misc1 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6008); + + /* Serdes Digital4 Misc3 */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8088); + + /* Set Transmit PMD settings */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | + (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | + (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET) | + MDIO_WC_REG_TX_FIR_TAP_ENABLE)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | + (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); +} + +static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy, + struct link_params *params, + u8 fiber_mode) +{ + struct bnx2x *bp = params->bp; + u16 val16, digctrl_kx1, digctrl_kx2; + u8 lane; + + lane = bnx2x_get_warpcore_lane(phy, params); + + /* Clear XFI clock comp in non-10G single lane mode. */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, val16 & ~(3<<13)); + + if (phy->req_line_speed == SPEED_AUTO_NEG) { + /* SGMII Autoneg */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, + val16 | 0x1000); + DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n"); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + val16 &= 0xcfbf; + switch (phy->req_line_speed) { + case SPEED_10: + break; + case SPEED_100: + val16 |= 0x2000; + break; + case SPEED_1000: + val16 |= 0x0040; + break; + default: + DP(NETIF_MSG_LINK, "Speed not supported: 0x%x" + "\n", phy->req_line_speed); + return; + } + + if (phy->req_duplex == DUPLEX_FULL) + val16 |= 0x0100; + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16); + + DP(NETIF_MSG_LINK, "set SGMII force speed %d\n", + phy->req_line_speed); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + DP(NETIF_MSG_LINK, " (readback) %x\n", val16); + } + + /* SGMII Slave mode and disable signal detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &digctrl_kx1); + if (fiber_mode) + digctrl_kx1 = 1; + else + digctrl_kx1 &= 0xff4a; + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + digctrl_kx1); + + /* Turn off parallel detect */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 & ~(1<<2))); + + /* Re-enable parallel detect */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 | (1<<2))); + + /* Enable autodet */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + (digctrl_kx1 | 0x10)); +} + +static void bnx2x_warpcore_reset_lane(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 reset) +{ + u16 val; + /* Take lane out of reset after configuration is finished */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); + if (reset) + val |= 0xC000; + else + val &= 0x3FFF; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, val); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); +} + + + /* Clear SFI/XFI link settings registers */ +static void bnx2x_warpcore_clear_regs(struct bnx2x_phy *phy, + struct link_params *params, + u16 lane) +{ + struct bnx2x *bp = params->bp; + u16 val16; + + /* Set XFI clock comp as default. */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, val16 | (3<<13)); + + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL1, 0x014a); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL3, 0x0800); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8008); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x0195); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x0007); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, 0x0002); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000); + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, 0x0990); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x0140); + bnx2x_warpcore_reset_lane(bp, phy, 0); +} + +static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp, + u32 chip_id, + u32 shmem_base, u8 port, + u8 *gpio_num, u8 *gpio_port) +{ + u32 cfg_pin; + *gpio_num = 0; + *gpio_port = 0; + if (CHIP_IS_E3(bp)) { + cfg_pin = (REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_MOD_ABS_MASK) >> + PORT_HW_CFG_E3_MOD_ABS_SHIFT; + + /* + * Should not happen. This function called upon interrupt + * triggered by GPIO ( since EPIO can only generate interrupts + * to MCP). + * So if this function was called and none of the GPIOs was set, + * it means the shit hit the fan. + */ + if ((cfg_pin < PIN_CFG_GPIO0_P0) || + (cfg_pin > PIN_CFG_GPIO3_P1)) { + DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for " + "module detect indication\n", + cfg_pin); + return -EINVAL; + } + + *gpio_num = (cfg_pin - PIN_CFG_GPIO0_P0) & 0x3; + *gpio_port = (cfg_pin - PIN_CFG_GPIO0_P0) >> 2; + } else { + *gpio_num = MISC_REGISTERS_GPIO_3; + *gpio_port = port; + } + DP(NETIF_MSG_LINK, "MOD_ABS int GPIO%d_P%d\n", *gpio_num, *gpio_port); + return 0; +} + +static int bnx2x_is_sfp_module_plugged(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 gpio_num, gpio_port; + u32 gpio_val; + if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, + params->shmem_base, params->port, + &gpio_num, &gpio_port) != 0) + return 0; + gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); + + /* Call the handling function in case module is detected */ + if (gpio_val == 0) + return 1; + else + return 0; +} + +static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 serdes_net_if; + u8 fiber_mode; + u16 lane = bnx2x_get_warpcore_lane(phy, params); + serdes_net_if = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + DP(NETIF_MSG_LINK, "Begin Warpcore init, link_speed %d, " + "serdes_net_if = 0x%x\n", + vars->line_speed, serdes_net_if); + bnx2x_set_aer_mmd(params, phy); + + vars->phy_flags |= PHY_XGXS_FLAG; + if ((serdes_net_if == PORT_HW_CFG_NET_SERDES_IF_SGMII) || + (phy->req_line_speed && + ((phy->req_line_speed == SPEED_100) || + (phy->req_line_speed == SPEED_10)))) { + vars->phy_flags |= PHY_SGMII_FLAG; + DP(NETIF_MSG_LINK, "Setting SGMII mode\n"); + bnx2x_warpcore_clear_regs(phy, params, lane); + bnx2x_warpcore_set_sgmii_speed(phy, params, 0); + } else { + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_KR: + /* Enable KR Auto Neg */ + if (params->loopback_mode == LOOPBACK_NONE) + bnx2x_warpcore_enable_AN_KR(phy, params, vars); + else { + DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n"); + bnx2x_warpcore_set_10G_KR(phy, params, vars); + } + break; + + case PORT_HW_CFG_NET_SERDES_IF_XFI: + bnx2x_warpcore_clear_regs(phy, params, lane); + if (vars->line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, "Setting 10G XFI\n"); + bnx2x_warpcore_set_10G_XFI(phy, params, 1); + } else { + if (SINGLE_MEDIA_DIRECT(params)) { + DP(NETIF_MSG_LINK, "1G Fiber\n"); + fiber_mode = 1; + } else { + DP(NETIF_MSG_LINK, "10/100/1G SGMII\n"); + fiber_mode = 0; + } + bnx2x_warpcore_set_sgmii_speed(phy, + params, + fiber_mode); + } + + break; + + case PORT_HW_CFG_NET_SERDES_IF_SFI: + + bnx2x_warpcore_clear_regs(phy, params, lane); + if (vars->line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, "Setting 10G SFI\n"); + bnx2x_warpcore_set_10G_XFI(phy, params, 0); + } else if (vars->line_speed == SPEED_1000) { + DP(NETIF_MSG_LINK, "Setting 1G Fiber\n"); + bnx2x_warpcore_set_sgmii_speed(phy, params, 1); + } + /* Issue Module detection */ + if (bnx2x_is_sfp_module_plugged(phy, params)) + bnx2x_sfp_module_detection(phy, params); + break; + + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + if (vars->line_speed != SPEED_20000) { + DP(NETIF_MSG_LINK, "Speed not supported yet\n"); + return; + } + DP(NETIF_MSG_LINK, "Setting 20G DXGXS\n"); + bnx2x_warpcore_set_20G_DXGXS(bp, phy, lane); + /* Issue Module detection */ + + bnx2x_sfp_module_detection(phy, params); + break; + + case PORT_HW_CFG_NET_SERDES_IF_KR2: + if (vars->line_speed != SPEED_20000) { + DP(NETIF_MSG_LINK, "Speed not supported yet\n"); + return; + } + DP(NETIF_MSG_LINK, "Setting 20G KR2\n"); + bnx2x_warpcore_set_20G_KR2(bp, phy); + break; + + default: + DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface " + "0x%x\n", serdes_net_if); + return; + } + } + + /* Take lane out of reset after configuration is finished */ + bnx2x_warpcore_reset_lane(bp, phy, 0); + DP(NETIF_MSG_LINK, "Exit config init\n"); +} + +static void bnx2x_sfp_e3_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port = params->port; + + cfg_pin = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_TX_LASER_MASK; + /* Set the !tx_en since this pin is DISABLE_TX_LASER */ + DP(NETIF_MSG_LINK, "Setting WC TX to %d\n", tx_en); + /* For 20G, the expected pin to be used is 3 pins after the current */ + + bnx2x_set_cfg_pin(bp, cfg_pin, tx_en ^ 1); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) + bnx2x_set_cfg_pin(bp, cfg_pin + 3, tx_en ^ 1); +} + +static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val16; + bnx2x_sfp_e3_set_transmitter(params, phy, 0); + bnx2x_set_mdio_clk(bp, params->chip_id, params->port); + bnx2x_set_aer_mmd(params, phy); + /* Global register */ + bnx2x_warpcore_reset_lane(bp, phy, 1); + + /* Clear loopback settings (if any) */ + /* 10G & 20G */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 & + 0xBFFF); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, val16 & 0xfffe); + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + val16 & ~0x10); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, + val16 & 0xff00); + +} + +static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val16; + u32 lane; + DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n", + params->loopback_mode, phy->req_line_speed); + + if (phy->req_line_speed < SPEED_10000) { + /* 10/100/1000 */ + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + val16 | 0x10); + /* Set 1G loopback based on lane (1-copy) */ + lane = bnx2x_get_warpcore_lane(phy, params); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, + val16 | (1<<lane)); + + /* Switch back to 4-copy registers */ + bnx2x_set_aer_mmd(params, phy); + /* Global loopback, not recommended. */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 | + 0x4000); + } else { + /* 10G & 20G */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16 | + 0x4000); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, &val16); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, val16 | 0x1); + } +} + void bnx2x_link_status_update(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u8 link_10g; + u8 link_10g_plus; u8 port = params->port; + u32 sync_offset, media_types; + /* Update PHY configuration */ + set_phy_vars(params, vars); vars->link_status = REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, port_mb[port].link_status)); vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); - + vars->phy_flags = PHY_XGXS_FLAG; if (vars->link_up) { DP(NETIF_MSG_LINK, "phy link up\n"); @@ -1664,27 +4392,9 @@ void bnx2x_link_status_update(struct link_params *params, case LINK_10GTFD: vars->line_speed = SPEED_10000; break; - - case LINK_12GTFD: - vars->line_speed = SPEED_12000; - break; - - case LINK_12_5GTFD: - vars->line_speed = SPEED_12500; - break; - - case LINK_13GTFD: - vars->line_speed = SPEED_13000; + case LINK_20GTFD: + vars->line_speed = SPEED_20000; break; - - case LINK_15GTFD: - vars->line_speed = SPEED_15000; - break; - - case LINK_16GTFD: - vars->line_speed = SPEED_16000; - break; - default: break; } @@ -1705,19 +4415,24 @@ void bnx2x_link_status_update(struct link_params *params, } else { vars->phy_flags &= ~PHY_SGMII_FLAG; } - + if (vars->line_speed && + USES_WARPCORE(bp) && + (vars->line_speed == SPEED_1000)) + vars->phy_flags |= PHY_SGMII_FLAG; /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); - if (link_10g) - vars->mac_type = MAC_TYPE_BMAC; - else - vars->mac_type = MAC_TYPE_EMAC; + link_10g_plus = (vars->line_speed >= SPEED_10000); + if (link_10g_plus) { + if (USES_WARPCORE(bp)) + vars->mac_type = MAC_TYPE_XMAC; + else + vars->mac_type = MAC_TYPE_BMAC; + } else { + if (USES_WARPCORE(bp)) + vars->mac_type = MAC_TYPE_UMAC; + else + vars->mac_type = MAC_TYPE_EMAC; + } } else { /* link down */ DP(NETIF_MSG_LINK, "phy link down\n"); @@ -1731,8 +4446,40 @@ void bnx2x_link_status_update(struct link_params *params, vars->mac_type = MAC_TYPE_NONE; } - DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n", - vars->link_status, vars->phy_link_up); + /* Sync media type */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].media_type); + media_types = REG_RD(bp, sync_offset); + + params->phy[INT_PHY].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT; + params->phy[EXT_PHY1].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT; + params->phy[EXT_PHY2].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT; + DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types); + + /* Sync AEU offset */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + + vars->aeu_int_mask = REG_RD(bp, sync_offset); + + /* Sync PFC status */ + if (vars->link_status & LINK_STATUS_PFC_ENABLED) + params->feature_config_flags |= + FEATURE_CONFIG_PFC_ENABLED; + else + params->feature_config_flags &= + ~FEATURE_CONFIG_PFC_ENABLED; + + DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n", + vars->link_status, vars->phy_link_up, vars->aeu_int_mask); DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n", vars->line_speed, vars->duplex, vars->flow_ctrl); } @@ -1759,9 +4506,9 @@ static void bnx2x_set_master_ln(struct link_params *params, (new_master_ln | ser_lane)); } -static u8 bnx2x_reset_unicore(struct link_params *params, - struct bnx2x_phy *phy, - u8 set_serdes) +static int bnx2x_reset_unicore(struct link_params *params, + struct bnx2x_phy *phy, + u8 set_serdes) { struct bnx2x *bp = params->bp; u16 mii_control; @@ -2048,9 +4795,6 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy, if (vars->line_speed == SPEED_10000) reg_val |= MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; - if (vars->line_speed == SPEED_13000) - reg_val |= - MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G; } CL22_WR_OVER_CL45(bp, phy, @@ -2059,8 +4803,8 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy, } -static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy, - struct link_params *params) +static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; u16 val = 0; @@ -2081,44 +4825,9 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy, MDIO_OVER_1G_UP3, 0x400); } -static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, - struct link_params *params, u16 *ieee_fc) -{ - struct bnx2x *bp = params->bp; - *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; - /* - * Resolve pause mode and advertisement. - * Please refer to Table 28B-3 of the 802.3ab-1999 spec - */ - - switch (phy->req_flow_ctrl) { - case BNX2X_FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - else - *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - case BNX2X_FLOW_CTRL_TX: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - - case BNX2X_FLOW_CTRL_RX: - case BNX2X_FLOW_CTRL_BOTH: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - - case BNX2X_FLOW_CTRL_NONE: - default: - *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; - } - DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc); -} - -static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x_phy *phy, - struct link_params *params, - u16 ieee_fc) +static void bnx2x_set_ieee_aneg_advertisement(struct bnx2x_phy *phy, + struct link_params *params, + u16 ieee_fc) { struct bnx2x *bp = params->bp; u16 val; @@ -2252,35 +4961,8 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy, * link management */ -static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) -{ /* LD LP */ - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; - break; - - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; - break; - - default: - break; - } - if (pause_result & (1<<0)) - vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE; - if (pause_result & (1<<1)) - vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE; -} - -static u8 bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, - struct link_params *params) +static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; u16 pd_10g, status2_1000x; @@ -2383,7 +5065,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u16 rx_status, ustat_val, cl37_fsm_recieved; + u16 rx_status, ustat_val, cl37_fsm_received; DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n"); /* Step 1: Make sure signal is detected */ CL22_RD_OVER_CL45(bp, phy, @@ -2421,15 +5103,15 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy, CL22_RD_OVER_CL45(bp, phy, MDIO_REG_BANK_REMOTE_PHY, MDIO_REMOTE_PHY_MISC_RX_STATUS, - &cl37_fsm_recieved); - if ((cl37_fsm_recieved & + &cl37_fsm_received); + if ((cl37_fsm_received & (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { DP(NETIF_MSG_LINK, "No CL37 FSM were received. " "misc_rx_status(0x8330) = 0x%x\n", - cl37_fsm_recieved); + cl37_fsm_received); return; } /* @@ -2462,45 +5144,25 @@ static void bnx2x_xgxs_an_resolve(struct bnx2x_phy *phy, vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; } - -static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, +static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, struct link_params *params, - struct link_vars *vars) + struct link_vars *vars, + u16 is_link_up, + u16 speed_mask, + u16 is_duplex) { struct bnx2x *bp = params->bp; - u16 new_line_speed, gp_status; - u8 rc = 0; - - /* Read gp_status */ - CL22_RD_OVER_CL45(bp, phy, - MDIO_REG_BANK_GP_STATUS, - MDIO_GP_STATUS_TOP_AN_STATUS1, - &gp_status); - if (phy->req_line_speed == SPEED_AUTO_NEG) vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "phy link up gp_status=0x%x\n", - gp_status); + if (is_link_up) { + DP(NETIF_MSG_LINK, "phy link up\n"); vars->phy_link_up = 1; vars->link_status |= LINK_STATUS_LINK_UP; - if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) - vars->duplex = DUPLEX_FULL; - else - vars->duplex = DUPLEX_HALF; - - if (SINGLE_MEDIA_DIRECT(params)) { - bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); - if (phy->req_line_speed == SPEED_AUTO_NEG) - bnx2x_xgxs_an_resolve(phy, params, vars, - gp_status); - } - - switch (gp_status & GP_STATUS_SPEED_MASK) { + switch (speed_mask) { case GP_STATUS_10M: - new_line_speed = SPEED_10; + vars->line_speed = SPEED_10; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else @@ -2508,7 +5170,7 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, break; case GP_STATUS_100M: - new_line_speed = SPEED_100; + vars->line_speed = SPEED_100; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else @@ -2517,7 +5179,7 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, case GP_STATUS_1G: case GP_STATUS_1G_KX: - new_line_speed = SPEED_1000; + vars->line_speed = SPEED_1000; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else @@ -2525,7 +5187,7 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, break; case GP_STATUS_2_5G: - new_line_speed = SPEED_2500; + vars->line_speed = SPEED_2500; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else @@ -2536,50 +5198,28 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, case GP_STATUS_6G: DP(NETIF_MSG_LINK, "link speed unsupported gp_status 0x%x\n", - gp_status); + speed_mask); return -EINVAL; case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: - new_line_speed = SPEED_10000; + case GP_STATUS_10G_KR: + case GP_STATUS_10G_SFI: + case GP_STATUS_10G_XFI: + vars->line_speed = SPEED_10000; vars->link_status |= LINK_10GTFD; break; - - case GP_STATUS_12G_HIG: - new_line_speed = SPEED_12000; - vars->link_status |= LINK_12GTFD; - break; - - case GP_STATUS_12_5G: - new_line_speed = SPEED_12500; - vars->link_status |= LINK_12_5GTFD; - break; - - case GP_STATUS_13G: - new_line_speed = SPEED_13000; - vars->link_status |= LINK_13GTFD; + case GP_STATUS_20G_DXGXS: + vars->line_speed = SPEED_20000; + vars->link_status |= LINK_20GTFD; break; - - case GP_STATUS_15G: - new_line_speed = SPEED_15000; - vars->link_status |= LINK_15GTFD; - break; - - case GP_STATUS_16G: - new_line_speed = SPEED_16000; - vars->link_status |= LINK_16GTFD; - break; - default: DP(NETIF_MSG_LINK, "link speed unsupported gp_status 0x%x\n", - gp_status); + speed_mask); return -EINVAL; } - - vars->line_speed = new_line_speed; - } else { /* link_down */ DP(NETIF_MSG_LINK, "phy link down\n"); @@ -2588,7 +5228,47 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, vars->duplex = DUPLEX_FULL; vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; + } + DP(NETIF_MSG_LINK, " phy_link_up %x line_speed %d\n", + vars->phy_link_up, vars->line_speed); + return 0; +} + +static int bnx2x_link_settings_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + + struct bnx2x *bp = params->bp; + + u16 gp_status, duplex = DUPLEX_HALF, link_up = 0, speed_mask; + int rc = 0; + /* Read gp_status */ + CL22_RD_OVER_CL45(bp, phy, + MDIO_REG_BANK_GP_STATUS, + MDIO_GP_STATUS_TOP_AN_STATUS1, + &gp_status); + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) + duplex = DUPLEX_FULL; + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) + link_up = 1; + speed_mask = gp_status & GP_STATUS_SPEED_MASK; + DP(NETIF_MSG_LINK, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x\n", + gp_status, link_up, speed_mask); + rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, speed_mask, + duplex); + if (rc == -EINVAL) + return rc; + + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { + if (SINGLE_MEDIA_DIRECT(params)) { + bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); + if (phy->req_line_speed == SPEED_AUTO_NEG) + bnx2x_xgxs_an_resolve(phy, params, vars, + gp_status); + } + } else { /* link_down */ if ((phy->req_line_speed == SPEED_AUTO_NEG) && SINGLE_MEDIA_DIRECT(params)) { /* Check signal is detected */ @@ -2596,13 +5276,86 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy, } } - DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x\n", - gp_status, vars->phy_link_up, vars->line_speed); DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; } +static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + + struct bnx2x *bp = params->bp; + + u8 lane; + u16 gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL; + int rc = 0; + lane = bnx2x_get_warpcore_lane(phy, params); + /* Read gp_status */ + if (phy->req_line_speed > SPEED_10000) { + u16 temp_link_up; + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + 1, &temp_link_up); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + 1, &link_up); + DP(NETIF_MSG_LINK, "PCS RX link status = 0x%x-->0x%x\n", + temp_link_up, link_up); + link_up &= (1<<2); + if (link_up) + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1); + DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1); + /* Check for either KR or generic link up. */ + gp_status1 = ((gp_status1 >> 8) & 0xf) | + ((gp_status1 >> 12) & 0xf); + link_up = gp_status1 & (1 << lane); + if (link_up && SINGLE_MEDIA_DIRECT(params)) { + u16 pd, gp_status4; + if (phy->req_line_speed == SPEED_AUTO_NEG) { + /* Check Autoneg complete */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status4); + if (gp_status4 & ((1<<12)<<lane)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + + /* Check parallel detect used */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_PAR_DET_10G_STATUS, + &pd); + if (pd & (1<<15)) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + } + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } + } + + if (lane < 2) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed); + } else { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed); + } + DP(NETIF_MSG_LINK, "lane %d gp_speed 0x%x\n", lane, gp_speed); + + if ((lane & 1) == 0) + gp_speed <<= 8; + gp_speed &= 0x3f00; + + + rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, + duplex); + + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", + vars->duplex, vars->flow_ctrl, vars->link_status); + return rc; +} static void bnx2x_set_gmii_tx_driver(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -2642,8 +5395,8 @@ static void bnx2x_set_gmii_tx_driver(struct link_params *params) } } -static u8 bnx2x_emac_program(struct link_params *params, - struct link_vars *vars) +static int bnx2x_emac_program(struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 port = params->port; @@ -2713,9 +5466,9 @@ static void bnx2x_set_preemphasis(struct bnx2x_phy *phy, } } -static void bnx2x_init_internal_phy(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static void bnx2x_xgxs_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 enable_cl73 = (SINGLE_MEDIA_DIRECT(params) || @@ -2742,11 +5495,11 @@ static void bnx2x_init_internal_phy(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "not SGMII, AN\n"); /* AN enabled */ - bnx2x_set_brcm_cl37_advertisment(phy, params); + bnx2x_set_brcm_cl37_advertisement(phy, params); /* program duplex & pause advertisement (for aneg) */ - bnx2x_set_ieee_aneg_advertisment(phy, params, - vars->ieee_fc); + bnx2x_set_ieee_aneg_advertisement(phy, params, + vars->ieee_fc); /* enable autoneg */ bnx2x_set_autoneg(phy, params, vars, enable_cl73); @@ -2762,29 +5515,12 @@ static void bnx2x_init_internal_phy(struct bnx2x_phy *phy, } } -static u8 bnx2x_init_serdes(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - u8 rc; - vars->phy_flags |= PHY_SGMII_FLAG; - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - bnx2x_set_aer_mmd_serdes(params->bp, phy); - rc = bnx2x_reset_unicore(params, phy, 1); - /* reset the SerDes and wait for reset bit return low */ - if (rc != 0) - return rc; - bnx2x_set_aer_mmd_serdes(params->bp, phy); - - return rc; -} - -static u8 bnx2x_init_xgxs(struct bnx2x_phy *phy, +static int bnx2x_prepare_xgxs(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u8 rc; - vars->phy_flags = PHY_XGXS_FLAG; + int rc; + vars->phy_flags |= PHY_XGXS_FLAG; if ((phy->req_line_speed && ((phy->req_line_speed == SPEED_100) || (phy->req_line_speed == SPEED_10))) || @@ -2792,26 +5528,28 @@ static u8 bnx2x_init_xgxs(struct bnx2x_phy *phy, (phy->speed_cap_mask >= PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && (phy->speed_cap_mask < - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) - )) + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->type == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD)) vars->phy_flags |= PHY_SGMII_FLAG; else vars->phy_flags &= ~PHY_SGMII_FLAG; bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - bnx2x_set_aer_mmd_xgxs(params, phy); - bnx2x_set_master_ln(params, phy); + bnx2x_set_aer_mmd(params, phy); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + bnx2x_set_master_ln(params, phy); rc = bnx2x_reset_unicore(params, phy, 0); /* reset the SerDes and wait for reset bit return low */ if (rc != 0) return rc; - bnx2x_set_aer_mmd_xgxs(params, phy); - + bnx2x_set_aer_mmd(params, phy); /* setting the masterLn_def again after the reset */ - bnx2x_set_master_ln(params, phy); - bnx2x_set_swap_lanes(params, phy); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { + bnx2x_set_master_ln(params, phy); + bnx2x_set_swap_lanes(params, phy); + } return rc; } @@ -2823,8 +5561,13 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, u16 cnt, ctrl; /* Wait for soft reset to get cleared up to 1 sec */ for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + bnx2x_cl22_read(bp, phy, + MDIO_PMA_REG_CTRL, &ctrl); + else + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, &ctrl); if (!(ctrl & (1<<15))) break; msleep(1); @@ -2845,7 +5588,11 @@ static void bnx2x_link_int_enable(struct link_params *params) struct bnx2x *bp = params->bp; /* Setting the status to report on link up for either XGXS or SerDes */ - if (params->switch_cfg == SWITCH_CFG_10G) { + if (CHIP_IS_E3(bp)) { + mask = NIG_MASK_XGXS0_LINK_STATUS; + if (!(SINGLE_MEDIA_DIRECT(params))) + mask |= NIG_MASK_MI_INT; + } else if (params->switch_cfg == SWITCH_CFG_10G) { mask = (NIG_MASK_XGXS0_LINK10G | NIG_MASK_XGXS0_LINK_STATUS); DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); @@ -2918,11 +5665,11 @@ static void bnx2x_rearm_latch_signal(struct bnx2x *bp, u8 port, } static void bnx2x_link_int_ack(struct link_params *params, - struct link_vars *vars, u8 is_10g) + struct link_vars *vars, u8 is_10g_plus) { struct bnx2x *bp = params->bp; u8 port = params->port; - + u32 mask; /* * First reset all status we assume only one line will be * change at a time @@ -2932,47 +5679,34 @@ static void bnx2x_link_int_ack(struct link_params *params, NIG_STATUS_XGXS0_LINK_STATUS | NIG_STATUS_SERDES0_LINK_STATUS)); if (vars->phy_link_up) { - if (is_10g) { - /* - * Disable the 10G link interrupt by writing 1 to the - * status register - */ - DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_XGXS0_LINK10G); - - } else if (params->switch_cfg == SWITCH_CFG_10G) { - /* - * Disable the link interrupt by writing 1 to the - * relevant lane in the status register - */ - u32 ser_lane = ((params->lane_config & + if (USES_WARPCORE(bp)) + mask = NIG_STATUS_XGXS0_LINK_STATUS; + else { + if (is_10g_plus) + mask = NIG_STATUS_XGXS0_LINK10G; + else if (params->switch_cfg == SWITCH_CFG_10G) { + /* + * Disable the link interrupt by writing 1 to + * the relevant lane in the status register + */ + u32 ser_lane = + ((params->lane_config & PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - - DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n", - vars->line_speed); - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - ((1 << ser_lane) << - NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); - - } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes phy link up\n"); - /* - * Disable the link interrupt by writing 1 to the status - * register - */ - bnx2x_bits_en(bp, - NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_SERDES0_LINK_STATUS); + mask = ((1 << ser_lane) << + NIG_STATUS_XGXS0_LINK_STATUS_SIZE); + } else + mask = NIG_STATUS_SERDES0_LINK_STATUS; } - + DP(NETIF_MSG_LINK, "Ack link up interrupt with mask 0x%x\n", + mask); + bnx2x_bits_en(bp, + NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, + mask); } } -static u8 bnx2x_format_ver(u32 num, u8 *str, u16 *len) +static int bnx2x_format_ver(u32 num, u8 *str, u16 *len) { u8 *str_ptr = str; u32 mask = 0xf0000000; @@ -3011,19 +5745,19 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 *len) } -static u8 bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) +static int bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len) { str[0] = '\0'; (*len)--; return 0; } -u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len) +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, + u8 *version, u16 len) { struct bnx2x *bp; u32 spirom_ver = 0; - u8 status = 0; + int status = 0; u8 *ver_p = version; u16 remain_len = len; if (version == NULL || params == NULL) @@ -3065,15 +5799,18 @@ static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; if (phy->req_line_speed != SPEED_1000) { - u32 md_devad; + u32 md_devad = 0; DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n"); - /* change the uni_phy_addr in the nig */ - md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + - port*0x18)); + if (!CHIP_IS_E3(bp)) { + /* change the uni_phy_addr in the nig */ + md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD + + port*0x18)); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + 0x5); + } bnx2x_cl45_write(bp, phy, 5, @@ -3088,10 +5825,13 @@ static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, 0x6041); msleep(200); /* set aer mmd back */ - bnx2x_set_aer_mmd_xgxs(params, phy); + bnx2x_set_aer_mmd(params, phy); - /* and md_devad */ - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, md_devad); + if (!CHIP_IS_E3(bp)) { + /* and md_devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, + md_devad); + } } else { u16 mii_ctrl; DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n"); @@ -3107,12 +5847,13 @@ static void bnx2x_set_xgxs_loopback(struct bnx2x_phy *phy, } } -u8 bnx2x_set_led(struct link_params *params, - struct link_vars *vars, u8 mode, u32 speed) +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed) { u8 port = params->port; u16 hw_led_mode = params->hw_led_mode; - u8 rc = 0, phy_idx; + int rc = 0; + u8 phy_idx; u32 tmp; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; struct bnx2x *bp = params->bp; @@ -3146,8 +5887,10 @@ u8 bnx2x_set_led(struct link_params *params, if (!vars->link_up) break; case LED_MODE_ON: - if (params->phy[EXT_PHY1].type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 && + if (((params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) || + (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722)) && CHIP_IS_E2(bp) && params->num_phys == 2) { /* * This is a work-around for E2+8727 Configurations @@ -3162,7 +5905,9 @@ u8 bnx2x_set_led(struct link_params *params, (tmp | EMAC_LED_OVERRIDE)); return rc; } - } else if (SINGLE_MEDIA_DIRECT(params)) { + } else if (SINGLE_MEDIA_DIRECT(params) && + (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp))) { /* * This is a work-around for HW issue found when link * is up in CL73 @@ -3214,21 +5959,49 @@ u8 bnx2x_set_led(struct link_params *params, * This function comes to reflect the actual link state read DIRECTLY from the * HW */ -u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars, - u8 is_serdes) +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes) { struct bnx2x *bp = params->bp; u16 gp_status = 0, phy_index = 0; u8 ext_phy_link_up = 0, serdes_phy_type; struct link_vars temp_vars; - - CL22_RD_OVER_CL45(bp, ¶ms->phy[INT_PHY], + struct bnx2x_phy *int_phy = ¶ms->phy[INT_PHY]; + + if (CHIP_IS_E3(bp)) { + u16 link_up; + if (params->req_line_speed[LINK_CONFIG_IDX(INT_PHY)] + > SPEED_10000) { + /* Check 20G link */ + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + 1, &link_up); + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + 1, &link_up); + link_up &= (1<<2); + } else { + /* Check 10G link and below*/ + u8 lane = bnx2x_get_warpcore_lane(int_phy, params); + bnx2x_cl45_read(bp, int_phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, + &gp_status); + gp_status = ((gp_status >> 8) & 0xf) | + ((gp_status >> 12) & 0xf); + link_up = gp_status & (1 << lane); + } + if (!link_up) + return -ESRCH; + } else { + CL22_RD_OVER_CL45(bp, int_phy, MDIO_REG_BANK_GP_STATUS, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); /* link is up only if both local phy and external phy are up */ if (!(gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)) return -ESRCH; + } + /* In XGXS loopback mode, do not check external PHY */ + if (params->loopback_mode == LOOPBACK_XGXS) + return 0; switch (params->num_phys) { case 1: @@ -3245,7 +6018,9 @@ u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars, serdes_phy_type = ((params->phy[phy_index].media_type == ETH_PHY_SFP_FIBER) || (params->phy[phy_index].media_type == - ETH_PHY_XFP_FIBER)); + ETH_PHY_XFP_FIBER) || + (params->phy[phy_index].media_type == + ETH_PHY_DA_TWINAX)); if (is_serdes != serdes_phy_type) continue; @@ -3263,10 +6038,10 @@ u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars, return -ESRCH; } -static u8 bnx2x_link_initialize(struct link_params *params, - struct link_vars *vars) +static int bnx2x_link_initialize(struct link_params *params, + struct link_vars *vars) { - u8 rc = 0; + int rc = 0; u8 phy_index, non_ext_phy; struct bnx2x *bp = params->bp; /* @@ -3282,12 +6057,8 @@ static u8 bnx2x_link_initialize(struct link_params *params, * (no external phys), or this board has external phy which requires * to first. */ - - if (params->phy[INT_PHY].config_init) - params->phy[INT_PHY].config_init( - ¶ms->phy[INT_PHY], - params, vars); - + if (!USES_WARPCORE(bp)) + bnx2x_prepare_xgxs(¶ms->phy[INT_PHY], params, vars); /* init ext phy and enable link state int */ non_ext_phy = (SINGLE_MEDIA_DIRECT(params) || (params->loopback_mode == LOOPBACK_XGXS)); @@ -3296,13 +6067,22 @@ static u8 bnx2x_link_initialize(struct link_params *params, (params->phy[EXT_PHY1].flags & FLAGS_INIT_XGXS_FIRST) || (params->loopback_mode == LOOPBACK_EXT_PHY)) { struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; - if (vars->line_speed == SPEED_AUTO_NEG) + if (vars->line_speed == SPEED_AUTO_NEG && + (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp))) bnx2x_set_parallel_detection(phy, params); - bnx2x_init_internal_phy(phy, params, vars); + if (params->phy[INT_PHY].config_init) + params->phy[INT_PHY].config_init(phy, + params, + vars); } /* Init external phy*/ - if (!non_ext_phy) + if (non_ext_phy) { + if (params->phy[INT_PHY].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + } else { for (phy_index = EXT_PHY1; phy_index < params->num_phys; phy_index++) { /* @@ -3311,17 +6091,22 @@ static u8 bnx2x_link_initialize(struct link_params *params, * need to initialize the first phy, since they are * connected. */ + if (params->phy[phy_index].supported & + SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + if (phy_index == EXT_PHY2 && (bnx2x_phy_selection(params) == PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { - DP(NETIF_MSG_LINK, "Ignoring second phy\n"); + DP(NETIF_MSG_LINK, "Not initializing" + " second phy\n"); continue; } params->phy[phy_index].config_init( ¶ms->phy[phy_index], params, vars); } - + } /* Reset the interrupt indication after phy was initialized */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + params->port*4, @@ -3329,6 +6114,7 @@ static u8 bnx2x_link_initialize(struct link_params *params, NIG_STATUS_XGXS0_LINK_STATUS | NIG_STATUS_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); + bnx2x_update_mng(params, vars->link_status); return rc; } @@ -3359,20 +6145,25 @@ static void bnx2x_common_ext_link_reset(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "reset external PHY\n"); } -static u8 bnx2x_update_link_down(struct link_params *params, - struct link_vars *vars) +static int bnx2x_update_link_down(struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 port = params->port; DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); bnx2x_set_led(params, vars, LED_MODE_OFF, 0); - + vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG; /* indicate no mac active */ vars->mac_type = MAC_TYPE_NONE; /* update shared memory */ - vars->link_status = 0; + vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | + LINK_STATUS_LINK_UP | + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK); vars->line_speed = 0; bnx2x_update_mng(params, vars->link_status); @@ -3380,26 +6171,34 @@ static u8 bnx2x_update_link_down(struct link_params *params, REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); msleep(10); - - /* reset BigMac */ - bnx2x_bmac_rx_disable(bp, params->port); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + /* reset BigMac/Xmac */ + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp)) { + bnx2x_bmac_rx_disable(bp, params->port); + REG_WR(bp, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + } + if (CHIP_IS_E3(bp)) + bnx2x_xmac_disable(params); + return 0; } -static u8 bnx2x_update_link_up(struct link_params *params, - struct link_vars *vars, - u8 link_10g) +static int bnx2x_update_link_up(struct link_params *params, + struct link_vars *vars, + u8 link_10g) { struct bnx2x *bp = params->bp; u8 port = params->port; - u8 rc = 0; + int rc = 0; vars->link_status |= LINK_STATUS_LINK_UP; + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) vars->link_status |= @@ -3408,25 +6207,48 @@ static u8 bnx2x_update_link_up(struct link_params *params, if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; - - if (link_10g) { - bnx2x_bmac_enable(params, vars, 0); + if (USES_WARPCORE(bp)) { + if (link_10g) { + if (bnx2x_xmac_enable(params, vars, 0) == + -ESRCH) { + DP(NETIF_MSG_LINK, "Found errors on XMAC\n"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } + } else + bnx2x_umac_enable(params, vars, 0); bnx2x_set_led(params, vars, - LED_MODE_OPER, SPEED_10000); - } else { - rc = bnx2x_emac_program(params, vars); + LED_MODE_OPER, vars->line_speed); + } + if ((CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp))) { + if (link_10g) { + if (bnx2x_bmac_enable(params, vars, 0) == + -ESRCH) { + DP(NETIF_MSG_LINK, "Found errors on BMAC\n"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } - bnx2x_emac_enable(params, vars, 0); + bnx2x_set_led(params, vars, + LED_MODE_OPER, SPEED_10000); + } else { + rc = bnx2x_emac_program(params, vars); + bnx2x_emac_enable(params, vars, 0); - /* AN complete? */ - if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) - && (!(vars->phy_flags & PHY_SGMII_FLAG)) && - SINGLE_MEDIA_DIRECT(params)) - bnx2x_set_gmii_tx_driver(params); + /* AN complete? */ + if ((vars->link_status & + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) + && (!(vars->phy_flags & PHY_SGMII_FLAG)) && + SINGLE_MEDIA_DIRECT(params)) + bnx2x_set_gmii_tx_driver(params); + } } /* PBF - link up */ - if (!(CHIP_IS_E2(bp))) + if (CHIP_IS_E1x(bp)) rc |= bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); @@ -3451,17 +6273,18 @@ static u8 bnx2x_update_link_up(struct link_params *params, * external phy needs to be up, and at least one of the 2 * external phy link must be up. */ -u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) +int bnx2x_link_update(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; struct link_vars phy_vars[MAX_PHYS]; u8 port = params->port; - u8 link_10g, phy_index; - u8 ext_phy_link_up = 0, cur_link_up, rc = 0; + u8 link_10g_plus, phy_index; + u8 ext_phy_link_up = 0, cur_link_up; + int rc = 0; u8 is_mi_int = 0; u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; u8 active_external_phy = INT_PHY; - vars->link_status = 0; + vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; for (phy_index = INT_PHY; phy_index < params->num_phys; phy_index++) { phy_vars[phy_index].flow_ctrl = 0; @@ -3470,8 +6293,12 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) phy_vars[phy_index].duplex = DUPLEX_FULL; phy_vars[phy_index].phy_link_up = 0; phy_vars[phy_index].link_up = 0; + phy_vars[phy_index].fault_detected = 0; } + if (USES_WARPCORE(bp)) + bnx2x_set_aer_mmd(params, ¶ms->phy[INT_PHY]); + DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n", port, (vars->phy_flags & PHY_XGXS_FLAG), REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); @@ -3488,13 +6315,14 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); /* * Step 1: * Check external link change only for external phys, and apply * priority selection between them in case the link on both phys - * is up. Note that the instead of the common vars, a temporary + * is up. Note that instead of the common vars, a temporary * vars argument is used since each phy may have different link/ * speed/duplex result */ @@ -3601,6 +6429,8 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) if (params->phy[active_external_phy].supported & SUPPORTED_FIBRE) vars->link_status |= LINK_STATUS_SERDES_LINK; + else + vars->link_status &= ~LINK_STATUS_SERDES_LINK; DP(NETIF_MSG_LINK, "Active external phy selected: %x\n", active_external_phy); } @@ -3640,14 +6470,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) } /* anything 10 and over uses the bmac */ - link_10g = ((vars->line_speed == SPEED_10000) || - (vars->line_speed == SPEED_12000) || - (vars->line_speed == SPEED_12500) || - (vars->line_speed == SPEED_13000) || - (vars->line_speed == SPEED_15000) || - (vars->line_speed == SPEED_16000)); + link_10g_plus = (vars->line_speed >= SPEED_10000); - bnx2x_link_int_ack(params, vars, link_10g); + bnx2x_link_int_ack(params, vars, link_10g_plus); /* * In case external phy link is up, and internal link is down @@ -3671,21 +6496,24 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) vars->phy_flags |= PHY_SGMII_FLAG; else vars->phy_flags &= ~PHY_SGMII_FLAG; - bnx2x_init_internal_phy(¶ms->phy[INT_PHY], - params, + + if (params->phy[INT_PHY].config_init) + params->phy[INT_PHY].config_init( + ¶ms->phy[INT_PHY], params, vars); } } /* * Link is up only if both local phy and external phy (in case of - * non-direct board) are up + * non-direct board) are up and no fault detected on active PHY. */ vars->link_up = (vars->phy_link_up && (ext_phy_link_up || - SINGLE_MEDIA_DIRECT(params))); + SINGLE_MEDIA_DIRECT(params)) && + (phy_vars[active_external_phy].fault_detected == 0)); if (vars->link_up) - rc = bnx2x_update_link_up(params, vars, link_10g); + rc = bnx2x_update_link_up(params, vars, link_10g_plus); else rc = bnx2x_update_link_down(params, vars); @@ -3729,69 +6557,6 @@ static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, phy->ver_addr); } -static void bnx2x_ext_phy_set_pause(struct link_params *params, - struct bnx2x_phy *phy, - struct link_vars *vars) -{ - u16 val; - struct bnx2x *bp = params->bp; - /* read modify write pause advertizing */ - bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); - - val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; - - /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ - bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { - val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; - } - if ((vars->ieee_fc & - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { - val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; - } - DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val); - bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); -} - -static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) -{ - struct bnx2x *bp = params->bp; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 pause_result; - u8 ret = 0; - /* read twice */ - - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - - if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) - vars->flow_ctrl = phy->req_flow_ctrl; - else if (phy->req_line_speed != SPEED_AUTO_NEG) - vars->flow_ctrl = params->req_fc_auto_adv; - else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { - ret = 1; - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_ADV_PAUSE, &ld_pause); - bnx2x_cl45_read(bp, phy, - MDIO_AN_DEVAD, - MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); - pause_result = (ld_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; - pause_result |= (lp_pause & - MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; - DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", - pause_result); - bnx2x_pause_resolve(vars, pause_result); - } - return ret; -} - static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp, struct bnx2x_phy *phy, struct link_vars *vars) @@ -3845,13 +6610,13 @@ static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, pause_result); } } -static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, - struct bnx2x_phy *phy, - u8 port) +static int bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, + struct bnx2x_phy *phy, + u8 port) { u32 count = 0; u16 fw_ver1, fw_msgout; - u8 rc = 0; + int rc = 0; /* Boot port from external ROM */ /* EDC grst */ @@ -3926,7 +6691,7 @@ static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, /******************************************************************/ /* BCM8073 PHY SECTION */ /******************************************************************/ -static u8 bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) +static int bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) { /* This is only required for 8073A1, version 102 only */ u16 val; @@ -3952,7 +6717,7 @@ static u8 bnx2x_8073_is_snr_needed(struct bnx2x *bp, struct bnx2x_phy *phy) return 1; } -static u8 bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) +static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy) { u16 val, cnt, cnt1 ; @@ -4059,9 +6824,9 @@ static void bnx2x_8073_set_pause_cl37(struct link_params *params, msleep(500); } -static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8073_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u16 val = 0, tmp1; @@ -4081,9 +6846,9 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, /* enable LASI */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, (1<<2)); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, (1<<2)); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x0004); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004); bnx2x_8073_set_pause_cl37(params, phy, vars); @@ -4091,7 +6856,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); @@ -4225,7 +6990,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, u16 an1000_status = 0; bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1); @@ -4241,7 +7006,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, /* Check the LASI */ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2); @@ -4367,9 +7132,9 @@ static void bnx2x_8073_link_reset(struct bnx2x_phy *phy, /******************************************************************/ /* BCM8705 PHY SECTION */ /******************************************************************/ -static u8 bnx2x_8705_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8705_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; DP(NETIF_MSG_LINK, "init 8705\n"); @@ -4430,6 +7195,30 @@ static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, /******************************************************************/ /* SFP+ module Section */ /******************************************************************/ +static void bnx2x_set_disable_pmd_transmit(struct link_params *params, + struct bnx2x_phy *phy, + u8 pmd_dis) +{ + struct bnx2x *bp = params->bp; + /* + * Disable transmitter only for bootcodes which can enable it afterwards + * (for D3 link) + */ + if (pmd_dis) { + if (params->feature_config_flags & + FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) + DP(NETIF_MSG_LINK, "Disabling PMD transmitter\n"); + else { + DP(NETIF_MSG_LINK, "NOT disabling PMD transmitter\n"); + return; + } + } else + DP(NETIF_MSG_LINK, "Enabling PMD transmitter\n"); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_DISABLE, pmd_dis); +} + static u8 bnx2x_get_gpio_port(struct link_params *params) { u8 gpio_port; @@ -4443,9 +7232,10 @@ static u8 bnx2x_get_gpio_port(struct link_params *params) swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); return gpio_port ^ (swap_val && swap_override); } -static void bnx2x_sfp_set_transmitter(struct link_params *params, - struct bnx2x_phy *phy, - u8 tx_en) + +static void bnx2x_sfp_e1e2_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) { u16 val; u8 port = params->port; @@ -4500,9 +7290,21 @@ static void bnx2x_sfp_set_transmitter(struct link_params *params, } } -static u8 bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) +static void bnx2x_sfp_set_transmitter(struct link_params *params, + struct bnx2x_phy *phy, + u8 tx_en) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ transmitter to %d\n", tx_en); + if (CHIP_IS_E3(bp)) + bnx2x_sfp_e3_set_transmitter(params, phy, tx_en); + else + bnx2x_sfp_e1e2_set_transmitter(params, phy, tx_en); +} + +static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u16 addr, u8 byte_cnt, u8 *o_buf) { struct bnx2x *bp = params->bp; u16 val = 0; @@ -4566,9 +7368,45 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } -static u8 bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) +static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u16 addr, u8 byte_cnt, + u8 *o_buf) +{ + int rc = 0; + u8 i, j = 0, cnt = 0; + u32 data_array[4]; + u16 addr32; + struct bnx2x *bp = params->bp; + /*DP(NETIF_MSG_LINK, "bnx2x_direct_read_sfp_module_eeprom:" + " addr %d, cnt %d\n", + addr, byte_cnt);*/ + if (byte_cnt > 16) { + DP(NETIF_MSG_LINK, "Reading from eeprom is" + " is limited to 16 bytes\n"); + return -EINVAL; + } + + /* 4 byte aligned address */ + addr32 = addr & (~0x3); + do { + rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, + data_array); + } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); + + if (rc == 0) { + for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) { + o_buf[j] = *((u8 *)data_array + i); + j++; + } + } + + return rc; +} + +static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, + u16 addr, u8 byte_cnt, u8 *o_buf) { struct bnx2x *bp = params->bp; u16 val, i; @@ -4653,27 +7491,39 @@ static u8 bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } -u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf) { - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) - return bnx2x_8726_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - else if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) - return bnx2x_8727_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - return -EINVAL; + int rc = -EINVAL; + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + rc = bnx2x_8726_read_sfp_module_eeprom(phy, params, addr, + byte_cnt, o_buf); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + rc = bnx2x_8727_read_sfp_module_eeprom(phy, params, addr, + byte_cnt, o_buf); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, + byte_cnt, o_buf); + break; + } + return rc; } -static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, - struct link_params *params, - u16 *edc_mode) +static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, + struct link_params *params, + u16 *edc_mode) { struct bnx2x *bp = params->bp; + u32 sync_offset = 0, phy_idx, media_types; u8 val, check_limiting_mode = 0; *edc_mode = EDC_MODE_LIMITING; + phy->media_type = ETH_PHY_UNSPECIFIED; /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(phy, params, @@ -4688,7 +7538,7 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, case SFP_EEPROM_CON_TYPE_VAL_COPPER: { u8 copper_module_type; - + phy->media_type = ETH_PHY_DA_TWINAX; /* * Check if its active cable (includes SFP+ module) * of passive cable @@ -4697,8 +7547,7 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, params, SFP_EEPROM_FC_TX_TECH_ADDR, 1, - &copper_module_type) != - 0) { + &copper_module_type) != 0) { DP(NETIF_MSG_LINK, "Failed to read copper-cable-type" " from SFP+ EEPROM\n"); @@ -4723,6 +7572,7 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, break; } case SFP_EEPROM_CON_TYPE_VAL_LC: + phy->media_type = ETH_PHY_SFP_FIBER; DP(NETIF_MSG_LINK, "Optic module detected\n"); check_limiting_mode = 1; break; @@ -4731,7 +7581,22 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, val); return -EINVAL; } - + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(bp, sync_offset); + /* Update media type for non-PMF sync */ + for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { + if (&(params->phy[phy_idx]) == phy) { + media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); + media_types |= ((phy->media_type & + PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); + break; + } + } + REG_WR(bp, sync_offset, media_types); if (check_limiting_mode) { u8 options[SFP_EEPROM_OPTIONS_SIZE]; if (bnx2x_read_sfp_module_eeprom(phy, @@ -4755,8 +7620,8 @@ static u8 bnx2x_get_edc_mode(struct bnx2x_phy *phy, * This function read the relevant field from the module (SFP+), and verify it * is compliant with this board */ -static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy, - struct link_params *params) +static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; u32 val, cmd; @@ -4825,8 +7690,8 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy, return -EINVAL; } -static u8 bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, - struct link_params *params) +static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, + struct link_params *params) { u8 val; @@ -4858,8 +7723,8 @@ static void bnx2x_8727_power_module(struct bnx2x *bp, * In the GPIO register, bit 4 is use to determine if the GPIOs are * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for * output - * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0 - * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1 + * Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0 + * Bits 8-9 determine the GPIOs value for INPUT in case bit 4 val is 1 * where the 1st bit is the over-current(only input), and 2nd bit is * for power( only output ) * @@ -4868,15 +7733,14 @@ static void bnx2x_8727_power_module(struct bnx2x *bp, */ if (phy->flags & FLAGS_NOC) return; - if (!(phy->flags & - FLAGS_NOC) && is_power_up) + if (is_power_up) val = (1<<4); else /* * Set GPIO control to OUTPUT, and set the power bit * to according to the is_power_up */ - val = ((!(is_power_up)) << 1); + val = (1<<1); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, @@ -4884,9 +7748,9 @@ static void bnx2x_8727_power_module(struct bnx2x *bp, val); } -static u8 bnx2x_8726_set_limiting_mode(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 edc_mode) +static int bnx2x_8726_set_limiting_mode(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 edc_mode) { u16 cur_limiting_mode; @@ -4934,9 +7798,9 @@ static u8 bnx2x_8726_set_limiting_mode(struct bnx2x *bp, return 0; } -static u8 bnx2x_8727_set_limiting_mode(struct bnx2x *bp, - struct bnx2x_phy *phy, - u16 edc_mode) +static int bnx2x_8727_set_limiting_mode(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 edc_mode) { u16 phy_identifier; u16 rom_ver2_val; @@ -4989,7 +7853,7 @@ static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, } } -static void bnx2x_set_sfp_module_fault_led(struct link_params *params, +static void bnx2x_set_e1e2_module_fault_led(struct link_params *params, u8 gpio_mode) { struct bnx2x *bp = params->bp; @@ -5021,12 +7885,146 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params, } } -static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, - struct link_params *params) +static void bnx2x_set_e3_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + u32 pin_cfg; + u8 port = params->port; + struct bnx2x *bp = params->bp; + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >> + PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT; + DP(NETIF_MSG_LINK, "Setting Fault LED to %d using pin cfg %d\n", + gpio_mode, pin_cfg); + bnx2x_set_cfg_pin(bp, pin_cfg, gpio_mode); +} + +static void bnx2x_set_sfp_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ module fault LED to %d\n", gpio_mode); + if (CHIP_IS_E3(bp)) { + /* + * Low ==> if SFP+ module is supported otherwise + * High ==> if SFP+ module is not on the approved vendor list + */ + bnx2x_set_e3_module_fault_led(params, gpio_mode); + } else + bnx2x_set_e1e2_module_fault_led(params, gpio_mode); +} + +static void bnx2x_warpcore_power_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* + * Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} + +static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + bnx2x_warpcore_power_module(params, phy, 0); +} + +static void bnx2x_power_sfp_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Setting SFP+ power to %x\n", power); + + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + bnx2x_8727_power_module(params->bp, phy, power); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + bnx2x_warpcore_power_module(params, phy, power); + break; + default: + break; + } +} +static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + u16 val = 0; + u16 mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + struct bnx2x *bp = params->bp; + + u8 lane = bnx2x_get_warpcore_lane(phy, params); + /* This is a global register which controls all lanes */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + val &= ~(0xf << (lane << 2)); + + switch (edc_mode) { + case EDC_MODE_LINEAR: + case EDC_MODE_LIMITING: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + break; + case EDC_MODE_PASSIVE_DAC: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; + break; + default: + break; + } + + val |= (mode << (lane << 2)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, val); + /* A must read */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + + +} + +static void bnx2x_set_limiting_mode(struct link_params *params, + struct bnx2x_phy *phy, + u16 edc_mode) +{ + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + bnx2x_8726_set_limiting_mode(params->bp, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: + bnx2x_8727_set_limiting_mode(params->bp, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + bnx2x_warpcore_set_limiting_mode(params, phy, edc_mode); + break; + } +} + +int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; u16 edc_mode; - u8 rc = 0; + int rc = 0; u32 val = REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. @@ -5034,7 +8032,8 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n", params->port); - + /* Power up module */ + bnx2x_power_sfp_module(params, phy, 1); if (bnx2x_get_edc_mode(phy, params, &edc_mode) != 0) { DP(NETIF_MSG_LINK, "Failed to get valid module type\n"); return -EINVAL; @@ -5046,12 +8045,11 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); - if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) && - ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) { - /* Shutdown SFP+ module */ + /* Check if need to power down the SFP+ module */ + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) { DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n"); - bnx2x_8727_power_module(bp, phy, 0); + bnx2x_power_sfp_module(params, phy, 0); return rc; } } else { @@ -5059,18 +8057,12 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW); } - /* power up the SFP module */ - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) - bnx2x_8727_power_module(bp, phy, 1); - /* * Check and set limiting mode / LRM mode on 8726. On 8727 it * is done automatically */ - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) - bnx2x_8726_set_limiting_mode(bp, phy, edc_mode); - else - bnx2x_8727_set_limiting_mode(bp, phy, edc_mode); + bnx2x_set_limiting_mode(params, phy, edc_mode); + /* * Enable transmit for this module if the module is approved, or * if unapproved modules should also enable the Tx laser @@ -5088,23 +8080,33 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, void bnx2x_handle_module_detect_int(struct link_params *params) { struct bnx2x *bp = params->bp; - struct bnx2x_phy *phy = ¶ms->phy[EXT_PHY1]; + struct bnx2x_phy *phy; u32 gpio_val; - u8 port = params->port; + u8 gpio_num, gpio_port; + if (CHIP_IS_E3(bp)) + phy = ¶ms->phy[INT_PHY]; + else + phy = ¶ms->phy[EXT_PHY1]; + + if (bnx2x_get_mod_abs_int_cfg(bp, params->chip_id, params->shmem_base, + params->port, &gpio_num, &gpio_port) == + -EINVAL) { + DP(NETIF_MSG_LINK, "Failed to get MOD_ABS interrupt config\n"); + return; + } /* Set valid module led off */ bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); /* Get current gpio val reflecting module plugged in / out*/ - gpio_val = bnx2x_get_gpio(bp, MISC_REGISTERS_GPIO_3, port); + gpio_val = bnx2x_get_gpio(bp, gpio_num, gpio_port); /* Call the handling function in case module is detected */ if (gpio_val == 0) { - - bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3, + bnx2x_power_sfp_module(params, phy, 1); + bnx2x_set_gpio_int(bp, gpio_num, MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, - port); - + gpio_port); if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) bnx2x_sfp_module_detection(phy, params); else @@ -5115,13 +8117,14 @@ void bnx2x_handle_module_detect_int(struct link_params *params) port_feature_config[params->port]. config)); - bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3, + bnx2x_set_gpio_int(bp, gpio_num, MISC_REGISTERS_GPIO_INT_OUTPUT_SET, - port); + gpio_port); /* * Module was plugged out. * Disable transmit for this module */ + phy->media_type = ETH_PHY_NOT_PRESENT; if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) bnx2x_sfp_set_transmitter(params, phy, 0); @@ -5129,6 +8132,29 @@ void bnx2x_handle_module_detect_int(struct link_params *params) } /******************************************************************/ +/* Used by 8706 and 8727 */ +/******************************************************************/ +static void bnx2x_sfp_mask_fault(struct bnx2x *bp, + struct bnx2x_phy *phy, + u16 alarm_status_offset, + u16 alarm_ctrl_offset) +{ + u16 alarm_status, val; + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, alarm_status_offset, + &alarm_status); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, alarm_status_offset, + &alarm_status); + /* Mask or enable the fault event. */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val); + if (alarm_status & (1<<0)) + val &= ~(1<<0); + else + val |= (1<<0); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val); +} +/******************************************************************/ /* common BCM8706/BCM8726 PHY SECTION */ /******************************************************************/ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, @@ -5141,12 +8167,16 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "XGXS 8706/8726\n"); /* Clear RX Alarm*/ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &val2); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); + + bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + /* clear LASI indication*/ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2); bnx2x_cl45_read(bp, phy, @@ -5173,6 +8203,17 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, bnx2x_ext_phy_resolve_fc(phy, params, vars); vars->duplex = DUPLEX_FULL; } + + /* Capture 10G link fault. Read twice to clear stale value. */ + if (vars->line_speed == SPEED_10000) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + if (val1 & (1<<0)) + vars->fault_detected = 1; + } + return link_up; } @@ -5186,6 +8227,10 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, u32 tx_en_mode; u16 cnt, val, tmp1; struct bnx2x *bp = params->bp; + + /* SPF+ PHY: Set flag to check for Tx error */ + vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); /* HW reset */ @@ -5228,7 +8273,11 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, 0x400); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, + 0); + /* Arm LASI for link and Tx fault. */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3); } else { /* Force 1Gbps using autoneg with 1G advertisement */ @@ -5251,10 +8300,10 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x0400); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004); } bnx2x_save_bcm_spirom_ver(bp, phy, params->port); @@ -5281,9 +8330,9 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, return 0; } -static u8 bnx2x_8706_read_status(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8706_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { return bnx2x_8706_8726_read_status(phy, params, vars); } @@ -5358,15 +8407,16 @@ static u8 bnx2x_8726_read_status(struct bnx2x_phy *phy, } -static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8726_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; - u32 val; - u32 swap_val, swap_override, aeu_gpio_mask, offset; DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); + /* SPF+ PHY: Set flag to check for Tx error */ + vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); bnx2x_wait_reset_complete(bp, phy, params); @@ -5387,9 +8437,9 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x5); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400); } else if ((phy->req_line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & @@ -5415,14 +8465,14 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, * change */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x4); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400); } else { /* Default 10G. Set only LASI control */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1); } /* Set TX PreEmphasis if needed */ @@ -5443,30 +8493,6 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, phy->tx_preemphasis[1]); } - /* Set GPIO3 to trigger SFP+ module insertion/removal */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_INPUT_HI_Z, params->port); - - /* The GPIO should be swapped if the swap register is set and active */ - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - - /* Select function upon port-swap configuration */ - if (params->port == 0) { - offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; - aeu_gpio_mask = (swap_val && swap_override) ? - AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 : - AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0; - } else { - offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; - aeu_gpio_mask = (swap_val && swap_override) ? - AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 : - AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1; - } - val = REG_RD(bp, offset); - /* add GPIO3 to group */ - val |= aeu_gpio_mask; - REG_WR(bp, offset, val); return 0; } @@ -5548,9 +8574,9 @@ static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy, MISC_REGISTERS_GPIO_OUTPUT_LOW, port); } -static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8727_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { u32 tx_en_mode; u16 tmp1, val, mod_abs, tmp2; @@ -5559,18 +8585,24 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ + /* SPF+ PHY: Set flag to check for Tx error */ + vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; + bnx2x_wait_reset_complete(bp, phy, params); rx_alarm_ctrl_val = (1<<2) | (1<<5) ; - lasi_ctrl_val = 0x0004; + /* Should be 0x6 to enable XS on Tx side. */ + lasi_ctrl_val = 0x0006; DP(NETIF_MSG_LINK, "Initializing BCM8727\n"); /* enable LASI */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, rx_alarm_ctrl_val); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, lasi_ctrl_val); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, + 0); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, lasi_ctrl_val); /* * Initially configure MOD_ABS to interrupt when module is @@ -5590,6 +8622,9 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + /* Enable/Disable PHY transmitter output */ + bnx2x_set_disable_pmd_transmit(params, phy, 0); + /* Make MOD_ABS give interrupt on change */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val); @@ -5612,7 +8647,7 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, &tmp1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); /* Set option 1G speed */ if (phy->req_line_speed == SPEED_1000) { @@ -5730,7 +8765,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, /* Module is absent */ DP(NETIF_MSG_LINK, "MOD_ABS indication " "show module is absent\n"); - + phy->media_type = ETH_PHY_NOT_PRESENT; /* * 1. Set mod_abs to detect next module * presence event @@ -5752,7 +8787,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); } else { /* Module is present */ @@ -5781,7 +8816,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == @@ -5805,26 +8840,29 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; - u8 link_up = 0; + u8 link_up = 0, oc_port = params->port; u16 link_status = 0; u16 rx_alarm_status, lasi_ctrl, val1; /* If PHY is not initialized, do not check link status */ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, &lasi_ctrl); if (!lasi_ctrl) return 0; - /* Check the LASI */ + /* Check the LASI on Rx */ bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); vars->line_speed = 0; DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", rx_alarm_status); + bnx2x_sfp_mask_fault(bp, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); DP(NETIF_MSG_LINK, "8727 LASI status 0x%x\n", val1); @@ -5843,8 +8881,10 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, &val1); if ((val1 & (1<<8)) == 0) { + if (!CHIP_IS_E1x(bp)) + oc_port = BP_PATH(bp) + (params->port << 1); DP(NETIF_MSG_LINK, "8727 Power fault has been detected" - " on port %d\n", params->port); + " on port %d\n", oc_port); netdev_err(bp->dev, "Error: Power fault on Port %d has" " been detected and the power to " "that SFP+ module has been removed" @@ -5852,11 +8892,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, " Please remove the SFP+ module and" " restart the system to clear this" " error.\n", - params->port); + oc_port); /* Disable all RX_ALARMs except for mod_abs */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM_CTRL, (1<<5)); + MDIO_PMA_LASI_RXCTRL, (1<<5)); bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, @@ -5869,7 +8909,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, /* Clear RX alarm */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); return 0; } } /* Over current check */ @@ -5879,7 +8919,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, bnx2x_8727_handle_mod_abs(phy, params); /* Enable all mod_abs and link detection bits */ bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, ((1<<5) | (1<<2))); } DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n"); @@ -5915,6 +8955,20 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "port %x: External link is down\n", params->port); } + + /* Capture 10G link fault. */ + if (vars->line_speed == SPEED_10000) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + if (val1 & (1<<0)) { + vars->fault_detected = 1; + } + } + if (link_up) { bnx2x_ext_phy_resolve_fc(phy, params, vars); vars->duplex = DUPLEX_FULL; @@ -5945,10 +8999,14 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; + + /* Enable/Disable PHY transmitter output */ + bnx2x_set_disable_pmd_transmit(params, phy, 1); + /* Disable Transmitter */ bnx2x_sfp_set_transmitter(params, phy, 0); /* Clear LASI */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0); } @@ -5958,111 +9016,106 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, struct link_params *params) { - u16 val, fw_ver1, fw_ver2, cnt, adj; + u16 val, fw_ver1, fw_ver2, cnt; + u8 port; struct bnx2x *bp = params->bp; - adj = 0; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - adj = -1; + port = params->port; /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/ /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0014); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, 0x0300); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x0009); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); if (val & 1) break; udelay(5); } if (cnt == 100) { DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n"); - bnx2x_save_spirom_version(bp, params->port, 0, + bnx2x_save_spirom_version(bp, port, 0, phy->ver_addr); return; } /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x000A); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); if (val & 1) break; udelay(5); } if (cnt == 100) { DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n"); - bnx2x_save_spirom_version(bp, params->port, 0, + bnx2x_save_spirom_version(bp, port, 0, phy->ver_addr); return; } /* lower 16 bits of the register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, &fw_ver1); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); /* upper 16 bits of register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, &fw_ver2); + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); - bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1, + bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1, phy->ver_addr); } static void bnx2x_848xx_set_led(struct bnx2x *bp, struct bnx2x_phy *phy) { - u16 val, adj; - - adj = 0; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - adj = -1; + u16 val; /* PHYC_CTL_LED_CTL */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL + adj, &val); + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); val &= 0xFE00; val |= 0x0092; bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LINK_SIGNAL + adj, val); + MDIO_PMA_REG_8481_LINK_SIGNAL, val); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED1_MASK + adj, + MDIO_PMA_REG_8481_LED1_MASK, 0x80); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED2_MASK + adj, + MDIO_PMA_REG_8481_LED2_MASK, 0x18); /* Select activity source by Tx and Rx, as suggested by PHY AE */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_MASK + adj, + MDIO_PMA_REG_8481_LED3_MASK, 0x0006); /* Select the closest activity blink rate to that in 10/100/1000 */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8481_LED3_BLINK + adj, + MDIO_PMA_REG_8481_LED3_BLINK, 0); bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, &val); + MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val); val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, - MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, val); + MDIO_PMA_REG_84823_CTL_LED_CTL_1, val); /* 'Interrupt Mask' */ bnx2x_cl45_write(bp, phy, @@ -6070,12 +9123,19 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp, 0xFFFB, 0xFFFD); } -static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u16 autoneg_val, an_1000_val, an_10_100_val; + u16 tmp_req_line_speed; + + tmp_req_line_speed = phy->req_line_speed; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + if (phy->req_line_speed == SPEED_10000) + phy->req_line_speed = SPEED_AUTO_NEG; + /* * This phy uses the NIG latch mechanism since link indication * arrives through its LED4 and not via its LASI signal, so we @@ -6122,11 +9182,14 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, an_1000_val); - /* set 10 speed advertisement */ + /* set 100 speed advertisement */ if (((phy->req_line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) && + (phy->supported & + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full)))) { an_10_100_val |= (1<<7); /* Enable autoneg and restart autoneg for legacy speeds */ autoneg_val |= (1<<9 | 1<<12); @@ -6137,9 +9200,12 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, } /* set 10 speed advertisement */ if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && + (phy->supported & + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full)))) { an_10_100_val |= (1<<5); autoneg_val |= (1<<9 | 1<<12); if (phy->req_duplex == DUPLEX_FULL) @@ -6148,7 +9214,10 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, } /* Only 10/100 are allowed to work in FORCE mode */ - if (phy->req_line_speed == SPEED_100) { + if ((phy->req_line_speed == SPEED_100) && + (phy->supported & + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full))) { autoneg_val |= (1<<13); /* Enabled AUTO-MDIX when autoneg is disabled */ bnx2x_cl45_write(bp, phy, @@ -6156,7 +9225,10 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, (1<<15 | 1<<9 | 7<<0)); DP(NETIF_MSG_LINK, "Setting 100M force\n"); } - if (phy->req_line_speed == SPEED_10) { + if ((phy->req_line_speed == SPEED_10) && + (phy->supported & + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full))) { /* Enabled AUTO-MDIX when autoneg is disabled */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, @@ -6179,10 +9251,10 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || (phy->req_line_speed == SPEED_10000)) { - DP(NETIF_MSG_LINK, "Advertising 10G\n"); - /* Restart autoneg for 10G*/ + DP(NETIF_MSG_LINK, "Advertising 10G\n"); + /* Restart autoneg for 10G*/ - bnx2x_cl45_write(bp, phy, + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x3200); } else if (phy->req_line_speed != SPEED_10 && @@ -6195,12 +9267,14 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, /* Save spirom version */ bnx2x_save_848xx_spirom_version(phy, params); + phy->req_line_speed = tmp_req_line_speed; + return 0; } -static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_8481_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; /* Restore normal power mode*/ @@ -6215,33 +9289,200 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, return bnx2x_848xx_cmn_config_init(phy, params, vars); } -static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) + +#define PHY84833_HDSHK_WAIT 300 +static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + u32 idx; + u32 pair_swap; + u16 val; + u16 data; + struct bnx2x *bp = params->bp; + /* Do pair swap */ + + /* Check for configuration. */ + pair_swap = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].xgbt_phy_cfg)) & + PORT_HW_CFG_RJ45_PAIR_SWAP_MASK; + + if (pair_swap == 0) + return 0; + + data = (u16)pair_swap; + + /* Write CMD_OPEN_OVERRIDE to STATUS reg */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, + PHY84833_CMD_OPEN_OVERRIDE); + for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); + if (val == PHY84833_CMD_OPEN_FOR_CMDS) + break; + msleep(1); + } + if (idx >= PHY84833_HDSHK_WAIT) { + DP(NETIF_MSG_LINK, "Pairswap: FW not ready.\n"); + return -EINVAL; + } + + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG4, + data); + /* Issue pair swap command */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG0, + PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE); + for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); + if ((val == PHY84833_CMD_COMPLETE_PASS) || + (val == PHY84833_CMD_COMPLETE_ERROR)) + break; + msleep(1); + } + if ((idx >= PHY84833_HDSHK_WAIT) || + (val == PHY84833_CMD_COMPLETE_ERROR)) { + DP(NETIF_MSG_LINK, "Pairswap: override failed.\n"); + return -EINVAL; + } + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, + PHY84833_CMD_CLEAR_COMPLETE); + DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data); + return 0; +} + + +static u8 bnx2x_84833_get_reset_gpios(struct bnx2x *bp, + u32 shmem_base_path[], + u32 chip_id) +{ + u32 reset_pin[2]; + u32 idx; + u8 reset_gpios; + if (CHIP_IS_E3(bp)) { + /* Assume that these will be GPIOs, not EPIOs. */ + for (idx = 0; idx < 2; idx++) { + /* Map config param to register bit. */ + reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info.port_hw_config[0].e3_cmn_pin_cfg)); + reset_pin[idx] = (reset_pin[idx] & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + reset_pin[idx] -= PIN_CFG_GPIO0_P0; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); + } else { + /* E2, look from diff place of shmem. */ + for (idx = 0; idx < 2; idx++) { + reset_pin[idx] = REG_RD(bp, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info.port_hw_config[0].default_cfg)); + reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK; + reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0; + reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (u8)(reset_pin[0] | reset_pin[1]); + } + + return reset_gpios; +} + +static int bnx2x_84833_hw_reset_phy(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u8 reset_gpios; + u32 other_shmem_base_addr = REG_RD(bp, params->shmem2_base + + offsetof(struct shmem2_region, + other_shmem_base_addr)); + + u32 shmem_base_path[2]; + shmem_base_path[0] = params->shmem_base; + shmem_base_path[1] = other_shmem_base_addr; + + reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, + params->chip_id); + + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); + udelay(10); + DP(NETIF_MSG_LINK, "84833 hw reset on pin values 0x%x\n", + reset_gpios); + + return 0; +} + +static int bnx2x_84833_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 chip_id) +{ + u8 reset_gpios; + + reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, chip_id); + + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); + udelay(10); + bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH); + msleep(800); + DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n", + reset_gpios); + + return 0; +} + +#define PHY84833_CONSTANT_LATENCY 1193 +static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 port, initialize = 1; - u16 val, adj; + u16 val; u16 temp; - u32 actual_phy_selection, cms_enable; - u8 rc = 0; - - /* This is just for MDIO_CTL_REG_84823_MEDIA register. */ - adj = 0; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - adj = 3; + u32 actual_phy_selection, cms_enable, idx; + int rc = 0; msleep(1); - if (CHIP_IS_E2(bp)) + + if (!(CHIP_IS_E1(bp))) port = BP_PATH(bp); else port = params->port; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, - port); + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + } else { + /* MDIO reset */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x8000); + /* Bring PHY out of super isolate mode */ + bnx2x_cl45_read(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); + val &= ~MDIO_84833_SUPER_ISOLATE; + bnx2x_cl45_write(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); + } + bnx2x_wait_reset_complete(bp, phy, params); + /* Wait for GPHY to come out of reset */ msleep(50); + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + bnx2x_84833_pair_swap_cfg(phy, params, vars); + /* * BCM84823 requires that XGXS links up first @ 10G for normal behavior */ @@ -6254,14 +9495,20 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, /* Set dual-media configuration according to configuration */ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_MEDIA + adj, &val); + MDIO_CTL_REG_84823_MEDIA, &val); val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | MDIO_CTL_REG_84823_MEDIA_LINE_MASK | MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN | MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK | MDIO_CTL_REG_84823_MEDIA_FIBER_1G); - val |= MDIO_CTL_REG_84823_CTRL_MAC_XFI | - MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L; + + if (CHIP_IS_E3(bp)) { + val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | + MDIO_CTL_REG_84823_MEDIA_LINE_MASK); + } else { + val |= (MDIO_CTL_REG_84823_CTRL_MAC_XFI | + MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L); + } actual_phy_selection = bnx2x_phy_selection(params); @@ -6287,28 +9534,90 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G; bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_MEDIA + adj, val); + MDIO_CTL_REG_84823_MEDIA, val); DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n", params->multi_phy_config, val); + /* AutogrEEEn */ + if (params->feature_config_flags & + FEATURE_CONFIG_AUTOGREEEN_ENABLED) { + /* Ensure that f/w is ready */ + for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); + if (val == PHY84833_CMD_OPEN_FOR_CMDS) + break; + usleep_range(1000, 1000); + } + if (idx >= PHY84833_HDSHK_WAIT) { + DP(NETIF_MSG_LINK, "AutogrEEEn: FW not ready.\n"); + return -EINVAL; + } + + /* Select EEE mode */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG3, + 0x2); + + /* Set Idle and Latency */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG4, + PHY84833_CONSTANT_LATENCY + 1); + + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_DATA3_REG, + PHY84833_CONSTANT_LATENCY + 1); + + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_DATA4_REG, + PHY84833_CONSTANT_LATENCY); + + /* Send EEE instruction to command register */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG0, + PHY84833_DIAG_CMD_SET_EEE_MODE); + + /* Ensure that the command has completed */ + for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, &val); + if ((val == PHY84833_CMD_COMPLETE_PASS) || + (val == PHY84833_CMD_COMPLETE_ERROR)) + break; + usleep_range(1000, 1000); + } + if ((idx >= PHY84833_HDSHK_WAIT) || + (val == PHY84833_CMD_COMPLETE_ERROR)) { + DP(NETIF_MSG_LINK, "AutogrEEEn: command failed.\n"); + return -EINVAL; + } + + /* Reset command handler */ + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_SCRATCH_REG2, + PHY84833_CMD_CLEAR_COMPLETE); + } + if (initialize) rc = bnx2x_848xx_cmn_config_init(phy, params, vars); else bnx2x_save_848xx_spirom_version(phy, params); - cms_enable = REG_RD(bp, params->shmem_base + + /* 84833 PHY has a better feature and doesn't need to support this. */ + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + cms_enable = REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info.port_hw_config[params->port].default_cfg)) & PORT_HW_CFG_ENABLE_CMS_MASK; - bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_USER_CTRL_REG, &val); - if (cms_enable) - val |= MDIO_CTL_REG_84823_USER_CTRL_CMS; - else - val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS; - bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, - MDIO_CTL_REG_84823_USER_CTRL_REG, val); - + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, &val); + if (cms_enable) + val |= MDIO_CTL_REG_84823_USER_CTRL_CMS; + else + val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS; + bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, val); + } return rc; } @@ -6318,20 +9627,16 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u16 val, val1, val2, adj; + u16 val, val1, val2; u8 link_up = 0; - /* Reg offset adjustment for 84833 */ - adj = 0; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) - adj = -1; /* Check 10G-BaseT link status */ /* Check PMD signal ok */ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, 0xFFFA, &val1); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL + adj, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2); DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2); @@ -6403,9 +9708,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, return link_up; } -static u8 bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) + +static int bnx2x_848xx_format_ver(u32 raw_ver, u8 *str, u16 *len) { - u8 status = 0; + int status = 0; u32 spirom_ver; spirom_ver = ((raw_ver & 0xF80) >> 7) << 16 | (raw_ver & 0x7F); status = bnx2x_format_ver(spirom_ver, str, len); @@ -6435,13 +9741,27 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u8 port; - if (CHIP_IS_E2(bp)) + u16 val16; + + if (!(CHIP_IS_E1(bp))) port = BP_PATH(bp); else port = params->port; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, - MISC_REGISTERS_GPIO_OUTPUT_LOW, - port); + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_LOW, + port); + } else { + bnx2x_cl45_read(bp, phy, + MDIO_CTL_DEVAD, + 0x400f, &val16); + /* Put to low power mode on newer FW */ + if ((val16 & 0x303f) > 0x1009) + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x800); + } } static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, @@ -6449,11 +9769,17 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u16 val; + u8 port; + + if (!(CHIP_IS_E1(bp))) + port = BP_PATH(bp); + else + port = params->port; switch (mode) { case LED_MODE_OFF: - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", params->port); + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -6489,7 +9815,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, case LED_MODE_FRONT_PANEL_OFF: DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n", - params->port); + port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -6524,7 +9850,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, break; case LED_MODE_ON: - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", params->port); + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -6571,7 +9897,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, case LED_MODE_OPER: - DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", params->port); + DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -6633,7 +9959,388 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, } break; } + + /* + * This is a workaround for E3+84833 until autoneg + * restart is fixed in f/w + */ + if (CHIP_IS_E3(bp)) { + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, &val); + } +} + +/******************************************************************/ +/* 54618SE PHY SECTION */ +/******************************************************************/ +static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u8 port; + u16 autoneg_val, an_1000_val, an_10_100_val, fc_val, temp; + u32 cfg_pin; + + DP(NETIF_MSG_LINK, "54618SE cfg init\n"); + usleep_range(1000, 1000); + + /* This works with E3 only, no need to check the chip + before determining the port. */ + port = params->port; + + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin high to bring the GPHY out of reset. */ + bnx2x_set_cfg_pin(bp, cfg_pin, 1); + + /* wait for GPHY to reset */ + msleep(50); + + /* reset phy */ + bnx2x_cl22_write(bp, phy, + MDIO_PMA_REG_CTRL, 0x8000); + bnx2x_wait_reset_complete(bp, phy, params); + + /*wait for GPHY to reset */ + msleep(50); + + /* Configure LED4: set to INTR (0x6). */ + /* Accessing shadow register 0xe. */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL2); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= ~(0xf << 4); + temp |= (0x6 << 4); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + /* Configure INTR based on link status change. */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_INTR_MASK, + ~MDIO_REG_INTR_MASK_LINK_STATUS); + + /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */ + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_AUTO_DET_MED); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD; + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + + /* Set up fc */ + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + fc_val = 0; + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) + fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + + /* read all advertisement */ + bnx2x_cl22_read(bp, phy, + 0x09, + &an_1000_val); + + bnx2x_cl22_read(bp, phy, + 0x04, + &an_10_100_val); + + bnx2x_cl22_read(bp, phy, + MDIO_PMA_REG_CTRL, + &autoneg_val); + + /* Disable forced speed */ + autoneg_val &= ~((1<<6) | (1<<8) | (1<<9) | (1<<12) | (1<<13)); + an_10_100_val &= ~((1<<5) | (1<<6) | (1<<7) | (1<<8) | (1<<10) | + (1<<11)); + + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { + an_1000_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1<<9); + DP(NETIF_MSG_LINK, "Advertising 1G\n"); + } else + an_1000_val &= ~((1<<8) | (1<<9)); + + bnx2x_cl22_write(bp, phy, + 0x09, + an_1000_val); + bnx2x_cl22_read(bp, phy, + 0x09, + &an_1000_val); + + /* set 100 speed advertisement */ + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { + an_10_100_val |= (1<<7); + /* Enable autoneg and restart autoneg for legacy speeds */ + autoneg_val |= (1<<9 | 1<<12); + + if (phy->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<8); + DP(NETIF_MSG_LINK, "Advertising 100M\n"); + } + + /* set 10 speed advertisement */ + if (((phy->req_line_speed == SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + if (phy->req_duplex == DUPLEX_FULL) + an_10_100_val |= (1<<6); + DP(NETIF_MSG_LINK, "Advertising 10M\n"); + } + + /* Only 10/100 are allowed to work in FORCE mode */ + if (phy->req_line_speed == SPEED_100) { + autoneg_val |= (1<<13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl22_write(bp, phy, + 0x18, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 100M force\n"); + } + if (phy->req_line_speed == SPEED_10) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + bnx2x_cl22_write(bp, phy, + 0x18, + (1<<15 | 1<<9 | 7<<0)); + DP(NETIF_MSG_LINK, "Setting 10M force\n"); + } + + /* Check if we should turn on Auto-GrEEEn */ + bnx2x_cl22_read(bp, phy, MDIO_REG_GPHY_PHYID_LSB, &temp); + if (temp == MDIO_REG_GPHY_ID_54618SE) { + if (params->feature_config_flags & + FEATURE_CONFIG_AUTOGREEEN_ENABLED) { + temp = 6; + DP(NETIF_MSG_LINK, "Enabling Auto-GrEEEn\n"); + } else { + temp = 0; + DP(NETIF_MSG_LINK, "Disabling Auto-GrEEEn\n"); + } + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_ADDR_REG, MDIO_AN_DEVAD); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_DATA_REG, + MDIO_REG_GPHY_EEE_ADV); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_ADDR_REG, + (0x1 << 14) | MDIO_AN_DEVAD); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_DATA_REG, + temp); + } + + bnx2x_cl22_write(bp, phy, + 0x04, + an_10_100_val | fc_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1<<8); + + bnx2x_cl22_write(bp, phy, + MDIO_PMA_REG_CTRL, autoneg_val); + + return 0; +} + +static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode); + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + case LED_MODE_OPER: + case LED_MODE_ON: + default: + break; + } + return; +} + +static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port; + + /* This works with E3 only, no need to check the chip + before determining the port. */ + port = params->port; + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin low to put GPHY in reset. */ + bnx2x_set_cfg_pin(bp, cfg_pin, 0); +} + +static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u16 val; + u8 link_up = 0; + u16 legacy_status, legacy_speed; + + /* Get speed operation status */ + bnx2x_cl22_read(bp, phy, + 0x19, + &legacy_status); + DP(NETIF_MSG_LINK, "54618SE read_status: 0x%x\n", legacy_status); + + /* Read status to clear the PHY interrupt. */ + bnx2x_cl22_read(bp, phy, + MDIO_REG_INTR_STATUS, + &val); + + link_up = ((legacy_status & (1<<2)) == (1<<2)); + + if (link_up) { + legacy_speed = (legacy_status & (7<<8)); + if (legacy_speed == (7<<8)) { + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (6<<8)) { + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (5<<8)) { + vars->line_speed = SPEED_100; + vars->duplex = DUPLEX_FULL; + } + /* Omitting 100Base-T4 for now */ + else if (legacy_speed == (3<<8)) { + vars->line_speed = SPEED_100; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (2<<8)) { + vars->line_speed = SPEED_10; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (1<<8)) { + vars->line_speed = SPEED_10; + vars->duplex = DUPLEX_HALF; + } else /* Should not happen */ + vars->line_speed = 0; + + DP(NETIF_MSG_LINK, "Link is up in %dMbps," + " is_duplex_full= %d\n", vars->line_speed, + (vars->duplex == DUPLEX_FULL)); + + /* Check legacy speed AN resolution */ + bnx2x_cl22_read(bp, phy, + 0x01, + &val); + if (val & (1<<5)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + bnx2x_cl22_read(bp, phy, + 0x06, + &val); + if ((val & (1<<0)) == 0) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + + DP(NETIF_MSG_LINK, "BCM54618SE: link speed is %d\n", + vars->line_speed); + + /* Report whether EEE is resolved. */ + bnx2x_cl22_read(bp, phy, MDIO_REG_GPHY_PHYID_LSB, &val); + if (val == MDIO_REG_GPHY_ID_54618SE) { + if (vars->link_status & + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) + val = 0; + else { + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_ADDR_REG, + MDIO_AN_DEVAD); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_DATA_REG, + MDIO_REG_GPHY_EEE_RESOLVED); + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_CL45_ADDR_REG, + (0x1 << 14) | MDIO_AN_DEVAD); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_CL45_DATA_REG, + &val); + } + DP(NETIF_MSG_LINK, "EEE resolution: 0x%x\n", val); + } + + bnx2x_ext_phy_resolve_fc(phy, params, vars); + } + return link_up; } + +static void bnx2x_54618se_config_loopback(struct bnx2x_phy *phy, + struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 val; + u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + + DP(NETIF_MSG_LINK, "2PMA/PMD ext_phy_loopback: 54618se\n"); + + /* Enable master/slave manual mmode and set to master */ + /* mii write 9 [bits set 11 12] */ + bnx2x_cl22_write(bp, phy, 0x09, 3<<11); + + /* forced 1G and disable autoneg */ + /* set val [mii read 0] */ + /* set val [expr $val & [bits clear 6 12 13]] */ + /* set val [expr $val | [bits set 6 8]] */ + /* mii write 0 $val */ + bnx2x_cl22_read(bp, phy, 0x00, &val); + val &= ~((1<<6) | (1<<12) | (1<<13)); + val |= (1<<6) | (1<<8); + bnx2x_cl22_write(bp, phy, 0x00, val); + + /* Set external loopback and Tx using 6dB coding */ + /* mii write 0x18 7 */ + /* set val [mii read 0x18] */ + /* mii write 0x18 [expr $val | [bits set 10 15]] */ + bnx2x_cl22_write(bp, phy, 0x18, 7); + bnx2x_cl22_read(bp, phy, 0x18, &val); + bnx2x_cl22_write(bp, phy, 0x18, val | (1<<10) | (1<<15)); + + /* This register opens the gate for the UMAC despite its name */ + REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1); + + /* + * Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710); +} + /******************************************************************/ /* SFX7101 PHY SECTION */ /******************************************************************/ @@ -6646,9 +10353,9 @@ static void bnx2x_7101_config_loopback(struct bnx2x_phy *phy, MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); } -static u8 bnx2x_7101_config_init(struct bnx2x_phy *phy, - struct link_params *params, - struct link_vars *vars) +static int bnx2x_7101_config_init(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) { u16 fw_ver1, fw_ver2, val; struct bnx2x *bp = params->bp; @@ -6662,7 +10369,7 @@ static u8 bnx2x_7101_config_init(struct bnx2x_phy *phy, bnx2x_wait_reset_complete(bp, phy, params); bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1); DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n"); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1<<3)); @@ -6694,9 +10401,9 @@ static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, u8 link_up; u16 val1, val2; bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val2); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS, &val1); + MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n", val2, val1); bnx2x_cl45_read(bp, phy, @@ -6721,8 +10428,7 @@ static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, return link_up; } - -static u8 bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) +static int bnx2x_7101_format_ver(u32 spirom_ver, u8 *str, u16 *len) { if (*len < 5) return -EINVAL; @@ -6800,9 +10506,8 @@ static void bnx2x_7101_set_link_led(struct bnx2x_phy *phy, static struct bnx2x_phy phy_null = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN, .addr = 0, - .flags = FLAGS_INIT_XGXS_FIRST, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6827,9 +10532,8 @@ static struct bnx2x_phy phy_null = { static struct bnx2x_phy phy_serdes = { .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT, .addr = 0xff, - .flags = 0, .def_md_devad = 0, - .reserved = 0, + .flags = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6843,14 +10547,14 @@ static struct bnx2x_phy phy_serdes = { SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_UNSPECIFIED, + .media_type = ETH_PHY_BASE_T, .ver_addr = 0, .req_flow_ctrl = 0, .req_line_speed = 0, .speed_cap_mask = 0, .req_duplex = 0, .rsrv = 0, - .config_init = (config_init_t)bnx2x_init_serdes, + .config_init = (config_init_t)bnx2x_xgxs_config_init, .read_status = (read_status_t)bnx2x_link_settings_status, .link_reset = (link_reset_t)bnx2x_int_link_reset, .config_loopback = (config_loopback_t)NULL, @@ -6863,9 +10567,8 @@ static struct bnx2x_phy phy_serdes = { static struct bnx2x_phy phy_xgxs = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, .addr = 0xff, - .flags = 0, .def_md_devad = 0, - .reserved = 0, + .flags = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6880,14 +10583,14 @@ static struct bnx2x_phy phy_xgxs = { SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_UNSPECIFIED, + .media_type = ETH_PHY_CX4, .ver_addr = 0, .req_flow_ctrl = 0, .req_line_speed = 0, .speed_cap_mask = 0, .req_duplex = 0, .rsrv = 0, - .config_init = (config_init_t)bnx2x_init_xgxs, + .config_init = (config_init_t)bnx2x_xgxs_config_init, .read_status = (read_status_t)bnx2x_link_settings_status, .link_reset = (link_reset_t)bnx2x_int_link_reset, .config_loopback = (config_loopback_t)bnx2x_set_xgxs_loopback, @@ -6896,13 +10599,49 @@ static struct bnx2x_phy phy_xgxs = { .set_link_led = (set_link_led_t)NULL, .phy_specific_func = (phy_specific_func_t)NULL }; +static struct bnx2x_phy phy_warpcore = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_HW_LOCK_REQUIRED, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_20000baseKR2_Full | + SUPPORTED_20000baseMLD2_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_UNSPECIFIED, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */0, + /* rsrv = */0, + .config_init = (config_init_t)bnx2x_warpcore_config_init, + .read_status = (read_status_t)bnx2x_warpcore_read_status, + .link_reset = (link_reset_t)bnx2x_warpcore_link_reset, + .config_loopback = (config_loopback_t)bnx2x_set_warpcore_loopback, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)bnx2x_warpcore_hw_reset, + .set_link_led = (set_link_led_t)NULL, + .phy_specific_func = (phy_specific_func_t)NULL +}; + static struct bnx2x_phy phy_7101 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, .addr = 0xff, - .flags = FLAGS_FAN_FAILURE_DET_REQ, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6930,9 +10669,8 @@ static struct bnx2x_phy phy_7101 = { static struct bnx2x_phy phy_8073 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, .addr = 0xff, - .flags = FLAGS_HW_LOCK_REQUIRED, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_HW_LOCK_REQUIRED, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6943,7 +10681,7 @@ static struct bnx2x_phy phy_8073 = { SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_UNSPECIFIED, + .media_type = ETH_PHY_KR, .ver_addr = 0, .req_flow_ctrl = 0, .req_line_speed = 0, @@ -6962,9 +10700,8 @@ static struct bnx2x_phy phy_8073 = { static struct bnx2x_phy phy_8705 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705, .addr = 0xff, - .flags = FLAGS_INIT_XGXS_FIRST, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -6991,9 +10728,8 @@ static struct bnx2x_phy phy_8705 = { static struct bnx2x_phy phy_8706 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, .addr = 0xff, - .flags = FLAGS_INIT_XGXS_FIRST, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -7022,10 +10758,9 @@ static struct bnx2x_phy phy_8706 = { static struct bnx2x_phy phy_8726 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, .addr = 0xff, + .def_md_devad = 0, .flags = (FLAGS_HW_LOCK_REQUIRED | FLAGS_INIT_XGXS_FIRST), - .def_md_devad = 0, - .reserved = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -7035,7 +10770,7 @@ static struct bnx2x_phy phy_8726 = { SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_SFP_FIBER, + .media_type = ETH_PHY_NOT_PRESENT, .ver_addr = 0, .req_flow_ctrl = 0, .req_line_speed = 0, @@ -7055,9 +10790,8 @@ static struct bnx2x_phy phy_8726 = { static struct bnx2x_phy phy_8727 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, .addr = 0xff, - .flags = FLAGS_FAN_FAILURE_DET_REQ, .def_md_devad = 0, - .reserved = 0, + .flags = FLAGS_FAN_FAILURE_DET_REQ, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -7066,7 +10800,7 @@ static struct bnx2x_phy phy_8727 = { SUPPORTED_FIBRE | SUPPORTED_Pause | SUPPORTED_Asym_Pause), - .media_type = ETH_PHY_SFP_FIBER, + .media_type = ETH_PHY_NOT_PRESENT, .ver_addr = 0, .req_flow_ctrl = 0, .req_line_speed = 0, @@ -7085,10 +10819,9 @@ static struct bnx2x_phy phy_8727 = { static struct bnx2x_phy phy_8481 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481, .addr = 0xff, + .def_md_devad = 0, .flags = FLAGS_FAN_FAILURE_DET_REQ | FLAGS_REARM_LATCH_SIGNAL, - .def_md_devad = 0, - .reserved = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -7122,10 +10855,9 @@ static struct bnx2x_phy phy_8481 = { static struct bnx2x_phy phy_84823 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823, .addr = 0xff, + .def_md_devad = 0, .flags = FLAGS_FAN_FAILURE_DET_REQ | FLAGS_REARM_LATCH_SIGNAL, - .def_md_devad = 0, - .reserved = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -7159,16 +10891,13 @@ static struct bnx2x_phy phy_84823 = { static struct bnx2x_phy phy_84833 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833, .addr = 0xff, + .def_md_devad = 0, .flags = FLAGS_FAN_FAILURE_DET_REQ | FLAGS_REARM_LATCH_SIGNAL, - .def_md_devad = 0, - .reserved = 0, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | + .supported = (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full | @@ -7188,11 +10917,44 @@ static struct bnx2x_phy phy_84833 = { .link_reset = (link_reset_t)bnx2x_848x3_link_reset, .config_loopback = (config_loopback_t)NULL, .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver, - .hw_reset = (hw_reset_t)NULL, + .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy, .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led, .phy_specific_func = (phy_specific_func_t)NULL }; +static struct bnx2x_phy phy_54618se = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE, + .addr = 0xff, + .def_md_devad = 0, + .flags = FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .media_type = ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */0, + /* rsrv = */0, + .config_init = (config_init_t)bnx2x_54618se_config_init, + .read_status = (read_status_t)bnx2x_54618se_read_status, + .link_reset = (link_reset_t)bnx2x_54618se_link_reset, + .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, + .format_fw_ver = (format_fw_ver_t)NULL, + .hw_reset = (hw_reset_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led, + .phy_specific_func = (phy_specific_func_t)NULL +}; /*****************************************************************/ /* */ /* Populate the phy according. Main function: bnx2x_populate_phy */ @@ -7259,8 +11021,8 @@ static u32 bnx2x_get_ext_phy_config(struct bnx2x *bp, u32 shmem_base, return ext_phy_config; } -static u8 bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, - struct bnx2x_phy *phy) +static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, + struct bnx2x_phy *phy) { u32 phy_addr; u32 chip_id; @@ -7269,22 +11031,105 @@ static u8 bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, dev_info.port_feature_config[port].link_config)) & PORT_FEATURE_CONNECTED_SWITCH_MASK); chip_id = REG_RD(bp, MISC_REG_CHIP_NUM) << 16; - switch (switch_cfg) { - case SWITCH_CFG_1G: + DP(NETIF_MSG_LINK, ":chip_id = 0x%x\n", chip_id); + if (USES_WARPCORE(bp)) { + u32 serdes_net_if; phy_addr = REG_RD(bp, - NIG_REG_SERDES0_CTRL_PHY_ADDR + - port * 0x10); - *phy = phy_serdes; - break; - case SWITCH_CFG_10G: - phy_addr = REG_RD(bp, - NIG_REG_XGXS0_CTRL_PHY_ADDR + - port * 0x18); - *phy = phy_xgxs; - break; - default: - DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); - return -EINVAL; + MISC_REG_WC0_CTRL_PHY_ADDR); + *phy = phy_warpcore; + if (REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR) == 0x3) + phy->flags |= FLAGS_4_PORT_MODE; + else + phy->flags &= ~FLAGS_4_PORT_MODE; + /* Check Dual mode */ + serdes_net_if = (REG_RD(bp, shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[port].default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + /* + * Set the appropriate supported and flags indications per + * interface type of the chip + */ + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_SGMII: + phy->supported &= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->media_type = ETH_PHY_BASE_T; + break; + case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->media_type = ETH_PHY_XFP_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_SFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + phy->media_type = ETH_PHY_SFP_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_KR: + phy->media_type = ETH_PHY_KR; + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + phy->media_type = ETH_PHY_KR; + phy->flags |= FLAGS_WC_DUAL_MODE; + phy->supported &= (SUPPORTED_20000baseMLD2_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_KR2: + phy->media_type = ETH_PHY_KR; + phy->flags |= FLAGS_WC_DUAL_MODE; + phy->supported &= (SUPPORTED_20000baseKR2_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + default: + DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n", + serdes_net_if); + break; + } + + /* + * Enable MDC/MDIO work-around for E3 A0 since free running MDC + * was not set as expected. For B0, ECO will be enabled so there + * won't be an issue there + */ + if (CHIP_REV(bp) == CHIP_REV_Ax) + phy->flags |= FLAGS_MDC_MDIO_WA; + } else { + switch (switch_cfg) { + case SWITCH_CFG_1G: + phy_addr = REG_RD(bp, + NIG_REG_SERDES0_CTRL_PHY_ADDR + + port * 0x10); + *phy = phy_serdes; + break; + case SWITCH_CFG_10G: + phy_addr = REG_RD(bp, + NIG_REG_XGXS0_CTRL_PHY_ADDR + + port * 0x18); + *phy = phy_xgxs; + break; + default: + DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); + return -EINVAL; + } } phy->addr = (u8)phy_addr; phy->mdio_ctrl = bnx2x_get_emac_base(bp, @@ -7302,12 +11147,12 @@ static u8 bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, return 0; } -static u8 bnx2x_populate_ext_phy(struct bnx2x *bp, - u8 phy_index, - u32 shmem_base, - u32 shmem2_base, - u8 port, - struct bnx2x_phy *phy) +static int bnx2x_populate_ext_phy(struct bnx2x *bp, + u8 phy_index, + u32 shmem_base, + u32 shmem2_base, + u8 port, + struct bnx2x_phy *phy) { u32 ext_phy_config, phy_type, config2; u32 mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH; @@ -7336,6 +11181,7 @@ static u8 bnx2x_populate_ext_phy(struct bnx2x *bp, *phy = phy_8727; phy->flags |= FLAGS_NOC; break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; *phy = phy_8727; @@ -7349,6 +11195,9 @@ static u8 bnx2x_populate_ext_phy(struct bnx2x *bp, case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: *phy = phy_84833; break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE: + *phy = phy_54618se; + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: *phy = phy_7101; break; @@ -7410,10 +11259,10 @@ static u8 bnx2x_populate_ext_phy(struct bnx2x *bp, return 0; } -static u8 bnx2x_populate_phy(struct bnx2x *bp, u8 phy_index, u32 shmem_base, - u32 shmem2_base, u8 port, struct bnx2x_phy *phy) +static int bnx2x_populate_phy(struct bnx2x *bp, u8 phy_index, u32 shmem_base, + u32 shmem2_base, u8 port, struct bnx2x_phy *phy) { - u8 status = 0; + int status = 0; phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN; if (phy_index == INT_PHY) return bnx2x_populate_int_phy(bp, shmem_base, port, phy); @@ -7527,10 +11376,10 @@ u32 bnx2x_phy_selection(struct link_params *params) } -u8 bnx2x_phy_probe(struct link_params *params) +int bnx2x_phy_probe(struct link_params *params) { u8 phy_index, actual_phy_idx, link_cfg_idx; - u32 phy_config_swapped; + u32 phy_config_swapped, sync_offset, media_types; struct bnx2x *bp = params->bp; struct bnx2x_phy *phy; params->num_phys = 0; @@ -7567,6 +11416,26 @@ u8 bnx2x_phy_probe(struct link_params *params) if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) break; + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(bp, sync_offset); + + /* + * Update media type for non-PMF sync only for the first time + * In case the media type changes afterwards, it will be updated + * using the update_status function + */ + if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx))) == 0) { + media_types |= ((phy->media_type & + PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx)); + } + REG_WR(bp, sync_offset, media_types); + bnx2x_phy_def_cfg(params, phy, phy_index); params->num_phys++; } @@ -7575,77 +11444,10 @@ u8 bnx2x_phy_probe(struct link_params *params) return 0; } -static void set_phy_vars(struct link_params *params) -{ - struct bnx2x *bp = params->bp; - u8 actual_phy_idx, phy_index, link_cfg_idx; - u8 phy_config_swapped = params->multi_phy_config & - PORT_HW_CFG_PHY_SWAPPED_ENABLED; - for (phy_index = INT_PHY; phy_index < params->num_phys; - phy_index++) { - link_cfg_idx = LINK_CONFIG_IDX(phy_index); - actual_phy_idx = phy_index; - if (phy_config_swapped) { - if (phy_index == EXT_PHY1) - actual_phy_idx = EXT_PHY2; - else if (phy_index == EXT_PHY2) - actual_phy_idx = EXT_PHY1; - } - params->phy[actual_phy_idx].req_flow_ctrl = - params->req_flow_ctrl[link_cfg_idx]; - - params->phy[actual_phy_idx].req_line_speed = - params->req_line_speed[link_cfg_idx]; - - params->phy[actual_phy_idx].speed_cap_mask = - params->speed_cap_mask[link_cfg_idx]; - - params->phy[actual_phy_idx].req_duplex = - params->req_duplex[link_cfg_idx]; - - DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x," - " speed_cap_mask %x\n", - params->phy[actual_phy_idx].req_flow_ctrl, - params->phy[actual_phy_idx].req_line_speed, - params->phy[actual_phy_idx].speed_cap_mask); - } -} - -u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) +void bnx2x_init_bmac_loopback(struct link_params *params, + struct link_vars *vars) { struct bnx2x *bp = params->bp; - DP(NETIF_MSG_LINK, "Phy Initialization started\n"); - DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n", - params->req_line_speed[0], params->req_flow_ctrl[0]); - DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", - params->req_line_speed[1], params->req_flow_ctrl[1]); - vars->link_status = 0; - vars->phy_link_up = 0; - vars->link_up = 0; - vars->line_speed = 0; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->mac_type = MAC_TYPE_NONE; - vars->phy_flags = 0; - - /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G | - NIG_MASK_SERDES0_LINK_STATUS | - NIG_MASK_MI_INT)); - - bnx2x_emac_init(params, vars); - - if (params->num_phys == 0) { - DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); - return -EINVAL; - } - set_phy_vars(params); - - DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); - if (params->loopback_mode == LOOPBACK_BMAC) { - vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -7660,9 +11462,12 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_bmac_enable(params, vars, 1); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} - } else if (params->loopback_mode == LOOPBACK_EMAC) { - +void bnx2x_init_emac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; vars->link_up = 1; vars->line_speed = SPEED_1000; vars->duplex = DUPLEX_FULL; @@ -7676,29 +11481,81 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_enable(params, vars, 1); bnx2x_emac_program(params, vars); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} - } else if ((params->loopback_mode == LOOPBACK_XGXS) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { +void bnx2x_init_xmac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + if (!params->req_line_speed[0]) + vars->line_speed = SPEED_10000; + else + vars->line_speed = params->req_line_speed[0]; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_XMAC; + vars->phy_flags = PHY_XGXS_FLAG; + /* + * Set WC to loopback mode since link is required to provide clock + * to the XMAC in 20G mode + */ + if (vars->line_speed == SPEED_20000) { + bnx2x_set_aer_mmd(params, ¶ms->phy[0]); + bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); + params->phy[INT_PHY].config_loopback( + ¶ms->phy[INT_PHY], + params); + } + bnx2x_xmac_enable(params, vars, 1); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +void bnx2x_init_umac_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + vars->link_up = 1; + vars->line_speed = SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_UMAC; + vars->phy_flags = PHY_XGXS_FLAG; + bnx2x_umac_enable(params, vars, 1); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); +} + +void bnx2x_init_xgxs_loopback(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; vars->link_up = 1; vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->duplex = DUPLEX_FULL; - if (params->req_line_speed[0] == SPEED_1000) { + if (params->req_line_speed[0] == SPEED_1000) vars->line_speed = SPEED_1000; - vars->mac_type = MAC_TYPE_EMAC; - } else { + else vars->line_speed = SPEED_10000; - vars->mac_type = MAC_TYPE_BMAC; - } + if (!USES_WARPCORE(bp)) bnx2x_xgxs_deassert(params); - bnx2x_link_initialize(params, vars); + bnx2x_link_initialize(params, vars); - if (params->req_line_speed[0] == SPEED_1000) { + if (params->req_line_speed[0] == SPEED_1000) { + if (USES_WARPCORE(bp)) + bnx2x_umac_enable(params, vars, 0); + else { bnx2x_emac_program(params, vars); bnx2x_emac_enable(params, vars, 0); - } else + } + } else { + if (USES_WARPCORE(bp)) + bnx2x_xmac_enable(params, vars, 0); + else bnx2x_bmac_enable(params, vars, 0); + } + if (params->loopback_mode == LOOPBACK_XGXS) { /* set 10G XGXS loopback */ params->phy[INT_PHY].config_loopback( @@ -7718,24 +11575,76 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) } REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); - bnx2x_set_led(params, vars, - LED_MODE_OPER, vars->line_speed); - } else - /* No loopback */ - { - if (params->switch_cfg == SWITCH_CFG_10G) - bnx2x_xgxs_deassert(params); - else - bnx2x_serdes_deassert(bp, params->port); + bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed); +} +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + DP(NETIF_MSG_LINK, "Phy Initialization started\n"); + DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n", + params->req_line_speed[0], params->req_flow_ctrl[0]); + DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", + params->req_line_speed[1], params->req_flow_ctrl[1]); + vars->link_status = 0; + vars->phy_link_up = 0; + vars->link_up = 0; + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; + vars->mac_type = MAC_TYPE_NONE; + vars->phy_flags = 0; + + /* disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + bnx2x_emac_init(params, vars); + + if (params->num_phys == 0) { + DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); + return -EINVAL; + } + set_phy_vars(params, vars); + + DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); + switch (params->loopback_mode) { + case LOOPBACK_BMAC: + bnx2x_init_bmac_loopback(params, vars); + break; + case LOOPBACK_EMAC: + bnx2x_init_emac_loopback(params, vars); + break; + case LOOPBACK_XMAC: + bnx2x_init_xmac_loopback(params, vars); + break; + case LOOPBACK_UMAC: + bnx2x_init_umac_loopback(params, vars); + break; + case LOOPBACK_XGXS: + case LOOPBACK_EXT_PHY: + bnx2x_init_xgxs_loopback(params, vars); + break; + default: + if (!CHIP_IS_E3(bp)) { + if (params->switch_cfg == SWITCH_CFG_10G) + bnx2x_xgxs_deassert(params); + else + bnx2x_serdes_deassert(bp, params->port); + } bnx2x_link_initialize(params, vars); msleep(30); bnx2x_link_int_enable(params); + break; } return 0; } -u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy) + +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy) { struct bnx2x *bp = params->bp; u8 phy_index, port = params->port, clear_latch_ind = 0; @@ -7753,14 +11662,19 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); /* disable nig egress interface */ - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + if (!CHIP_IS_E3(bp)) { + REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + } /* Stop BigMac rx */ - bnx2x_bmac_rx_disable(bp, port); - + if (!CHIP_IS_E3(bp)) + bnx2x_bmac_rx_disable(bp, port); + else + bnx2x_xmac_disable(params); /* disable emac */ - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); msleep(10); /* The PHY reset is controlled by GPIO 1 @@ -7796,21 +11710,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); /* disable nig ingress interface */ - REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); - REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0); - REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + if (!CHIP_IS_E3(bp)) { + REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0); + REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0); + } vars->link_up = 0; + vars->phy_flags = 0; return 0; } /****************************************************************************/ /* Common function */ /****************************************************************************/ -static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) +static int bnx2x_8073_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) { struct bnx2x_phy phy[PORT_MAX]; struct bnx2x_phy *phy_blk[PORT_MAX]; @@ -7826,14 +11741,14 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, for (port = PORT_MAX - 1; port >= PORT_0; port--) { u32 shmem_base, shmem2_base; /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E2(bp)) { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - port_of_path = 0; - } else { + if (CHIP_IS_E1x(bp)) { shmem_base = shmem_base_path[0]; shmem2_base = shmem2_base_path[0]; port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; } /* Extract the ext phy address for the port */ @@ -7877,10 +11792,10 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, /* PART2 - Download firmware to both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { - if (CHIP_IS_E2(bp)) - port_of_path = 0; - else + if (CHIP_IS_E1x(bp)) port_of_path = port; + else + port_of_path = 0; DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", phy_blk[port]->addr); @@ -7933,10 +11848,10 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, } return 0; } -static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) +static int bnx2x_8726_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) { u32 val; s8 port; @@ -7954,12 +11869,12 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base, shmem2_base; /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E2(bp)) { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - } else { + if (CHIP_IS_E1x(bp)) { shmem_base = shmem_base_path[0]; shmem2_base = shmem2_base_path[0]; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; } /* Extract the ext phy address for the port */ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, @@ -8027,10 +11942,11 @@ static void bnx2x_get_ext_phy_reset_gpio(struct bnx2x *bp, u32 shmem_base, break; } } -static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, - u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 chip_id) + +static int bnx2x_8727_common_init_phy(struct bnx2x *bp, + u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 chip_id) { s8 port, reset_gpio; u32 swap_val, swap_override; @@ -8067,14 +11983,14 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base, shmem2_base; /* In E2, same phy is using for port0 of the two paths */ - if (CHIP_IS_E2(bp)) { - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - port_of_path = 0; - } else { + if (CHIP_IS_E1x(bp)) { shmem_base = shmem_base_path[0]; shmem2_base = shmem2_base_path[0]; port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; } /* Extract the ext phy address for the port */ @@ -8109,25 +12025,29 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, } /* PART2 - Download firmware to both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { - if (CHIP_IS_E2(bp)) - port_of_path = 0; - else + if (CHIP_IS_E1x(bp)) port_of_path = port; + else + port_of_path = 0; DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", phy_blk[port]->addr); if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], port_of_path)) return -EINVAL; + /* Disable PHY transmitter output */ + bnx2x_cl45_write(bp, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_DISABLE, 1); } return 0; } -static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u8 phy_index, - u32 ext_phy_type, u32 chip_id) +static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u8 phy_index, + u32 ext_phy_type, u32 chip_id) { - u8 rc = 0; + int rc = 0; switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: @@ -8135,7 +12055,7 @@ static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], shmem2_base_path, phy_index, chip_id); break; - + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: rc = bnx2x_8727_common_init_phy(bp, shmem_base_path, @@ -8152,6 +12072,13 @@ static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], shmem2_base_path, phy_index, chip_id); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: + /* + * GPIO3's are linked, and so both need to be toggled + * to obtain required 2us pulse. + */ + rc = bnx2x_84833_common_init_phy(bp, shmem_base_path, chip_id); + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: rc = -EINVAL; break; @@ -8169,15 +12096,21 @@ static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], return rc; } -u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u32 chip_id) +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id) { - u8 rc = 0; - u32 phy_ver; - u8 phy_index; + int rc = 0; + u32 phy_ver, val; + u8 phy_index = 0; u32 ext_phy_type, ext_phy_config; + bnx2x_set_mdio_clk(bp, chip_id, PORT_0); + bnx2x_set_mdio_clk(bp, chip_id, PORT_1); DP(NETIF_MSG_LINK, "Begin common phy init\n"); - + if (CHIP_IS_E3(bp)) { + /* Enable EPIO */ + val = REG_RD(bp, MISC_REG_GEN_PURP_HWG); + REG_WR(bp, MISC_REG_GEN_PURP_HWG, val | 1); + } /* Check if common init was already done */ phy_ver = REG_RD(bp, shmem_base_path[0] + offsetof(struct shmem_region, @@ -8203,6 +12136,135 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], return rc; } +static void bnx2x_check_over_curr(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin; + u8 port = params->port; + u32 pin_val; + + cfg_pin = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg1)) & + PORT_HW_CFG_E3_OVER_CURRENT_MASK) >> + PORT_HW_CFG_E3_OVER_CURRENT_SHIFT; + + /* Ignore check if no external input PIN available */ + if (bnx2x_get_cfg_pin(bp, cfg_pin, &pin_val) != 0) + return; + + if (!pin_val) { + if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) { + netdev_err(bp->dev, "Error: Power fault on Port %d has" + " been detected and the power to " + "that SFP+ module has been removed" + " to prevent failure of the card." + " Please remove the SFP+ module and" + " restart the system to clear this" + " error.\n", + params->port); + vars->phy_flags |= PHY_OVER_CURRENT_FLAG; + } + } else + vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; +} + +static void bnx2x_analyze_link_error(struct link_params *params, + struct link_vars *vars, u32 lss_status) +{ + struct bnx2x *bp = params->bp; + /* Compare new value with previous value */ + u8 led_mode; + u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0; + + /*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n", + vars->link_up, + half_open_conn, lss_status);*/ + + if ((lss_status ^ half_open_conn) == 0) + return; + + /* If values differ */ + DP(NETIF_MSG_LINK, "Link changed:%x %x->%x\n", vars->link_up, + half_open_conn, lss_status); + + /* + * a. Update shmem->link_status accordingly + * b. Update link_vars->link_up + */ + if (lss_status) { + vars->link_status &= ~LINK_STATUS_LINK_UP; + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + /* + * Set LED mode to off since the PHY doesn't know about these + * errors + */ + led_mode = LED_MODE_OFF; + } else { + vars->link_status |= LINK_STATUS_LINK_UP; + vars->link_up = 1; + vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + led_mode = LED_MODE_OPER; + } + /* Update the LED according to the link state */ + bnx2x_set_led(params, vars, led_mode, SPEED_10000); + + /* Update link status in the shared memory */ + bnx2x_update_mng(params, vars->link_status); + + /* C. Trigger General Attention */ + vars->periodic_flags |= PERIODIC_FLAGS_LINK_EVENT; + bnx2x_notify_link_changed(bp); +} + +static void bnx2x_check_half_open_conn(struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 lss_status = 0; + u32 mac_base; + /* In case link status is physically up @ 10G do */ + if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) + return; + + if (!CHIP_IS_E3(bp) && + (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) { + /* Check E1X / E2 BMAC */ + u32 lss_status_reg; + u32 wb_data[2]; + mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + /* Read BIGMAC_REGISTER_RX_LSS_STATUS */ + if (CHIP_IS_E2(bp)) + lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT; + else + lss_status_reg = BIGMAC_REGISTER_RX_LSS_STATUS; + + REG_RD_DMAE(bp, mac_base + lss_status_reg, wb_data, 2); + lss_status = (wb_data[0] > 0); + + bnx2x_analyze_link_error(params, vars, lss_status); + } +} + +void bnx2x_period_func(struct link_params *params, struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + if (!params) { + DP(NETIF_MSG_LINK, "Ininitliazed params !\n"); + return; + } + /* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x + RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed, + REG_RD(bp, MISC_REG_RESET_REG_2)); */ + bnx2x_check_half_open_conn(params, vars); + if (CHIP_IS_E3(bp)) + bnx2x_check_over_curr(params, vars); +} + u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base) { u8 phy_index; @@ -8245,7 +12307,15 @@ u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, void bnx2x_hw_reset_phy(struct link_params *params) { u8 phy_index; - for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; + struct bnx2x *bp = params->bp; + bnx2x_update_mng(params, 0); + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + for (phy_index = INT_PHY; phy_index < MAX_PHYS; phy_index++) { if (params->phy[phy_index].hw_reset) { params->phy[phy_index].hw_reset( @@ -8255,3 +12325,72 @@ void bnx2x_hw_reset_phy(struct link_params *params) } } } + +void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, + u32 chip_id, u32 shmem_base, u32 shmem2_base, + u8 port) +{ + u8 gpio_num = 0xff, gpio_port = 0xff, phy_index; + u32 val; + u32 offset, aeu_mask, swap_val, swap_override, sync_offset; + if (CHIP_IS_E3(bp)) { + if (bnx2x_get_mod_abs_int_cfg(bp, chip_id, + shmem_base, + port, + &gpio_num, + &gpio_port) != 0) + return; + } else { + struct bnx2x_phy phy; + for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; + phy_index++) { + if (bnx2x_populate_phy(bp, phy_index, shmem_base, + shmem2_base, port, &phy) + != 0) { + DP(NETIF_MSG_LINK, "populate phy failed\n"); + return; + } + if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) { + gpio_num = MISC_REGISTERS_GPIO_3; + gpio_port = port; + break; + } + } + } + + if (gpio_num == 0xff) + return; + + /* Set GPIO3 to trigger SFP+ module insertion/removal */ + bnx2x_set_gpio(bp, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, gpio_port); + + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + gpio_port ^= (swap_val && swap_override); + + vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 << + (gpio_num + (gpio_port << 2)); + + sync_offset = shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + REG_WR(bp, sync_offset, vars->aeu_int_mask); + + DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n", + gpio_num, gpio_port, vars->aeu_int_mask); + + if (port == 0) + offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; + else + offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; + + /* Open appropriate AEU for interrupts */ + aeu_mask = REG_RD(bp, offset); + aeu_mask |= vars->aeu_int_mask; + REG_WR(bp, offset, aeu_mask); + + /* Enable the GPIO to trigger interrupt */ + val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); + val |= 1 << (gpio_num + (gpio_port << 2)); + REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); +} |