diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 127 |
1 files changed, 85 insertions, 42 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d9107e542dfa..7d170cd381c3 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -166,16 +166,6 @@ config NET_SB1000 If you don't have this card, of course say N. -config IP1000 - tristate "IP1000 Gigabit Ethernet support" - depends on PCI && EXPERIMENTAL - select MII - ---help--- - This driver supports IP1000 gigabit Ethernet cards. - - To compile this driver as a module, choose M here: the module - will be called ipg. This is recommended. - source "drivers/net/arcnet/Kconfig" source "drivers/net/phy/Kconfig" @@ -222,7 +212,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -824,8 +814,8 @@ config ULTRA32 will be called smc-ultra32. config BFIN_MAC - tristate "Blackfin 536/537 on-chip mac support" - depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H) + tristate "Blackfin 527/536/537 on-chip mac support" + depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H) select CRC32 select MII select PHYLIB @@ -838,7 +828,7 @@ config BFIN_MAC config BFIN_MAC_USE_L1 bool "Use L1 memory for rx/tx packets" - depends on BFIN_MAC && BF537 + depends on BFIN_MAC && (BF527 || BF537) default y help To get maximum network performance, you should use L1 memory as rx/tx buffers. @@ -865,7 +855,8 @@ config BFIN_RX_DESC_NUM config BFIN_MAC_RMII bool "RMII PHY Interface (EXPERIMENTAL)" depends on BFIN_MAC && EXPERIMENTAL - default n + default y if BFIN527_EZKIT + default n if BFIN537_STAMP help Use Reduced PHY MII Interface @@ -922,6 +913,23 @@ config DM9000 To compile this driver as a module, choose M here. The module will be called dm9000. +config ENC28J60 + tristate "ENC28J60 support" + depends on EXPERIMENTAL && SPI && NET_ETHERNET + select CRC32 + ---help--- + Support for the Microchip EN28J60 ethernet chip. + + To compile this driver as a module, choose M here. The module will be + called enc28j60. + +config ENC28J60_WRITEVERIFY + bool "Enable write verify" + depends on ENC28J60 + ---help--- + Enable the verify after the buffer write useful for debugging purpose. + If unsure, say N. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 @@ -1191,7 +1199,7 @@ config NE2_MCA config IBMLANA tristate "IBM LAN Adapter/A support" - depends on MCA && MCA_LEGACY + depends on MCA ---help--- This is a Micro Channel Ethernet adapter. You need to set CONFIG_MCA to use this driver. It is both available as an in-kernel @@ -1594,6 +1602,18 @@ config 8139_OLD_RX_RESET experience problems, you can enable this option to restore the old RX-reset behavior. If unsure, say N. +config R6040 + tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This is a driver for the R6040 Fast Ethernet MACs found in the + the RDC R-321x System-on-chips. + + To compile this driver as a module, choose M here: the module + will be called r6040. This is recommended. + config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI @@ -1795,7 +1815,7 @@ config DE620 config SGISEEQ tristate "SGI Seeq ethernet controller support" - depends on SGI_IP22 + depends on SGI_HAS_SEEQ help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. @@ -1986,12 +2006,43 @@ config E1000E <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/e1000e.txt>. - To compile this driver as a module, choose M here. The module will be called e1000e. +config E1000E_ENABLED + def_bool E1000E != n + +config IP1000 + tristate "IP1000 Gigabit Ethernet support" + depends on PCI && EXPERIMENTAL + select MII + ---help--- + This driver supports IP1000 gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called ipg. This is recommended. + +config IGB + tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igb. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS @@ -2304,7 +2355,7 @@ config GELIC_NET config GIANFAR tristate "Gianfar Ethernet" - depends on 85xx || 83xx || PPC_86xx + depends on FSL_SOC select PHYLIB select CRC32 help @@ -2468,9 +2519,6 @@ config IXGBE <http://support.intel.com> - More specific information on configuring the driver is in - <file:Documentation/networking/ixgbe.txt>. - To compile this driver as a module, choose M here. The module will be called ixgbe. @@ -2566,6 +2614,7 @@ config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC64 && PCI select PHYLIB + select INET_LRO help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. @@ -2591,6 +2640,16 @@ config TEHUTI help Tehuti Networks 10G Ethernet NIC +config BNX2X + tristate "Broadcom NetXtremeII 10Gb support" + depends on PCI + select ZLIB_INFLATE + help + This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + + endif # NETDEV_10000 source "drivers/net/tokenring/Kconfig" @@ -3021,23 +3080,6 @@ config NET_FC adaptor below. You also should have said Y to "SCSI support" and "SCSI generic support". -config SHAPER - tristate "Traffic Shaper (OBSOLETE)" - depends on EXPERIMENTAL - ---help--- - The traffic shaper is a virtual network device that allows you to - limit the rate of outgoing data flow over some other network device. - The traffic that you want to slow down can then be routed through - these virtual devices. See - <file:Documentation/networking/shaper.txt> for more information. - - An alternative to this traffic shaper are traffic schedulers which - you'll get if you say Y to "QoS and/or fair queuing" in - "Networking options". - - To compile this driver as a module, choose M here: the module - will be called shaper. If unsure, say N. - config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -3070,6 +3112,7 @@ config VIRTIO_NET tristate "Virtio network driver (EXPERIMENTAL)" depends on EXPERIMENTAL && VIRTIO ---help--- - This is the virtual network driver for lguest. Say Y or M. + This is the virtual network driver for virtio. It can be used with + lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. endif # NETDEVICES |