summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/mtd_blkdevs.c1
-rw-r--r--drivers/mtd/nand/atmel/nand-controller.c15
-rw-r--r--drivers/mtd/nand/atmel/pmecc.c21
-rw-r--r--drivers/mtd/nand/nand_base.c13
-rw-r--r--drivers/mtd/nand/nand_timings.c6
-rw-r--r--drivers/mtd/nand/nandsim.c1
-rw-r--r--drivers/mtd/nand/sunxi_nand.c4
7 files changed, 38 insertions, 23 deletions
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index f336a9b85576..9ec8f033ac5f 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -113,6 +113,7 @@ static blk_status_t do_blktrans_request(struct mtd_blktrans_ops *tr,
for (; nsect > 0; nsect--, block++, buf += tr->blksize)
if (tr->writesect(dev, block, buf))
return BLK_STS_IOERR;
+ return BLK_STS_OK;
default:
return BLK_STS_IOERR;
}
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index d922a88e407f..ceec21bd30c4 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -1201,7 +1201,7 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
* tRC < 30ns implies EDO mode. This controller does not support this
* mode.
*/
- if (conf->timings.sdr.tRC_min < 30)
+ if (conf->timings.sdr.tRC_min < 30000)
return -ENOTSUPP;
atmel_smc_cs_conf_init(smcconf);
@@ -1364,7 +1364,18 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
ret = atmel_smc_cs_conf_set_timing(smcconf,
ATMEL_HSMC_TIMINGS_TADL_SHIFT,
ncycles);
- if (ret)
+ /*
+ * Version 4 of the ONFI spec mandates that tADL be at least 400
+ * nanoseconds, but, depending on the master clock rate, 400 ns may not
+ * fit in the tADL field of the SMC reg. We need to relax the check and
+ * accept the -ERANGE return code.
+ *
+ * Note that previous versions of the ONFI spec had a lower tADL_min
+ * (100 or 200 ns). It's not clear why this timing constraint got
+ * increased but it seems most NANDs are fine with values lower than
+ * 400ns, so we should be safe.
+ */
+ if (ret && ret != -ERANGE)
return ret;
ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);
diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c
index 55a8ee5306ea..8c210a5776bc 100644
--- a/drivers/mtd/nand/atmel/pmecc.c
+++ b/drivers/mtd/nand/atmel/pmecc.c
@@ -945,6 +945,7 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
*/
struct platform_device *pdev = to_platform_device(userdev);
const struct atmel_pmecc_caps *caps;
+ const struct of_device_id *match;
/* No PMECC engine available. */
if (!of_property_read_bool(userdev->of_node,
@@ -953,21 +954,11 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
caps = &at91sam9g45_caps;
- /*
- * Try to find the NFC subnode and extract the associated caps
- * from there.
- */
- np = of_find_compatible_node(userdev->of_node, NULL,
- "atmel,sama5d3-nfc");
- if (np) {
- const struct of_device_id *match;
-
- match = of_match_node(atmel_pmecc_legacy_match, np);
- if (match && match->data)
- caps = match->data;
-
- of_node_put(np);
- }
+ /* Find the caps associated to the NAND dev node. */
+ match = of_match_node(atmel_pmecc_legacy_match,
+ userdev->of_node);
+ if (match && match->data)
+ caps = match->data;
pmecc = atmel_pmecc_create(pdev, caps, 1, 2);
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5fa5ddc94834..c6c18b82f8f4 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -65,8 +65,14 @@ static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
if (!section) {
oobregion->offset = 0;
- oobregion->length = 4;
+ if (mtd->oobsize == 16)
+ oobregion->length = 4;
+ else
+ oobregion->length = 3;
} else {
+ if (mtd->oobsize == 8)
+ return -ERANGE;
+
oobregion->offset = 6;
oobregion->length = ecc->total - 4;
}
@@ -1125,7 +1131,9 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
* Ensure the timing mode has been changed on the chip side
* before changing timings on the controller side.
*/
- if (chip->onfi_version) {
+ if (chip->onfi_version &&
+ (le16_to_cpu(chip->onfi_params.opt_cmd) &
+ ONFI_OPT_CMD_SET_GET_FEATURES)) {
u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
chip->onfi_timing_mode_default,
};
@@ -2741,7 +2749,6 @@ static int nand_write_page_syndrome(struct mtd_info *mtd,
* @buf: the data to write
* @oob_required: must write chip->oob_poi to OOB
* @page: page number to write
- * @cached: cached programming
* @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
index f06312df3669..7e36d7d13c26 100644
--- a/drivers/mtd/nand/nand_timings.c
+++ b/drivers/mtd/nand/nand_timings.c
@@ -311,9 +311,9 @@ int onfi_init_data_interface(struct nand_chip *chip,
struct nand_sdr_timings *timings = &iface->timings.sdr;
/* microseconds -> picoseconds */
- timings->tPROG_max = 1000000UL * le16_to_cpu(params->t_prog);
- timings->tBERS_max = 1000000UL * le16_to_cpu(params->t_bers);
- timings->tR_max = 1000000UL * le16_to_cpu(params->t_r);
+ timings->tPROG_max = 1000000ULL * le16_to_cpu(params->t_prog);
+ timings->tBERS_max = 1000000ULL * le16_to_cpu(params->t_bers);
+ timings->tR_max = 1000000ULL * le16_to_cpu(params->t_r);
/* nanoseconds -> picoseconds */
timings->tCCS_min = 1000UL * le16_to_cpu(params->t_ccs);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 03a0d057bf2f..e4211c3cc49b 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2373,6 +2373,7 @@ static int __init ns_init_module(void)
return 0;
err_exit:
+ nandsim_debugfs_remove(nand);
free_nandsim(nand);
nand_release(nsmtd);
for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index d0b6f8f9f297..6abd142b1324 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1728,6 +1728,10 @@ static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
*/
chip->clk_rate = NSEC_PER_SEC / min_clk_period;
real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate);
+ if (real_clk_rate <= 0) {
+ dev_err(nfc->dev, "Unable to round clk %lu\n", chip->clk_rate);
+ return -EINVAL;
+ }
/*
* ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 13:30:43 +0300