diff options
Diffstat (limited to 'drivers/mtd/maps/ixp4xx.c')
| -rw-r--r-- | drivers/mtd/maps/ixp4xx.c | 262 |
1 files changed, 0 insertions, 262 deletions
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c deleted file mode 100644 index d8543201ab94..000000000000 --- a/drivers/mtd/maps/ixp4xx.c +++ /dev/null @@ -1,262 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/mtd/maps/ixp4xx.c - * - * MTD Map file for IXP4XX based systems. Please do not make per-board - * changes in here. If your board needs special setup, do it in your - * platform level code in arch/arm/mach-ixp4xx/board-setup.c - * - * Original Author: Intel Corporation - * Maintainer: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright (C) 2002 Intel Corporation - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - */ - -#include <linux/err.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/mach/flash.h> - -#include <linux/reboot.h> - -/* - * Read/write a 16 bit word from flash address 'addr'. - * - * When the cpu is in little-endian mode it swizzles the address lines - * ('address coherency') so we need to undo the swizzling to ensure commands - * and the like end up on the correct flash address. - * - * To further complicate matters, due to the way the expansion bus controller - * handles 32 bit reads, the byte stream ABCD is stored on the flash as: - * D15 D0 - * +---+---+ - * | A | B | 0 - * +---+---+ - * | C | D | 2 - * +---+---+ - * This means that on LE systems each 16 bit word must be swapped. Note that - * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI - * data and other flash commands which are always in D7-D0. - */ -#ifndef __ARMEB__ -#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP -# error CONFIG_MTD_CFI_BE_BYTE_SWAP required -#endif - -static inline u16 flash_read16(void __iomem *addr) -{ - return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2))); -} - -static inline void flash_write16(u16 d, void __iomem *addr) -{ - __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2)); -} - -#define BYTE0(h) ((h) & 0xFF) -#define BYTE1(h) (((h) >> 8) & 0xFF) - -#else - -static inline u16 flash_read16(const void __iomem *addr) -{ - return __raw_readw(addr); -} - -static inline void flash_write16(u16 d, void __iomem *addr) -{ - __raw_writew(d, addr); -} - -#define BYTE0(h) (((h) >> 8) & 0xFF) -#define BYTE1(h) ((h) & 0xFF) -#endif - -static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) -{ - map_word val; - val.x[0] = flash_read16(map->virt + ofs); - return val; -} - -/* - * The IXP4xx expansion bus only allows 16-bit wide acceses - * when attached to a 16-bit wide device (such as the 28F128J3A), - * so we can't just memcpy_fromio(). - */ -static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) -{ - u8 *dest = (u8 *) to; - void __iomem *src = map->virt + from; - - if (len <= 0) - return; - - if (from & 1) { - *dest++ = BYTE1(flash_read16(src-1)); - src++; - --len; - } - - while (len >= 2) { - u16 data = flash_read16(src); - *dest++ = BYTE0(data); - *dest++ = BYTE1(data); - src += 2; - len -= 2; - } - - if (len > 0) - *dest++ = BYTE0(flash_read16(src)); -} - -/* - * Unaligned writes are ignored, causing the 8-bit - * probe to fail and proceed to the 16-bit probe (which succeeds). - */ -static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) -{ - if (!(adr & 1)) - flash_write16(d.x[0], map->virt + adr); -} - -/* - * Fast write16 function without the probing check above - */ -static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) -{ - flash_write16(d.x[0], map->virt + adr); -} - -struct ixp4xx_flash_info { - struct mtd_info *mtd; - struct map_info map; - struct resource *res; -}; - -static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; - -static int ixp4xx_flash_remove(struct platform_device *dev) -{ - struct flash_platform_data *plat = dev_get_platdata(&dev->dev); - struct ixp4xx_flash_info *info = platform_get_drvdata(dev); - - if(!info) - return 0; - - if (info->mtd) { - mtd_device_unregister(info->mtd); - map_destroy(info->mtd); - } - - if (plat->exit) - plat->exit(); - - return 0; -} - -static int ixp4xx_flash_probe(struct platform_device *dev) -{ - struct flash_platform_data *plat = dev_get_platdata(&dev->dev); - struct ixp4xx_flash_info *info; - struct mtd_part_parser_data ppdata = { - .origin = dev->resource->start, - }; - int err = -1; - - if (!plat) - return -ENODEV; - - if (plat->init) { - err = plat->init(); - if (err) - return err; - } - - info = devm_kzalloc(&dev->dev, sizeof(struct ixp4xx_flash_info), - GFP_KERNEL); - if(!info) { - err = -ENOMEM; - goto Error; - } - - platform_set_drvdata(dev, info); - - /* - * Tell the MTD layer we're not 1:1 mapped so that it does - * not attempt to do a direct access on us. - */ - info->map.phys = NO_XIP; - info->map.size = resource_size(dev->resource); - - /* - * We only support 16-bit accesses for now. If and when - * any board use 8-bit access, we'll fixup the driver to - * handle that. - */ - info->map.bankwidth = 2; - info->map.name = dev_name(&dev->dev); - info->map.read = ixp4xx_read16; - info->map.write = ixp4xx_probe_write16; - info->map.copy_from = ixp4xx_copy_from; - - info->map.virt = devm_ioremap_resource(&dev->dev, dev->resource); - if (IS_ERR(info->map.virt)) { - err = PTR_ERR(info->map.virt); - goto Error; - } - - info->mtd = do_map_probe(plat->map_name, &info->map); - if (!info->mtd) { - printk(KERN_ERR "IXP4XXFlash: map_probe failed\n"); - err = -ENXIO; - goto Error; - } - info->mtd->dev.parent = &dev->dev; - - /* Use the fast version */ - info->map.write = ixp4xx_write16; - - err = mtd_device_parse_register(info->mtd, probes, &ppdata, - plat->parts, plat->nr_parts); - if (err) { - printk(KERN_ERR "Could not parse partitions\n"); - goto Error; - } - - return 0; - -Error: - ixp4xx_flash_remove(dev); - return err; -} - -static struct platform_driver ixp4xx_flash_driver = { - .probe = ixp4xx_flash_probe, - .remove = ixp4xx_flash_remove, - .driver = { - .name = "IXP4XX-Flash", - }, -}; - -module_platform_driver(ixp4xx_flash_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems"); -MODULE_AUTHOR("Deepak Saxena"); -MODULE_ALIAS("platform:IXP4XX-Flash"); |