diff options
Diffstat (limited to 'drivers/mtd/maps/Kconfig')
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 127 |
1 files changed, 46 insertions, 81 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 8480057eadb4..44781a83b2e7 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,5 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.42 2005/01/05 16:59:50 dwmw2 Exp $ +# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $ menu "Mapping drivers for chip access" depends on MTD!=n @@ -122,16 +122,6 @@ config MTD_SBC_GXX More info at <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>. -config MTD_ELAN_104NC - tristate "CFI Flash device mapped on Arcom ELAN-104NC" - depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS - help - This provides a driver for the on-board flash of the Arcom Control - System's ELAN-104NC development board. By default the flash - is split into 3 partitions which are accessed as separate MTD - devices. This board utilizes Intel StrataFlash. More info at - <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>. - config MTD_LUBBOCK tristate "CFI Flash device mapped on Intel Lubbock XScale eval board" depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS @@ -139,6 +129,14 @@ config MTD_LUBBOCK This provides a driver for the on-board flash of the Intel 'Lubbock' XScale evaluation board. +config MTD_MAINSTONE + tristate "CFI Flash device mapped on Intel Mainstone XScale eval board" + depends on MACH_MAINSTONE && MTD_CFI_INTELEXT + select MTD_PARTITIONS + help + This provides a driver for the on-board flash of the Intel + 'Mainstone PXA27x evaluation board. + config MTD_OCTAGON tristate "JEDEC Flash device mapped on Octagon 5066 SBC" depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS @@ -213,74 +211,11 @@ config MTD_NETtel help Support for flash chips on NETtel/SecureEdge/SnapGear boards. -config MTD_PB1XXX - tristate "Flash devices on Alchemy PB1xxx boards" - depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 ) - help - Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards - -config MTD_PB1XXX_BOOT - bool "PB1x00 boot flash device" - depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) - help - Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board. - You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use - both banks. - -config MTD_PB1XXX_USER - bool "PB1x00 user flash device" - depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) - default y if MTD_PB1XX_BOOT = n - help - Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board. - You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use - both banks. - -config MTD_PB1550 - tristate "Flash devices on Alchemy PB1550 board" - depends on MIPS && MIPS_PB1550 - help - Flash memory access on Alchemy Pb1550 board - -config MTD_PB1550_BOOT - bool "PB1550 boot flash device" - depends on MTD_PB1550 - help - Use the first of the two 64MiB flash banks on Pb1550 board. - You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use - both banks. - -config MTD_PB1550_USER - bool "PB1550 user flash device" - depends on MTD_PB1550 - default y if MTD_PB1550_BOOT = n - help - Use the second of the two 64MiB flash banks on Pb1550 board. - You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use - both banks. - -config MTD_DB1550 - tristate "Flash devices on Alchemy DB1550 board" - depends on MIPS && MIPS_DB1550 - help - Flash memory access on Alchemy Db1550 board - -config MTD_DB1550_BOOT - bool "DB1550 boot flash device" - depends on MTD_DB1550 - help - Use the first of the two 64MiB flash banks on Db1550 board. - You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use - both banks. - -config MTD_DB1550_USER - bool "DB1550 user flash device" - depends on MTD_DB1550 - default y if MTD_DB1550_BOOT = n +config MTD_ALCHEMY + tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' + depends on MIPS && SOC_AU1X00 help - Use the second of the two 64MiB flash banks on Db1550 board. - You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use - both banks. + Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" @@ -588,6 +523,15 @@ config MTD_MPC1211 This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). If you have such a board, say 'Y'. +config MTD_OMAP_NOR + tristate "TI OMAP board mappings" + depends on MTD_CFI && ARCH_OMAP + help + This enables access to the NOR flash chips on TI OMAP-based + boards defining flash platform devices and flash platform data. + These boards include the Innovator, H2, H3, OSK, Perseus2, and + more. If you have such a board, say 'Y'. + # This needs CFI or JEDEC, depending on the cards found. config MTD_PCI tristate "PCI MTD driver" @@ -607,6 +551,16 @@ config MTD_PCMCIA cards are usually around 4-16MiB in size. This does not include Compact Flash cards which are treated as IDE devices. +config MTD_PCMCIA_ANONYMOUS + bool "Use PCMCIA MTD drivers for anonymous PCMCIA cards" + depends on MTD_PCMCIA + default N + help + If this option is enabled, PCMCIA cards which do not report + anything about themselves are assumed to be MTD cards. + + If unsure, say N. + config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && !MMU @@ -637,13 +591,14 @@ config MTD_DMV182 Map driver for Dy-4 SVME/DMV-182 board. config MTD_BAST - tristate "Map driver for Simtec BAST (EB2410ITX)" - depends on ARCH_BAST + tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000" + depends on ARCH_BAST || MACH_VR1000 select MTD_PARTITIONS select MTD_MAP_BANK_WIDTH_16 select MTD_JEDECPROBE help - Map driver for NOR flash on the Simtec BAST (EB2410ITX). + Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the + Thorcom VR1000 Note, this driver *cannot* over-ride the WP link on the board, or currently detect the state of the link. @@ -659,5 +614,15 @@ config MTD_SHARP_SL help This enables access to the flash chip on the Sharp SL Series of PDAs. +config MTD_PLATRAM + tristate "Map driver for platform device RAM (mtd-ram)" + depends on MTD + select MTD_RAM + help + Map driver for RAM areas described via the platform device + system. + + This selection automatically selects the map_ram driver. + endmenu |