diff options
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r-- | drivers/mtd/devices/Kconfig | 7 | ||||
-rw-r--r-- | drivers/mtd/devices/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/devices/block2mtd.c | 28 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2000.c | 25 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001.c | 22 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001plus.c | 22 | ||||
-rw-r--r-- | drivers/mtd/devices/docg3.c | 201 | ||||
-rw-r--r-- | drivers/mtd/devices/docg3.h | 20 | ||||
-rw-r--r-- | drivers/mtd/devices/lart.c | 17 | ||||
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 56 | ||||
-rw-r--r-- | drivers/mtd/devices/ms02-nv.c | 12 | ||||
-rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 50 | ||||
-rw-r--r-- | drivers/mtd/devices/mtdram.c | 35 | ||||
-rw-r--r-- | drivers/mtd/devices/phram.c | 76 | ||||
-rw-r--r-- | drivers/mtd/devices/pmc551.c | 99 | ||||
-rw-r--r-- | drivers/mtd/devices/slram.c | 41 | ||||
-rw-r--r-- | drivers/mtd/devices/spear_smi.c | 1147 | ||||
-rw-r--r-- | drivers/mtd/devices/sst25l.c | 46 |
18 files changed, 1444 insertions, 461 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 8d3dac40d7e6..4cdb2af7bf44 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -103,6 +103,13 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SPEAR_SMI + tristate "SPEAR MTD NOR Support through SMI controller" + depends on PLAT_SPEAR + default y + help + This enable SNOR support on SPEAR platforms using SMI controller + config MTD_SST25L tristate "Support SST25L (non JEDEC) SPI Flash chips" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 56c7cd462f11..a4dd1d822b6c 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o CFLAGS_docg3.o += -I$(src)
\ No newline at end of file diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index e7e46d1e7463..a4a80b742e65 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -104,14 +104,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len, int offset = from & (PAGE_SIZE-1); int cpylen; - if (from > mtd->size) - return -EINVAL; - if (from + len > mtd->size) - len = mtd->size - from; - - if (retlen) - *retlen = 0; - while (len) { if ((offset + len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -148,8 +140,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf, int offset = to & ~PAGE_MASK; // page offset int cpylen; - if (retlen) - *retlen = 0; while (len) { if ((offset+len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -188,13 +178,6 @@ static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len, struct block2mtd_dev *dev = mtd->priv; int err; - if (!len) - return 0; - if (to >= mtd->size) - return -ENOSPC; - if (to + len > mtd->size) - len = mtd->size - to; - mutex_lock(&dev->write_mutex); err = _block2mtd_write(dev, buf, to, len, retlen); mutex_unlock(&dev->write_mutex); @@ -283,13 +266,14 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; dev->mtd.erasesize = erase_size; dev->mtd.writesize = 1; + dev->mtd.writebufsize = PAGE_SIZE; dev->mtd.type = MTD_RAM; dev->mtd.flags = MTD_CAP_RAM; - dev->mtd.erase = block2mtd_erase; - dev->mtd.write = block2mtd_write; - dev->mtd.writev = mtd_writev; - dev->mtd.sync = block2mtd_sync; - dev->mtd.read = block2mtd_read; + dev->mtd._erase = block2mtd_erase; + dev->mtd._write = block2mtd_write; + dev->mtd._writev = mtd_writev; + dev->mtd._sync = block2mtd_sync; + dev->mtd._read = block2mtd_read; dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index b1cdf6479019..a4eb8b5b85ec 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -562,14 +562,15 @@ void DoC2k_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; mutex_init(&this->lock); @@ -602,13 +603,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, int i, len256 = 0, ret=0; size_t left = len; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; @@ -748,13 +743,7 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, size_t left = len; int status; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 7543b98f46c4..f6927955dab0 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -346,14 +346,15 @@ void DoCMil_init(struct mtd_info *mtd) /* FIXME: erase size is not always 8KiB */ mtd->erasesize = 0x2000; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -383,10 +384,6 @@ static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -494,10 +491,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - #if 0 /* Don't allow a single write to cross a 512-byte block boundary */ if (to + len > ( (to | 0x1ff) + 1)) @@ -599,7 +592,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, printk("Error programming flash\n"); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, LastDataRead); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 177510d0e7ee..04eb2e4aa50f 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -467,14 +467,15 @@ void DoCMilPlus_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -581,10 +582,6 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -700,10 +697,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - /* Don't allow writes which aren't exactly one block (512 bytes) */ if ((to & 0x1ff) || (len != 0x200)) return -EINVAL; @@ -800,7 +793,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, Mplus_LastDataRead); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index ad11ef0a81f4..8272c02668d6 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -80,14 +80,9 @@ static struct nand_ecclayout docg3_oobinfo = { .oobavail = 8, }; -/** - * struct docg3_bch - BCH engine - */ -static struct bch_control *docg3_bch; - static inline u8 doc_readb(struct docg3 *docg3, u16 reg) { - u8 val = readb(docg3->base + reg); + u8 val = readb(docg3->cascade->base + reg); trace_docg3_io(0, 8, reg, (int)val); return val; @@ -95,7 +90,7 @@ static inline u8 doc_readb(struct docg3 *docg3, u16 reg) static inline u16 doc_readw(struct docg3 *docg3, u16 reg) { - u16 val = readw(docg3->base + reg); + u16 val = readw(docg3->cascade->base + reg); trace_docg3_io(0, 16, reg, (int)val); return val; @@ -103,13 +98,13 @@ static inline u16 doc_readw(struct docg3 *docg3, u16 reg) static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg) { - writeb(val, docg3->base + reg); + writeb(val, docg3->cascade->base + reg); trace_docg3_io(1, 8, reg, val); } static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg) { - writew(val, docg3->base + reg); + writew(val, docg3->cascade->base + reg); trace_docg3_io(1, 16, reg, val); } @@ -643,7 +638,8 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc) for (i = 0; i < DOC_ECC_BCH_SIZE; i++) ecc[i] = bitrev8(hwecc[i]); - numerrs = decode_bch(docg3_bch, NULL, DOC_ECC_BCH_COVERED_BYTES, + numerrs = decode_bch(docg3->cascade->bch, NULL, + DOC_ECC_BCH_COVERED_BYTES, NULL, ecc, NULL, errorpos); BUG_ON(numerrs == -EINVAL); if (numerrs < 0) @@ -734,7 +730,7 @@ err: * doc_read_page_getbytes - Reads bytes from a prepared page * @docg3: the device * @len: the number of bytes to be read (must be a multiple of 4) - * @buf: the buffer to be filled in + * @buf: the buffer to be filled in (or NULL is forget bytes) * @first: 1 if first time read, DOC_READADDRESS should be set * */ @@ -849,7 +845,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, ofs = 0; + int block0, block1, page, ret, skip, ofs = 0; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen, nbdata, nboob; @@ -869,34 +865,36 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n", from, ops->mode, buf, len, oobbuf, ooblen); - if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % DOC_LAYOUT_OOB_SIZE) || - (from % DOC_LAYOUT_PAGE_SIZE)) + if (ooblen % DOC_LAYOUT_OOB_SIZE) return -EINVAL; - ret = -EINVAL; - calc_block_sector(from + len, &block0, &block1, &page, &ofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (from + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; ret = 0; + skip = from % DOC_LAYOUT_PAGE_SIZE; + mutex_lock(&docg3->cascade->lock); while (!ret && (len > 0 || ooblen > 0)) { - calc_block_sector(from, &block0, &block1, &page, &ofs, + calc_block_sector(from - skip, &block0, &block1, &page, &ofs, docg3->reliable); - nbdata = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); + nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip); nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE); ret = doc_read_page_prepare(docg3, block0, block1, page, ofs); if (ret < 0) - goto err; + goto out; ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES); if (ret < 0) goto err_in_read; - ret = doc_read_page_getbytes(docg3, nbdata, buf, 1); + ret = doc_read_page_getbytes(docg3, skip, NULL, 1); + if (ret < skip) + goto err_in_read; + ret = doc_read_page_getbytes(docg3, nbdata, buf, 0); if (ret < nbdata) goto err_in_read; - doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata, + doc_read_page_getbytes(docg3, + DOC_LAYOUT_PAGE_SIZE - nbdata - skip, NULL, 0); ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0); if (ret < nboob) @@ -950,13 +948,15 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, len -= nbdata; ooblen -= nboob; from += DOC_LAYOUT_PAGE_SIZE; + skip = 0; } +out: + mutex_unlock(&docg3->cascade->lock); return ret; err_in_read: doc_read_page_finish(docg3); -err: - return ret; + goto out; } /** @@ -1114,10 +1114,10 @@ static int doc_get_op_status(struct docg3 *docg3) */ static int doc_write_erase_wait_status(struct docg3 *docg3) { - int status, ret = 0; + int i, status, ret = 0; - if (!doc_is_ready(docg3)) - usleep_range(3000, 3000); + for (i = 0; !doc_is_ready(docg3) && i < 5; i++) + msleep(20); if (!doc_is_ready(docg3)) { doc_dbg("Timeout reached and the chip is still not ready\n"); ret = -EAGAIN; @@ -1196,18 +1196,19 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) int block0, block1, page, ret, ofs = 0; doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len); - doc_set_device_id(docg3, docg3->device_id); info->state = MTD_ERASE_PENDING; calc_block_sector(info->addr + info->len, &block0, &block1, &page, &ofs, docg3->reliable); ret = -EINVAL; - if (block1 > docg3->max_block || page || ofs) + if (info->addr + info->len > mtd->size || page || ofs) goto reset_err; ret = 0; calc_block_sector(info->addr, &block0, &block1, &page, &ofs, docg3->reliable); + mutex_lock(&docg3->cascade->lock); + doc_set_device_id(docg3, docg3->device_id); doc_set_reliable_mode(docg3); for (len = info->len; !ret && len > 0; len -= mtd->erasesize) { info->state = MTD_ERASING; @@ -1215,6 +1216,7 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) block0 += 2; block1 += 2; } + mutex_unlock(&docg3->cascade->lock); if (ret) goto reset_err; @@ -1401,7 +1403,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, pofs = 0, autoecc, oobdelta; + int ret, autoecc, oobdelta; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen; @@ -1438,12 +1440,8 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (len && ooblen && (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta)) return -EINVAL; - - ret = -EINVAL; - calc_block_sector(ofs + len, &block0, &block1, &page, &pofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (ofs + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; @@ -1457,6 +1455,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (autoecc < 0) return autoecc; + mutex_lock(&docg3->cascade->lock); while (!ret && len > 0) { memset(oob, 0, sizeof(oob)); if (ofs == docg3->oob_write_ofs) @@ -1477,8 +1476,9 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, } ops->retlen += DOC_LAYOUT_PAGE_SIZE; } -err: + doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return ret; } @@ -1535,9 +1535,11 @@ static ssize_t dps0_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps0; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK)); } @@ -1548,9 +1550,11 @@ static ssize_t dps1_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps1; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK)); } @@ -1565,10 +1569,12 @@ static ssize_t dps0_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS0_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1582,10 +1588,12 @@ static ssize_t dps1_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS1_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1601,13 +1609,13 @@ static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = { }; static int doc_register_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { int ret = 0, floor, i = 0; struct device *dev = &pdev->dev; - for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && floors[floor]; - floor++) + for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && + cascade->floors[floor]; floor++) for (i = 0; !ret && i < 4; i++) ret = device_create_file(dev, &doc_sys_attrs[floor][i]); if (!ret) @@ -1621,12 +1629,12 @@ static int doc_register_sysfs(struct platform_device *pdev, } static void doc_unregister_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { struct device *dev = &pdev->dev; int floor, i; - for (floor = 0; floor < DOC_MAX_NBFLOORS && floors[floor]; + for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor]; floor++) for (i = 0; i < 4; i++) device_remove_file(dev, &doc_sys_attrs[floor][i]); @@ -1640,7 +1648,11 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p) struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + u8 fctrl; + + mutex_lock(&docg3->cascade->lock); + fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", @@ -1658,9 +1670,12 @@ static int dbg_asicmode_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; - int pctrl = doc_register_readb(docg3, DOC_ASICMODE); - int mode = pctrl & 0x03; + int pos = 0, pctrl, mode; + + mutex_lock(&docg3->cascade->lock); + pctrl = doc_register_readb(docg3, DOC_ASICMODE); + mode = pctrl & 0x03; + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", @@ -1692,7 +1707,11 @@ static int dbg_device_id_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - int id = doc_register_readb(docg3, DOC_DEVICESELECT); + int id; + + mutex_lock(&docg3->cascade->lock); + id = doc_register_readb(docg3, DOC_DEVICESELECT); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "DeviceId = %d\n", id); return pos; @@ -1705,6 +1724,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) int pos = 0; int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high; + mutex_lock(&docg3->cascade->lock); protect = doc_register_readb(docg3, DOC_PROTECTION); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW); @@ -1712,6 +1732,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW); dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "Protection = 0x%02x (", protect); @@ -1804,7 +1825,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) switch (chip_id) { case DOC_CHIPID_G3: - mtd->name = kasprintf(GFP_KERNEL, "DiskOnChip G3 floor %d", + mtd->name = kasprintf(GFP_KERNEL, "docg3.%d", docg3->device_id); docg3->max_block = 2047; break; @@ -1817,16 +1838,17 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; if (docg3->reliable == 2) mtd->erasesize /= 2; - mtd->writesize = DOC_LAYOUT_PAGE_SIZE; + mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; - mtd->block_isbad = doc_block_isbad; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; + mtd->_block_isbad = doc_block_isbad; mtd->ecclayout = &docg3_oobinfo; + mtd->ecc_strength = DOC_ECC_BCH_T; } /** @@ -1834,6 +1856,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * @base: the io space where the device is probed * @floor: the floor of the probed device * @dev: the device + * @cascade: the cascade of chips this devices will belong to * * Checks whether a device at the specified IO range, and floor is available. * @@ -1841,8 +1864,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is * launched. */ -static struct mtd_info *doc_probe_device(void __iomem *base, int floor, - struct device *dev) +static struct mtd_info * __init +doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev) { int ret, bbt_nbpages; u16 chip_id, chip_id_inv; @@ -1865,7 +1888,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, docg3->dev = dev; docg3->device_id = floor; - docg3->base = base; + docg3->cascade = cascade; doc_set_device_id(docg3, docg3->device_id); if (!floor) doc_set_asic_mode(docg3, DOC_ASICMODE_RESET); @@ -1882,7 +1905,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, switch (chip_id) { case DOC_CHIPID_G3: doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n", - base, floor); + docg3->cascade->base, floor); break; default: doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id); @@ -1927,10 +1950,12 @@ static void doc_release_device(struct mtd_info *mtd) static int docg3_resume(struct platform_device *pdev) { int i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; mtd = docg3_floors[0]; docg3 = mtd->priv; @@ -1952,11 +1977,13 @@ static int docg3_resume(struct platform_device *pdev) static int docg3_suspend(struct platform_device *pdev, pm_message_t state) { int floor, i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; u8 ctrl, pwr_down; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { mtd = docg3_floors[floor]; if (!mtd) @@ -2006,7 +2033,7 @@ static int __init docg3_probe(struct platform_device *pdev) struct resource *ress; void __iomem *base; int ret, floor, found = 0; - struct mtd_info **docg3_floors; + struct docg3_cascade *cascade; ret = -ENXIO; ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2017,17 +2044,19 @@ static int __init docg3_probe(struct platform_device *pdev) base = ioremap(ress->start, DOC_IOSPACE_SIZE); ret = -ENOMEM; - docg3_floors = kzalloc(sizeof(*docg3_floors) * DOC_MAX_NBFLOORS, - GFP_KERNEL); - if (!docg3_floors) + cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS, + GFP_KERNEL); + if (!cascade) goto nomem1; - docg3_bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, + cascade->base = base; + mutex_init(&cascade->lock); + cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, DOC_ECC_BCH_PRIMPOLY); - if (!docg3_bch) + if (!cascade->bch) goto nomem2; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { - mtd = doc_probe_device(base, floor, dev); + mtd = doc_probe_device(cascade, floor, dev); if (IS_ERR(mtd)) { ret = PTR_ERR(mtd); goto err_probe; @@ -2038,7 +2067,7 @@ static int __init docg3_probe(struct platform_device *pdev) else continue; } - docg3_floors[floor] = mtd; + cascade->floors[floor] = mtd; ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); if (ret) @@ -2046,26 +2075,26 @@ static int __init docg3_probe(struct platform_device *pdev) found++; } - ret = doc_register_sysfs(pdev, docg3_floors); + ret = doc_register_sysfs(pdev, cascade); if (ret) goto err_probe; if (!found) goto notfound; - platform_set_drvdata(pdev, docg3_floors); - doc_dbg_register(docg3_floors[0]->priv); + platform_set_drvdata(pdev, cascade); + doc_dbg_register(cascade->floors[0]->priv); return 0; notfound: ret = -ENODEV; dev_info(dev, "No supported DiskOnChip found\n"); err_probe: - free_bch(docg3_bch); + kfree(cascade->bch); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); nomem2: - kfree(docg3_floors); + kfree(cascade); nomem1: iounmap(base); noress: @@ -2080,19 +2109,19 @@ noress: */ static int __exit docg3_release(struct platform_device *pdev) { - struct mtd_info **docg3_floors = platform_get_drvdata(pdev); - struct docg3 *docg3 = docg3_floors[0]->priv; - void __iomem *base = docg3->base; + struct docg3_cascade *cascade = platform_get_drvdata(pdev); + struct docg3 *docg3 = cascade->floors[0]->priv; + void __iomem *base = cascade->base; int floor; - doc_unregister_sysfs(pdev, docg3_floors); + doc_unregister_sysfs(pdev, cascade); doc_dbg_unregister(docg3); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); - kfree(docg3_floors); - free_bch(docg3_bch); + free_bch(docg3->cascade->bch); + kfree(cascade); iounmap(base); return 0; } diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h index db0da436b493..19fb93f96a3a 100644 --- a/drivers/mtd/devices/docg3.h +++ b/drivers/mtd/devices/docg3.h @@ -22,6 +22,8 @@ #ifndef _MTD_DOCG3_H #define _MTD_DOCG3_H +#include <linux/mtd/mtd.h> + /* * Flash memory areas : * - 0x0000 .. 0x07ff : IPL @@ -267,9 +269,23 @@ #define DOC_LAYOUT_DPS_KEY_LENGTH 8 /** + * struct docg3_cascade - Cascade of 1 to 4 docg3 chips + * @floors: floors (ie. one physical docg3 chip is one floor) + * @base: IO space to access all chips in the cascade + * @bch: the BCH correcting control structure + * @lock: lock to protect docg3 IO space from concurrent accesses + */ +struct docg3_cascade { + struct mtd_info *floors[DOC_MAX_NBFLOORS]; + void __iomem *base; + struct bch_control *bch; + struct mutex lock; +}; + +/** * struct docg3 - DiskOnChip driver private data * @dev: the device currently under control - * @base: mapped IO space + * @cascade: the cascade this device belongs to * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) * @if_cfg: if true, reads are on 16bits, else reads are on 8bits @@ -287,7 +303,7 @@ */ struct docg3 { struct device *dev; - void __iomem *base; + struct docg3_cascade *cascade; unsigned int device_id:4; unsigned int if_cfg:1; unsigned int reliable:2; diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 3a11ea628e58..82bd00af5cc3 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -367,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len); #endif - /* sanity checks */ - if (instr->addr + instr->len > mtd->size) return (-EINVAL); - /* * check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. @@ -440,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len); #endif - /* sanity checks */ - if (!len) return (0); - if (from + len > mtd->size) return (-EINVAL); - /* we always read len bytes */ *retlen = len; @@ -522,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len); #endif - *retlen = 0; - /* sanity checks */ if (!len) return (0); - if (to + len > mtd->size) return (-EINVAL); /* first, we write a 0xFF.... padded byte until we reach a dword boundary */ if (to & (BUSWIDTH - 1)) @@ -630,14 +620,15 @@ static int __init lart_flash_init (void) mtd.name = module_name; mtd.type = MTD_NORFLASH; mtd.writesize = 1; + mtd.writebufsize = 4; mtd.flags = MTD_CAP_NORFLASH; mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN; mtd.erasesize = FLASH_BLOCKSIZE_MAIN; mtd.numeraseregions = ARRAY_SIZE(erase_regions); mtd.eraseregions = erase_regions; - mtd.erase = flash_erase; - mtd.read = flash_read; - mtd.write = flash_write; + mtd._erase = flash_erase; + mtd._read = flash_read; + mtd._write = flash_write; mtd.owner = THIS_MODULE; #ifdef LART_DEBUG diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c60dddbefc0..1924d247c1cb 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -288,9 +288,6 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) __func__, (long long)instr->addr, (long long)instr->len); - /* sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; div_u64_rem(instr->len, mtd->erasesize, &rem); if (rem) return -EINVAL; @@ -349,13 +346,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)from, len); - /* sanity checks */ - if (!len) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -371,9 +361,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, t[1].len = len; spi_message_add_tail(&t[1], &m); - /* Byte count starts at zero. */ - *retlen = 0; - mutex_lock(&flash->lock); /* Wait till previous write/erase is done. */ @@ -417,15 +404,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return(0); - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -509,15 +487,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -908,14 +877,14 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.writesize = 1; flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; + flash->mtd._erase = m25p80_erase; + flash->mtd._read = m25p80_read; /* sst flash chips use AAI word program */ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) - flash->mtd.write = sst_write; + flash->mtd._write = sst_write; else - flash->mtd.write = m25p80_write; + flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { @@ -932,6 +901,7 @@ static int __devinit m25p_probe(struct spi_device *spi) ppdata.of_node = spi->dev.of_node; flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; + flash->mtd.writebufsize = flash->page_size; if (info->addr_width) flash->addr_width = info->addr_width; @@ -1004,21 +974,7 @@ static struct spi_driver m25p80_driver = { */ }; - -static int __init m25p80_init(void) -{ - return spi_register_driver(&m25p80_driver); -} - - -static void __exit m25p80_exit(void) -{ - spi_unregister_driver(&m25p80_driver); -} - - -module_init(m25p80_init); -module_exit(m25p80_exit); +module_spi_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender"); diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 8423fb6d4f26..182849d39c61 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -59,12 +59,8 @@ static int ms02nv_read(struct mtd_info *mtd, loff_t from, { struct ms02nv_private *mp = mtd->priv; - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mp->uaddr + from, len); *retlen = len; - return 0; } @@ -73,12 +69,8 @@ static int ms02nv_write(struct mtd_info *mtd, loff_t to, { struct ms02nv_private *mp = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(mp->uaddr + to, buf, len); *retlen = len; - return 0; } @@ -215,8 +207,8 @@ static int __init ms02nv_init_one(ulong addr) mtd->size = fixsize; mtd->name = (char *)ms02nv_name; mtd->owner = THIS_MODULE; - mtd->read = ms02nv_read; - mtd->write = ms02nv_write; + mtd->_read = ms02nv_read; + mtd->_write = ms02nv_write; mtd->writesize = 1; ret = -EIO; diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 236057ead0d2..928fb0e6d73a 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -164,9 +164,6 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) dev_name(&spi->dev), (long long)instr->addr, (long long)instr->len); - /* Sanity checks */ - if (instr->addr + instr->len > mtd->size) - return -EINVAL; div_u64_rem(instr->len, priv->page_size, &rem); if (rem) return -EINVAL; @@ -252,14 +249,6 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if (from + len > mtd->size) - return -EINVAL; - /* Calculate flash page/byte address */ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); @@ -328,14 +317,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: write 0x%x..0x%x\n", dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if ((to + len) > mtd->size) - return -EINVAL; - spi_message_init(&msg); x[0].tx_buf = command = priv->command; @@ -490,8 +471,6 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base, if ((off + len) > 64) len = 64 - off; - if (len == 0) - return len; spi_message_init(&m); @@ -611,16 +590,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, static char *otp_setup(struct mtd_info *device, char revision) { - device->get_fact_prot_info = dataflash_get_otp_info; - device->read_fact_prot_reg = dataflash_read_fact_otp; - device->get_user_prot_info = dataflash_get_otp_info; - device->read_user_prot_reg = dataflash_read_user_otp; + device->_get_fact_prot_info = dataflash_get_otp_info; + device->_read_fact_prot_reg = dataflash_read_fact_otp; + device->_get_user_prot_info = dataflash_get_otp_info; + device->_read_user_prot_reg = dataflash_read_user_otp; /* rev c parts (at45db321c and at45db1281 only!) use a * different write procedure; not (yet?) implemented. */ if (revision > 'c') - device->write_user_prot_reg = dataflash_write_user_otp; + device->_write_user_prot_reg = dataflash_write_user_otp; return ", OTP"; } @@ -672,9 +651,9 @@ add_dataflash_otp(struct spi_device *spi, char *name, device->owner = THIS_MODULE; device->type = MTD_DATAFLASH; device->flags = MTD_WRITEABLE; - device->erase = dataflash_erase; - device->read = dataflash_read; - device->write = dataflash_write; + device->_erase = dataflash_erase; + device->_read = dataflash_read; + device->_write = dataflash_write; device->priv = priv; device->dev.parent = &spi->dev; @@ -946,18 +925,7 @@ static struct spi_driver dataflash_driver = { /* FIXME: investigate suspend and resume... */ }; -static int __init dataflash_init(void) -{ - return spi_register_driver(&dataflash_driver); -} -module_init(dataflash_init); - -static void __exit dataflash_exit(void) -{ - spi_unregister_driver(&dataflash_driver); -} -module_exit(dataflash_exit); - +module_spi_driver(dataflash_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Andrew Victor, David Brownell"); diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 2562689ba6b4..ec59d65897fb 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -34,34 +34,23 @@ static struct mtd_info *mtd_info; static int ram_erase(struct mtd_info *mtd, struct erase_info *instr) { - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset((char *)mtd->priv + instr->addr, 0xff, instr->len); - instr->state = MTD_ERASE_DONE; mtd_erase_callback(instr); - return 0; } static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } /* @@ -80,11 +69,7 @@ static unsigned long ram_get_unmapped_area(struct mtd_info *mtd, static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mtd->priv + from, len); - *retlen = len; return 0; } @@ -92,11 +77,7 @@ static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - if (to + len > mtd->size) - return -EINVAL; - memcpy((char *)mtd->priv + to, buf, len); - *retlen = len; return 0; } @@ -126,12 +107,12 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->priv = mapped_address; mtd->owner = THIS_MODULE; - mtd->erase = ram_erase; - mtd->point = ram_point; - mtd->unpoint = ram_unpoint; - mtd->get_unmapped_area = ram_get_unmapped_area; - mtd->read = ram_read; - mtd->write = ram_write; + mtd->_erase = ram_erase; + mtd->_point = ram_point; + mtd->_unpoint = ram_unpoint; + mtd->_get_unmapped_area = ram_get_unmapped_area; + mtd->_read = ram_read; + mtd->_write = ram_write; if (mtd_device_register(mtd, NULL, 0)) return -EIO; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 23423bd00b06..67823de68db6 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -33,45 +33,33 @@ struct phram_mtd_list { static LIST_HEAD(phram_list); - static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) { u_char *start = mtd->priv; - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset(start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) + /* + * This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } static int phram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -79,14 +67,7 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, { u_char *start = mtd->priv; - if (from >= mtd->size) - return -EINVAL; - - if (len > mtd->size - from) - len = mtd->size - from; - memcpy(buf, start + from, len); - *retlen = len; return 0; } @@ -96,20 +77,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len, { u_char *start = mtd->priv; - if (to >= mtd->size) - return -EINVAL; - - if (len > mtd->size - to) - len = mtd->size - to; - memcpy(start + to, buf, len); - *retlen = len; return 0; } - - static void unregister_devices(void) { struct phram_mtd_list *this, *safe; @@ -142,11 +114,11 @@ static int register_device(char *name, unsigned long start, unsigned long len) new->mtd.name = name; new->mtd.size = len; new->mtd.flags = MTD_CAP_RAM; - new->mtd.erase = phram_erase; - new->mtd.point = phram_point; - new->mtd.unpoint = phram_unpoint; - new->mtd.read = phram_read; - new->mtd.write = phram_write; + new->mtd._erase = phram_erase; + new->mtd._point = phram_point; + new->mtd._unpoint = phram_unpoint; + new->mtd._read = phram_read; + new->mtd._write = phram_write; new->mtd.owner = THIS_MODULE; new->mtd.type = MTD_RAM; new->mtd.erasesize = PAGE_SIZE; @@ -233,7 +205,17 @@ static inline void kill_final_newline(char *str) return 1; \ } while (0) -static int phram_setup(const char *val, struct kernel_param *kp) +/* + * This shall contain the module parameter if any. It is of the form: + * - phram=<device>,<address>,<size> for module case + * - phram.phram=<device>,<address>,<size> for built-in case + * We leave 64 bytes for the device name, 12 for the address and 12 for the + * size. + * Example: phram.phram=rootfs,0xa0000000,512Mi + */ +static __initdata char phram_paramline[64+12+12]; + +static int __init phram_setup(const char *val) { char buf[64+12+12], *str = buf; char *token[3]; @@ -282,12 +264,28 @@ static int phram_setup(const char *val, struct kernel_param *kp) return ret; } -module_param_call(phram, phram_setup, NULL, NULL, 000); +static int __init phram_param_call(const char *val, struct kernel_param *kp) +{ + /* + * This function is always called before 'init_phram()', whether + * built-in or module. + */ + if (strlen(val) >= sizeof(phram_paramline)) + return -ENOSPC; + strcpy(phram_paramline, val); + + return 0; +} + +module_param_call(phram, phram_param_call, NULL, NULL, 000); MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\""); static int __init init_phram(void) { + if (phram_paramline[0]) + return phram_setup(phram_paramline); + return 0; } diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 5d53c5760a6c..0c51b988e1f8 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -94,12 +94,48 @@ #include <linux/ioctl.h> #include <asm/io.h> #include <linux/pci.h> - #include <linux/mtd/mtd.h> -#include <linux/mtd/pmc551.h> + +#define PMC551_VERSION \ + "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" + +#define PCI_VENDOR_ID_V3_SEMI 0x11b0 +#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 + +#define PMC551_PCI_MEM_MAP0 0x50 +#define PMC551_PCI_MEM_MAP1 0x54 +#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 +#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 +#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 +#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 + +#define PMC551_SDRAM_MA 0x60 +#define PMC551_SDRAM_CMD 0x62 +#define PMC551_DRAM_CFG 0x64 +#define PMC551_SYS_CTRL_REG 0x78 + +#define PMC551_DRAM_BLK0 0x68 +#define PMC551_DRAM_BLK1 0x6c +#define PMC551_DRAM_BLK2 0x70 +#define PMC551_DRAM_BLK3 0x74 +#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f)) +#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) +#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) + +struct mypriv { + struct pci_dev *dev; + u_char *start; + u32 base_map0; + u32 curr_map0; + u32 asize; + struct mtd_info *nextpmc551; +}; static struct mtd_info *pmc551list; +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; @@ -115,16 +151,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) #endif end = instr->addr + instr->len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); @@ -178,18 +204,6 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); #endif - if (from + len > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", - (long)from + len, (long)mtd->size); -#endif - return -EINVAL; - } - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - soff_hi = from & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -205,11 +219,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif + return 0; } static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -228,16 +243,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, #endif end = from + len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -295,16 +300,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, #endif end = to + len - 1; - /* Is it past the end? or did the u32 wrap? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, " - "size: %ld, to: %ld)\n", (long)end, (long)mtd->size, - (long)to); -#endif - return -EINVAL; - } - soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = to & (priv->asize - 1); @@ -358,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, * mechanism * returns the size of the memory region found. */ -static u32 fixup_pmc551(struct pci_dev *dev) +static int fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX u32 dram_data; @@ -668,7 +663,7 @@ static int __init init_pmc551(void) struct mypriv *priv; int found = 0; struct mtd_info *mtd; - u32 length = 0; + int length = 0; if (msize) { msize = (1 << (ffs(msize) - 1)) << 20; @@ -786,11 +781,11 @@ static int __init init_pmc551(void) mtd->size = msize; mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; + mtd->_erase = pmc551_erase; + mtd->_read = pmc551_read; + mtd->_write = pmc551_write; + mtd->_point = pmc551_point; + mtd->_unpoint = pmc551_unpoint; mtd->type = MTD_RAM; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 288594163c22..8f52fc858e48 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -75,7 +75,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL; static int slram_erase(struct mtd_info *, struct erase_info *); static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **, resource_size_t *); -static void slram_unpoint(struct mtd_info *, loff_t, size_t); +static int slram_unpoint(struct mtd_info *, loff_t, size_t); static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -83,21 +83,13 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr) { slram_priv_t *priv = mtd->priv; - if (instr->addr + instr->len > mtd->size) { - return(-EINVAL); - } - memset(priv->start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return(0); } @@ -106,20 +98,14 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - - if (from + len > mtd->size) - return -EINVAL; - *virt = priv->start + from; *retlen = len; return(0); } -static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -127,14 +113,7 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - if (from > mtd->size) - return -EINVAL; - - if (from + len > mtd->size) - len = mtd->size - from; - memcpy(buf, priv->start + from, len); - *retlen = len; return(0); } @@ -144,11 +123,7 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len, { slram_priv_t *priv = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(priv->start + to, buf, len); - *retlen = len; return(0); } @@ -199,11 +174,11 @@ static int register_device(char *name, unsigned long start, unsigned long length (*curmtd)->mtdinfo->name = name; (*curmtd)->mtdinfo->size = length; (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; - (*curmtd)->mtdinfo->erase = slram_erase; - (*curmtd)->mtdinfo->point = slram_point; - (*curmtd)->mtdinfo->unpoint = slram_unpoint; - (*curmtd)->mtdinfo->read = slram_read; - (*curmtd)->mtdinfo->write = slram_write; + (*curmtd)->mtdinfo->_erase = slram_erase; + (*curmtd)->mtdinfo->_point = slram_point; + (*curmtd)->mtdinfo->_unpoint = slram_unpoint; + (*curmtd)->mtdinfo->_read = slram_read; + (*curmtd)->mtdinfo->_write = slram_write; (*curmtd)->mtdinfo->owner = THIS_MODULE; (*curmtd)->mtdinfo->type = MTD_RAM; (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c new file mode 100644 index 000000000000..797d43cd3550 --- /dev/null +++ b/drivers/mtd/devices/spear_smi.c @@ -0,0 +1,1147 @@ +/* + * SMI (Serial Memory Controller) device driver for Serial NOR Flash on + * SPEAr platform + * The serial nor interface is largely based on drivers/mtd/m25p80.c, + * however the SPI interface has been replaced by SMI. + * + * Copyright © 2010 STMicroelectronics. + * Ashish Priyadarshi + * Shiraz Hashim <shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spear_smi.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/of.h> +#include <linux/of_address.h> + +/* SMI clock rate */ +#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ + +/* MAX time out to safely come out of a erase or write busy conditions */ +#define SMI_PROBE_TIMEOUT (HZ / 10) +#define SMI_MAX_TIME_OUT (3 * HZ) + +/* timeout for command completion */ +#define SMI_CMD_TIMEOUT (HZ / 10) + +/* registers of smi */ +#define SMI_CR1 0x0 /* SMI control register 1 */ +#define SMI_CR2 0x4 /* SMI control register 2 */ +#define SMI_SR 0x8 /* SMI status register */ +#define SMI_TR 0xC /* SMI transmit register */ +#define SMI_RR 0x10 /* SMI receive register */ + +/* defines for control_reg 1 */ +#define BANK_EN (0xF << 0) /* enables all banks */ +#define DSEL_TIME (0x6 << 4) /* Deselect time 6 + 1 SMI_CK periods */ +#define SW_MODE (0x1 << 28) /* enables SW Mode */ +#define WB_MODE (0x1 << 29) /* Write Burst Mode */ +#define FAST_MODE (0x1 << 15) /* Fast Mode */ +#define HOLD1 (0x1 << 16) /* Clock Hold period selection */ + +/* defines for control_reg 2 */ +#define SEND (0x1 << 7) /* Send data */ +#define TFIE (0x1 << 8) /* Transmission Flag Interrupt Enable */ +#define WCIE (0x1 << 9) /* Write Complete Interrupt Enable */ +#define RD_STATUS_REG (0x1 << 10) /* reads status reg */ +#define WE (0x1 << 11) /* Write Enable */ + +#define TX_LEN_SHIFT 0 +#define RX_LEN_SHIFT 4 +#define BANK_SHIFT 12 + +/* defines for status register */ +#define SR_WIP 0x1 /* Write in progress */ +#define SR_WEL 0x2 /* Write enable latch */ +#define SR_BP0 0x4 /* Block protect 0 */ +#define SR_BP1 0x8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ +#define TFF 0x100 /* Transfer Finished Flag */ +#define WCF 0x200 /* Transfer Finished Flag */ +#define ERF1 0x400 /* Forbidden Write Request */ +#define ERF2 0x800 /* Forbidden Access */ + +#define WM_SHIFT 12 + +/* flash opcodes */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Flash Device Ids maintenance section */ + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + u8 erase_cmd; + u32 device_id; + u32 pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +static struct flash_device flash_devices[] = { + FLASH_ID("st m25p16" , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32" , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64" , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128" , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m25p05" , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000), + FLASH_ID("st m25p10" , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000), + FLASH_ID("st m25p20" , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40" , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80" , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m45pe10" , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20" , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40" , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80" , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004" , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008" , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016" , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032" , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064" , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512" , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000), + FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000), + FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512" , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005" , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005" , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l4005a" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005" , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605" , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l1605a" , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000), + FLASH_ID("mac 25l3205" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l3205a" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405" , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000), +}; + +/* Define spear specific structures */ + +struct spear_snor_flash; + +/** + * struct spear_smi - Structure for SMI Device + * + * @clk: functional clock + * @status: current status register of SMI. + * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ) + * @lock: lock to prevent parallel access of SMI. + * @io_base: base address for registers of SMI. + * @pdev: platform device + * @cmd_complete: queue to wait for command completion of NOR-flash. + * @num_flashes: number of flashes actually present on board. + * @flash: separate structure for each Serial NOR-flash attached to SMI. + */ +struct spear_smi { + struct clk *clk; + u32 status; + unsigned long clk_rate; + struct mutex lock; + void __iomem *io_base; + struct platform_device *pdev; + wait_queue_head_t cmd_complete; + u32 num_flashes; + struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP]; +}; + +/** + * struct spear_snor_flash - Structure for Serial NOR Flash + * + * @bank: Bank number(0, 1, 2, 3) for each NOR-flash. + * @dev_id: Device ID of NOR-flash. + * @lock: lock to manage flash read, write and erase operations + * @mtd: MTD info for each NOR-flash. + * @num_parts: Total number of partition in each bank of NOR-flash. + * @parts: Partition info for each bank of NOR-flash. + * @page_size: Page size of NOR-flash. + * @base_addr: Base address of NOR-flash. + * @erase_cmd: erase command may vary on different flash types + * @fast_mode: flash supports read in fast mode + */ +struct spear_snor_flash { + u32 bank; + u32 dev_id; + struct mutex lock; + struct mtd_info mtd; + u32 num_parts; + struct mtd_partition *parts; + u32 page_size; + void __iomem *base_addr; + u8 erase_cmd; + u8 fast_mode; +}; + +static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd) +{ + return container_of(mtd, struct spear_snor_flash, mtd); +} + +/** + * spear_smi_read_sr - Read status register of flash through SMI + * @dev: structure of SMI information. + * @bank: bank to which flash is connected + * + * This routine will return the status register of the flash chip present at the + * given bank. + */ +static int spear_smi_read_sr(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in hw mode */ + writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1); + + /* performing a rsr instruction in hw mode */ + writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE, + dev->io_base + SMI_CR2); + + /* wait for tff */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* copy dev->status (lower 16 bits) in order to release lock */ + if (ret > 0) + ret = dev->status & 0xffff; + else + ret = -EIO; + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + mutex_unlock(&dev->lock); + + return ret; +} + +/** + * spear_smi_wait_till_ready - wait till flash is ready + * @dev: structure of SMI information. + * @bank: flash corresponding to this bank + * @timeout: timeout for busy wait condition + * + * This routine checks for WIP (write in progress) bit in Status register + * If successful the routine returns 0 else -EBUSY + */ +static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank, + unsigned long timeout) +{ + unsigned long finish; + int status; + + finish = jiffies + timeout; + do { + status = spear_smi_read_sr(dev, bank); + if (status < 0) + continue; /* try till timeout */ + else if (!(status & SR_WIP)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, finish)); + + dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n"); + return status; +} + +/** + * spear_smi_int_handler - SMI Interrupt Handler. + * @irq: irq number + * @dev_id: structure of SMI device, embedded in dev_id. + * + * The handler clears all interrupt conditions and records the status in + * dev->status which is used by the driver later. + */ +static irqreturn_t spear_smi_int_handler(int irq, void *dev_id) +{ + u32 status = 0; + struct spear_smi *dev = dev_id; + + status = readl(dev->io_base + SMI_SR); + + if (unlikely(!status)) + return IRQ_NONE; + + /* clear all interrupt conditions */ + writel(0, dev->io_base + SMI_SR); + + /* copy the status register in dev->status */ + dev->status |= status; + + /* send the completion */ + wake_up_interruptible(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +/** + * spear_smi_hw_init - initializes the smi controller. + * @dev: structure of smi device + * + * this routine initializes the smi controller wit the default values + */ +static void spear_smi_hw_init(struct spear_smi *dev) +{ + unsigned long rate = 0; + u32 prescale = 0; + u32 val; + + rate = clk_get_rate(dev->clk); + + /* functional clock of smi */ + prescale = DIV_ROUND_UP(rate, dev->clk_rate); + + /* + * setting the standard values, fast mode, prescaler for + * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable + */ + val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8); + + mutex_lock(&dev->lock); + writel(val, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); +} + +/** + * get_flash_index - match chip id from a flash list. + * @flash_id: a valid nor flash chip id obtained from board. + * + * try to validate the chip id by matching from a list, if not found then simply + * returns negative. In case of success returns index in to the flash devices + * array. + */ +static int get_flash_index(u32 flash_id) +{ + int index; + + /* Matches chip-id to entire list of 'serial-nor flash' ids */ + for (index = 0; index < ARRAY_SIZE(flash_devices); index++) { + if (flash_devices[index].device_id == flash_id) + return index; + } + + /* Memory chip is not listed and not supported */ + return -ENODEV; +} + +/** + * spear_smi_write_enable - Enable the flash to do write operation + * @dev: structure of SMI device + * @bank: enable write for flash connected to this bank + * + * Set write enable latch with Write Enable command. + * Returns 0 on success. + */ +static int spear_smi_write_enable(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in h/w mode */ + writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1); + + /* give the flash, write enable command */ + writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, + "smi controller failed on write enable\n"); + } else { + /* check whether write mode status is set for required bank */ + if (dev->status & (1 << (bank + WM_SHIFT))) + ret = 0; + else { + dev_err(&dev->pdev->dev, "couldn't enable write\n"); + ret = -EIO; + } + } + + mutex_unlock(&dev->lock); + return ret; +} + +static inline u32 +get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset) +{ + u32 cmd; + u8 *x = (u8 *)&cmd; + + x[0] = flash->erase_cmd; + x[1] = offset >> 16; + x[2] = offset >> 8; + x[3] = offset; + + return cmd; +} + +/** + * spear_smi_erase_sector - erase one sector of flash + * @dev: structure of SMI information + * @command: erase command to be send + * @bank: bank to which this command needs to be send + * @bytes: size of command + * + * Erase one sector of flash memory at offset ``offset'' which is any + * address within the sector which should be erased. + * Returns 0 if successful, non-zero otherwise. + */ +static int spear_smi_erase_sector(struct spear_smi *dev, + u32 bank, u32 command, u32 bytes) +{ + u32 ctrlreg1 = 0; + int ret; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1); + + /* send command in sw mode */ + writel(command, dev->io_base + SMI_TR); + + writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT), + dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, "sector erase failed\n"); + } else + ret = 0; /* success */ + + /* restore ctrl regs */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + mutex_unlock(&dev->lock); + return ret; +} + +/** + * spear_mtd_erase - perform flash erase operation as requested by user + * @mtd: Provides the memory characteristics + * @e_info: Provides the erase information + * + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + u32 addr, command, bank; + int len, ret; + + if (!flash || !dev) + return -ENODEV; + + bank = flash->bank; + if (bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + addr = e_info->addr; + len = e_info->len; + + mutex_lock(&flash->lock); + + /* now erase sectors in loop */ + while (len) { + command = get_sector_erase_cmd(flash, addr); + /* preparing the command for flash */ + ret = spear_smi_erase_sector(dev, bank, command, 4); + if (ret) { + e_info->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return ret; + } + addr += mtd->erasesize; + len -= mtd->erasesize; + } + + mutex_unlock(&flash->lock); + e_info->state = MTD_ERASE_DONE; + mtd_erase_callback(e_info); + + return 0; +} + +/** + * spear_mtd_read - performs flash read operation as requested by the user + * @mtd: MTD information of the memory bank + * @from: Address from which to start read + * @len: Number of bytes to be read + * @retlen: Fills the Number of bytes actually read + * @buf: Fills this after reading + * + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *src; + u32 ctrlreg1, val; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + src = flash->base_addr + from; + + mutex_lock(&flash->lock); + + /* wait till previous write/erase is done. */ + ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + mutex_lock(&dev->lock); + /* put smi in hw mode not wbt mode */ + ctrlreg1 = val = readl(dev->io_base + SMI_CR1); + val &= ~(SW_MODE | WB_MODE); + if (flash->fast_mode) + val |= FAST_MODE; + + writel(val, dev->io_base + SMI_CR1); + + memcpy_fromio(buf, (u8 *)src, len); + + /* restore ctrl reg1 */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); + + *retlen = len; + mutex_unlock(&flash->lock); + + return 0; +} + +static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank, + void *dest, const void *src, size_t len) +{ + int ret; + u32 ctrlreg1; + + /* wait until finished previous write command. */ + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + /* put smi in write enable */ + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + /* put smi in hw, write burst mode */ + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1); + + memcpy_toio(dest, src, len); + + writel(ctrlreg1, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return 0; +} + +/** + * spear_mtd_write - performs write operation as requested by the user. + * @mtd: MTD information of the memory bank. + * @to: Address to write. + * @len: Number of bytes to be written. + * @retlen: Number of bytes actually wrote. + * @buf: Buffer from which the data to be taken. + * + * Write an address range to the flash chip. Data must be written in + * flash_page_size chunks. The address range may be any size provided + * it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *dest; + u32 page_offset, page_size; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + dest = flash->base_addr + to; + mutex_lock(&flash->lock); + + page_offset = (u32)to % flash->page_size; + + /* do if all the bytes fit onto one page */ + if (page_offset + len <= flash->page_size) { + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len); + if (!ret) + *retlen += len; + } else { + u32 i; + + /* the size of data remaining on the first page */ + page_size = flash->page_size - page_offset; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, + page_size); + if (ret) + goto err_write; + else + *retlen += page_size; + + /* write everything in pagesize chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > flash->page_size) + page_size = flash->page_size; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest + i, + buf + i, page_size); + if (ret) + break; + else + *retlen += page_size; + } + } + +err_write: + mutex_unlock(&flash->lock); + + return ret; +} + +/** + * spear_smi_probe_flash - Detects the NOR Flash chip. + * @dev: structure of SMI information. + * @bank: bank on which flash must be probed + * + * This routine will check whether there exists a flash chip on a given memory + * bank ID. + * Return index of the probed flash in flash devices structure + */ +static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 val = 0; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + dev->status = 0; /* Will be set in interrupt handler */ + /* put smi in sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val | SW_MODE, dev->io_base + SMI_CR1); + + /* send readid command in sw mode */ + writel(OPCODE_RDID, dev->io_base + SMI_TR); + + val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) | + (3 << RX_LEN_SHIFT) | TFIE; + writel(val, dev->io_base + SMI_CR2); + + /* wait for TFF */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + if (ret <= 0) { + ret = -ENODEV; + goto err_probe; + } + + /* get memory chip id */ + val = readl(dev->io_base + SMI_RR); + val &= 0x00ffffff; + ret = get_flash_index(val); + +err_probe: + /* clear sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val & ~SW_MODE, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return ret; +} + + +#ifdef CONFIG_OF +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *pp = NULL; + const __be32 *addr; + u32 val; + int len; + int i = 0; + + if (!np) + return -ENODEV; + + of_property_read_u32(np, "clock-rate", &val); + pdata->clk_rate = val; + + pdata->board_flash_info = devm_kzalloc(&pdev->dev, + sizeof(*pdata->board_flash_info), + GFP_KERNEL); + + /* Fill structs for each subnode (flash device) */ + while ((pp = of_get_next_child(np, pp))) { + struct spear_smi_flash_info *flash_info; + + flash_info = &pdata->board_flash_info[i]; + pdata->np[i] = pp; + + /* Read base-addr and size from DT */ + addr = of_get_property(pp, "reg", &len); + pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]); + pdata->board_flash_info->size = be32_to_cpup(&addr[1]); + + if (of_get_property(pp, "st,smi-fast-mode", NULL)) + pdata->board_flash_info->fast_mode = 1; + + i++; + } + + pdata->num_flashes = i; + + return 0; +} +#else +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + +static int spear_smi_setup_banks(struct platform_device *pdev, + u32 bank, struct device_node *np) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + struct mtd_part_parser_data ppdata = {}; + struct spear_smi_flash_info *flash_info; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct mtd_partition *parts = NULL; + int count = 0; + int flash_index; + int ret = 0; + + pdata = dev_get_platdata(&pdev->dev); + if (bank > pdata->num_flashes - 1) + return -EINVAL; + + flash_info = &pdata->board_flash_info[bank]; + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_ATOMIC); + if (!flash) + return -ENOMEM; + flash->bank = bank; + flash->fast_mode = flash_info->fast_mode ? 1 : 0; + mutex_init(&flash->lock); + + /* verify whether nor flash is really present on board */ + flash_index = spear_smi_probe_flash(dev, bank); + if (flash_index < 0) { + dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank); + ret = flash_index; + goto err_probe; + } + /* map the memory for nor flash chip */ + flash->base_addr = ioremap(flash_info->mem_base, flash_info->size); + if (!flash->base_addr) { + ret = -EIO; + goto err_probe; + } + + dev->flash[bank] = flash; + flash->mtd.priv = dev; + + if (flash_info->name) + flash->mtd.name = flash_info->name; + else + flash->mtd.name = flash_devices[flash_index].name; + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = flash_info->size; + flash->mtd.erasesize = flash_devices[flash_index].sectorsize; + flash->page_size = flash_devices[flash_index].pagesize; + flash->mtd.writebufsize = flash->page_size; + flash->erase_cmd = flash_devices[flash_index].erase_cmd; + flash->mtd._erase = spear_mtd_erase; + flash->mtd._read = spear_mtd_read; + flash->mtd._write = spear_mtd_write; + flash->dev_id = flash_devices[flash_index].device_id; + + dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n", + flash->mtd.name, flash->mtd.size, + flash->mtd.size / (1024 * 1024)); + + dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", + flash->mtd.erasesize, flash->mtd.erasesize / 1024); + +#ifndef CONFIG_OF + if (flash_info->partitions) { + parts = flash_info->partitions; + count = flash_info->nr_partitions; + } +#endif + ppdata.of_node = np; + + ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts, + count); + if (ret) { + dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); + goto err_map; + } + + return 0; + +err_map: + iounmap(flash->base_addr); + +err_probe: + kfree(flash); + return ret; +} + +/** + * spear_smi_probe - Entry routine + * @pdev: platform device structure + * + * This is the first routine which gets invoked during booting and does all + * initialization/allocation work. The routine looks for available memory banks, + * and do proper init for any found one. + * Returns 0 on success, non zero otherwise + */ +static int __devinit spear_smi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct spear_smi_plat_data *pdata = NULL; + struct spear_smi *dev; + struct resource *smi_base; + int irq, ret = 0; + int i; + + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: ERROR: no memory", __func__); + ret = -ENOMEM; + goto err; + } + pdev->dev.platform_data = pdata; + ret = spear_smi_probe_config_dt(pdev, np); + if (ret) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!smi_base) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi base address\n"); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi irq\n"); + goto err; + } + + dev = kzalloc(sizeof(*dev), GFP_ATOMIC); + if (!dev) { + ret = -ENOMEM; + dev_err(&pdev->dev, "mem alloc fail\n"); + goto err; + } + + smi_base = request_mem_region(smi_base->start, resource_size(smi_base), + pdev->name); + if (!smi_base) { + ret = -EBUSY; + dev_err(&pdev->dev, "request mem region fail\n"); + goto err_mem; + } + + dev->io_base = ioremap(smi_base->start, resource_size(smi_base)); + if (!dev->io_base) { + ret = -EIO; + dev_err(&pdev->dev, "ioremap fail\n"); + goto err_ioremap; + } + + dev->pdev = pdev; + dev->clk_rate = pdata->clk_rate; + + if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ) + dev->clk_rate = SMI_MAX_CLOCK_FREQ; + + dev->num_flashes = pdata->num_flashes; + + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) { + dev_err(&pdev->dev, "exceeding max number of flashes\n"); + dev->num_flashes = MAX_NUM_FLASH_CHIP; + } + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) { + ret = PTR_ERR(dev->clk); + goto err_clk; + } + + ret = clk_enable(dev->clk); + if (ret) + goto err_clk_enable; + + ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); + if (ret) { + dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n"); + goto err_irq; + } + + mutex_init(&dev->lock); + init_waitqueue_head(&dev->cmd_complete); + spear_smi_hw_init(dev); + platform_set_drvdata(pdev, dev); + + /* loop for each serial nor-flash which is connected to smi */ + for (i = 0; i < dev->num_flashes; i++) { + ret = spear_smi_setup_banks(pdev, i, pdata->np[i]); + if (ret) { + dev_err(&dev->pdev->dev, "bank setup failed\n"); + goto err_bank_setup; + } + } + + return 0; + +err_bank_setup: + free_irq(irq, dev); + platform_set_drvdata(pdev, NULL); +err_irq: + clk_disable(dev->clk); +err_clk_enable: + clk_put(dev->clk); +err_clk: + iounmap(dev->io_base); +err_ioremap: + release_mem_region(smi_base->start, resource_size(smi_base)); +err_mem: + kfree(dev); +err: + return ret; +} + +/** + * spear_smi_remove - Exit routine + * @pdev: platform device structure + * + * free all allocations and delete the partitions. + */ +static int __devexit spear_smi_remove(struct platform_device *pdev) +{ + struct spear_smi *dev; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct resource *smi_base; + int ret; + int i, irq; + + dev = platform_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "dev is null\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + + /* clean up for all nor flash */ + for (i = 0; i < dev->num_flashes; i++) { + flash = dev->flash[i]; + if (!flash) + continue; + + /* clean up mtd stuff */ + ret = mtd_device_unregister(&flash->mtd); + if (ret) + dev_err(&pdev->dev, "error removing mtd\n"); + + iounmap(flash->base_addr); + kfree(flash); + } + + irq = platform_get_irq(pdev, 0); + free_irq(irq, dev); + + clk_disable(dev->clk); + clk_put(dev->clk); + iounmap(dev->io_base); + kfree(dev); + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(smi_base->start, resource_size(smi_base)); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + + if (dev && dev->clk) + clk_disable(dev->clk); + + return 0; +} + +int spear_smi_resume(struct platform_device *pdev) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + int ret = -EPERM; + + if (dev && dev->clk) + ret = clk_enable(dev->clk); + + if (!ret) + spear_smi_hw_init(dev); + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id spear_smi_id_table[] = { + { .compatible = "st,spear600-smi" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_smi_id_table); +#endif + +static struct platform_driver spear_smi_driver = { + .driver = { + .name = "smi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_smi_id_table), + }, + .probe = spear_smi_probe, + .remove = __devexit_p(spear_smi_remove), + .suspend = spear_smi_suspend, + .resume = spear_smi_resume, +}; + +static int spear_smi_init(void) +{ + return platform_driver_register(&spear_smi_driver); +} +module_init(spear_smi_init); + +static void spear_smi_exit(void) +{ + platform_driver_unregister(&spear_smi_driver); +} +module_exit(spear_smi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>"); +MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 5fc198350b94..ab8a2f4c8d60 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -175,9 +175,6 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) int err; /* Sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)instr->len % mtd->erasesize) return -EINVAL; @@ -223,16 +220,6 @@ static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, unsigned char command[4]; int ret; - /* Sanity checking */ - if (len == 0) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - - if (retlen) - *retlen = 0; - spi_message_init(&message); memset(&transfer, 0, sizeof(transfer)); @@ -274,13 +261,6 @@ static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, int i, j, ret, bytes, copied = 0; unsigned char command[5]; - /* Sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)to % mtd->writesize) return -EINVAL; @@ -402,10 +382,11 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.erasesize = flash_info->erase_size; flash->mtd.writesize = flash_info->page_size; + flash->mtd.writebufsize = flash_info->page_size; flash->mtd.size = flash_info->page_size * flash_info->nr_pages; - flash->mtd.erase = sst25l_erase; - flash->mtd.read = sst25l_read; - flash->mtd.write = sst25l_write; + flash->mtd._erase = sst25l_erase; + flash->mtd._read = sst25l_read; + flash->mtd._write = sst25l_write; dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, (long long)flash->mtd.size >> 10); @@ -418,9 +399,9 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.numeraseregions); - ret = mtd_device_parse_register(&flash->mtd, NULL, 0, - data ? data->parts : NULL, - data ? data->nr_parts : 0); + ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, + data ? data->parts : NULL, + data ? data->nr_parts : 0); if (ret) { kfree(flash); dev_set_drvdata(&spi->dev, NULL); @@ -450,18 +431,7 @@ static struct spi_driver sst25l_driver = { .remove = __devexit_p(sst25l_remove), }; -static int __init sst25l_init(void) -{ - return spi_register_driver(&sst25l_driver); -} - -static void __exit sst25l_exit(void) -{ - spi_unregister_driver(&sst25l_driver); -} - -module_init(sst25l_init); -module_exit(sst25l_exit); +module_spi_driver(sst25l_driver); MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " |