3 files changed, 23 insertions, 74 deletions

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 0806f72102c0..a85af236b44d 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -904,9 +904,6 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 	if (ooblen % DOC_LAYOUT_OOB_SIZE)
 		return -EINVAL;
 
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	ops->oobretlen = 0;
 	ops->retlen = 0;
 	ret = 0;
@@ -990,36 +987,6 @@ err_in_read:
 	goto out;
 }
 
-/**
- * doc_read - Read bytes from flash
- * @mtd: the device
- * @from: the offset from first block and first page, in bytes, aligned on page
- *        size
- * @len: the number of bytes to read (must be a multiple of 4)
- * @retlen: the number of bytes actually read
- * @buf: the filled in buffer
- *
- * Reads flash memory pages. This function does not read the OOB chunk, but only
- * the page data.
- *
- * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
- */
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-	     size_t *retlen, u_char *buf)
-{
-	struct mtd_oob_ops ops;
-	size_t ret;
-
-	memset(&ops, 0, sizeof(ops));
-	ops.datbuf = buf;
-	ops.len = len;
-	ops.mode = MTD_OPS_AUTO_OOB;
-
-	ret = doc_read_oob(mtd, from, &ops);
-	*retlen = ops.retlen;
-	return ret;
-}
-
 static int doc_reload_bbt(struct docg3 *docg3)
 {
 	int block = DOC_LAYOUT_BLOCK_BBT;
@@ -1471,8 +1438,6 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 	if (len && ooblen &&
 	    (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta))
 		return -EINVAL;
-	if (ofs + len > mtd->size)
-		return -EINVAL;
 
 	ops->oobretlen = 0;
 	ops->retlen = 0;
@@ -1513,39 +1478,6 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 	return ret;
 }
 
-/**
- * doc_write - Write a buffer to the chip
- * @mtd: the device
- * @to: the offset from first block and first page, in bytes, aligned on page
- *      size
- * @len: the number of bytes to write (must be a full page size, ie. 512)
- * @retlen: the number of bytes actually written (0 or 512)
- * @buf: the buffer to get bytes from
- *
- * Writes data to the chip.
- *
- * Returns 0 if write successful, -EIO if write error
- */
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t *retlen, const u_char *buf)
-{
-	struct docg3 *docg3 = mtd->priv;
-	int ret;
-	struct mtd_oob_ops ops;
-
-	doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len);
-	ops.datbuf = (char *)buf;
-	ops.len = len;
-	ops.mode = MTD_OPS_PLACE_OOB;
-	ops.oobbuf = NULL;
-	ops.ooblen = 0;
-	ops.ooboffs = 0;
-
-	ret = doc_write_oob(mtd, to, &ops);
-	*retlen = ops.retlen;
-	return ret;
-}
-
 static struct docg3 *sysfs_dev2docg3(struct device *dev,
 				     struct device_attribute *attr)
 {
@@ -1866,8 +1798,6 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
 	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
 	mtd->_erase = doc_erase;
-	mtd->_read = doc_read;
-	mtd->_write = doc_write;
 	mtd->_read_oob = doc_read_oob;
 	mtd->_write_oob = doc_write_oob;
 	mtd->_block_isbad = doc_block_isbad;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index dbe6a1de2bb8..a4e18f6aaa33 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -307,10 +307,18 @@ static int m25p_remove(struct spi_device *spi)
 {
 	struct m25p	*flash = spi_get_drvdata(spi);
 
+	spi_nor_restore(&flash->spi_nor);
+
 	/* Clean up MTD stuff. */
 	return mtd_device_unregister(&flash->spi_nor.mtd);
 }
 
+static void m25p_shutdown(struct spi_device *spi)
+{
+	struct m25p *flash = spi_get_drvdata(spi);
+
+	spi_nor_restore(&flash->spi_nor);
+}
 /*
  * Do NOT add to this array without reading the following:
  *
@@ -386,6 +394,7 @@ static struct spi_driver m25p80_driver = {
 	.id_table	= m25p_ids,
 	.probe	= m25p_probe,
 	.remove	= m25p_remove,
+	.shutdown	= m25p_shutdown,
 
 	/* REVISIT: many of these chips have deep power-down modes, which
 	 * should clearly be entered on suspend() to minimize power use.
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index 8956b7dcc984..75f71d166fd6 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -68,6 +68,7 @@ static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct spi_transfer transfer[2] = {};
 	struct spi_message message;
 	unsigned char command[MAX_CMD_SIZE];
+	int ret;
 
 	spi_message_init(&message);
 
@@ -84,12 +85,16 @@ static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	mutex_lock(&flash->lock);
 
-	spi_sync(flash->spi, &message);
+	ret = spi_sync(flash->spi, &message);
+
+	mutex_unlock(&flash->lock);
+
+	if (ret)
+		return ret;
 
 	if (retlen && message.actual_length > sizeof(command))
 		*retlen += message.actual_length - sizeof(command);
 
-	mutex_unlock(&flash->lock);
 	return 0;
 }
 
@@ -100,6 +105,7 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct spi_transfer transfer[2] = {};
 	struct spi_message message;
 	unsigned char command[MAX_CMD_SIZE];
+	int ret;
 
 	spi_message_init(&message);
 
@@ -117,12 +123,16 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 	mutex_lock(&flash->lock);
 
-	spi_sync(flash->spi, &message);
+	ret = spi_sync(flash->spi, &message);
+
+	mutex_unlock(&flash->lock);
+
+	if (ret)
+		return ret;
 
 	if (retlen && message.actual_length > sizeof(command))
 		*retlen += message.actual_length - sizeof(command);
 
-	mutex_unlock(&flash->lock);
 	return 0;
 }