summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-sirf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-sirf.c')
-rw-r--r--drivers/mmc/host/sdhci-sirf.c235
1 files changed, 0 insertions, 235 deletions
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
deleted file mode 100644
index e9b347b3af7e..000000000000
--- a/drivers/mmc/host/sdhci-sirf.c
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SDHCI support for SiRF primaII and marco SoCs
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/mmc/slot-gpio.h>
-#include "sdhci-pltfm.h"
-
-#define SDHCI_CLK_DELAY_SETTING 0x4C
-#define SDHCI_SIRF_8BITBUS BIT(3)
-#define SIRF_TUNING_COUNT 16384
-
-static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
-{
- u8 ctrl;
-
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
- ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS);
-
- /*
- * CSR atlas7 and prima2 SD host version is not 3.0
- * 8bit-width enable bit of CSR SD hosts is 3,
- * while stardard hosts use bit 5
- */
- if (width == MMC_BUS_WIDTH_8)
- ctrl |= SDHCI_SIRF_8BITBUS;
- else if (width == MMC_BUS_WIDTH_4)
- ctrl |= SDHCI_CTRL_4BITBUS;
-
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-}
-
-static u32 sdhci_sirf_readl_le(struct sdhci_host *host, int reg)
-{
- u32 val = readl(host->ioaddr + reg);
-
- if (unlikely((reg == SDHCI_CAPABILITIES_1) &&
- (host->mmc->caps & MMC_CAP_UHS_SDR50))) {
- /* fake CAP_1 register */
- val = SDHCI_SUPPORT_DDR50 |
- SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING;
- }
-
- if (unlikely(reg == SDHCI_SLOT_INT_STATUS)) {
- u32 prss = val;
- /* fake chips as V3.0 host conreoller */
- prss &= ~(0xFF << 16);
- val = prss | (SDHCI_SPEC_300 << 16);
- }
- return val;
-}
-
-static u16 sdhci_sirf_readw_le(struct sdhci_host *host, int reg)
-{
- u16 ret = 0;
-
- ret = readw(host->ioaddr + reg);
-
- if (unlikely(reg == SDHCI_HOST_VERSION)) {
- ret = readw(host->ioaddr + SDHCI_HOST_VERSION);
- ret |= SDHCI_SPEC_300;
- }
-
- return ret;
-}
-
-static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
-{
- int tuning_seq_cnt = 3;
- int phase;
- u8 tuned_phase_cnt = 0;
- int rc = 0, longest_range = 0;
- int start = -1, end = 0, tuning_value = -1, range = 0;
- u16 clock_setting;
- struct mmc_host *mmc = host->mmc;
-
- clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING);
- clock_setting &= ~0x3fff;
-
-retry:
- phase = 0;
- tuned_phase_cnt = 0;
- do {
- sdhci_writel(host,
- clock_setting | phase,
- SDHCI_CLK_DELAY_SETTING);
-
- if (!mmc_send_tuning(mmc, opcode, NULL)) {
- /* Tuning is successful at this tuning point */
- tuned_phase_cnt++;
- dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
- mmc_hostname(mmc), phase);
- if (start == -1)
- start = phase;
- end = phase;
- range++;
- if (phase == (SIRF_TUNING_COUNT - 1)
- && range > longest_range)
- tuning_value = (start + end) / 2;
- } else {
- dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n",
- mmc_hostname(mmc), phase);
- if (range > longest_range) {
- tuning_value = (start + end) / 2;
- longest_range = range;
- }
- start = -1;
- end = range = 0;
- }
- } while (++phase < SIRF_TUNING_COUNT);
-
- if (tuned_phase_cnt && tuning_value > 0) {
- /*
- * Finally set the selected phase in delay
- * line hw block.
- */
- phase = tuning_value;
- sdhci_writel(host,
- clock_setting | phase,
- SDHCI_CLK_DELAY_SETTING);
-
- dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
- mmc_hostname(mmc), phase);
- } else {
- if (--tuning_seq_cnt)
- goto retry;
- /* Tuning failed */
- dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
- mmc_hostname(mmc));
- rc = -EIO;
- }
-
- return rc;
-}
-
-static const struct sdhci_ops sdhci_sirf_ops = {
- .read_l = sdhci_sirf_readl_le,
- .read_w = sdhci_sirf_readw_le,
- .platform_execute_tuning = sdhci_sirf_execute_tuning,
- .set_clock = sdhci_set_clock,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
- .set_bus_width = sdhci_sirf_set_bus_width,
- .reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
-};
-
-static const struct sdhci_pltfm_data sdhci_sirf_pdata = {
- .ops = &sdhci_sirf_ops,
- .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
- SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
-};
-
-static int sdhci_sirf_probe(struct platform_device *pdev)
-{
- struct sdhci_host *host;
- struct sdhci_pltfm_host *pltfm_host;
- struct clk *clk;
- int ret;
-
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get clock");
- return PTR_ERR(clk);
- }
-
- host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0);
- if (IS_ERR(host))
- return PTR_ERR(host);
-
- pltfm_host = sdhci_priv(host);
- pltfm_host->clk = clk;
-
- sdhci_get_of_property(pdev);
-
- ret = clk_prepare_enable(pltfm_host->clk);
- if (ret)
- goto err_clk_prepare;
-
- ret = sdhci_add_host(host);
- if (ret)
- goto err_sdhci_add;
-
- /*
- * We must request the IRQ after sdhci_add_host(), as the tasklet only
- * gets setup in sdhci_add_host() and we oops.
- */
- ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0);
- if (ret == -EPROBE_DEFER)
- goto err_request_cd;
- if (!ret)
- mmc_gpiod_request_cd_irq(host->mmc);
-
- return 0;
-
-err_request_cd:
- sdhci_remove_host(host, 0);
-err_sdhci_add:
- clk_disable_unprepare(pltfm_host->clk);
-err_clk_prepare:
- sdhci_pltfm_free(pdev);
- return ret;
-}
-
-static const struct of_device_id sdhci_sirf_of_match[] = {
- { .compatible = "sirf,prima2-sdhc" },
- { }
-};
-MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
-
-static struct platform_driver sdhci_sirf_driver = {
- .driver = {
- .name = "sdhci-sirf",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .of_match_table = sdhci_sirf_of_match,
- .pm = &sdhci_pltfm_pmops,
- },
- .probe = sdhci_sirf_probe,
- .remove = sdhci_pltfm_unregister,
-};
-
-module_platform_driver(sdhci_sirf_driver);
-
-MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco");
-MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_LICENSE("GPL v2");