diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-of-dwcmshc.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-dwcmshc.c | 112 |
1 files changed, 55 insertions, 57 deletions
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index 7ea3da45db32..a20d03fdd6a9 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/sizes.h> @@ -328,12 +329,17 @@ static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_request(mmc, mrq); } -static void dwcmshc_phy_1_8v_init(struct sdhci_host *host) +static void dwcmshc_phy_init(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 rxsel = PHY_PAD_RXSEL_3V3; u32 val; + if (priv->flags & FLAG_IO_FIXED_1V8 || + host->mmc->ios.timing & MMC_SIGNAL_VOLTAGE_180) + rxsel = PHY_PAD_RXSEL_1V8; + /* deassert phy reset & set tx drive strength */ val = PHY_CNFG_RSTN_DEASSERT; val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP); @@ -353,7 +359,7 @@ static void dwcmshc_phy_1_8v_init(struct sdhci_host *host) sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); /* configure phy pads */ - val = PHY_PAD_RXSEL_1V8; + val = rxsel; val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP); val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); @@ -365,65 +371,22 @@ static void dwcmshc_phy_1_8v_init(struct sdhci_host *host) val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); - val = PHY_PAD_RXSEL_1V8; + val = rxsel; val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN); val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); sdhci_writew(host, val, PHY_STBPAD_CNFG_R); /* enable data strobe mode */ - sdhci_writeb(host, FIELD_PREP(PHY_DLLDL_CNFG_SLV_INPSEL_MASK, PHY_DLLDL_CNFG_SLV_INPSEL), - PHY_DLLDL_CNFG_R); - - /* enable phy dll */ - sdhci_writeb(host, PHY_DLL_CTRL_ENABLE, PHY_DLL_CTRL_R); -} - -static void dwcmshc_phy_3_3v_init(struct sdhci_host *host) -{ - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host); - u32 val; - - /* deassert phy reset & set tx drive strength */ - val = PHY_CNFG_RSTN_DEASSERT; - val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP); - val |= FIELD_PREP(PHY_CNFG_PAD_SN_MASK, PHY_CNFG_PAD_SN); - sdhci_writel(host, val, PHY_CNFG_R); - - /* disable delay line */ - sdhci_writeb(host, PHY_SDCLKDL_CNFG_UPDATE, PHY_SDCLKDL_CNFG_R); - - /* set delay line */ - sdhci_writeb(host, priv->delay_line, PHY_SDCLKDL_DC_R); - sdhci_writeb(host, PHY_DLL_CNFG2_JUMPSTEP, PHY_DLL_CNFG2_R); - - /* enable delay lane */ - val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R); - val &= ~(PHY_SDCLKDL_CNFG_UPDATE); - sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R); - - /* configure phy pads */ - val = PHY_PAD_RXSEL_3V3; - val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP); - val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); - val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); - sdhci_writew(host, val, PHY_CMDPAD_CNFG_R); - sdhci_writew(host, val, PHY_DATAPAD_CNFG_R); - sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R); + if (rxsel == PHY_PAD_RXSEL_1V8) { + u8 sel = FIELD_PREP(PHY_DLLDL_CNFG_SLV_INPSEL_MASK, PHY_DLLDL_CNFG_SLV_INPSEL); - val = FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); - val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); - sdhci_writew(host, val, PHY_CLKPAD_CNFG_R); - - val = PHY_PAD_RXSEL_3V3; - val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN); - val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P); - val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N); - sdhci_writew(host, val, PHY_STBPAD_CNFG_R); + sdhci_writeb(host, sel, PHY_DLLDL_CNFG_R); + } /* enable phy dll */ sdhci_writeb(host, PHY_DLL_CTRL_ENABLE, PHY_DLL_CTRL_R); + } static void th1520_sdhci_set_phy(struct sdhci_host *host) @@ -433,11 +396,7 @@ static void th1520_sdhci_set_phy(struct sdhci_host *host) u32 emmc_caps = MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO; u16 emmc_ctrl; - /* Before power on, set PHY configs */ - if (priv->flags & FLAG_IO_FIXED_1V8) - dwcmshc_phy_1_8v_init(host); - else - dwcmshc_phy_3_3v_init(host); + dwcmshc_phy_init(host); if ((host->mmc->caps2 & emmc_caps) == emmc_caps) { emmc_ctrl = sdhci_readw(host, priv->vendor_specific_area1 + DWCMSHC_EMMC_CONTROL); @@ -787,6 +746,29 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv } } +static void dwcmshc_rk3576_postinit(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) +{ + struct device *dev = mmc_dev(host->mmc); + int ret; + + /* + * This works around the design of the RK3576's power domains, which + * makes the PD_NVM power domain, which the sdhci controller on the + * RK3576 is in, never come back the same way once it's run-time + * suspended once. This can happen during early kernel boot if no driver + * is using either PD_NVM or its child power domain PD_SDGMAC for a + * short moment, leading to it being turned off to save power. By + * keeping it on, sdhci suspending won't lead to PD_NVM becoming a + * candidate for getting turned off. + */ + ret = dev_pm_genpd_rpm_always_on(dev, true); + if (ret && ret != -EOPNOTSUPP) + dev_warn(dev, "failed to set PD rpm always on, SoC may hang later: %pe\n", + ERR_PTR(ret)); + + dwcmshc_rk35xx_postinit(host, dwc_priv); +} + static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -1163,7 +1145,7 @@ static const struct sdhci_ops sdhci_dwcmshc_th1520_ops = { .get_max_clock = dwcmshc_get_max_clock, .reset = th1520_sdhci_reset, .adma_write_desc = dwcmshc_adma_write_desc, - .voltage_switch = dwcmshc_phy_1_8v_init, + .voltage_switch = dwcmshc_phy_init, .platform_execute_tuning = th1520_execute_tuning, }; @@ -1218,6 +1200,18 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { .postinit = dwcmshc_rk35xx_postinit, }; +static const struct dwcmshc_pltfm_data sdhci_dwcmshc_rk3576_pdata = { + .pdata = { + .ops = &sdhci_dwcmshc_rk35xx_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, + }, + .init = dwcmshc_rk35xx_init, + .postinit = dwcmshc_rk3576_postinit, +}; + static const struct dwcmshc_pltfm_data sdhci_dwcmshc_th1520_pdata = { .pdata = { .ops = &sdhci_dwcmshc_th1520_ops, @@ -1317,6 +1311,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { .data = &sdhci_dwcmshc_rk35xx_pdata, }, { + .compatible = "rockchip,rk3576-dwcmshc", + .data = &sdhci_dwcmshc_rk3576_pdata, + }, + { .compatible = "rockchip,rk3568-dwcmshc", .data = &sdhci_dwcmshc_rk35xx_pdata, }, |