diff options
Diffstat (limited to 'drivers/misc/mic/host/mic_x100.c')
| -rw-r--r-- | drivers/misc/mic/host/mic_x100.c | 585 |
1 files changed, 0 insertions, 585 deletions
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c deleted file mode 100644 index f5536c1ad607..000000000000 --- a/drivers/misc/mic/host/mic_x100.c +++ /dev/null @@ -1,585 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * Intel MIC Host driver. - */ -#include <linux/fs.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/firmware.h> -#include <linux/delay.h> - -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_x100.h" -#include "mic_smpt.h" - -static const u16 mic_x100_intr_init[] = { - MIC_X100_DOORBELL_IDX_START, - MIC_X100_DMA_IDX_START, - MIC_X100_ERR_IDX_START, - MIC_X100_NUM_DOORBELL, - MIC_X100_NUM_DMA, - MIC_X100_NUM_ERR, -}; - -/** - * mic_x100_write_spad - write to the scratchpad register - * @mdev: pointer to mic_device instance - * @idx: index to the scratchpad register, 0 based - * @val: the data value to put into the register - * - * This function allows writing of a 32bit value to the indexed scratchpad - * register. - * - * RETURNS: none. - */ -static void -mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val) -{ - dev_dbg(&mdev->pdev->dev, "Writing 0x%x to scratch pad index %d\n", - val, idx); - mic_mmio_write(&mdev->mmio, val, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SPAD0 + idx * 4); -} - -/** - * mic_x100_read_spad - read from the scratchpad register - * @mdev: pointer to mic_device instance - * @idx: index to scratchpad register, 0 based - * - * This function allows reading of the 32bit scratchpad register. - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static u32 -mic_x100_read_spad(struct mic_device *mdev, unsigned int idx) -{ - u32 val = mic_mmio_read(&mdev->mmio, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SPAD0 + idx * 4); - - dev_dbg(&mdev->pdev->dev, - "Reading 0x%x from scratch pad index %d\n", val, idx); - return val; -} - -/** - * mic_x100_enable_interrupts - Enable interrupts. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_enable_interrupts(struct mic_device *mdev) -{ - u32 reg; - struct mic_mw *mw = &mdev->mmio; - u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; - u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; - - reg = mic_mmio_read(mw, sice0); - reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff); - mic_mmio_write(mw, reg, sice0); - - /* - * Enable auto-clear when enabling interrupts. Applicable only for - * MSI-x. Legacy and MSI mode cannot have auto-clear enabled. - */ - if (mdev->irq_info.num_vectors > 1) { - reg = mic_mmio_read(mw, siac0); - reg |= MIC_X100_SBOX_DBR_BITS(0xf) | - MIC_X100_SBOX_DMA_BITS(0xff); - mic_mmio_write(mw, reg, siac0); - } -} - -/** - * mic_x100_disable_interrupts - Disable interrupts. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_disable_interrupts(struct mic_device *mdev) -{ - u32 reg; - struct mic_mw *mw = &mdev->mmio; - u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; - u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; - u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0; - - reg = mic_mmio_read(mw, sice0); - mic_mmio_write(mw, reg, sicc0); - - if (mdev->irq_info.num_vectors > 1) { - reg = mic_mmio_read(mw, siac0); - reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) | - MIC_X100_SBOX_DMA_BITS(0xff)); - mic_mmio_write(mw, reg, siac0); - } -} - -/** - * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number - */ -static void mic_x100_send_sbox_intr(struct mic_device *mdev, - int doorbell) -{ - struct mic_mw *mw = &mdev->mmio; - u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8; - u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS + - apic_icr_offset); - - /* for MIC we need to make sure we "hit" the send_icr bit (13) */ - apicicr_low = (apicicr_low | (1 << 13)); - - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(mw, apicicr_low, - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); -} - -/** - * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number - */ -static void mic_x100_send_rdmasr_intr(struct mic_device *mdev, - int doorbell) -{ - int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2); - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(&mdev->mmio, 0, - MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset); -} - -/** - * __mic_x100_send_intr - Send interrupt to MIC. - * @mdev: pointer to mic_device instance - * @doorbell: doorbell number. - */ -static void mic_x100_send_intr(struct mic_device *mdev, int doorbell) -{ - int rdmasr_db; - if (doorbell < MIC_X100_NUM_SBOX_IRQ) { - mic_x100_send_sbox_intr(mdev, doorbell); - } else { - rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ; - mic_x100_send_rdmasr_intr(mdev, rdmasr_db); - } -} - -/** - * mic_x100_ack_interrupt - Read the interrupt sources register and - * clear it. This function will be called in the MSI/INTx case. - * @mdev: Pointer to mic_device instance. - * - * Returns: bitmask of interrupt sources triggered. - */ -static u32 mic_x100_ack_interrupt(struct mic_device *mdev) -{ - u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0; - u32 reg = mic_mmio_read(&mdev->mmio, sicr0); - mic_mmio_write(&mdev->mmio, reg, sicr0); - return reg; -} - -/** - * mic_x100_intr_workarounds - These hardware specific workarounds are - * to be invoked everytime an interrupt is handled. - * @mdev: Pointer to mic_device instance. - * - * Returns: none - */ -static void mic_x100_intr_workarounds(struct mic_device *mdev) -{ - struct mic_mw *mw = &mdev->mmio; - - /* Clear pending bit array. */ - if (MIC_A0_STEP == mdev->stepping) - mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MSIXPBACR); - - if (mdev->stepping >= MIC_B0_STEP) - mdev->intr_ops->enable_interrupts(mdev); -} - -/** - * mic_x100_hw_intr_init - Initialize h/w specific interrupt - * information. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_hw_intr_init(struct mic_device *mdev) -{ - mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init; -} - -/** - * mic_x100_read_msi_to_src_map - read from the MSI mapping registers - * @mdev: pointer to mic_device instance - * @idx: index to the mapping register, 0 based - * - * This function allows reading of the 32bit MSI mapping register. - * - * RETURNS: The value in the register. - */ -static u32 -mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx) -{ - return mic_mmio_read(&mdev->mmio, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MXAR0 + idx * 4); -} - -/** - * mic_x100_program_msi_to_src_map - program the MSI mapping registers - * @mdev: pointer to mic_device instance - * @idx: index to the mapping register, 0 based - * @offset: The bit offset in the register that needs to be updated. - * @set: boolean specifying if the bit in the specified offset needs - * to be set or cleared. - * - * RETURNS: None. - */ -static void -mic_x100_program_msi_to_src_map(struct mic_device *mdev, - int idx, int offset, bool set) -{ - unsigned long reg; - struct mic_mw *mw = &mdev->mmio; - u32 mxar = MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_MXAR0 + idx * 4; - - reg = mic_mmio_read(mw, mxar); - if (set) - __set_bit(offset, ®); - else - __clear_bit(offset, ®); - mic_mmio_write(mw, reg, mxar); -} - -/* - * mic_x100_reset_fw_ready - Reset Firmware ready status field. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_reset_fw_ready(struct mic_device *mdev) -{ - mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0); -} - -/* - * mic_x100_is_fw_ready - Check if firmware is ready. - * @mdev: pointer to mic_device instance - */ -static bool mic_x100_is_fw_ready(struct mic_device *mdev) -{ - u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false; -} - -/** - * mic_x100_get_apic_id - Get bootstrap APIC ID. - * @mdev: pointer to mic_device instance - */ -static u32 mic_x100_get_apic_id(struct mic_device *mdev) -{ - u32 scratch2 = 0; - - scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - return MIC_X100_SPAD2_APIC_ID(scratch2); -} - -/** - * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_send_firmware_intr(struct mic_device *mdev) -{ - u32 apicicr_low; - u64 apic_icr_offset = MIC_X100_SBOX_APICICR7; - int vector = MIC_X100_BSP_INTERRUPT_VECTOR; - struct mic_mw *mw = &mdev->mmio; - - /* - * For MIC we need to make sure we "hit" - * the send_icr bit (13). - */ - apicicr_low = (vector | (1 << 13)); - - mic_mmio_write(mw, mic_x100_get_apic_id(mdev), - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4); - - /* Ensure that the interrupt is ordered w.r.t. previous stores. */ - wmb(); - mic_mmio_write(mw, apicicr_low, - MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); -} - -/** - * mic_x100_hw_reset - Reset the MIC device. - * @mdev: pointer to mic_device instance - */ -static void mic_x100_hw_reset(struct mic_device *mdev) -{ - u32 reset_reg; - u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR; - struct mic_mw *mw = &mdev->mmio; - - /* Ensure that the reset is ordered w.r.t. previous loads and stores */ - mb(); - /* Trigger reset */ - reset_reg = mic_mmio_read(mw, rgcr); - reset_reg |= 0x1; - mic_mmio_write(mw, reset_reg, rgcr); - /* - * It seems we really want to delay at least 1 second - * after touching reset to prevent a lot of problems. - */ - msleep(1000); -} - -/** - * mic_x100_load_command_line - Load command line to MIC. - * @mdev: pointer to mic_device instance - * @fw: the firmware image - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw) -{ - u32 len = 0; - u32 boot_mem; - char *buf; - void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size; -#define CMDLINE_SIZE 2048 - - boot_mem = mdev->aper.len >> 20; - buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - len += scnprintf(buf, CMDLINE_SIZE - len, - " mem=%dM", boot_mem); - if (mdev->cosm_dev->cmdline) - scnprintf(buf + len, CMDLINE_SIZE - len, " %s", - mdev->cosm_dev->cmdline); - memcpy_toio(cmd_line_va, buf, strlen(buf) + 1); - kfree(buf); - return 0; -} - -/** - * mic_x100_load_ramdisk - Load ramdisk to MIC. - * @mdev: pointer to mic_device instance - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_ramdisk(struct mic_device *mdev) -{ - const struct firmware *fw; - int rc; - struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr; - - rc = request_firmware(&fw, mdev->cosm_dev->ramdisk, &mdev->pdev->dev); - if (rc < 0) { - dev_err(&mdev->pdev->dev, - "ramdisk request_firmware failed: %d %s\n", - rc, mdev->cosm_dev->ramdisk); - goto error; - } - /* - * Typically the bootaddr for card OS is 64M - * so copy over the ramdisk @ 128M. - */ - memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); - iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); - iowrite32(fw->size, &bp->hdr.ramdisk_size); - release_firmware(fw); -error: - return rc; -} - -/** - * mic_x100_get_boot_addr - Get MIC boot address. - * @mdev: pointer to mic_device instance - * - * This function is called during firmware load to determine - * the address at which the OS should be downloaded in card - * memory i.e. GDDR. - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_get_boot_addr(struct mic_device *mdev) -{ - u32 scratch2, boot_addr; - int rc = 0; - - scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); - boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2); - dev_dbg(&mdev->pdev->dev, "%s %d boot_addr 0x%x\n", - __func__, __LINE__, boot_addr); - if (boot_addr > (1 << 31)) { - dev_err(&mdev->pdev->dev, - "incorrect bootaddr 0x%x\n", - boot_addr); - rc = -EINVAL; - goto error; - } - mdev->bootaddr = boot_addr; -error: - return rc; -} - -/** - * mic_x100_load_firmware - Load firmware to MIC. - * @mdev: pointer to mic_device instance - * @buf: buffer containing boot string including firmware/ramdisk path. - * - * RETURNS: An appropriate -ERRNO error value on error, or zero for success. - */ -static int -mic_x100_load_firmware(struct mic_device *mdev, const char *buf) -{ - int rc; - const struct firmware *fw; - - rc = mic_x100_get_boot_addr(mdev); - if (rc) - return rc; - /* load OS */ - rc = request_firmware(&fw, mdev->cosm_dev->firmware, &mdev->pdev->dev); - if (rc < 0) { - dev_err(&mdev->pdev->dev, - "ramdisk request_firmware failed: %d %s\n", - rc, mdev->cosm_dev->firmware); - return rc; - } - if (mdev->bootaddr > mdev->aper.len - fw->size) { - rc = -EINVAL; - dev_err(&mdev->pdev->dev, "%s %d rc %d bootaddr 0x%x\n", - __func__, __LINE__, rc, mdev->bootaddr); - goto error; - } - memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size); - mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size); - if (!strcmp(mdev->cosm_dev->bootmode, "flash")) { - rc = -EINVAL; - dev_err(&mdev->pdev->dev, "%s %d rc %d\n", - __func__, __LINE__, rc); - goto error; - } - /* load command line */ - rc = mic_x100_load_command_line(mdev, fw); - if (rc) { - dev_err(&mdev->pdev->dev, "%s %d rc %d\n", - __func__, __LINE__, rc); - goto error; - } - release_firmware(fw); - /* load ramdisk */ - if (mdev->cosm_dev->ramdisk) - rc = mic_x100_load_ramdisk(mdev); - - return rc; - -error: - release_firmware(fw); - return rc; -} - -/** - * mic_x100_get_postcode - Get postcode status from firmware. - * @mdev: pointer to mic_device instance - * - * RETURNS: postcode. - */ -static u32 mic_x100_get_postcode(struct mic_device *mdev) -{ - return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE); -} - -/** - * mic_x100_smpt_set - Update an SMPT entry with a DMA address. - * @mdev: pointer to mic_device instance - * @dma_addr: DMA address to use - * @index: entry to write to - * - * RETURNS: none. - */ -static void -mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index) -{ -#define SNOOP_ON (0 << 0) -#define SNOOP_OFF (1 << 0) -/* - * Sbox Smpt Reg Bits: - * Bits 31:2 Host address - * Bits 1 RSVD - * Bits 0 No snoop - */ -#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \ - (u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01)) - - uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON, - dma_addr >> mdev->smpt->info.page_shift); - mic_mmio_write(&mdev->mmio, smpt_reg_val, - MIC_X100_SBOX_BASE_ADDRESS + - MIC_X100_SBOX_SMPT00 + (4 * index)); -} - -/** - * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields. - * @mdev: pointer to mic_device instance - * - * RETURNS: none. - */ -static void mic_x100_smpt_hw_init(struct mic_device *mdev) -{ - struct mic_smpt_hw_info *info = &mdev->smpt->info; - - info->num_reg = 32; - info->page_shift = 34; - info->page_size = (1ULL << info->page_shift); - info->base = 0x8000000000ULL; -} - -struct mic_smpt_ops mic_x100_smpt_ops = { - .init = mic_x100_smpt_hw_init, - .set = mic_x100_smpt_set, -}; - -static bool mic_x100_dma_filter(struct dma_chan *chan, void *param) -{ - if (chan->device->dev->parent == (struct device *)param) - return true; - return false; -} - -struct mic_hw_ops mic_x100_ops = { - .aper_bar = MIC_X100_APER_BAR, - .mmio_bar = MIC_X100_MMIO_BAR, - .read_spad = mic_x100_read_spad, - .write_spad = mic_x100_write_spad, - .send_intr = mic_x100_send_intr, - .ack_interrupt = mic_x100_ack_interrupt, - .intr_workarounds = mic_x100_intr_workarounds, - .reset = mic_x100_hw_reset, - .reset_fw_ready = mic_x100_reset_fw_ready, - .is_fw_ready = mic_x100_is_fw_ready, - .send_firmware_intr = mic_x100_send_firmware_intr, - .load_mic_fw = mic_x100_load_firmware, - .get_postcode = mic_x100_get_postcode, - .dma_filter = mic_x100_dma_filter, -}; - -struct mic_hw_intr_ops mic_x100_intr_ops = { - .intr_init = mic_x100_hw_intr_init, - .enable_interrupts = mic_x100_enable_interrupts, - .disable_interrupts = mic_x100_disable_interrupts, - .program_msi_to_src_map = mic_x100_program_msi_to_src_map, - .read_msi_to_src_map = mic_x100_read_msi_to_src_map, -}; |