diff options
Diffstat (limited to 'drivers/misc/Kconfig')
| -rw-r--r-- | drivers/misc/Kconfig | 49 |
1 files changed, 27 insertions, 22 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 64971baf11fa..c290990d73ed 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -474,11 +474,15 @@ config SRAM bool "Generic on-chip SRAM driver" depends on HAS_IOMEM select GENERIC_ALLOCATOR + select SRAM_EXEC if ARM help This driver allows you to declare a memory region to be managed by the genalloc API. It is supposed to be used for small on-chip SRAM areas found on many SoCs. +config SRAM_EXEC + bool + config VEXPRESS_SYSCFG bool "Versatile Express System Configuration driver" depends on VEXPRESS_CONFIG @@ -487,6 +491,7 @@ config VEXPRESS_SYSCFG ARM Ltd. Versatile Express uses specialised platform configuration bus. System Configuration interface is one of the possible means of generating transactions on this bus. + config PANEL tristate "Parallel port LCD/Keypad Panel support" depends on PARPORT @@ -494,14 +499,14 @@ config PANEL Say Y here if you have an HD44780 or KS-0074 LCD connected to your parallel port. This driver also features 4 and 6-key keypads. The LCD is accessible through the /dev/lcd char device (10, 156), and the - keypad through /dev/keypad (10, 185). Both require misc device to be - enabled. This code can either be compiled as a module, or linked into - the kernel and started at boot. If you don't understand what all this - is about, say N. + keypad through /dev/keypad (10, 185). This code can either be + compiled as a module, or linked into the kernel and started at boot. + If you don't understand what all this is about, say N. + +if PANEL config PANEL_PARPORT int "Default parallel port number (0=LPT1)" - depends on PANEL range 0 255 default "0" ---help--- @@ -513,7 +518,6 @@ config PANEL_PARPORT config PANEL_PROFILE int "Default panel profile (0-5, 0=custom)" - depends on PANEL range 0 5 default "5" ---help--- @@ -534,7 +538,7 @@ config PANEL_PROFILE for experts. config PANEL_KEYPAD - depends on PANEL && PANEL_PROFILE="0" + depends on PANEL_PROFILE="0" int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" range 0 3 default 0 @@ -551,7 +555,7 @@ config PANEL_KEYPAD supports simultaneous keys pressed when the keypad supports them. config PANEL_LCD - depends on PANEL && PANEL_PROFILE="0" + depends on PANEL_PROFILE="0" int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" range 0 5 default 0 @@ -574,7 +578,7 @@ config PANEL_LCD that those values changed from the 2.4 driver for better consistency. config PANEL_LCD_HEIGHT - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Number of lines on the LCD (1-2)" range 1 2 default 2 @@ -583,7 +587,7 @@ config PANEL_LCD_HEIGHT It can either be 1 or 2. config PANEL_LCD_WIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Number of characters per line on the LCD (1-40)" range 1 40 default 40 @@ -592,7 +596,7 @@ config PANEL_LCD_WIDTH Common values are 16,20,24,40. config PANEL_LCD_BWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Internal LCD line width (1-40, 40 by default)" range 1 40 default 40 @@ -608,7 +612,7 @@ config PANEL_LCD_BWIDTH If you don't know, put '40' here. config PANEL_LCD_HWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Hardware LCD line width (1-64, 64 by default)" range 1 64 default 64 @@ -622,7 +626,7 @@ config PANEL_LCD_HWIDTH 64 here for a 2x40. config PANEL_LCD_CHARSET - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "LCD character set (0=normal, 1=KS0074)" range 0 1 default 0 @@ -638,7 +642,7 @@ config PANEL_LCD_CHARSET If you don't know, use the normal one (0). config PANEL_LCD_PROTO - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "LCD communication mode (0=parallel 8 bits, 1=serial)" range 0 1 default 0 @@ -651,7 +655,7 @@ config PANEL_LCD_PROTO parallel LCD, and 1 for a serial LCD. config PANEL_LCD_PIN_E - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " range -17 17 default 14 @@ -666,7 +670,7 @@ config PANEL_LCD_PIN_E Default for the 'E' pin in custom profile is '14' (AUTOFEED). config PANEL_LCD_PIN_RS - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " range -17 17 default 17 @@ -681,7 +685,7 @@ config PANEL_LCD_PIN_RS Default for the 'RS' pin in custom profile is '17' (SELECT IN). config PANEL_LCD_PIN_RW - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " range -17 17 default 16 @@ -696,7 +700,7 @@ config PANEL_LCD_PIN_RW Default for the 'RW' pin in custom profile is '16' (INIT). config PANEL_LCD_PIN_SCL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " range -17 17 default 1 @@ -711,7 +715,7 @@ config PANEL_LCD_PIN_SCL Default for the 'SCL' pin in custom profile is '1' (STROBE). config PANEL_LCD_PIN_SDA - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " range -17 17 default 2 @@ -726,7 +730,7 @@ config PANEL_LCD_PIN_SDA Default for the 'SDA' pin in custom profile is '2' (D0). config PANEL_LCD_PIN_BL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " range -17 17 default 0 @@ -741,7 +745,6 @@ config PANEL_LCD_PIN_BL Default for the 'BL' pin in custom profile is '0' (uncontrolled). config PANEL_CHANGE_MESSAGE - depends on PANEL bool "Change LCD initialization message ?" default "n" ---help--- @@ -754,7 +757,7 @@ config PANEL_CHANGE_MESSAGE say 'N' and keep the default message with the version. config PANEL_BOOT_MESSAGE - depends on PANEL && PANEL_CHANGE_MESSAGE="y" + depends on PANEL_CHANGE_MESSAGE="y" string "New initialization message" default "" ---help--- @@ -766,6 +769,8 @@ config PANEL_BOOT_MESSAGE An empty message will only clear the display at driver init time. Any other printf()-formatted message is valid with newline and escape codes. +endif # PANEL + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" |