summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig57
-rw-r--r--drivers/mfd/Makefile3
-rw-r--r--drivers/mfd/ab8500-core.c6
-rw-r--r--drivers/mfd/atmel-smc.c67
-rw-r--r--drivers/mfd/axp20x-rsb.c1
-rw-r--r--drivers/mfd/axp20x.c32
-rw-r--r--drivers/mfd/bd9571mwv.c230
-rw-r--r--drivers/mfd/da9052-core.c2
-rw-r--r--drivers/mfd/da9052-spi.c2
-rw-r--r--drivers/mfd/da9055-i2c.c2
-rw-r--r--drivers/mfd/dm355evm_msp.c2
-rw-r--r--drivers/mfd/hi6421-pmic-core.c89
-rw-r--r--drivers/mfd/intel-lpss-pci.c1
-rw-r--r--drivers/mfd/intel-lpss.c8
-rw-r--r--drivers/mfd/intel_soc_pmic_core.c34
-rw-r--r--drivers/mfd/intel_soc_pmic_core.h3
-rw-r--r--drivers/mfd/intel_soc_pmic_crc.c27
-rw-r--r--drivers/mfd/lp87565.c7
-rw-r--r--drivers/mfd/lpc_ich.c10
-rw-r--r--drivers/mfd/max8925-i2c.c2
-rw-r--r--drivers/mfd/max8998.c6
-rw-r--r--drivers/mfd/omap-usb-tll.c4
-rw-r--r--drivers/mfd/retu-mfd.c12
-rw-r--r--drivers/mfd/rk808.c147
-rw-r--r--drivers/mfd/rtsx_pcr.c4
-rw-r--r--drivers/mfd/stm32-lptimer.c107
-rw-r--r--drivers/mfd/t7l66xb.c17
-rw-r--r--drivers/mfd/tps6105x.c8
-rw-r--r--drivers/mfd/tps65010.c2
-rw-r--r--drivers/mfd/tps68470.c106
-rw-r--r--drivers/mfd/twl-core.c10
-rw-r--r--drivers/mfd/twl4030-audio.c2
-rw-r--r--drivers/mfd/twl4030-irq.c2
-rw-r--r--drivers/mfd/twl4030-power.c2
-rw-r--r--drivers/mfd/twl6030-irq.c2
35 files changed, 899 insertions, 117 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 94ad2c1c3d90..fc5e4fef89d2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -133,6 +133,20 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
+config MFD_BD9571MWV
+ tristate "ROHM BD9571MWV PMIC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C
+ help
+ Support for the ROHM BD9571MWV PMIC, which contains single
+ voltage regulator, voltage sampling units, GPIO block and
+ watchdog block.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd9571mwv.
+
config MFD_AC100
tristate "X-Powers AC100"
select MFD_CORE
@@ -453,12 +467,12 @@ config LPC_SCH
config INTEL_SOC_PMIC
bool "Support for Crystal Cove PMIC"
- depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+ depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
depends on X86 || COMPILE_TEST
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- select I2C_DESIGNWARE_PLATFORM if ACPI
+ select I2C_DESIGNWARE_PLATFORM
help
Select this option to enable support for Crystal Cove PMIC
on some Intel SoC systems. The PMIC provides ADC, GPIO,
@@ -481,7 +495,7 @@ config INTEL_SOC_PMIC_BXTWC
on these systems.
config INTEL_SOC_PMIC_CHTWC
- tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
+ bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
depends on X86 || COMPILE_TEST
select MFD_CORE
@@ -951,13 +965,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808/RK818 Power Management Chip"
+ tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808 and RK818
+ If you say yes here you get support for the RK805, RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
@@ -1294,6 +1308,7 @@ config TPS6507X
config MFD_TPS65086
tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
+ select MFD_CORE
select REGMAP
select REGMAP_IRQ
select REGMAP_I2C
@@ -1337,6 +1352,24 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_TPS68470
+ bool "TI TPS68470 Power Management / LED chips"
+ depends on ACPI && I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select I2C_DESIGNWARE_PLATFORM
+ help
+ If you say yes here you get support for the TPS68470 series of
+ Power Management / LED chips.
+
+ These include voltage regulators, LEDs and other features
+ that are often used in portable devices.
+
+ This option is a bool as it provides an ACPI operation
+ region, which must be available before any of the devices
+ using this are probed. This option also configures the
+ designware-i2c driver to be built-in, for the same reason.
+
config MFD_TI_LP873X
tristate "TI LP873X Power Management IC"
depends on I2C
@@ -1723,6 +1756,20 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
+config MFD_STM32_LPTIMER
+ tristate "Support for STM32 Low-Power Timer"
+ depends on (ARCH_STM32 && OF) || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP
+ select REGMAP_MMIO
+ help
+ Select this option to enable STM32 Low-Power Timer driver
+ used for PWM, IIO Trigger, IIO Encoder and Counter. Shared
+ resources are also dealt with here.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stm32-lptimer.
+
config MFD_STM32_TIMERS
tristate "Support for STM32 Timers"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 080793b3fd0e..c3d0a1b39bb6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
+obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o
cros_ec_core-objs := cros_ec.o
cros_ec_core-$(CONFIG_ACPI) += cros_ec_acpi_gpe.o
obj-$(CONFIG_MFD_CROS_EC) += cros_ec_core.o
@@ -83,6 +84,7 @@ obj-$(CONFIG_MFD_TPS65910) += tps65910.o
obj-$(CONFIG_MFD_TPS65912) += tps65912-core.o
obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
+obj-$(CONFIG_MFD_TPS68470) += tps68470.o
obj-$(CONFIG_MFD_TPS80031) += tps80031.o
obj-$(CONFIG_MENELAUS) += menelaus.o
@@ -221,5 +223,6 @@ obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
+obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 8511c068a610..30d09d177171 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1059,15 +1059,15 @@ static struct attribute *ab9540_sysfs_entries[] = {
NULL,
};
-static struct attribute_group ab8500_attr_group = {
+static const struct attribute_group ab8500_attr_group = {
.attrs = ab8500_sysfs_entries,
};
-static struct attribute_group ab8505_attr_group = {
+static const struct attribute_group ab8505_attr_group = {
.attrs = ab8505_sysfs_entries,
};
-static struct attribute_group ab9540_attr_group = {
+static const struct attribute_group ab9540_attr_group = {
.attrs = ab9540_sysfs_entries,
};
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
index 20cc0ea470fa..7d77948567d7 100644
--- a/drivers/mfd/atmel-smc.c
+++ b/drivers/mfd/atmel-smc.c
@@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
* atmel_hsmc_cs_conf_apply - apply an SMC CS conf
* @regmap: the HSMC regmap
* @cs: the CS id
+ * @layout: the layout of registers
* @conf the SMC CS conf to apply
*
* Applies an SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, const struct atmel_smc_cs_conf *conf)
{
- regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
- regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
- regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
- regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
- regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+ regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
@@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
* atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
* @regmap: the HSMC regmap
* @cs: the CS id
+ * @layout: the layout of registers
* @conf: the SMC CS conf object to store the current conf
*
* Retrieve the SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, struct atmel_smc_cs_conf *conf)
{
- regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
- regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
- regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
- regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
- regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+ regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
+
+static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
+ .timing_regs_offset = 0x600,
+};
+
+static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
+ .timing_regs_offset = 0x700,
+};
+
+static const struct of_device_id atmel_smc_ids[] = {
+ { .compatible = "atmel,at91sam9260-smc", .data = NULL },
+ { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout },
+ { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout },
+ { /* sentinel */ },
+};
+
+/**
+ * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
+ * @np: the HSMC regmap
+ *
+ * Retrieve the layout of HSMC registers.
+ *
+ * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
+ * in HSMC case, otherwise ERR_PTR(-EINVAL).
+ */
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(atmel_smc_ids, np);
+
+ return match ? match->data : ERR_PTR(-EINVAL);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout);
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
index fd5c7267b136..7ddbd9e8dd03 100644
--- a/drivers/mfd/axp20x-rsb.c
+++ b/drivers/mfd/axp20x-rsb.c
@@ -64,6 +64,7 @@ static const struct of_device_id axp20x_rsb_of_match[] = {
{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
{ .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
+ { .compatible = "x-powers,axp813", .data = (void *)AXP813_ID },
{ },
};
MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 917b6ddc4f15..336de66ca408 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -44,6 +44,7 @@ static const char * const axp20x_model_names[] = {
"AXP803",
"AXP806",
"AXP809",
+ "AXP813",
};
static const struct regmap_range axp152_writeable_ranges[] = {
@@ -676,7 +677,7 @@ static struct mfd_cell axp20x_cells[] = {
static struct mfd_cell axp221_cells[] = {
{
- .name = "axp20x-pek",
+ .name = "axp221-pek",
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
.resources = axp22x_pek_resources,
}, {
@@ -701,7 +702,7 @@ static struct mfd_cell axp221_cells[] = {
static struct mfd_cell axp223_cells[] = {
{
- .name = "axp20x-pek",
+ .name = "axp221-pek",
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
.resources = axp22x_pek_resources,
}, {
@@ -834,7 +835,7 @@ static struct mfd_cell axp288_cells[] = {
.resources = axp288_fuel_gauge_resources,
},
{
- .name = "axp20x-pek",
+ .name = "axp221-pek",
.num_resources = ARRAY_SIZE(axp288_power_button_resources),
.resources = axp288_power_button_resources,
},
@@ -845,7 +846,7 @@ static struct mfd_cell axp288_cells[] = {
static struct mfd_cell axp803_cells[] = {
{
- .name = "axp20x-pek",
+ .name = "axp221-pek",
.num_resources = ARRAY_SIZE(axp803_pek_resources),
.resources = axp803_pek_resources,
},
@@ -861,7 +862,7 @@ static struct mfd_cell axp806_cells[] = {
static struct mfd_cell axp809_cells[] = {
{
- .name = "axp20x-pek",
+ .name = "axp221-pek",
.num_resources = ARRAY_SIZE(axp809_pek_resources),
.resources = axp809_pek_resources,
}, {
@@ -870,6 +871,14 @@ static struct mfd_cell axp809_cells[] = {
},
};
+static struct mfd_cell axp813_cells[] = {
+ {
+ .name = "axp221-pek",
+ .num_resources = ARRAY_SIZE(axp803_pek_resources),
+ .resources = axp803_pek_resources,
+ }
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
@@ -956,6 +965,19 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp22x_regmap_config;
axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
break;
+ case AXP813_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp813_cells);
+ axp20x->cells = axp813_cells;
+ axp20x->regmap_cfg = &axp288_regmap_config;
+ /*
+ * The IRQ table given in the datasheet is incorrect.
+ * In IRQ enable/status registers 1, there are separate
+ * IRQs for ACIN and VBUS, instead of bits [7:5] being
+ * the same as bits [4:2]. So it shares the same IRQs
+ * as the AXP803, rather than the AXP288.
+ */
+ axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
+ break;
default:
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
return -EINVAL;
diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
new file mode 100644
index 000000000000..64e088dfe7b0
--- /dev/null
+++ b/drivers/mfd/bd9571mwv.c
@@ -0,0 +1,230 @@
+/*
+ * ROHM BD9571MWV-M MFD driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65086 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+static const struct mfd_cell bd9571mwv_cells[] = {
+ { .name = "bd9571mwv-regulator", },
+ { .name = "bd9571mwv-gpio", },
+};
+
+static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+ regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
+ regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
+ regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
+ regmap_reg_range(BD9571MWV_DVFS_SETVMAX, BD9571MWV_DVFS_MONIVDAC),
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9571mwv_readable_table = {
+ .yes_ranges = bd9571mwv_readable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_readable_yes_ranges),
+};
+
+static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
+ regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
+ regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
+ regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9571mwv_writable_table = {
+ .yes_ranges = bd9571mwv_writable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_writable_yes_ranges),
+};
+
+static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
+};
+
+static const struct regmap_access_table bd9571mwv_volatile_table = {
+ .yes_ranges = bd9571mwv_volatile_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9571mwv_volatile_yes_ranges),
+};
+
+static const struct regmap_config bd9571mwv_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &bd9571mwv_readable_table,
+ .wr_table = &bd9571mwv_writable_table,
+ .volatile_table = &bd9571mwv_volatile_table,
+ .max_register = 0xff,
+};
+
+static const struct regmap_irq bd9571mwv_irqs[] = {
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD1, 0,
+ BD9571MWV_INT_INTREQ_MD1_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E1, 0,
+ BD9571MWV_INT_INTREQ_MD2_E1_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E2, 0,
+ BD9571MWV_INT_INTREQ_MD2_E2_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_PROT_ERR, 0,
+ BD9571MWV_INT_INTREQ_PROT_ERR_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_GP, 0,
+ BD9571MWV_INT_INTREQ_GP_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_128H_OF, 0,
+ BD9571MWV_INT_INTREQ_128H_OF_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_WDT_OF, 0,
+ BD9571MWV_INT_INTREQ_WDT_OF_INT),
+ REGMAP_IRQ_REG(BD9571MWV_IRQ_BKUP_TRG, 0,
+ BD9571MWV_INT_INTREQ_BKUP_TRG_INT),
+};
+
+static struct regmap_irq_chip bd9571mwv_irq_chip = {
+ .name = "bd9571mwv",
+ .status_base = BD9571MWV_INT_INTREQ,
+ .mask_base = BD9571MWV_INT_INTMASK,
+ .ack_base = BD9571MWV_INT_INTREQ,
+ .init_ack_masked = true,
+ .num_regs = 1,
+ .irqs = bd9571mwv_irqs,
+ .num_irqs = ARRAY_SIZE(bd9571mwv_irqs),
+};
+
+static int bd9571mwv_identify(struct bd9571mwv *bd)
+{
+ struct device *dev = bd->dev;
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(bd->regmap, BD9571MWV_VENDOR_CODE, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read vendor code register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ if (value != BD9571MWV_VENDOR_CODE_VAL) {
+ dev_err(dev, "Invalid vendor code ID %02x (expected %02x)\n",
+ value, BD9571MWV_VENDOR_CODE_VAL);
+ return -EINVAL;
+ }
+
+ ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_CODE, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read product code register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ if (value != BD9571MWV_PRODUCT_CODE_VAL) {
+ dev_err(dev, "Invalid product code ID %02x (expected %02x)\n",
+ value, BD9571MWV_PRODUCT_CODE_VAL);
+ return -EINVAL;
+ }
+
+ ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_REVISION, &value);
+ if (ret) {
+ dev_err(dev, "Failed to read revision register (ret=%i)\n",
+ ret);
+ return ret;
+ }
+
+ dev_info(dev, "Device: BD9571MWV rev. %d\n", value & 0xff);
+
+ return 0;
+}
+
+static int bd9571mwv_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct bd9571mwv *bd;
+ int ret;
+
+ bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, bd);
+ bd->dev = &client->dev;
+ bd->irq = client->irq;
+
+ bd->regmap = devm_regmap_init_i2c(client, &bd9571mwv_regmap_config);
+ if (IS_ERR(bd->regmap)) {
+ dev_err(bd->dev, "Failed to initialize register map\n");
+ return PTR_ERR(bd->regmap);
+ }
+
+ ret = bd9571mwv_identify(bd);
+ if (ret)
+ return ret;
+
+ ret = regmap_add_irq_chip(bd->regmap, bd->irq, IRQF_ONESHOT, 0,
+ &bd9571mwv_irq_chip, &bd->irq_data);
+ if (ret) {
+ dev_err(bd->dev, "Failed to register IRQ chip\n");
+ return ret;
+ }
+
+ ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO, bd9571mwv_cells,
+ ARRAY_SIZE(bd9571mwv_cells), NULL, 0,
+ regmap_irq_get_domain(bd->irq_data));
+ if (ret) {
+ regmap_del_irq_chip(bd->irq, bd->irq_data);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bd9571mwv_remove(struct i2c_client *client)
+{
+ struct bd9571mwv *bd = i2c_get_clientdata(client);
+
+ regmap_del_irq_chip(bd->irq, bd->irq_data);
+
+ return 0;
+}
+
+static const struct of_device_id bd9571mwv_of_match_table[] = {
+ { .compatible = "rohm,bd9571mwv", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
+
+static const struct i2c_device_id bd9571mwv_id_table[] = {
+ { "bd9571mwv", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table);
+
+static struct i2c_driver bd9571mwv_driver = {
+ .driver = {
+ .name = "bd9571mwv",
+ .of_match_table = bd9571mwv_of_match_table,
+ },
+ .probe = bd9571mwv_probe,
+ .remove = bd9571mwv_remove,
+ .id_table = bd9571mwv_id_table,
+};
+module_i2c_driver(bd9571mwv_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV PMIC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index a23a3a1c7061..433add43a0a9 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -387,6 +387,8 @@ int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel)
mutex_lock(&da9052->auxadc_lock);
+ reinit_completion(&da9052->done);
+
/* Channel gets activated on enabling the Conversion bit */
mux_sel = chan_mux[channel] | DA9052_ADC_MAN_MAN_CONV;
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index b9ea1b27db64..abfb11818fdc 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -67,7 +67,7 @@ static int da9052_spi_remove(struct spi_device *spi)
return 0;
}
-static struct spi_device_id da9052_spi_id[] = {
+static const struct spi_device_id da9052_spi_id[] = {
{"da9052", DA9052},
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
diff --git a/drivers/mfd/da9055-i2c.c b/drivers/mfd/da9055-i2c.c
index b53e100f577c..8169a5c2fa20 100644
--- a/drivers/mfd/da9055-i2c.c
+++ b/drivers/mfd/da9055-i2c.c
@@ -62,7 +62,7 @@ static int da9055_i2c_remove(struct i2c_client *i2c)
* purposes separate). As a result there are specific DA9055 ids for PMIC
* and CODEC, which must be different to operate together.
*/
-static struct i2c_device_id da9055_i2c_id[] = {
+static const struct i2c_device_id da9055_i2c_id[] = {
{"da9055-pmic", 0},
{ }
};
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 86eca614507b..2a2756709f22 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -18,7 +18,7 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/i2c.h>
-#include <linux/i2c/dm355evm_msp.h>
+#include <linux/mfd/dm355evm_msp.h>
/*
diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c
index 3fd703fe3aba..6fb7ba272e09 100644
--- a/drivers/mfd/hi6421-pmic-core.c
+++ b/drivers/mfd/hi6421-pmic-core.c
@@ -1,40 +1,35 @@
/*
- * Device driver for Hi6421 IC
+ * Device driver for Hi6421 PMIC
*
* Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
* http://www.hisilicon.com
- * Copyright (c) <2013-2014> Linaro Ltd.
+ * Copyright (c) <2013-2017> Linaro Ltd.
* http://www.linaro.org
*
* Author: Guodong Xu <guodong.xu@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-pmic.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/mfd/hi6421-pmic.h>
static const struct mfd_cell hi6421_devs[] = {
{ .name = "hi6421-regulator", },
};
+static const struct mfd_cell hi6421v530_devs[] = {
+ { .name = "hi6421v530-regulator", },
+};
+
static const struct regmap_config hi6421_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -42,12 +37,33 @@ static const struct regmap_config hi6421_regmap_config = {
.max_register = HI6421_REG_TO_BUS_ADDR(HI6421_REG_MAX),
};
+static const struct of_device_id of_hi6421_pmic_match[] = {
+ {
+ .compatible = "hisilicon,hi6421-pmic",
+ .data = (void *)HI6421
+ },
+ {
+ .compatible = "hisilicon,hi6421v530-pmic",
+ .data = (void *)HI6421_V530
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);
+
static int hi6421_pmic_probe(struct platform_device *pdev)
{
struct hi6421_pmic *pmic;
struct resource *res;
+ const struct of_device_id *id;
+ const struct mfd_cell *subdevs;
+ enum hi6421_type type;
void __iomem *base;
- int ret;
+ int n_subdevs, ret;
+
+ id = of_match_device(of_hi6421_pmic_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+ type = (enum hi6421_type)id->data;
pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
@@ -61,41 +77,50 @@ static int hi6421_pmic_probe(struct platform_device *pdev)
pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
&hi6421_regmap_config);
if (IS_ERR(pmic->regmap)) {
- dev_err(&pdev->dev,
- "regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
+ dev_err(&pdev->dev, "Failed to initialise Regmap: %ld\n",
+ PTR_ERR(pmic->regmap));
return PTR_ERR(pmic->regmap);
}
- /* set over-current protection debounce 8ms */
- regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
+ platform_set_drvdata(pdev, pmic);
+
+ switch (type) {
+ case HI6421:
+ /* set over-current protection debounce 8ms */
+ regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
(HI6421_OCP_DEB_SEL_MASK
| HI6421_OCP_EN_DEBOUNCE_MASK
| HI6421_OCP_AUTO_STOP_MASK),
(HI6421_OCP_DEB_SEL_8MS
| HI6421_OCP_EN_DEBOUNCE_ENABLE));
- platform_set_drvdata(pdev, pmic);
+ subdevs = hi6421_devs;
+ n_subdevs = ARRAY_SIZE(hi6421_devs);
+ break;
+ case HI6421_V530:
+ subdevs = hi6421v530_devs;
+ n_subdevs = ARRAY_SIZE(hi6421v530_devs);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown device type %d\n",
+ (unsigned int)type);
+ return -EINVAL;
+ }
- ret = devm_mfd_add_devices(&pdev->dev, 0, hi6421_devs,
- ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
+ ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ subdevs, n_subdevs, NULL, 0, NULL);
if (ret) {
- dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
+ dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
return ret;
}
return 0;
}
-static const struct of_device_id of_hi6421_pmic_match_tbl[] = {
- { .compatible = "hisilicon,hi6421-pmic", },
- { },
-};
-MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match_tbl);
-
static struct platform_driver hi6421_pmic_driver = {
.driver = {
- .name = "hi6421_pmic",
- .of_match_table = of_hi6421_pmic_match_tbl,
+ .name = "hi6421_pmic",
+ .of_match_table = of_hi6421_pmic_match,
},
.probe = hi6421_pmic_probe,
};
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index ad388bb056cd..d1c46de89eb4 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -221,6 +221,7 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0xa12a), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa160), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa161), (kernel_ulong_t)&spt_i2c_info },
+ { PCI_VDEVICE(INTEL, 0xa162), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa166), (kernel_ulong_t)&spt_uart_info },
/* KBL-H */
{ PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&spt_uart_info },
diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 70c646b0097d..0e0ab9bb1530 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -502,6 +502,14 @@ int intel_lpss_suspend(struct device *dev)
for (i = 0; i < LPSS_PRIV_REG_COUNT; i++)
lpss->priv_ctx[i] = readl(lpss->priv + i * 4);
+ /*
+ * If the device type is not UART, then put the controller into
+ * reset. UART cannot be put into reset since S3/S0ix fail when
+ * no_console_suspend flag is enabled.
+ */
+ if (lpss->type != LPSS_DEV_UART)
+ writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
return 0;
}
EXPORT_SYMBOL_GPL(intel_lpss_suspend);
diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
index 13737be6df35..36adf9e8153e 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -16,6 +16,7 @@
* Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/i2c.h>
@@ -28,6 +29,10 @@
#include <linux/pwm.h>
#include "intel_soc_pmic_core.h"
+/* Crystal Cove PMIC shares same ACPI ID between different platforms */
+#define BYT_CRC_HRV 2
+#define CHT_CRC_HRV 3
+
/* Lookup table for the Panel Enable/Disable line as GPIO signals */
static struct gpiod_lookup_table panel_gpio_table = {
/* Intel GFX is consumer */
@@ -48,16 +53,33 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *i2c_id)
{
struct device *dev = &i2c->dev;
- const struct acpi_device_id *id;
struct intel_soc_pmic_config *config;
struct intel_soc_pmic *pmic;
+ unsigned long long hrv;
+ acpi_status status;
int ret;
- id = acpi_match_device(dev->driver->acpi_match_table, dev);
- if (!id || !id->driver_data)
+ /*
+ * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
+ * Trail version, use _HRV to differentiate between the 2.
+ */
+ status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Failed to get PMIC hardware revision\n");
return -ENODEV;
-
- config = (struct intel_soc_pmic_config *)id->driver_data;
+ }
+
+ switch (hrv) {
+ case BYT_CRC_HRV:
+ config = &intel_soc_pmic_config_byt_crc;
+ break;
+ case CHT_CRC_HRV:
+ config = &intel_soc_pmic_config_cht_crc;
+ break;
+ default:
+ dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
+ config = &intel_soc_pmic_config_byt_crc;
+ }
pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
@@ -157,7 +179,7 @@ MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id);
#if defined(CONFIG_ACPI)
static const struct acpi_device_id intel_soc_pmic_acpi_match[] = {
- {"INT33FD", (kernel_ulong_t)&intel_soc_pmic_config_crc},
+ { "INT33FD" },
{ },
};
MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match);
diff --git a/drivers/mfd/intel_soc_pmic_core.h b/drivers/mfd/intel_soc_pmic_core.h
index ff2464bc172f..90a1416d4dac 100644
--- a/drivers/mfd/intel_soc_pmic_core.h
+++ b/drivers/mfd/intel_soc_pmic_core.h
@@ -27,6 +27,7 @@ struct intel_soc_pmic_config {
const struct regmap_irq_chip *irq_chip;
};
-extern struct intel_soc_pmic_config intel_soc_pmic_config_crc;
+extern struct intel_soc_pmic_config intel_soc_pmic_config_byt_crc;
+extern struct intel_soc_pmic_config intel_soc_pmic_config_cht_crc;
#endif /* __INTEL_SOC_PMIC_CORE_H__ */
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
index 4a7494872da2..6d19a6d0fb97 100644
--- a/drivers/mfd/intel_soc_pmic_crc.c
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -80,7 +80,7 @@ static struct resource bcu_resources[] = {
},
};
-static struct mfd_cell crystal_cove_dev[] = {
+static struct mfd_cell crystal_cove_byt_dev[] = {
{
.name = "crystal_cove_pwrsrc",
.num_resources = ARRAY_SIZE(pwrsrc_resources),
@@ -114,6 +114,17 @@ static struct mfd_cell crystal_cove_dev[] = {
},
};
+static struct mfd_cell crystal_cove_cht_dev[] = {
+ {
+ .name = "crystal_cove_gpio",
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resources = gpio_resources,
+ },
+ {
+ .name = "crystal_cove_pwm",
+ },
+};
+
static const struct regmap_config crystal_cove_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -155,10 +166,18 @@ static const struct regmap_irq_chip crystal_cove_irq_chip = {
.mask_base = CRYSTAL_COVE_REG_MIRQLVL1,
};
-struct intel_soc_pmic_config intel_soc_pmic_config_crc = {
+struct intel_soc_pmic_config intel_soc_pmic_config_byt_crc = {
+ .irq_flags = IRQF_TRIGGER_RISING,
+ .cell_dev = crystal_cove_byt_dev,
+ .n_cell_devs = ARRAY_SIZE(crystal_cove_byt_dev),
+ .regmap_config = &crystal_cove_regmap_config,
+ .irq_chip = &crystal_cove_irq_chip,
+};
+
+struct intel_soc_pmic_config intel_soc_pmic_config_cht_crc = {
.irq_flags = IRQF_TRIGGER_RISING,
- .cell_dev = crystal_cove_dev,
- .n_cell_devs = ARRAY_SIZE(crystal_cove_dev),
+ .cell_dev = crystal_cove_cht_dev,
+ .n_cell_devs = ARRAY_SIZE(crystal_cove_cht_dev),
.regmap_config = &crystal_cove_regmap_config,
.irq_chip = &crystal_cove_irq_chip,
};
diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c
index 340ad0c63744..32d2a07d4354 100644
--- a/drivers/mfd/lp87565.c
+++ b/drivers/mfd/lp87565.c
@@ -73,10 +73,9 @@ static int lp87565_probe(struct i2c_client *client,
i2c_set_clientdata(client, lp87565);
- ret = mfd_add_devices(lp87565->dev, PLATFORM_DEVID_AUTO, lp87565_cells,
- ARRAY_SIZE(lp87565_cells), NULL, 0, NULL);
-
- return ret;
+ return devm_mfd_add_devices(lp87565->dev, PLATFORM_DEVID_AUTO,
+ lp87565_cells, ARRAY_SIZE(lp87565_cells),
+ NULL, 0, NULL);
}
static const struct i2c_device_id lp87565_id_table[] = {
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 773f1554d2f9..450ae36645aa 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -1119,17 +1119,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
res->start = spi_base + SPIBASE_LPT;
res->end = res->start + SPIBASE_LPT_SZ - 1;
- /*
- * Try to make the flash chip writeable now by
- * setting BCR_WPD. It it fails we tell the driver
- * that it can only read the chip.
- */
pci_read_config_dword(dev, BCR, &bcr);
- if (!(bcr & BCR_WPD)) {
- bcr |= BCR_WPD;
- pci_write_config_dword(dev, BCR, bcr);
- pci_read_config_dword(dev, BCR, &bcr);
- }
info->writeable = !!(bcr & BCR_WPD);
}
break;
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index 5c80aea3211f..10063236132c 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -151,7 +151,7 @@ static int max8925_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max8925_platform_data *pdata = dev_get_platdata(&client->dev);
- static struct max8925_chip *chip;
+ struct max8925_chip *chip;
struct device_node *node = client->dev.of_node;
if (node && !pdata) {
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 4c33b8063bc3..b1d3f70782d9 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -192,10 +192,8 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) {
pdata = max8998_i2c_parse_dt_pdata(&i2c->dev);
- if (IS_ERR(pdata)) {
- ret = PTR_ERR(pdata);
- goto err;
- }
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
}
i2c_set_clientdata(i2c, max8998);
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 6f5300b0eb31..44a5d66314c6 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -131,12 +131,12 @@ static inline u32 usbtll_read(void __iomem *base, u32 reg)
return readl_relaxed(base + reg);
}
-static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
+static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
{
writeb_relaxed(val, base + reg);
}
-static inline u8 usbtll_readb(void __iomem *base, u8 reg)
+static inline u8 usbtll_readb(void __iomem *base, u32 reg)
{
return readb_relaxed(base + reg);
}
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index d4c114abeb75..e7d27b7861c1 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -302,15 +302,23 @@ static int retu_remove(struct i2c_client *i2c)
}
static const struct i2c_device_id retu_id[] = {
- { "retu-mfd", 0 },
- { "tahvo-mfd", 0 },
+ { "retu", 0 },
+ { "tahvo", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, retu_id);
+static const struct of_device_id retu_of_match[] = {
+ { .compatible = "nokia,retu" },
+ { .compatible = "nokia,tahvo" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, retu_of_match);
+
static struct i2c_driver retu_driver = {
.driver = {
.name = "retu-mfd",
+ .of_match_table = retu_of_match,
},
.probe = retu_probe,
.remove = retu_remove,
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index fd087cbb0bde..216fbf6adec9 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -70,6 +70,14 @@ static const struct regmap_config rk818_regmap_config = {
.volatile_reg = rk808_is_volatile_reg,
};
+static const struct regmap_config rk805_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK805_OFF_SOURCE_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -86,6 +94,34 @@ static struct resource rtc_resources[] = {
}
};
+static struct resource rk805_key_resources[] = {
+ {
+ .start = RK805_IRQ_PWRON_FALL,
+ .end = RK805_IRQ_PWRON_FALL,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = RK805_IRQ_PWRON_RISE,
+ .end = RK805_IRQ_PWRON_RISE,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static const struct mfd_cell rk805s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ { .name = "rk805-pinctrl", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+ { .name = "rk805-pwrkey",
+ .num_resources = ARRAY_SIZE(rk805_key_resources),
+ .resources = &rk805_key_resources[0],
+ },
+};
+
static const struct mfd_cell rk808s[] = {
{ .name = "rk808-clkout", },
{ .name = "rk808-regulator", },
@@ -106,6 +142,20 @@ static const struct mfd_cell rk818s[] = {
},
};
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+ {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+ RK805_BUCK1_2_ILMAX_4000MA},
+ {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+ RK805_BUCK1_2_ILMAX_4000MA},
+ {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+ RK805_BUCK3_ILMAX_3000MA},
+ {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+ RK805_BUCK4_ILMAX_3500MA},
+ {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+ {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+ {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
static const struct rk808_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
@@ -135,6 +185,41 @@ static const struct rk808_reg_data rk818_pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct regmap_irq rk805_irqs[] = {
+ [RK805_IRQ_PWRON_RISE] = {
+ .mask = RK805_IRQ_PWRON_RISE_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_VB_LOW] = {
+ .mask = RK805_IRQ_VB_LOW_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON] = {
+ .mask = RK805_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON_LP] = {
+ .mask = RK805_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_HOTDIE] = {
+ .mask = RK805_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_RTC_ALARM] = {
+ .mask = RK805_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_RTC_PERIOD] = {
+ .mask = RK805_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK805_IRQ_PWRON_FALL] = {
+ .mask = RK805_IRQ_PWRON_FALL_MSK,
+ .reg_offset = 0,
+ },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +332,17 @@ static const struct regmap_irq rk818_irqs[] = {
},
};
+static struct regmap_irq_chip rk805_irq_chip = {
+ .name = "rk805",
+ .irqs = rk805_irqs,
+ .num_irqs = ARRAY_SIZE(rk805_irqs),
+ .num_regs = 1,
+ .status_base = RK805_INT_STS_REG,
+ .mask_base = RK805_INT_STS_MSK_REG,
+ .ack_base = RK805_INT_STS_REG,
+ .init_ack_masked = true,
+};
+
static const struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -272,6 +368,25 @@ static const struct regmap_irq_chip rk818_irq_chip = {
};
static struct i2c_client *rk808_i2c_client;
+
+static void rk805_device_shutdown(void)
+{
+ int ret;
+ struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+ if (!rk808) {
+ dev_warn(&rk808_i2c_client->dev,
+ "have no rk805, so do nothing here\n");
+ return;
+ }
+
+ ret = regmap_update_bits(rk808->regmap,
+ RK805_DEV_CTRL_REG,
+ DEV_OFF, DEV_OFF);
+ if (ret)
+ dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
static void rk808_device_shutdown(void)
{
int ret;
@@ -309,6 +424,7 @@ static void rk818_device_shutdown(void)
}
static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk805" },
{ .compatible = "rockchip,rk808" },
{ .compatible = "rockchip,rk818" },
{ },
@@ -325,7 +441,7 @@ static int rk808_probe(struct i2c_client *client,
void (*pm_pwroff_fn)(void);
int nr_pre_init_regs;
int nr_cells;
- int pm_off = 0;
+ int pm_off = 0, msb, lsb;
int ret;
int i;
@@ -333,16 +449,34 @@ static int rk808_probe(struct i2c_client *client,
if (!rk808)
return -ENOMEM;
- rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
- if (rk808->variant < 0) {
- dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+ /* Read chip variant */
+ msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
+ if (msb < 0) {
+ dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
RK808_ID_MSB);
- return rk808->variant;
+ return msb;
+ }
+
+ lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
+ if (lsb < 0) {
+ dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+ RK808_ID_LSB);
+ return lsb;
}
- dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+ rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+ dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
switch (rk808->variant) {
+ case RK805_ID:
+ rk808->regmap_cfg = &rk805_regmap_config;
+ rk808->regmap_irq_chip = &rk805_irq_chip;
+ pre_init_reg = rk805_pre_init_reg;
+ nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+ cells = rk805s;
+ nr_cells = ARRAY_SIZE(rk805s);
+ pm_pwroff_fn = rk805_device_shutdown;
+ break;
case RK808_ID:
rk808->regmap_cfg = &rk808_regmap_config;
rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -435,6 +569,7 @@ static int rk808_remove(struct i2c_client *client)
}
static const struct i2c_device_id rk808_ids[] = {
+ { "rk805" },
{ "rk808" },
{ "rk818" },
{ },
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index a0ac89dfdf0f..3cf69e5c5703 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -644,7 +644,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
{
int err, clk;
u8 n, clk_divider, mcu_cnt, div;
- u8 depth[] = {
+ static const u8 depth[] = {
[RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M,
[RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M,
[RTSX_SSC_DEPTH_1M] = SSC_DEPTH_1M,
@@ -768,7 +768,7 @@ EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
int rtsx_pci_card_exclusive_check(struct rtsx_pcr *pcr, int card)
{
- unsigned int cd_mask[] = {
+ static const unsigned int cd_mask[] = {
[RTSX_SD_CARD] = SD_EXIST,
[RTSX_MS_CARD] = MS_EXIST
};
diff --git a/drivers/mfd/stm32-lptimer.c b/drivers/mfd/stm32-lptimer.c
new file mode 100644
index 000000000000..075330a25f61
--- /dev/null
+++ b/drivers/mfd/stm32-lptimer.c
@@ -0,0 +1,107 @@
+/*
+ * STM32 Low-Power Timer parent driver.
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
+ *
+ * Inspired by Benjamin Gaignard's stm32-timers driver
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define STM32_LPTIM_MAX_REGISTER 0x3fc
+
+static const struct regmap_config stm32_lptimer_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = sizeof(u32),
+ .max_register = STM32_LPTIM_MAX_REGISTER,
+};
+
+static int stm32_lptimer_detect_encoder(struct stm32_lptimer *ddata)
+{
+ u32 val;
+ int ret;
+
+ /*
+ * Quadrature encoder mode bit can only be written and read back when
+ * Low-Power Timer supports it.
+ */
+ ret = regmap_update_bits(ddata->regmap, STM32_LPTIM_CFGR,
+ STM32_LPTIM_ENC, STM32_LPTIM_ENC);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(ddata->regmap, STM32_LPTIM_CFGR, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(ddata->regmap, STM32_LPTIM_CFGR,
+ STM32_LPTIM_ENC, 0);
+ if (ret)
+ return ret;
+
+ ddata->has_encoder = !!(val & STM32_LPTIM_ENC);
+
+ return 0;
+}
+
+static int stm32_lptimer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stm32_lptimer *ddata;
+ struct resource *res;
+ void __iomem *mmio;
+ int ret;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mmio))
+ return PTR_ERR(mmio);
+
+ ddata->regmap = devm_regmap_init_mmio_clk(dev, "mux", mmio,
+ &stm32_lptimer_regmap_cfg);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
+
+ ddata->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ddata->clk))
+ return PTR_ERR(ddata->clk);
+
+ ret = stm32_lptimer_detect_encoder(ddata);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, ddata);
+
+ return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id stm32_lptimer_of_match[] = {
+ { .compatible = "st,stm32-lptimer", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32_lptimer_of_match);
+
+static struct platform_driver stm32_lptimer_driver = {
+ .probe = stm32_lptimer_probe,
+ .driver = {
+ .name = "stm32-lptimer",
+ .of_match_table = stm32_lptimer_of_match,
+ },
+};
+module_platform_driver(stm32_lptimer_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Low-Power Timer");
+MODULE_ALIAS("platform:stm32-lptimer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 22c811396edc..43d8683266de 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -86,8 +86,11 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc)
struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
unsigned long flags;
u8 dev_ctl;
+ int ret;
- clk_prepare_enable(t7l66xb->clk32k);
+ ret = clk_prepare_enable(t7l66xb->clk32k);
+ if (ret)
+ return ret;
raw_spin_lock_irqsave(&t7l66xb->lock, flags);
@@ -286,8 +289,12 @@ static int t7l66xb_resume(struct platform_device *dev)
{
struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev);
+ int ret;
+
+ ret = clk_prepare_enable(t7l66xb->clk48m);
+ if (ret)
+ return ret;
- clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->resume)
pdata->resume(dev);
@@ -361,7 +368,9 @@ static int t7l66xb_probe(struct platform_device *dev)
goto err_ioremap;
}
- clk_prepare_enable(t7l66xb->clk48m);
+ ret = clk_prepare_enable(t7l66xb->clk48m);
+ if (ret)
+ goto err_clk_enable;
if (pdata->enable)
pdata->enable(dev);
@@ -386,6 +395,8 @@ static int t7l66xb_probe(struct platform_device *dev)
return 0;
t7l66xb_detach_irq(dev);
+ clk_disable_unprepare(t7l66xb->clk48m);
+err_clk_enable:
iounmap(t7l66xb->scr);
err_ioremap:
release_resource(&t7l66xb->rscr);
diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c
index baa12ea666fb..187848c93779 100644
--- a/drivers/mfd/tps6105x.c
+++ b/drivers/mfd/tps6105x.c
@@ -173,9 +173,17 @@ static const struct i2c_device_id tps6105x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, tps6105x_id);
+static const struct of_device_id tps6105x_of_match[] = {
+ { .compatible = "ti,tps61050" },
+ { .compatible = "ti,tps61052" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tps6105x_of_match);
+
static struct i2c_driver tps6105x_driver = {
.driver = {
.name = "tps6105x",
+ .of_match_table = tps6105x_of_match,
},
.probe = tps6105x_probe,
.remove = tps6105x_remove,
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index d829a6131f09..2ab67386b4ef 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -32,7 +32,7 @@
#include <linux/mutex.h>
#include <linux/platform_device.h>
-#include <linux/i2c/tps65010.h>
+#include <linux/mfd/tps65010.h>
#include <linux/gpio/driver.h>
diff --git a/drivers/mfd/tps68470.c b/drivers/mfd/tps68470.c
new file mode 100644
index 000000000000..189efaea054c
--- /dev/null
+++ b/drivers/mfd/tps68470.c
@@ -0,0 +1,106 @@
+/*
+ * TPS68470 chip Parent driver
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Authors:
+ * Rajmohan Mani <rajmohan.mani@intel.com>
+ * Tianshu Qiu <tian.shu.qiu@intel.com>
+ * Jian Xu Zheng <jian.xu.zheng@intel.com>
+ * Yuning Pu <yuning.pu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell tps68470s[] = {
+ { .name = "tps68470-gpio" },
+ { .name = "tps68470_pmic_opregion" },
+};
+
+static const struct regmap_config tps68470_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = TPS68470_REG_MAX,
+};
+
+static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
+{
+ unsigned int version;
+ int ret;
+
+ /* Force software reset */
+ ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, TPS68470_REG_REVID, &version);
+ if (ret) {
+ dev_err(dev, "Failed to read revision register: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(dev, "TPS68470 REVID: 0x%x\n", version);
+
+ return 0;
+}
+
+static int tps68470_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "devm_regmap_init_i2c Error %ld\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ i2c_set_clientdata(client, regmap);
+
+ ret = tps68470_chip_init(dev, regmap);
+ if (ret < 0) {
+ dev_err(dev, "TPS68470 Init Error %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, tps68470s,
+ ARRAY_SIZE(tps68470s), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(dev, "devm_mfd_add_devices failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct acpi_device_id tps68470_acpi_ids[] = {
+ {"INT3472"},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, tps68470_acpi_ids);
+
+static struct i2c_driver tps68470_driver = {
+ .driver = {
+ .name = "tps68470",
+ .acpi_match_table = tps68470_acpi_ids,
+ },
+ .probe_new = tps68470_probe,
+};
+builtin_i2c_driver(tps68470_driver);
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index c64615dca2bd..d3133a371e27 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -44,7 +44,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
+#include <linux/mfd/twl.h>
/* Register descriptions for audio */
#include <linux/mfd/twl4030-audio.h>
@@ -173,7 +173,7 @@ static struct twl_private *twl_priv;
static struct twl_mapping twl4030_map[] = {
/*
* NOTE: don't change this table without updating the
- * <linux/i2c/twl.h> defines for TWL4030_MODULE_*
+ * <linux/mfd/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
@@ -344,7 +344,7 @@ static const struct regmap_config twl4030_regmap_config[4] = {
static struct twl_mapping twl6030_map[] = {
/*
* NOTE: don't change this table without updating the
- * <linux/i2c/twl.h> defines for TWL4030_MODULE_*
+ * <linux/mfd/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
@@ -448,7 +448,7 @@ static struct regmap *twl_get_regmap(u8 mod_no)
* @reg: register address (just offset will do)
* @num_bytes: number of bytes to transfer
*
- * Returns the result of operation - 0 is success
+ * Returns 0 on success or else a negative error code.
*/
int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
@@ -476,7 +476,7 @@ EXPORT_SYMBOL(twl_i2c_write);
* @reg: register address (just offset will do)
* @num_bytes: number of bytes to transfer
*
- * Returns result of operation - num_bytes is success else failure.
+ * Returns 0 on success or else a negative error code.
*/
int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index 0a1606480023..da16bf45fab4 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -30,7 +30,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/i2c/twl.h>
+#include <linux/mfd/twl.h>
#include <linux/mfd/core.h>
#include <linux/mfd/twl4030-audio.h>
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 378c02d43bf7..b16c16f194fd 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -33,7 +33,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
+#include <linux/mfd/twl.h>
#include "twl-core.h"
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index f4b2c29d77e3..6b36932263ba 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -25,7 +25,7 @@
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/i2c/twl.h>
+#include <linux/mfd/twl.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index 53574508a613..e3ec8dfa9f1e 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -35,7 +35,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kthread.h>
-#include <linux/i2c/twl.h>
+#include <linux/mfd/twl.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
#include <linux/of.h>