diff options
Diffstat (limited to 'drivers/mfd')
28 files changed, 1021 insertions, 261 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1bc97c2761e4..eea61e349e26 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -18,6 +18,17 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ACT8945A + tristate "Active-semi ACT8945A" + select MFD_CORE + select REGMAP_I2C + depends on I2C && OF + help + Support for the ACT8945A PMIC from Active-semi. This device + features three step-down DC/DC converters and four low-dropout + linear regulators, along with a complete ActivePath battery + charger. + config MFD_AS3711 bool "AMS AS3711" select MFD_CORE @@ -91,14 +102,29 @@ config MFD_BCM590XX Support for the BCM590xx PMUs from Broadcom config MFD_AXP20X - bool "X-Powers AXP20X" + tristate select MFD_CORE - select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + +config MFD_AXP20X_I2C + tristate "X-Powers AXP series PMICs with I2C" + select MFD_AXP20X + select REGMAP_I2C + depends on I2C + help + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with I2C. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + +config MFD_AXP20X_RSB + tristate "X-Powers AXP series PMICs with RSB" + select MFD_AXP20X + depends on SUNXI_RSB help - If you say Y here you get support for the X-Powers AXP202, AXP209 and - AXP288 power management IC (PMIC). + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with RSB. This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. @@ -203,7 +229,7 @@ config MFD_DA9062 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C help Say yes here for support for the Dialog Semiconductor DA9062 PMIC. This includes the I2C driver and core APIs. @@ -215,7 +241,7 @@ config MFD_DA9063 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C help Say yes here for support for the Dialog Semiconductor DA9063 PMIC. This includes the I2C driver and core APIs. @@ -224,7 +250,7 @@ config MFD_DA9063 config MFD_DA9150 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" - depends on I2C=y + depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -271,6 +297,15 @@ config MFD_MC13XXX_I2C help Select this if your MC13xxx is connected via an I2C bus. +config MFD_MX25_TSADC + tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" + select REGMAP_MMIO + depends on (SOC_IMX25 && OF) || COMPILE_TEST + help + Enable support for the integrated Touchscreen and ADC unit of the + i.MX25 processors. They consist of a conversion queue for general + purpose ADC and a queue for Touchscreens. + config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF @@ -445,7 +480,7 @@ config MFD_KEMPLD config MFD_88PM800 tristate "Marvell 88PM800" - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -457,7 +492,7 @@ config MFD_88PM800 config MFD_88PM805 tristate "Marvell 88PM805" - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -493,8 +528,8 @@ config MFD_MAX14577 of the device. config MFD_MAX77686 - bool "Maxim Semiconductor MAX77686/802 PMIC Support" - depends on I2C=y + tristate "Maxim Semiconductor MAX77686/802 PMIC Support" + depends on I2C depends on OF select MFD_CORE select REGMAP_I2C @@ -538,7 +573,7 @@ config MFD_MAX77843 config MFD_MAX8907 tristate "Maxim Semiconductor MAX8907 PMIC Support" select MFD_CORE - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ help @@ -743,7 +778,7 @@ config MFD_RTSX_PCI config MFD_RT5033 tristate "Richtek RT5033 Power Management IC" - depends on I2C=y + depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -1106,6 +1141,19 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65086 + tristate "TI TPS65086 Power Management Integrated Chips (PMICs)" + select REGMAP + select REGMAP_IRQ + select REGMAP_I2C + depends on I2C + help + If you say yes here you get support for the TPS65086 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config TPS65911_COMPARATOR tristate @@ -1370,7 +1418,6 @@ config MFD_ARIZONA config MFD_ARIZONA_I2C tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" select MFD_ARIZONA - select MFD_CORE select REGMAP_I2C depends on I2C help @@ -1380,12 +1427,11 @@ config MFD_ARIZONA_I2C config MFD_ARIZONA_SPI tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" select MFD_ARIZONA - select MFD_CORE select REGMAP_SPI depends on SPI_MASTER help Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform - audio SoC core functionality controlled via I2C. + audio SoC core functionality controlled via SPI. config MFD_CS47L24 bool "Cirrus Logic CS47L24 and WM1831" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1811202cee19..5eaa6465d0a6 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o @@ -70,6 +71,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +obj-$(CONFIG_MFD_TPS65086) += tps65086.o obj-$(CONFIG_MFD_TPS65217) += tps65217.o obj-$(CONFIG_MFD_TPS65218) += tps65218.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o @@ -84,6 +86,8 @@ obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o obj-$(CONFIG_TWL6040_CORE) += twl6040.o +obj-$(CONFIG_MFD_MX25_TSADC) += fsl-imx25-tsadc.o + obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o @@ -110,6 +114,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o obj-$(CONFIG_MFD_AXP20X) += axp20x.o +obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o +obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file mode 100644 index 000000000000..525b546ba42f --- /dev/null +++ b/drivers/mfd/act8945a.c @@ -0,0 +1,102 @@ +/* + * MFD driver for Active-semi ACT8945a PMIC + * + * Copyright (C) 2015 Atmel Corporation. + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +static const struct mfd_cell act8945a_devs[] = { + { + .name = "act8945a-regulator", + }, + { + .name = "act8945a-charger", + }, +}; + +static const struct regmap_config act8945a_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int act8945a_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret; + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + i2c_set_clientdata(i2c, regmap); + + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); + if (ret) { + dev_err(&i2c->dev, "Failed to add sub devices\n"); + return ret; + } + + return 0; +} + +static int act8945a_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id act8945a_i2c_id[] = { + { "act8945a", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); + +static const struct of_device_id act8945a_of_match[] = { + { .compatible = "active-semi,act8945a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, act8945a_of_match); + +static struct i2c_driver act8945a_i2c_driver = { + .driver = { + .name = "act8945a", + .of_match_table = of_match_ptr(act8945a_of_match), + }, + .probe = act8945a_i2c_probe, + .remove = act8945a_i2c_remove, + .id_table = act8945a_i2c_id, +}; + +static int __init act8945a_i2c_init(void) +{ + return i2c_add_driver(&act8945a_i2c_driver); +} +subsys_initcall(act8945a_i2c_init); + +static void __exit act8945a_i2c_exit(void) +{ + i2c_del_driver(&act8945a_i2c_driver); +} +module_exit(act8945a_i2c_exit); + +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c index 94d67a6e1eb7..09e1483b99bc 100644 --- a/drivers/mfd/as3711.c +++ b/drivers/mfd/as3711.c @@ -108,8 +108,8 @@ static const struct regmap_config as3711_regmap_config = { .volatile_reg = as3711_volatile_reg, .readable_reg = as3711_readable_reg, .precious_reg = as3711_precious_reg, - .max_register = AS3711_MAX_REGS, - .num_reg_defaults_raw = AS3711_MAX_REGS, + .max_register = AS3711_MAX_REG, + .num_reg_defaults_raw = AS3711_NUM_REGS, .cache_type = REGCACHE_RBTREE, }; diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c new file mode 100644 index 000000000000..b1b865822c07 --- /dev/null +++ b/drivers/mfd/axp20x-i2c.c @@ -0,0 +1,104 @@ +/* + * I2C driver for the X-Powers' Power Management ICs + * + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. + * + * This driver supports the I2C variants. + * + * Copyright (C) 2014 Carlo Caione + * + * Author: Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mfd/axp20x.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +static int axp20x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct axp20x_dev *axp20x; + int ret; + + axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); + if (!axp20x) + return -ENOMEM; + + axp20x->dev = &i2c->dev; + axp20x->irq = i2c->irq; + dev_set_drvdata(axp20x->dev, axp20x); + + ret = axp20x_match_device(axp20x); + if (ret) + return ret; + + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); + if (IS_ERR(axp20x->regmap)) { + ret = PTR_ERR(axp20x->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + return axp20x_device_probe(axp20x); +} + +static int axp20x_i2c_remove(struct i2c_client *i2c) +{ + struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); + + return axp20x_device_remove(axp20x); +} + +static const struct of_device_id axp20x_i2c_of_match[] = { + { .compatible = "x-powers,axp152", .data = (void *)AXP152_ID }, + { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, + { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, + { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match); + +/* + * This is useless for OF-enabled devices, but it is needed by I2C subsystem + */ +static const struct i2c_device_id axp20x_i2c_id[] = { + { }, +}; +MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); + +static const struct acpi_device_id axp20x_i2c_acpi_match[] = { + { + .id = "INT33F4", + .driver_data = AXP288_ID, + }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match); + +static struct i2c_driver axp20x_i2c_driver = { + .driver = { + .name = "axp20x-i2c", + .of_match_table = of_match_ptr(axp20x_i2c_of_match), + .acpi_match_table = ACPI_PTR(axp20x_i2c_acpi_match), + }, + .probe = axp20x_i2c_probe, + .remove = axp20x_i2c_remove, + .id_table = axp20x_i2c_id, +}; + +module_i2c_driver(axp20x_i2c_driver); + +MODULE_DESCRIPTION("PMIC MFD I2C driver for AXP20X"); +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c new file mode 100644 index 000000000000..28c20247c112 --- /dev/null +++ b/drivers/mfd/axp20x-rsb.c @@ -0,0 +1,80 @@ +/* + * RSB driver for the X-Powers' Power Management ICs + * + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. + * + * This driver supports the RSB variants. + * + * Copyright (C) 2015 Chen-Yu Tsai + * + * Author: Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/err.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/sunxi-rsb.h> + +static int axp20x_rsb_probe(struct sunxi_rsb_device *rdev) +{ + struct axp20x_dev *axp20x; + int ret; + + axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL); + if (!axp20x) + return -ENOMEM; + + axp20x->dev = &rdev->dev; + axp20x->irq = rdev->irq; + dev_set_drvdata(&rdev->dev, axp20x); + + ret = axp20x_match_device(axp20x); + if (ret) + return ret; + + axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg); + if (IS_ERR(axp20x->regmap)) { + ret = PTR_ERR(axp20x->regmap); + dev_err(&rdev->dev, "regmap init failed: %d\n", ret); + return ret; + } + + return axp20x_device_probe(axp20x); +} + +static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev) +{ + struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev); + + return axp20x_device_remove(axp20x); +} + +static const struct of_device_id axp20x_rsb_of_match[] = { + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match); + +static struct sunxi_rsb_driver axp20x_rsb_driver = { + .driver = { + .name = "axp20x-rsb", + .of_match_table = of_match_ptr(axp20x_rsb_of_match), + }, + .probe = axp20x_rsb_probe, + .remove = axp20x_rsb_remove, +}; +module_sunxi_rsb_driver(axp20x_rsb_driver); + +MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X"); +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 9842199e2e6c..a57d6e940610 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -1,10 +1,14 @@ /* - * axp20x.c - MFD core driver for the X-Powers' Power Management ICs + * MFD core driver for the X-Powers' Power Management ICs * * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature * as well as configurable GPIOs. * + * This file contains the interface independent core functions. + * + * Copyright (C) 2014 Carlo Caione + * * Author: Carlo Caione <carlo@caione.org> * * This program is free software; you can redistribute it and/or modify @@ -13,18 +17,15 @@ */ #include <linux/err.h> -#include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> -#include <linux/slab.h> #include <linux/regulator/consumer.h> #include <linux/mfd/axp20x.h> #include <linux/mfd/core.h> #include <linux/of_device.h> -#include <linux/of_irq.h> #include <linux/acpi.h> #define AXP20X_OFF 0x80 @@ -34,6 +35,7 @@ static const char * const axp20x_model_names[] = { "AXP202", "AXP209", "AXP221", + "AXP223", "AXP288", }; @@ -376,32 +378,6 @@ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), }; -static const struct of_device_id axp20x_of_match[] = { - { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, - { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, - { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, - { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, - { }, -}; -MODULE_DEVICE_TABLE(of, axp20x_of_match); - -/* - * This is useless for OF-enabled devices, but it is needed by I2C subsystem - */ -static const struct i2c_device_id axp20x_i2c_id[] = { - { }, -}; -MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); - -static const struct acpi_device_id axp20x_acpi_match[] = { - { - .id = "INT33F4", - .driver_data = AXP288_ID, - }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); - static const struct regmap_irq_chip axp152_regmap_irq_chip = { .name = "axp152_irq_chip", .status_base = AXP152_IRQ1_STATE, @@ -606,25 +582,26 @@ static void axp20x_power_off(void) AXP20X_OFF); } -static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) +int axp20x_match_device(struct axp20x_dev *axp20x) { + struct device *dev = axp20x->dev; const struct acpi_device_id *acpi_id; const struct of_device_id *of_id; if (dev->of_node) { - of_id = of_match_device(axp20x_of_match, dev); + of_id = of_match_device(dev->driver->of_match_table, dev); if (!of_id) { dev_err(dev, "Unable to match OF ID\n"); return -ENODEV; } - axp20x->variant = (long) of_id->data; + axp20x->variant = (long)of_id->data; } else { acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); if (!acpi_id || !acpi_id->driver_data) { dev_err(dev, "Unable to match ACPI ID and data\n"); return -ENODEV; } - axp20x->variant = (long) acpi_id->driver_data; + axp20x->variant = (long)acpi_id->driver_data; } switch (axp20x->variant) { @@ -642,6 +619,7 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; break; case AXP221_ID: + case AXP223_ID: axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); axp20x->cells = axp22x_cells; axp20x->regmap_cfg = &axp22x_regmap_config; @@ -658,51 +636,31 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) return -EINVAL; } dev_info(dev, "AXP20x variant %s found\n", - axp20x_model_names[axp20x->variant]); + axp20x_model_names[axp20x->variant]); return 0; } +EXPORT_SYMBOL(axp20x_match_device); -static int axp20x_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +int axp20x_device_probe(struct axp20x_dev *axp20x) { - struct axp20x_dev *axp20x; int ret; - axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); - if (!axp20x) - return -ENOMEM; - - ret = axp20x_match_device(axp20x, &i2c->dev); - if (ret) - return ret; - - axp20x->i2c_client = i2c; - axp20x->dev = &i2c->dev; - dev_set_drvdata(axp20x->dev, axp20x); - - axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); - if (IS_ERR(axp20x->regmap)) { - ret = PTR_ERR(axp20x->regmap); - dev_err(&i2c->dev, "regmap init failed: %d\n", ret); - return ret; - } - - ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, + ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq, IRQF_ONESHOT | IRQF_SHARED, -1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { - dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); + dev_err(axp20x->dev, "failed to add irq chip: %d\n", ret); return ret; } ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, - axp20x->nr_cells, NULL, 0, NULL); + axp20x->nr_cells, NULL, 0, NULL); if (ret) { - dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); - regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc); + dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret); + regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); return ret; } @@ -711,38 +669,25 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, pm_power_off = axp20x_power_off; } - dev_info(&i2c->dev, "AXP20X driver loaded\n"); + dev_info(axp20x->dev, "AXP20X driver loaded\n"); return 0; } +EXPORT_SYMBOL(axp20x_device_probe); -static int axp20x_i2c_remove(struct i2c_client *i2c) +int axp20x_device_remove(struct axp20x_dev *axp20x) { - struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); - if (axp20x == axp20x_pm_power_off) { axp20x_pm_power_off = NULL; pm_power_off = NULL; } mfd_remove_devices(axp20x->dev); - regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc); + regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); return 0; } - -static struct i2c_driver axp20x_i2c_driver = { - .driver = { - .name = "axp20x", - .of_match_table = of_match_ptr(axp20x_of_match), - .acpi_match_table = ACPI_PTR(axp20x_acpi_match), - }, - .probe = axp20x_i2c_probe, - .remove = axp20x_i2c_remove, - .id_table = axp20x_i2c_id, -}; - -module_i2c_driver(axp20x_i2c_driver); +EXPORT_SYMBOL(axp20x_device_remove); MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X"); MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); diff --git a/drivers/mfd/cs47l24-tables.c b/drivers/mfd/cs47l24-tables.c index 870800657594..f6b78aafdb55 100644 --- a/drivers/mfd/cs47l24-tables.c +++ b/drivers/mfd/cs47l24-tables.c @@ -227,8 +227,6 @@ static const struct reg_default cs47l24_reg_default[] = { { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ { 0x00000175, 0x0006 }, /* R373 - FLL1 Control 5 */ { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ - { 0x00000177, 0x0281 }, /* R375 - FLL1 Loop Filter Test 1 */ - { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */ { 0x00000179, 0x0000 }, /* R376 - FLL1 Control 7 */ { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ @@ -245,8 +243,6 @@ static const struct reg_default cs47l24_reg_default[] = { { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */ { 0x00000195, 0x000C }, /* R405 - FLL2 Control 5 */ { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ - { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ - { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */ { 0x00000199, 0x0000 }, /* R408 - FLL2 Control 7 */ { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ @@ -678,7 +674,7 @@ static const struct reg_default cs47l24_reg_default[] = { { 0x00000C0F, 0x0400 }, /* R3087 - IRQ CTRL 1 */ { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */ { 0x00000C20, 0x0002 }, /* R3104 - Misc Pad Ctrl 1 */ - { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */ + { 0x00000C21, 0x0000 }, /* R3105 - Misc Pad Ctrl 2 */ { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */ { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ @@ -858,8 +854,6 @@ static bool cs47l24_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL1_CONTROL_5: case ARIZONA_FLL1_CONTROL_6: case ARIZONA_FLL1_CONTROL_7: - case ARIZONA_FLL1_LOOP_FILTER_TEST_1: - case ARIZONA_FLL1_NCO_TEST_0: case ARIZONA_FLL1_SYNCHRONISER_1: case ARIZONA_FLL1_SYNCHRONISER_2: case ARIZONA_FLL1_SYNCHRONISER_3: @@ -876,8 +870,6 @@ static bool cs47l24_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_CONTROL_5: case ARIZONA_FLL2_CONTROL_6: case ARIZONA_FLL2_CONTROL_7: - case ARIZONA_FLL2_LOOP_FILTER_TEST_1: - case ARIZONA_FLL2_NCO_TEST_0: case ARIZONA_FLL2_SYNCHRONISER_1: case ARIZONA_FLL2_SYNCHRONISER_2: case ARIZONA_FLL2_SYNCHRONISER_3: diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c index a9ad024ec6b0..8f873866ea60 100644 --- a/drivers/mfd/da9062-core.c +++ b/drivers/mfd/da9062-core.c @@ -388,11 +388,32 @@ static const struct regmap_range da9062_aa_volatile_ranges[] = { .range_min = DA9062AA_STATUS_D, .range_max = DA9062AA_EVENT_C, }, { - .range_min = DA9062AA_CONTROL_F, + .range_min = DA9062AA_CONTROL_A, + .range_max = DA9062AA_CONTROL_B, + }, { + .range_min = DA9062AA_CONTROL_E, .range_max = DA9062AA_CONTROL_F, }, { + .range_min = DA9062AA_BUCK2_CONT, + .range_max = DA9062AA_BUCK4_CONT, + }, { + .range_min = DA9062AA_BUCK3_CONT, + .range_max = DA9062AA_BUCK3_CONT, + }, { + .range_min = DA9062AA_LDO1_CONT, + .range_max = DA9062AA_LDO4_CONT, + }, { + .range_min = DA9062AA_DVC_1, + .range_max = DA9062AA_DVC_1, + }, { .range_min = DA9062AA_COUNT_S, .range_max = DA9062AA_SECOND_D, + }, { + .range_min = DA9062AA_SEQ, + .range_max = DA9062AA_SEQ, + }, { + .range_min = DA9062AA_EN_32K, + .range_max = DA9062AA_EN_32K, }, }; diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 2d4e3e0f4e94..73901084945f 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -74,18 +74,30 @@ static const struct regmap_range da9063_ad_writeable_ranges[] = { static const struct regmap_range da9063_ad_volatile_ranges[] = { { - .range_min = DA9063_REG_STATUS_A, + .range_min = DA9063_REG_PAGE_CON, .range_max = DA9063_REG_EVENT_D, }, { - .range_min = DA9063_REG_CONTROL_F, + .range_min = DA9063_REG_CONTROL_A, + .range_max = DA9063_REG_CONTROL_B, + }, { + .range_min = DA9063_REG_CONTROL_E, .range_max = DA9063_REG_CONTROL_F, }, { - .range_min = DA9063_REG_ADC_MAN, + .range_min = DA9063_REG_BCORE2_CONT, + .range_max = DA9063_REG_LDO11_CONT, + }, { + .range_min = DA9063_REG_DVC_1, .range_max = DA9063_REG_ADC_MAN, }, { .range_min = DA9063_REG_ADC_RES_L, .range_max = DA9063_AD_REG_SECOND_D, }, { + .range_min = DA9063_REG_SEQ, + .range_max = DA9063_REG_SEQ, + }, { + .range_min = DA9063_REG_EN_32K, + .range_max = DA9063_REG_EN_32K, + }, { .range_min = DA9063_AD_REG_MON_REG_5, .range_max = DA9063_AD_REG_MON_REG_6, }, @@ -152,18 +164,30 @@ static const struct regmap_range da9063_bb_writeable_ranges[] = { static const struct regmap_range da9063_bb_volatile_ranges[] = { { - .range_min = DA9063_REG_STATUS_A, + .range_min = DA9063_REG_PAGE_CON, .range_max = DA9063_REG_EVENT_D, }, { - .range_min = DA9063_REG_CONTROL_F, + .range_min = DA9063_REG_CONTROL_A, + .range_max = DA9063_REG_CONTROL_B, + }, { + .range_min = DA9063_REG_CONTROL_E, .range_max = DA9063_REG_CONTROL_F, }, { - .range_min = DA9063_REG_ADC_MAN, + .range_min = DA9063_REG_BCORE2_CONT, + .range_max = DA9063_REG_LDO11_CONT, + }, { + .range_min = DA9063_REG_DVC_1, .range_max = DA9063_REG_ADC_MAN, }, { .range_min = DA9063_REG_ADC_RES_L, .range_max = DA9063_BB_REG_SECOND_D, }, { + .range_min = DA9063_REG_SEQ, + .range_max = DA9063_REG_SEQ, + }, { + .range_min = DA9063_REG_EN_32K, + .range_max = DA9063_REG_EN_32K, + }, { .range_min = DA9063_BB_REG_MON_REG_5, .range_max = DA9063_BB_REG_MON_REG_6, }, diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 12099b09a9a7..c0a86aeb1733 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -739,20 +739,17 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div) if (!div && !requests[clkout]) return -EINVAL; - switch (clkout) { - case 0: + if (clkout == 0) { div_mask = PRCM_CLKOCR_CLKODIV0_MASK; mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK); bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) | (div << PRCM_CLKOCR_CLKODIV0_SHIFT)); - break; - case 1: + } else { div_mask = PRCM_CLKOCR_CLKODIV1_MASK; mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK | PRCM_CLKOCR_CLK1TYPE); bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) | (div << PRCM_CLKOCR_CLKODIV1_SHIFT)); - break; } bits &= mask; diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c new file mode 100644 index 000000000000..77b2675cf8f5 --- /dev/null +++ b/drivers/mfd/fsl-imx25-tsadc.c @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdesc.h> +#include <linux/irqdomain.h> +#include <linux/irq.h> +#include <linux/mfd/imx25-tsadc.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +static struct regmap_config mx25_tsadc_regmap_config = { + .fast_io = true, + .max_register = 8, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static void mx25_tsadc_irq_handler(struct irq_desc *desc) +{ + struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + u32 status; + + chained_irq_enter(chip, desc); + + regmap_read(tsadc->regs, MX25_TSC_TGSR, &status); + + if (status & MX25_TGSR_GCQ_INT) + generic_handle_irq(irq_find_mapping(tsadc->domain, 1)); + + if (status & MX25_TGSR_TCQ_INT) + generic_handle_irq(irq_find_mapping(tsadc->domain, 0)); + + chained_irq_exit(chip, desc); +} + +static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct mx25_tsadc *tsadc = d->host_data; + + irq_set_chip_data(irq, tsadc); + irq_set_chip_and_handler(irq, &dummy_irq_chip, + handle_level_irq); + irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); + + return 0; +} + +static struct irq_domain_ops mx25_tsadc_domain_ops = { + .map = mx25_tsadc_domain_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int mx25_tsadc_setup_irq(struct platform_device *pdev, + struct mx25_tsadc *tsadc) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "Failed to get irq\n"); + return irq; + } + + tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, + tsadc); + if (!tsadc->domain) { + dev_err(dev, "Failed to add irq domain\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, mx25_tsadc_irq_handler); + irq_set_handler_data(irq, tsadc); + + return 0; +} + +static void mx25_tsadc_setup_clk(struct platform_device *pdev, + struct mx25_tsadc *tsadc) +{ + unsigned clk_div; + + /* + * According to the datasheet the ADC clock should never + * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses + * a funny clock divider. To keep the ADC conversion time constant + * adapt the ADC internal clock divider to the IPG clock rate. + */ + + dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n", + clk_get_rate(tsadc->clk)); + + clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000); + dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div); + + /* adc clock = IPG clock / (2 * div + 2) */ + clk_div -= 2; + clk_div /= 2; + + /* + * the ADC clock divider changes its behaviour when values below 4 + * are used: it is fixed to "/ 10" in this case + */ + clk_div = max_t(unsigned, 4, clk_div); + + dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n", + clk_get_rate(tsadc->clk) / (2 * clk_div + 2)); + + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, + MX25_TGCR_ADCCLKCFG(0x1f), + MX25_TGCR_ADCCLKCFG(clk_div)); +} + +static int mx25_tsadc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct mx25_tsadc *tsadc; + struct resource *res; + int ret; + void __iomem *iomem; + + tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL); + if (!tsadc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iomem = devm_ioremap_resource(dev, res); + if (IS_ERR(iomem)) + return PTR_ERR(iomem); + + tsadc->regs = devm_regmap_init_mmio(dev, iomem, + &mx25_tsadc_regmap_config); + if (IS_ERR(tsadc->regs)) { + dev_err(dev, "Failed to initialize regmap\n"); + return PTR_ERR(tsadc->regs); + } + + tsadc->clk = devm_clk_get(dev, "ipg"); + if (IS_ERR(tsadc->clk)) { + dev_err(dev, "Failed to get ipg clock\n"); + return PTR_ERR(tsadc->clk); + } + + /* setup clock according to the datasheet */ + mx25_tsadc_setup_clk(pdev, tsadc); + + /* Enable clock and reset the component */ + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN, + MX25_TGCR_CLK_EN); + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST, + MX25_TGCR_TSC_RST); + + /* Setup powersaving mode, but enable internal reference voltage */ + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK, + MX25_TGCR_POWERMODE_SAVE); + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN, + MX25_TGCR_INTREFEN); + + ret = mx25_tsadc_setup_irq(pdev, tsadc); + if (ret) + return ret; + + platform_set_drvdata(pdev, tsadc); + + of_platform_populate(np, NULL, NULL, dev); + + return 0; +} + +static const struct of_device_id mx25_tsadc_ids[] = { + { .compatible = "fsl,imx25-tsadc" }, + { /* Sentinel */ } +}; + +static struct platform_driver mx25_tsadc_driver = { + .driver = { + .name = "mx25-tsadc", + .of_match_table = of_match_ptr(mx25_tsadc_ids), + }, + .probe = mx25_tsadc_probe, +}; +module_platform_driver(mx25_tsadc_driver); + +MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25"); +MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:mx25-tsadc"); diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c index 06f00d60be46..5a8d9c766633 100644 --- a/drivers/mfd/intel-lpss-acpi.c +++ b/drivers/mfd/intel-lpss-acpi.c @@ -44,8 +44,20 @@ static const struct intel_lpss_platform_info bxt_info = { .clk_rate = 100000000, }; +static struct property_entry bxt_i2c_properties[] = { + PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42), + PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), + PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), + { }, +}; + +static struct property_set bxt_i2c_pset = { + .properties = bxt_i2c_properties, +}; + static const struct intel_lpss_platform_info bxt_i2c_info = { .clk_rate = 133000000, + .pset = &bxt_i2c_pset, }; static const struct acpi_device_id intel_lpss_acpi_ids[] = { diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index a7136c7ae9fb..a19e57118641 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -107,12 +107,24 @@ static const struct intel_lpss_platform_info bxt_uart_info = { .pset = &uart_pset, }; +static struct property_entry bxt_i2c_properties[] = { + PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42), + PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), + PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), + { }, +}; + +static struct property_set bxt_i2c_pset = { + .properties = bxt_i2c_properties, +}; + static const struct intel_lpss_platform_info bxt_i2c_info = { .clk_rate = 133000000, + .pset = &bxt_i2c_pset, }; static const struct pci_device_id intel_lpss_pci_ids[] = { - /* BXT */ + /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x0ab0), (kernel_ulong_t)&bxt_i2c_info }, @@ -128,6 +140,23 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0ac4), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x0ac6), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x0aee), (kernel_ulong_t)&bxt_uart_info }, + /* BXT B-Step */ + { PCI_VDEVICE(INTEL, 0x1aac), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1aae), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1ab0), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1ab2), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1ab4), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1ab6), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1ab8), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1aba), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x1abc), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x1abe), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x1ac0), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x1ac2), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x1ac4), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info }, + /* APL */ { PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&bxt_i2c_info }, diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index 1743788f1595..1bbbe877ba7e 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -453,6 +453,7 @@ int intel_lpss_probe(struct device *dev, err_remove_ltr: intel_lpss_debugfs_remove(lpss); intel_lpss_ltr_hide(lpss); + intel_lpss_unregister_clock(lpss); err_clk_register: ida_simple_remove(&intel_lpss_devid_ida, lpss->devid); diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c index 042137465300..bdc5e27222c0 100644 --- a/drivers/mfd/intel_quark_i2c_gpio.c +++ b/drivers/mfd/intel_quark_i2c_gpio.c @@ -52,8 +52,6 @@ /* The Quark I2C controller source clock */ #define INTEL_QUARK_I2C_CLK_HZ 33000000 -#define INTEL_QUARK_I2C_NCLK 1 - struct intel_quark_mfd { struct pci_dev *pdev; struct clk *i2c_clk; @@ -128,30 +126,24 @@ MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids); static int intel_quark_register_i2c_clk(struct intel_quark_mfd *quark_mfd) { struct pci_dev *pdev = quark_mfd->pdev; - struct clk_lookup *i2c_clk_lookup; struct clk *i2c_clk; - int ret; - - i2c_clk_lookup = devm_kcalloc(&pdev->dev, INTEL_QUARK_I2C_NCLK, - sizeof(*i2c_clk_lookup), GFP_KERNEL); - if (!i2c_clk_lookup) - return -ENOMEM; - - i2c_clk_lookup[0].dev_id = INTEL_QUARK_I2C_CONTROLLER_CLK; i2c_clk = clk_register_fixed_rate(&pdev->dev, INTEL_QUARK_I2C_CONTROLLER_CLK, NULL, CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ); + if (IS_ERR(i2c_clk)) + return PTR_ERR(i2c_clk); - quark_mfd->i2c_clk_lookup = i2c_clk_lookup; quark_mfd->i2c_clk = i2c_clk; + quark_mfd->i2c_clk_lookup = clkdev_create(i2c_clk, NULL, + INTEL_QUARK_I2C_CONTROLLER_CLK); - ret = clk_register_clkdevs(i2c_clk, i2c_clk_lookup, - INTEL_QUARK_I2C_NCLK); - if (ret) - dev_err(&pdev->dev, "Fixed clk register failed: %d\n", ret); + if (!quark_mfd->i2c_clk_lookup) { + dev_err(&pdev->dev, "Fixed clk register failed\n"); + return -ENOMEM; + } - return ret; + return 0; } static void intel_quark_unregister_i2c_clk(struct pci_dev *pdev) diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c index a41859c55bda..df16fd1df68b 100644 --- a/drivers/mfd/ipaq-micro.c +++ b/drivers/mfd/ipaq-micro.c @@ -376,7 +376,7 @@ static const struct mfd_cell micro_cells[] = { { .name = "ipaq-micro-leds", }, }; -static int micro_resume(struct device *dev) +static int __maybe_unused micro_resume(struct device *dev) { struct ipaq_micro *micro = dev_get_drvdata(dev); diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index 98ecd136a21b..c1aff46e89d9 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -169,6 +169,7 @@ static const struct of_device_id max77686_pmic_dt_match[] = { }, { }, }; +MODULE_DEVICE_TABLE(of, max77686_pmic_dt_match); static int max77686_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) @@ -265,6 +266,7 @@ static int max77686_i2c_remove(struct i2c_client *i2c) static const struct i2c_device_id max77686_i2c_id[] = { { "max77686", TYPE_MAX77686 }, + { "max77802", TYPE_MAX77802 }, { } }; MODULE_DEVICE_TABLE(i2c, max77686_i2c_id); diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 1749c1c9f405..8e8d93249c09 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -19,11 +19,17 @@ #include <linux/regmap.h> #include <linux/mfd/core.h> #include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/core.h> #include <linux/mfd/mt6397/registers.h> +#include <linux/mfd/mt6323/registers.h> #define MT6397_RTC_BASE 0xe000 #define MT6397_RTC_SIZE 0x3e +#define MT6323_CID_CODE 0x23 +#define MT6391_CID_CODE 0x91 +#define MT6397_CID_CODE 0x97 + static const struct resource mt6397_rtc_resources[] = { { .start = MT6397_RTC_BASE, @@ -37,6 +43,13 @@ static const struct resource mt6397_rtc_resources[] = { }, }; +static const struct mfd_cell mt6323_devs[] = { + { + .name = "mt6323-regulator", + .of_compatible = "mediatek,mt6323-regulator" + }, +}; + static const struct mfd_cell mt6397_devs[] = { { .name = "mt6397-rtc", @@ -69,8 +82,10 @@ static void mt6397_irq_sync_unlock(struct irq_data *data) { struct mt6397_chip *mt6397 = irq_data_get_irq_chip_data(data); - regmap_write(mt6397->regmap, MT6397_INT_CON0, mt6397->irq_masks_cur[0]); - regmap_write(mt6397->regmap, MT6397_INT_CON1, mt6397->irq_masks_cur[1]); + regmap_write(mt6397->regmap, mt6397->int_con[0], + mt6397->irq_masks_cur[0]); + regmap_write(mt6397->regmap, mt6397->int_con[1], + mt6397->irq_masks_cur[1]); mutex_unlock(&mt6397->irqlock); } @@ -147,8 +162,8 @@ static irqreturn_t mt6397_irq_thread(int irq, void *data) { struct mt6397_chip *mt6397 = data; - mt6397_irq_handle_reg(mt6397, MT6397_INT_STATUS0, 0); - mt6397_irq_handle_reg(mt6397, MT6397_INT_STATUS1, 16); + mt6397_irq_handle_reg(mt6397, mt6397->int_status[0], 0); + mt6397_irq_handle_reg(mt6397, mt6397->int_status[1], 16); return IRQ_HANDLED; } @@ -177,8 +192,8 @@ static int mt6397_irq_init(struct mt6397_chip *mt6397) mutex_init(&mt6397->irqlock); /* Mask all interrupt sources */ - regmap_write(mt6397->regmap, MT6397_INT_CON0, 0x0); - regmap_write(mt6397->regmap, MT6397_INT_CON1, 0x0); + regmap_write(mt6397->regmap, mt6397->int_con[0], 0x0); + regmap_write(mt6397->regmap, mt6397->int_con[1], 0x0); mt6397->irq_domain = irq_domain_add_linear(mt6397->dev->of_node, MT6397_IRQ_NR, &mt6397_irq_domain_ops, mt6397); @@ -203,8 +218,8 @@ static int mt6397_irq_suspend(struct device *dev) { struct mt6397_chip *chip = dev_get_drvdata(dev); - regmap_write(chip->regmap, MT6397_INT_CON0, chip->wake_mask[0]); - regmap_write(chip->regmap, MT6397_INT_CON1, chip->wake_mask[1]); + regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]); + regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]); enable_irq_wake(chip->irq); @@ -215,8 +230,8 @@ static int mt6397_irq_resume(struct device *dev) { struct mt6397_chip *chip = dev_get_drvdata(dev); - regmap_write(chip->regmap, MT6397_INT_CON0, chip->irq_masks_cur[0]); - regmap_write(chip->regmap, MT6397_INT_CON1, chip->irq_masks_cur[1]); + regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]); + regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]); disable_irq_wake(chip->irq); @@ -230,34 +245,69 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend, static int mt6397_probe(struct platform_device *pdev) { int ret; - struct mt6397_chip *mt6397; + unsigned int id; + struct mt6397_chip *pmic; - mt6397 = devm_kzalloc(&pdev->dev, sizeof(*mt6397), GFP_KERNEL); - if (!mt6397) + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) return -ENOMEM; - mt6397->dev = &pdev->dev; + pmic->dev = &pdev->dev; + /* * mt6397 MFD is child device of soc pmic wrapper. * Regmap is set from its parent. */ - mt6397->regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (!mt6397->regmap) + pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pmic->regmap) return -ENODEV; - platform_set_drvdata(pdev, mt6397); + platform_set_drvdata(pdev, pmic); - mt6397->irq = platform_get_irq(pdev, 0); - if (mt6397->irq > 0) { - ret = mt6397_irq_init(mt6397); + ret = regmap_read(pmic->regmap, MT6397_CID, &id); + if (ret) { + dev_err(pmic->dev, "Failed to read chip id: %d\n", ret); + goto fail_irq; + } + + switch (id & 0xff) { + case MT6323_CID_CODE: + pmic->int_con[0] = MT6323_INT_CON0; + pmic->int_con[1] = MT6323_INT_CON1; + pmic->int_status[0] = MT6323_INT_STATUS0; + pmic->int_status[1] = MT6323_INT_STATUS1; + ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, + ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); + break; + + case MT6397_CID_CODE: + case MT6391_CID_CODE: + pmic->int_con[0] = MT6397_INT_CON0; + pmic->int_con[1] = MT6397_INT_CON1; + pmic->int_status[0] = MT6397_INT_STATUS0; + pmic->int_status[1] = MT6397_INT_STATUS1; + ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, + ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); + break; + + default: + dev_err(&pdev->dev, "unsupported chip: %d\n", id); + ret = -ENODEV; + break; + } + + pmic->irq = platform_get_irq(pdev, 0); + if (pmic->irq > 0) { + ret = mt6397_irq_init(pmic); if (ret) return ret; } - ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, - ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); - if (ret) +fail_irq: + if (ret) { + irq_domain_remove(pmic->irq_domain); dev_err(&pdev->dev, "failed to add child devices: %d\n", ret); + } return ret; } @@ -271,10 +321,17 @@ static int mt6397_remove(struct platform_device *pdev) static const struct of_device_id mt6397_of_match[] = { { .compatible = "mediatek,mt6397" }, + { .compatible = "mediatek,mt6323" }, { } }; MODULE_DEVICE_TABLE(of, mt6397_of_match); +static const struct platform_device_id mt6397_id[] = { + { "mt6397", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, mt6397_id); + static struct platform_driver mt6397_driver = { .probe = mt6397_probe, .remove = mt6397_remove, @@ -283,6 +340,7 @@ static struct platform_driver mt6397_driver = { .of_match_table = of_match_ptr(mt6397_of_match), .pm = &mt6397_pm_ops, }, + .id_table = mt6397_id, }; module_platform_driver(mt6397_driver); @@ -290,4 +348,3 @@ module_platform_driver(mt6397_driver); MODULE_AUTHOR("Flora Fu, MediaTek"); MODULE_DESCRIPTION("Driver for MediaTek MT6397 PMIC"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mt6397"); diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index e10f02f5d551..fc2b2d93f354 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -241,8 +241,8 @@ static const struct regmap_config rc5t583_regmap_config = { .reg_bits = 8, .val_bits = 8, .volatile_reg = volatile_reg, - .max_register = RC5T583_MAX_REGS, - .num_reg_defaults_raw = RC5T583_MAX_REGS, + .max_register = RC5T583_MAX_REG, + .num_reg_defaults_raw = RC5T583_NUM_REGS, .cache_type = REGCACHE_RBTREE, }; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 8222e374e4b1..fb8f9e8b75df 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -334,6 +334,31 @@ static const struct mfd_cell stmpe_keypad_cell = { }; /* + * PWM (1601, 2401, 2403) + */ +static struct resource stmpe_pwm_resources[] = { + { + .name = "PWM0", + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWM1", + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWM2", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_pwm_cell = { + .name = "stmpe-pwm", + .of_compatible = "st,stmpe-pwm", + .resources = stmpe_pwm_resources, + .num_resources = ARRAY_SIZE(stmpe_pwm_resources), +}; + +/* * STMPE801 */ static const u8 stmpe801_regs[] = { @@ -537,6 +562,11 @@ static struct stmpe_variant_block stmpe1601_blocks[] = { .irq = STMPE1601_IRQ_KEYPAD, .block = STMPE_BLOCK_KEYPAD, }, + { + .cell = &stmpe_pwm_cell, + .irq = STMPE1601_IRQ_PWM0, + .block = STMPE_BLOCK_PWM, + }, }; /* supported autosleep timeout delay (in msecs) */ @@ -771,6 +801,11 @@ static struct stmpe_variant_block stmpe24xx_blocks[] = { .irq = STMPE24XX_IRQ_KEYPAD, .block = STMPE_BLOCK_KEYPAD, }, + { + .cell = &stmpe_pwm_cell, + .irq = STMPE24XX_IRQ_PWM0, + .block = STMPE_BLOCK_PWM, + }, }; static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index b7aabeefab07..2f2225e845ef 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -36,7 +36,7 @@ struct syscon { struct list_head list; }; -static struct regmap_config syscon_regmap_config = { +static const struct regmap_config syscon_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, @@ -50,6 +50,7 @@ static struct syscon *of_syscon_register(struct device_node *np) u32 reg_io_width; int ret; struct regmap_config syscon_config = syscon_regmap_config; + struct resource res; if (!of_device_is_compatible(np, "syscon")) return ERR_PTR(-EINVAL); @@ -58,7 +59,12 @@ static struct syscon *of_syscon_register(struct device_node *np) if (!syscon) return ERR_PTR(-ENOMEM); - base = of_iomap(np, 0); + if (of_address_to_resource(np, 0, &res)) { + ret = -ENOMEM; + goto err_map; + } + + base = ioremap(res.start, resource_size(&res)); if (!base) { ret = -ENOMEM; goto err_map; @@ -81,6 +87,7 @@ static struct syscon *of_syscon_register(struct device_node *np) syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width * 8; + syscon_config.max_register = resource_size(&res) - reg_io_width; regmap = regmap_init_mmio(NULL, base, &syscon_config); if (IS_ERR(regmap)) { @@ -192,6 +199,7 @@ static int syscon_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct syscon_platform_data *pdata = dev_get_platdata(dev); struct syscon *syscon; + struct regmap_config syscon_config = syscon_regmap_config; struct resource *res; void __iomem *base; @@ -207,11 +215,10 @@ static int syscon_probe(struct platform_device *pdev) if (!base) return -ENOMEM; - syscon_regmap_config.max_register = res->end - res->start - 3; + syscon_config.max_register = res->end - res->start - 3; if (pdata) - syscon_regmap_config.name = pdata->label; - syscon->regmap = devm_regmap_init_mmio(dev, base, - &syscon_regmap_config); + syscon_config.name = pdata->label; + syscon->regmap = devm_regmap_init_mmio(dev, base, &syscon_config); if (IS_ERR(syscon->regmap)) { dev_err(dev, "regmap init failed\n"); return PTR_ERR(syscon->regmap); diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 83e615ed100a..495e4518fc29 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -1059,26 +1059,7 @@ EXPORT_SYMBOL(tps65013_set_low_pwr); static int __init tps_init(void) { - u32 tries = 3; - int status = -ENODEV; - - printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION); - - /* some boards have startup glitches */ - while (tries--) { - status = i2c_add_driver(&tps65010_driver); - if (the_tps) - break; - i2c_del_driver(&tps65010_driver); - if (!tries) { - printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME); - return -ENODEV; - } - pr_debug("%s: re-probe ...\n", DRIVER_NAME); - msleep(10); - } - - return status; + return i2c_add_driver(&tps65010_driver); } /* NOTE: this MUST be initialized before the other parts of the system * that rely on it ... but after the i2c bus on which this relies. diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c new file mode 100644 index 000000000000..43119a6867fe --- /dev/null +++ b/drivers/mfd/tps65086.c @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65912 driver + */ + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/module.h> + +#include <linux/mfd/tps65086.h> + +static const struct mfd_cell tps65086_cells[] = { + { .name = "tps65086-regulator", }, + { .name = "tps65086-gpio", }, +}; + +static const struct regmap_range tps65086_yes_ranges[] = { + regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ), + regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC), + regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL), + regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS), +}; + +static const struct regmap_access_table tps65086_volatile_table = { + .yes_ranges = tps65086_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges), +}; + +static const struct regmap_config tps65086_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &tps65086_volatile_table, +}; + +static const struct regmap_irq tps65086_irqs[] = { + REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK), + REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK), + REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK), +}; + +static struct regmap_irq_chip tps65086_irq_chip = { + .name = "tps65086", + .status_base = TPS65086_IRQ, + .mask_base = TPS65086_IRQ_MASK, + .ack_base = TPS65086_IRQ, + .init_ack_masked = true, + .num_regs = 1, + .irqs = tps65086_irqs, + .num_irqs = ARRAY_SIZE(tps65086_irqs), +}; + +static const struct of_device_id tps65086_of_match_table[] = { + { .compatible = "ti,tps65086", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tps65086_of_match_table); + +static int tps65086_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct tps65086 *tps; + unsigned int version; + int ret; + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + tps->irq = client->irq; + + tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config); + if (IS_ERR(tps->regmap)) { + dev_err(tps->dev, "Failed to initialize register map\n"); + return PTR_ERR(tps->regmap); + } + + ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version); + if (ret) { + dev_err(tps->dev, "Failed to read revision register\n"); + return ret; + } + + dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n", + (version & TPS65086_DEVICEID_PART_MASK), + (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A', + (version & TPS65086_DEVICEID_REV_MASK) >> 6); + + ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0, + &tps65086_irq_chip, &tps->irq_data); + if (ret) { + dev_err(tps->dev, "Failed to register IRQ chip\n"); + return ret; + } + + ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells, + ARRAY_SIZE(tps65086_cells), NULL, 0, + regmap_irq_get_domain(tps->irq_data)); + if (ret) { + regmap_del_irq_chip(tps->irq, tps->irq_data); + return ret; + } + + return 0; +} + +static int tps65086_remove(struct i2c_client *client) +{ + struct tps65086 *tps = i2c_get_clientdata(client); + + regmap_del_irq_chip(tps->irq, tps->irq_data); + + return 0; +} + +static const struct i2c_device_id tps65086_id_table[] = { + { "tps65086", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, tps65086_id_table); + +static struct i2c_driver tps65086_driver = { + .driver = { + .name = "tps65086", + .of_match_table = tps65086_of_match_table, + }, + .probe = tps65086_probe, + .remove = tps65086_remove, + .id_table = tps65086_id_table, +}; +module_i2c_driver(tps65086_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TPS65086 PMIC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index f88085ad9772..d7ec318c40c3 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -30,7 +30,6 @@ #include <linux/err.h> #define NUM_INT_REG 2 -#define TOTAL_NUM_REG 0x18 #define TPS65090_INT1_MASK_VAC_STATUS_CHANGE 1 #define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE 2 @@ -161,8 +160,8 @@ static bool is_volatile_reg(struct device *dev, unsigned int reg) static const struct regmap_config tps65090_regmap_config = { .reg_bits = 8, .val_bits = 8, - .max_register = TOTAL_NUM_REG, - .num_reg_defaults_raw = TOTAL_NUM_REG, + .max_register = TPS65090_MAX_REG, + .num_reg_defaults_raw = TPS65090_NUM_REGS, .cache_type = REGCACHE_RBTREE, .volatile_reg = is_volatile_reg, }; diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 0386eaf6be32..ab8b23b5bd22 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -297,7 +297,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ { 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */ { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ - { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */ { 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */ { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ @@ -314,7 +313,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */ { 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */ { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ - { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ { 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */ { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ @@ -338,7 +336,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */ { 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */ { 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */ - { 0x000002A7, 0x372C }, /* R679 - Mic Detect Level 2 */ + { 0x000002A7, 0x2C37 }, /* R679 - Mic Detect Level 2 */ { 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */ { 0x000002A9, 0x030A }, /* R681 - Mic Detect Level 4 */ { 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */ @@ -402,7 +400,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */ { 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */ { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */ - { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */ + { 0x00000440, 0x0FFF }, /* R1088 - DRE Enable */ { 0x00000442, 0x3F0A }, /* R1090 - DRE Control 2 */ { 0x00000443, 0xDC1F }, /* R1090 - DRE Control 3 */ { 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */ @@ -863,7 +861,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000C0F, 0x0400 }, /* R3087 - IRQ CTRL 1 */ { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */ { 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */ - { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */ + { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */ { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */ { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ @@ -984,7 +982,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */ { 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */ { 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */ - { 0x00000EE3, 0x0400 }, /* R3811 - ASRC_RATE2 */ + { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */ { 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */ { 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */ { 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */ @@ -1062,8 +1060,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL1_CONTROL_4: case ARIZONA_FLL1_CONTROL_5: case ARIZONA_FLL1_CONTROL_6: - case ARIZONA_FLL1_LOOP_FILTER_TEST_1: - case ARIZONA_FLL1_NCO_TEST_0: case ARIZONA_FLL1_CONTROL_7: case ARIZONA_FLL1_SYNCHRONISER_1: case ARIZONA_FLL1_SYNCHRONISER_2: @@ -1080,8 +1076,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_CONTROL_4: case ARIZONA_FLL2_CONTROL_5: case ARIZONA_FLL2_CONTROL_6: - case ARIZONA_FLL2_LOOP_FILTER_TEST_1: - case ARIZONA_FLL2_NCO_TEST_0: case ARIZONA_FLL2_CONTROL_7: case ARIZONA_FLL2_SYNCHRONISER_1: case ARIZONA_FLL2_SYNCHRONISER_2: @@ -1849,8 +1843,6 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_HAPTICS_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS: - case ARIZONA_FLL1_NCO_TEST_0: - case ARIZONA_FLL2_NCO_TEST_0: case ARIZONA_DAC_COMP_1: case ARIZONA_DAC_COMP_2: case ARIZONA_DAC_COMP_3: diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index c18e11f42b3f..8e74e71507e7 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -676,8 +676,8 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000008, 0x0019 }, /* R8 - Ctrl IF SPI CFG 1 */ { 0x00000009, 0x0001 }, /* R9 - Ctrl IF I2C1 CFG 1 */ { 0x0000000A, 0x0001 }, /* R10 - Ctrl IF I2C2 CFG 1 */ - { 0x0000000B, 0x0036 }, /* R11 - Ctrl IF I2C1 CFG 2 */ - { 0x0000000C, 0x0036 }, /* R12 - Ctrl IF I2C2 CFG 2 */ + { 0x0000000B, 0x001A }, /* R11 - Ctrl IF I2C1 CFG 2 */ + { 0x0000000C, 0x001A }, /* R12 - Ctrl IF I2C2 CFG 2 */ { 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */ { 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */ { 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */ @@ -723,14 +723,12 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */ { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ - { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */ + { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */ { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ { 0x00000175, 0x0006 }, /* R373 - FLL1 Control 5 */ { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ - { 0x00000177, 0x0281 }, /* R375 - FLL1 Loop Filter Test 1 */ - { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */ { 0x00000179, 0x0000 }, /* R376 - FLL1 Control 7 */ { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ @@ -740,15 +738,13 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000186, 0x0000 }, /* R390 - FLL1 Synchroniser 6 */ { 0x00000187, 0x0001 }, /* R390 - FLL1 Synchroniser 7 */ { 0x00000189, 0x0000 }, /* R393 - FLL1 Spread Spectrum */ - { 0x0000018A, 0x0004 }, /* R394 - FLL1 GPIO Clock */ - { 0x00000191, 0x0000 }, /* R401 - FLL2 Control 1 */ + { 0x0000018A, 0x000C }, /* R394 - FLL1 GPIO Clock */ + { 0x00000191, 0x0002 }, /* R401 - FLL2 Control 1 */ { 0x00000192, 0x0008 }, /* R402 - FLL2 Control 2 */ { 0x00000193, 0x0018 }, /* R403 - FLL2 Control 3 */ { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */ { 0x00000195, 0x000C }, /* R405 - FLL2 Control 5 */ { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ - { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ - { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */ { 0x00000199, 0x0000 }, /* R408 - FLL2 Control 7 */ { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ @@ -758,7 +754,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x000001A6, 0x0000 }, /* R422 - FLL2 Synchroniser 6 */ { 0x000001A7, 0x0001 }, /* R422 - FLL2 Synchroniser 7 */ { 0x000001A9, 0x0000 }, /* R425 - FLL2 Spread Spectrum */ - { 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */ + { 0x000001AA, 0x000C }, /* R426 - FLL2 GPIO Clock */ { 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */ { 0x00000210, 0x0184 }, /* R528 - LDO1 Control 1 */ { 0x00000213, 0x03E4 }, /* R531 - LDO2 Control 1 */ @@ -771,9 +767,9 @@ static const struct reg_default wm5110_reg_default[] = { { 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */ { 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */ { 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */ - { 0x000002A7, 0x372C }, /* R679 - Mic Detect Level 2 */ + { 0x000002A7, 0x2C37 }, /* R679 - Mic Detect Level 2 */ { 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */ - { 0x000002A9, 0x300A }, /* R681 - Mic Detect Level 4 */ + { 0x000002A9, 0x030A }, /* R681 - Mic Detect Level 4 */ { 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */ { 0x000002CB, 0x0000 }, /* R715 - Isolation control */ { 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */ @@ -810,53 +806,53 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000409, 0x0022 }, /* R1033 - Output Volume Ramp */ { 0x00000410, 0x0080 }, /* R1040 - Output Path Config 1L */ { 0x00000411, 0x0180 }, /* R1041 - DAC Digital Volume 1L */ - { 0x00000412, 0x0080 }, /* R1042 - DAC Volume Limit 1L */ + { 0x00000412, 0x0081 }, /* R1042 - DAC Volume Limit 1L */ { 0x00000413, 0x0001 }, /* R1043 - Noise Gate Select 1L */ { 0x00000414, 0x0080 }, /* R1044 - Output Path Config 1R */ { 0x00000415, 0x0180 }, /* R1045 - DAC Digital Volume 1R */ - { 0x00000416, 0x0080 }, /* R1046 - DAC Volume Limit 1R */ + { 0x00000416, 0x0081 }, /* R1046 - DAC Volume Limit 1R */ { 0x00000417, 0x0002 }, /* R1047 - Noise Gate Select 1R */ { 0x00000418, 0x0080 }, /* R1048 - Output Path Config 2L */ { 0x00000419, 0x0180 }, /* R1049 - DAC Digital Volume 2L */ - { 0x0000041A, 0x0080 }, /* R1050 - DAC Volume Limit 2L */ + { 0x0000041A, 0x0081 }, /* R1050 - DAC Volume Limit 2L */ { 0x0000041B, 0x0004 }, /* R1051 - Noise Gate Select 2L */ { 0x0000041C, 0x0080 }, /* R1052 - Output Path Config 2R */ { 0x0000041D, 0x0180 }, /* R1053 - DAC Digital Volume 2R */ - { 0x0000041E, 0x0080 }, /* R1054 - DAC Volume Limit 2R */ + { 0x0000041E, 0x0081 }, /* R1054 - DAC Volume Limit 2R */ { 0x0000041F, 0x0008 }, /* R1055 - Noise Gate Select 2R */ { 0x00000420, 0x0080 }, /* R1056 - Output Path Config 3L */ { 0x00000421, 0x0180 }, /* R1057 - DAC Digital Volume 3L */ - { 0x00000422, 0x0080 }, /* R1058 - DAC Volume Limit 3L */ + { 0x00000422, 0x0081 }, /* R1058 - DAC Volume Limit 3L */ { 0x00000423, 0x0010 }, /* R1059 - Noise Gate Select 3L */ { 0x00000424, 0x0080 }, /* R1060 - Output Path Config 3R */ { 0x00000425, 0x0180 }, /* R1061 - DAC Digital Volume 3R */ - { 0x00000426, 0x0080 }, /* R1062 - DAC Volume Limit 3R */ + { 0x00000426, 0x0081 }, /* R1062 - DAC Volume Limit 3R */ { 0x00000427, 0x0020 }, /* R1063 - Noise Gate Select 3R */ { 0x00000428, 0x0000 }, /* R1064 - Output Path Config 4L */ { 0x00000429, 0x0180 }, /* R1065 - DAC Digital Volume 4L */ - { 0x0000042A, 0x0080 }, /* R1066 - Out Volume 4L */ + { 0x0000042A, 0x0081 }, /* R1066 - Out Volume 4L */ { 0x0000042B, 0x0040 }, /* R1067 - Noise Gate Select 4L */ { 0x0000042C, 0x0000 }, /* R1068 - Output Path Config 4R */ { 0x0000042D, 0x0180 }, /* R1069 - DAC Digital Volume 4R */ - { 0x0000042E, 0x0080 }, /* R1070 - Out Volume 4R */ + { 0x0000042E, 0x0081 }, /* R1070 - Out Volume 4R */ { 0x0000042F, 0x0080 }, /* R1071 - Noise Gate Select 4R */ { 0x00000430, 0x0000 }, /* R1072 - Output Path Config 5L */ { 0x00000431, 0x0180 }, /* R1073 - DAC Digital Volume 5L */ - { 0x00000432, 0x0080 }, /* R1074 - DAC Volume Limit 5L */ + { 0x00000432, 0x0081 }, /* R1074 - DAC Volume Limit 5L */ { 0x00000433, 0x0100 }, /* R1075 - Noise Gate Select 5L */ { 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */ { 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */ - { 0x00000436, 0x0080 }, /* R1078 - DAC Volume Limit 5R */ + { 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */ { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */ { 0x00000438, 0x0000 }, /* R1080 - Output Path Config 6L */ { 0x00000439, 0x0180 }, /* R1081 - DAC Digital Volume 6L */ - { 0x0000043A, 0x0080 }, /* R1082 - DAC Volume Limit 6L */ + { 0x0000043A, 0x0081 }, /* R1082 - DAC Volume Limit 6L */ { 0x0000043B, 0x0400 }, /* R1083 - Noise Gate Select 6L */ { 0x0000043C, 0x0000 }, /* R1084 - Output Path Config 6R */ { 0x0000043D, 0x0180 }, /* R1085 - DAC Digital Volume 6R */ - { 0x0000043E, 0x0080 }, /* R1086 - DAC Volume Limit 6R */ + { 0x0000043E, 0x0081 }, /* R1086 - DAC Volume Limit 6R */ { 0x0000043F, 0x0800 }, /* R1087 - Noise Gate Select 6R */ - { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */ + { 0x00000440, 0x003F }, /* R1088 - DRE Enable */ { 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */ { 0x00000458, 0x0000 }, /* R1112 - Noise Gate Control */ { 0x00000490, 0x0069 }, /* R1168 - PDM SPK1 CTRL 1 */ @@ -864,8 +860,8 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000492, 0x0069 }, /* R1170 - PDM SPK2 CTRL 1 */ { 0x00000493, 0x0000 }, /* R1171 - PDM SPK2 CTRL 2 */ { 0x000004A0, 0x3480 }, /* R1184 - HP1 Short Circuit Ctrl */ - { 0x000004A1, 0x3480 }, /* R1185 - HP2 Short Circuit Ctrl */ - { 0x000004A2, 0x3480 }, /* R1186 - HP3 Short Circuit Ctrl */ + { 0x000004A1, 0x3400 }, /* R1185 - HP2 Short Circuit Ctrl */ + { 0x000004A2, 0x3400 }, /* R1186 - HP3 Short Circuit Ctrl */ { 0x00000500, 0x000C }, /* R1280 - AIF1 BCLK Ctrl */ { 0x00000501, 0x0008 }, /* R1281 - AIF1 Tx Pin Ctrl */ { 0x00000502, 0x0000 }, /* R1282 - AIF1 Rx Pin Ctrl */ @@ -1483,23 +1479,23 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */ { 0x00000C18, 0x0000 }, /* R3096 - GP Switch 1 */ { 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */ - { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */ + { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */ { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */ { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ { 0x00000C25, 0x0000 }, /* R3109 - Misc Pad Ctrl 6 */ - { 0x00000C30, 0x8282 }, /* R3120 - Misc Pad Ctrl 7 */ - { 0x00000C31, 0x0082 }, /* R3121 - Misc Pad Ctrl 8 */ - { 0x00000C32, 0x8282 }, /* R3122 - Misc Pad Ctrl 9 */ - { 0x00000C33, 0x8282 }, /* R3123 - Misc Pad Ctrl 10 */ - { 0x00000C34, 0x8282 }, /* R3124 - Misc Pad Ctrl 11 */ - { 0x00000C35, 0x8282 }, /* R3125 - Misc Pad Ctrl 12 */ - { 0x00000C36, 0x8282 }, /* R3126 - Misc Pad Ctrl 13 */ - { 0x00000C37, 0x8282 }, /* R3127 - Misc Pad Ctrl 14 */ - { 0x00000C38, 0x8282 }, /* R3128 - Misc Pad Ctrl 15 */ - { 0x00000C39, 0x8282 }, /* R3129 - Misc Pad Ctrl 16 */ - { 0x00000C3A, 0x8282 }, /* R3130 - Misc Pad Ctrl 17 */ - { 0x00000C3B, 0x8282 }, /* R3131 - Misc Pad Ctrl 18 */ + { 0x00000C30, 0x0404 }, /* R3120 - Misc Pad Ctrl 7 */ + { 0x00000C31, 0x0004 }, /* R3121 - Misc Pad Ctrl 8 */ + { 0x00000C32, 0x0404 }, /* R3122 - Misc Pad Ctrl 9 */ + { 0x00000C33, 0x0404 }, /* R3123 - Misc Pad Ctrl 10 */ + { 0x00000C34, 0x0404 }, /* R3124 - Misc Pad Ctrl 11 */ + { 0x00000C35, 0x0404 }, /* R3125 - Misc Pad Ctrl 12 */ + { 0x00000C36, 0x0404 }, /* R3126 - Misc Pad Ctrl 13 */ + { 0x00000C37, 0x0404 }, /* R3127 - Misc Pad Ctrl 14 */ + { 0x00000C38, 0x0004 }, /* R3128 - Misc Pad Ctrl 15 */ + { 0x00000C39, 0x0404 }, /* R3129 - Misc Pad Ctrl 16 */ + { 0x00000C3A, 0x0404 }, /* R3130 - Misc Pad Ctrl 17 */ + { 0x00000C3B, 0x0404 }, /* R3131 - Misc Pad Ctrl 18 */ { 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */ { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */ { 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */ @@ -1641,7 +1637,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000F0D, 0x0000 }, /* R3853 - ANC Coefficient */ { 0x00000F0E, 0x0000 }, /* R3854 - ANC Coefficient */ { 0x00000F0F, 0x0000 }, /* R3855 - ANC Coefficient */ - { 0x00000F10, 0x0000 }, /* R3856 - ANC Coefficient */ + { 0x00000F10, 0x0001 }, /* R3856 - ANC Coefficient */ { 0x00000F11, 0x0000 }, /* R3857 - ANC Coefficient */ { 0x00000F12, 0x0000 }, /* R3858 - ANC Coefficient */ { 0x00000F15, 0x0000 }, /* R3861 - FCL Filter Control */ @@ -1947,8 +1943,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL1_CONTROL_5: case ARIZONA_FLL1_CONTROL_6: case ARIZONA_FLL1_CONTROL_7: - case ARIZONA_FLL1_LOOP_FILTER_TEST_1: - case ARIZONA_FLL1_NCO_TEST_0: case ARIZONA_FLL1_SYNCHRONISER_1: case ARIZONA_FLL1_SYNCHRONISER_2: case ARIZONA_FLL1_SYNCHRONISER_3: @@ -1965,8 +1959,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_CONTROL_5: case ARIZONA_FLL2_CONTROL_6: case ARIZONA_FLL2_CONTROL_7: - case ARIZONA_FLL2_LOOP_FILTER_TEST_1: - case ARIZONA_FLL2_NCO_TEST_0: case ARIZONA_FLL2_SYNCHRONISER_1: case ARIZONA_FLL2_SYNCHRONISER_2: case ARIZONA_FLL2_SYNCHRONISER_3: diff --git a/drivers/mfd/wm8998-tables.c b/drivers/mfd/wm8998-tables.c index 4c2dce77cdfc..a0de3002cdad 100644 --- a/drivers/mfd/wm8998-tables.c +++ b/drivers/mfd/wm8998-tables.c @@ -229,8 +229,6 @@ static const struct reg_default wm8998_reg_default[] = { { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ { 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */ { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ - { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */ - { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */ { 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */ { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ @@ -247,8 +245,6 @@ static const struct reg_default wm8998_reg_default[] = { { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */ { 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */ { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ - { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ - { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */ { 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */ { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ @@ -320,7 +316,7 @@ static const struct reg_default wm8998_reg_default[] = { { 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */ { 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */ { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */ - { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */ + { 0x00000440, 0x002F }, /* R1088 - DRE Enable */ { 0x00000441, 0xC759 }, /* R1089 - DRE Control 1 */ { 0x00000442, 0x2A08 }, /* R1089 - DRE Control 2 */ { 0x00000443, 0x5CFA }, /* R1089 - DRE Control 3 */ @@ -686,7 +682,7 @@ static const struct reg_default wm8998_reg_default[] = { { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */ { 0x00000C18, 0x0000 }, /* R3096 - GP Switch 1 */ { 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */ - { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */ + { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */ { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */ { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ @@ -888,8 +884,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL1_CONTROL_5: case ARIZONA_FLL1_CONTROL_6: case ARIZONA_FLL1_CONTROL_7: - case ARIZONA_FLL1_LOOP_FILTER_TEST_1: - case ARIZONA_FLL1_NCO_TEST_0: case ARIZONA_FLL1_SYNCHRONISER_1: case ARIZONA_FLL1_SYNCHRONISER_2: case ARIZONA_FLL1_SYNCHRONISER_3: @@ -906,8 +900,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_CONTROL_5: case ARIZONA_FLL2_CONTROL_6: case ARIZONA_FLL2_CONTROL_7: - case ARIZONA_FLL2_LOOP_FILTER_TEST_1: - case ARIZONA_FLL2_NCO_TEST_0: case ARIZONA_FLL2_SYNCHRONISER_1: case ARIZONA_FLL2_SYNCHRONISER_2: case ARIZONA_FLL2_SYNCHRONISER_3: |