diff options
Diffstat (limited to 'drivers/mfd/wm8350-core.c')
-rw-r--r-- | drivers/mfd/wm8350-core.c | 266 |
1 files changed, 231 insertions, 35 deletions
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 0d47fb9e4b3b..3a273ccef3f2 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -63,7 +63,6 @@ */ static DEFINE_MUTEX(io_mutex); static DEFINE_MUTEX(reg_lock_mutex); -static DEFINE_MUTEX(auxadc_mutex); /* Perform a physical read from the device. */ @@ -299,6 +298,13 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs, } EXPORT_SYMBOL_GPL(wm8350_block_write); +/** + * wm8350_reg_lock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function enables that lock. + */ int wm8350_reg_lock(struct wm8350 *wm8350) { u16 key = WM8350_LOCK_KEY; @@ -314,6 +320,15 @@ int wm8350_reg_lock(struct wm8350 *wm8350) } EXPORT_SYMBOL_GPL(wm8350_reg_lock); +/** + * wm8350_reg_unlock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function disables that lock so updates + * can be performed. For maximum safety this should be done only when + * required. + */ int wm8350_reg_unlock(struct wm8350 *wm8350) { u16 key = WM8350_UNLOCK_KEY; @@ -1066,38 +1081,158 @@ int wm8350_unmask_irq(struct wm8350 *wm8350, int irq) } EXPORT_SYMBOL_GPL(wm8350_unmask_irq); +int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) +{ + u16 reg, result = 0; + int tries = 5; + + if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP) + return -EINVAL; + if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP + && (scale != 0 || vref != 0)) + return -EINVAL; + + mutex_lock(&wm8350->auxadc_mutex); + + /* Turn on the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA); + + if (scale || vref) { + reg = scale << 13; + reg |= vref << 12; + wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg); + } + + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + reg |= 1 << channel | WM8350_AUXADC_POLL; + wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg); + + do { + schedule_timeout_interruptible(1); + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + } while (tries-- && (reg & WM8350_AUXADC_POLL)); + + if (!tries) + dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); + else + result = wm8350_reg_read(wm8350, + WM8350_AUX1_READBACK + channel); + + /* Turn off the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, + reg & ~WM8350_AUXADC_ENA); + + mutex_unlock(&wm8350->auxadc_mutex); + + return result & WM8350_AUXADC_DATA1_MASK; +} +EXPORT_SYMBOL_GPL(wm8350_read_auxadc); + /* * Cache is always host endian. */ -static int wm8350_create_cache(struct wm8350 *wm8350, int mode) +static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) { int i, ret = 0; u16 value; const u16 *reg_map; - switch (mode) { -#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + switch (type) { case 0: - reg_map = wm8350_mode0_defaults; - break; + switch (mode) { +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + case 0: + reg_map = wm8350_mode0_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 - case 1: - reg_map = wm8350_mode1_defaults; - break; + case 1: + reg_map = wm8350_mode1_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 - case 2: - reg_map = wm8350_mode2_defaults; - break; + case 2: + reg_map = wm8350_mode2_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 - case 3: - reg_map = wm8350_mode3_defaults; + case 3: + reg_map = wm8350_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8350 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + + case 1: + switch (mode) { +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0 + case 0: + reg_map = wm8351_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1 + case 1: + reg_map = wm8351_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2 + case 2: + reg_map = wm8351_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3 + case 3: + reg_map = wm8351_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8351 configuration mode %d not supported\n", + mode); + return -EINVAL; + } break; + + case 2: + switch (mode) { +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 + case 0: + reg_map = wm8352_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1 + case 1: + reg_map = wm8352_mode1_defaults; + break; #endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2 + case 2: + reg_map = wm8352_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3 + case 3: + reg_map = wm8352_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8352 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + default: - dev_err(wm8350->dev, "Configuration mode %d not supported\n", + dev_err(wm8350->dev, + "WM835x configuration mode %d not supported\n", mode); return -EINVAL; } @@ -1163,53 +1298,113 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, struct wm8350_platform_data *pdata) { int ret = -EINVAL; - u16 id1, id2, mask, mode; + u16 id1, id2, mask_rev; + u16 cust_id, mode, chip_rev; /* get WM8350 revision and config mode */ wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev); id1 = be16_to_cpu(id1); id2 = be16_to_cpu(id2); + mask_rev = be16_to_cpu(mask_rev); - if (id1 == 0x6143) { - switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) { + if (id1 != 0x6143) { + dev_err(wm8350->dev, + "Device with ID %x is not a WM8350\n", id1); + ret = -ENODEV; + goto err; + } + + mode = id2 & WM8350_CONF_STS_MASK >> 10; + cust_id = id2 & WM8350_CUST_ID_MASK; + chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12; + dev_info(wm8350->dev, + "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n", + mode, cust_id, mask_rev, chip_rev); + + if (cust_id != 0) { + dev_err(wm8350->dev, "Unsupported CUST_ID\n"); + ret = -ENODEV; + goto err; + } + + switch (mask_rev) { + case 0: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + + switch (chip_rev) { case WM8350_REV_E: - dev_info(wm8350->dev, "Found Rev E device\n"); - wm8350->rev = WM8350_REV_E; + dev_info(wm8350->dev, "WM8350 Rev E\n"); break; case WM8350_REV_F: - dev_info(wm8350->dev, "Found Rev F device\n"); - wm8350->rev = WM8350_REV_F; + dev_info(wm8350->dev, "WM8350 Rev F\n"); break; case WM8350_REV_G: - dev_info(wm8350->dev, "Found Rev G device\n"); - wm8350->rev = WM8350_REV_G; + dev_info(wm8350->dev, "WM8350 Rev G\n"); + wm8350->power.rev_g_coeff = 1; + break; + case WM8350_REV_H: + dev_info(wm8350->dev, "WM8350 Rev H\n"); + wm8350->power.rev_g_coeff = 1; break; default: /* For safety we refuse to run on unknown hardware */ - dev_info(wm8350->dev, "Found unknown rev\n"); + dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n"); ret = -ENODEV; goto err; } - } else { - dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n", - id1); + break; + + case 1: + wm8350->pmic.max_dcdc = WM8350_DCDC_4; + wm8350->pmic.max_isink = WM8350_ISINK_A; + + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8351 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + case 2: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8352 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + default: + dev_err(wm8350->dev, "Unknown MASK_REV\n"); ret = -ENODEV; goto err; } - mode = id2 & WM8350_CONF_STS_MASK >> 10; - mask = id2 & WM8350_CUST_ID_MASK; - dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask); - - ret = wm8350_create_cache(wm8350, mode); + ret = wm8350_create_cache(wm8350, mask_rev, mode); if (ret < 0) { - printk(KERN_ERR "wm8350: failed to create register cache\n"); + dev_err(wm8350->dev, "Failed to create register cache\n"); return ret; } - if (pdata->init) { + if (pdata && pdata->init) { ret = pdata->init(wm8350); if (ret != 0) { dev_err(wm8350->dev, "Platform init() failed: %d\n", @@ -1218,6 +1413,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } } + mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); if (irq) { |