diff options
Diffstat (limited to 'drivers/mfd/omap-usb-host.c')
-rw-r--r-- | drivers/mfd/omap-usb-host.c | 238 |
1 files changed, 15 insertions, 223 deletions
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 41088ecbb2a9..23cec57c02ba 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/delay.h> -#include <linux/platform_device.h> #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> @@ -36,63 +35,6 @@ /* OMAP USBHOST Register addresses */ -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 -#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 -#define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 -#define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 -#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 -#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 -#define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 -#define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 -#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA -#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB - -#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) -#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) -#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) -#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) -#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) - -#define OMAP_TLL_CHANNEL_COUNT 3 -#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) -#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) -#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) - /* UHH Register Set */ #define OMAP_UHH_REVISION (0x00) #define OMAP_UHH_SYSCONFIG (0x10) @@ -132,8 +74,6 @@ #define OMAP4_P2_MODE_TLL (1 << 18) #define OMAP4_P2_MODE_HSIC (3 << 18) -#define OMAP_REV2_TLL_CHANNEL_COUNT 2 - #define OMAP_UHH_DEBUG_CSR (0x44) /* Values of UHH_REVISION - Note: these are not given in the TRM */ @@ -153,15 +93,12 @@ struct usbhs_hcd_omap { struct clk *xclk60mhsp2_ck; struct clk *utmi_p1_fck; struct clk *usbhost_p1_fck; - struct clk *usbtll_p1_fck; struct clk *utmi_p2_fck; struct clk *usbhost_p2_fck; - struct clk *usbtll_p2_fck; struct clk *init_60m_fclk; struct clk *ehci_logic_fck; void __iomem *uhh_base; - void __iomem *tll_base; struct usbhs_omap_platform_data platdata; @@ -336,93 +273,6 @@ static bool is_ohci_port(enum usbhs_omap_port_mode pmode) } } -/* - * convert the port-mode enum to a value we can use in the FSLSMODE - * field of USBTLL_CHANNEL_CONF - */ -static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) -{ - switch (mode) { - case OMAP_USBHS_PORT_MODE_UNUSED: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; - - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - return OMAP_TLL_FSLSMODE_3PIN_PHY; - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - return OMAP_TLL_FSLSMODE_4PIN_PHY; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; - - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - return OMAP_TLL_FSLSMODE_3PIN_TLL; - - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - return OMAP_TLL_FSLSMODE_4PIN_TLL; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; - default: - pr_warning("Invalid port mode, using default\n"); - return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; - } -} - -static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) -{ - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = dev->platform_data; - unsigned reg; - int i; - - /* Program Common TLL register */ - reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON - | OMAP_TLL_SHARED_CONF_USB_DIVRATION); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; - - usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Enable channels now */ - for (i = 0; i < tll_channel_count; i++) { - reg = usbhs_read(omap->tll_base, - OMAP_TLL_CHANNEL_CONF(i)); - - if (is_ohci_port(pdata->port_mode[i])) { - reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) - << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; - reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; - } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { - - /* Disable AutoIdle, BitStuffing and use SDR Mode */ - reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE - | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF - | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - - } else - continue; - - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - usbhs_write(omap->tll_base, - OMAP_TLL_CHANNEL_CONF(i), reg); - - usbhs_writeb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); - } -} - static int usbhs_runtime_resume(struct device *dev) { struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); @@ -436,19 +286,17 @@ static int usbhs_runtime_resume(struct device *dev) return -ENODEV; } + omap_tll_enable(); spin_lock_irqsave(&omap->lock, flags); if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck)) clk_enable(omap->ehci_logic_fck); - if (is_ehci_tll_mode(pdata->port_mode[0])) { + if (is_ehci_tll_mode(pdata->port_mode[0])) clk_enable(omap->usbhost_p1_fck); - clk_enable(omap->usbtll_p1_fck); - } - if (is_ehci_tll_mode(pdata->port_mode[1])) { + if (is_ehci_tll_mode(pdata->port_mode[1])) clk_enable(omap->usbhost_p2_fck); - clk_enable(omap->usbtll_p2_fck); - } + clk_enable(omap->utmi_p1_fck); clk_enable(omap->utmi_p2_fck); @@ -472,14 +320,11 @@ static int usbhs_runtime_suspend(struct device *dev) spin_lock_irqsave(&omap->lock, flags); - if (is_ehci_tll_mode(pdata->port_mode[0])) { + if (is_ehci_tll_mode(pdata->port_mode[0])) clk_disable(omap->usbhost_p1_fck); - clk_disable(omap->usbtll_p1_fck); - } - if (is_ehci_tll_mode(pdata->port_mode[1])) { + if (is_ehci_tll_mode(pdata->port_mode[1])) clk_disable(omap->usbhost_p2_fck); - clk_disable(omap->usbtll_p2_fck); - } + clk_disable(omap->utmi_p2_fck); clk_disable(omap->utmi_p1_fck); @@ -487,6 +332,7 @@ static int usbhs_runtime_suspend(struct device *dev) clk_disable(omap->ehci_logic_fck); spin_unlock_irqrestore(&omap->lock, flags); + omap_tll_disable(); return 0; } @@ -500,8 +346,6 @@ static void omap_usbhs_init(struct device *dev) dev_dbg(dev, "starting TI HSUSB Controller\n"); - pm_runtime_get_sync(dev); - if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) gpio_request_one(pdata->ehci_data->reset_gpio_port[0], @@ -515,6 +359,7 @@ static void omap_usbhs_init(struct device *dev) udelay(10); } + pm_runtime_get_sync(dev); spin_lock_irqsave(&omap->lock, flags); omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -580,22 +425,9 @@ static void omap_usbhs_init(struct device *dev) usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - if (is_ehci_tll_mode(pdata->port_mode[0]) || - is_ehci_tll_mode(pdata->port_mode[1]) || - is_ehci_tll_mode(pdata->port_mode[2]) || - (is_ohci_port(pdata->port_mode[0])) || - (is_ohci_port(pdata->port_mode[1])) || - (is_ohci_port(pdata->port_mode[2]))) { - - /* Enable UTMI mode for required TLL channels */ - if (is_omap_usbhs_rev2(omap)) - usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); - else - usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); - } - spin_unlock_irqrestore(&omap->lock, flags); + pm_runtime_put_sync(dev); if (pdata->ehci_data->phy_reset) { /* Hold the PHY in RESET for enough time till * PHY is settled and ready @@ -610,8 +442,6 @@ static void omap_usbhs_init(struct device *dev) gpio_set_value_cansleep (pdata->ehci_data->reset_gpio_port[1], 1); } - - pm_runtime_put_sync(dev); } static void omap_usbhs_deinit(struct device *dev) @@ -714,32 +544,18 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) goto err_xclk60mhsp2_ck; } - omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); - if (IS_ERR(omap->usbtll_p1_fck)) { - ret = PTR_ERR(omap->usbtll_p1_fck); - dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); if (IS_ERR(omap->usbhost_p2_fck)) { ret = PTR_ERR(omap->usbhost_p2_fck); dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbtll_p1_fck; - } - - omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); - if (IS_ERR(omap->usbtll_p2_fck)) { - ret = PTR_ERR(omap->usbtll_p2_fck); - dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); - goto err_usbhost_p2_fck; + goto err_usbhost_p1_fck; } omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); if (IS_ERR(omap->init_60m_fclk)) { ret = PTR_ERR(omap->init_60m_fclk); dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbtll_p2_fck; + goto err_usbhost_p2_fck; } if (is_ehci_phy_mode(pdata->port_mode[0])) { @@ -785,20 +601,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) goto err_init_60m_fclk; } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); - if (!res) { - dev_err(dev, "UHH EHCI get resource failed\n"); - ret = -ENODEV; - goto err_tll; - } - - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll; - } - platform_set_drvdata(pdev, omap); omap_usbhs_init(dev); @@ -812,23 +614,14 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) err_alloc: omap_usbhs_deinit(&pdev->dev); - iounmap(omap->tll_base); - -err_tll: iounmap(omap->uhh_base); err_init_60m_fclk: clk_put(omap->init_60m_fclk); -err_usbtll_p2_fck: - clk_put(omap->usbtll_p2_fck); - err_usbhost_p2_fck: clk_put(omap->usbhost_p2_fck); -err_usbtll_p1_fck: - clk_put(omap->usbtll_p1_fck); - err_usbhost_p1_fck: clk_put(omap->usbhost_p1_fck); @@ -864,12 +657,9 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); omap_usbhs_deinit(&pdev->dev); - iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); - clk_put(omap->usbtll_p2_fck); clk_put(omap->usbhost_p2_fck); - clk_put(omap->usbtll_p1_fck); clk_put(omap->usbhost_p1_fck); clk_put(omap->xclk60mhsp2_ck); clk_put(omap->utmi_p2_fck); @@ -910,8 +700,10 @@ static int __init omap_usbhs_drvinit(void) * init before ehci and ohci drivers; * The usbhs core driver should be initialized much before * the omap ehci and ohci probe functions are called. + * This usbhs core driver should be initialized after + * usb tll driver */ -fs_initcall(omap_usbhs_drvinit); +fs_initcall_sync(omap_usbhs_drvinit); static void __exit omap_usbhs_drvexit(void) { |