diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 120 |
1 files changed, 81 insertions, 39 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11e44386fa9b..e129c820df7d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -106,6 +106,19 @@ config UCB1400_CORE To compile this driver as a module, choose M here: the module will be called ucb1400_core. +config MFD_LM3533 + tristate "LM3533 Lighting Power chip" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to enable support for National Semiconductor / TI + LM3533 Lighting Power chips. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the LED, + backlight or ambient-light-sensor functionality of the device. + config TPS6105X tristate "TPS61050/61052 Boost Converters" depends on I2C @@ -162,6 +175,7 @@ config MFD_TPS6586X bool "TPS6586x Power Management chips" depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS select MFD_CORE + depends on REGULATOR help If you say yes here you get support for the TPS6586X series of Power Management chips. @@ -176,8 +190,8 @@ config MFD_TPS65910 bool "TPS65910 Power Management chip" depends on I2C=y && GPIOLIB select MFD_CORE - select GPIO_TPS65910 select REGMAP_I2C + select IRQ_DOMAIN help if you say yes here you get support for the TPS65910 series of Power Management chips. @@ -408,13 +422,26 @@ config PMIC_ADP5520 individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. +config MFD_MAX77693 + bool "Maxim Semiconductor MAX77693 PMIC Support" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Say yes here to support for Maxim Semiconductor MAX77693. + This is a companion Power Management IC with Flash, Haptic, Charger, + and MUIC(Micro USB Interface Controller) controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help Say yes here to support for Maxim Semiconductor MAX8925. This is - a Power Management IC. This driver provies common support for + a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -437,7 +464,7 @@ config MFD_MAX8998 help Say yes here to support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -448,14 +475,14 @@ config MFD_S5M_CORE select REGMAP_I2C help Support for the Samsung Electronics S5M MFD series. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device config MFD_WM8400 - tristate "Support Wolfson Microelectronics WM8400" + bool "Support Wolfson Microelectronics WM8400" select MFD_CORE - depends on I2C + depends on I2C=y select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio @@ -472,6 +499,7 @@ config MFD_WM831X_I2C select MFD_CORE select MFD_WM831X select REGMAP_I2C + select IRQ_DOMAIN depends on I2C=y && GENERIC_HARDIRQS help Support for the Wolfson Microelecronics WM831x and WM832x PMICs @@ -484,6 +512,7 @@ config MFD_WM831X_SPI select MFD_CORE select MFD_WM831X select REGMAP_SPI + select IRQ_DOMAIN depends on SPI_MASTER && GENERIC_HARDIRQS help Support for the Wolfson Microelecronics WM831x and WM832x PMICs @@ -596,17 +625,32 @@ config MFD_MC13783 tristate config MFD_MC13XXX - tristate "Support Freescale MC13783 and MC13892" - depends on SPI_MASTER + tristate + depends on SPI_MASTER || I2C select MFD_CORE select MFD_MC13783 help - Support for the Freescale (Atlas) PMIC and audio CODECs - MC13783 and MC13892. - This driver provides common support for accessing the device, + Enable support for the Freescale MC13783 and MC13892 PMICs. + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_MC13XXX_SPI + tristate "Freescale MC13783 and MC13892 SPI interface" + depends on SPI_MASTER + select REGMAP_SPI + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an SPI bus. + +config MFD_MC13XXX_I2C + tristate "Freescale MC13892 I2C interface" + depends on I2C + select REGMAP_I2C + select MFD_MC13XXX + help + Select this if your MC13xxx is connected via an I2C bus. + config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" default y if ARCH_U300 || ARCH_U8500 @@ -648,26 +692,9 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config AB5500_CORE - bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" - depends on ABX500_CORE && MFD_DB5500_PRCMU - select MFD_CORE - help - Select this option to enable access to AB5500 power management - chip. This connects to the db5500 chip via the I2C bus via PRCMU. - This chip embeds various other multimedia funtionalities as well. - -config AB5500_DEBUG - bool "Enable debug info via debugfs" - depends on AB5500_CORE && DEBUG_FS - default y if DEBUG_FS - help - Select this option if you want debug information from the AB5500 - using the debug filesystem, debugfs. - config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE + depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU select MFD_CORE help Select this option to enable access to AB8500 power management @@ -711,16 +738,6 @@ config MFD_DB8500_PRCMU system controller running an XP70 microprocessor, which is accessed through a register map. -config MFD_DB5500_PRCMU - bool "ST-Ericsson DB5500 Power Reset Control Management Unit" - depends on UX500_SOC_DB5500 - select MFD_CORE - help - Select this option to enable support for the DB5500 Power Reset - and Control Management Unit. This is basically an autonomous - system controller running an XP70 microprocessor, which is accessed - through a register map. - config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE @@ -748,6 +765,16 @@ config LPC_SCH LPC bridge function of the Intel SCH provides support for System Management Bus and General Purpose I/O. +config LPC_ICH + tristate "Intel ICH LPC" + depends on PCI + select MFD_CORE + help + The LPC bridge function of the Intel ICH provides support for + many functional units. This driver provides needed support for + other drivers to control these functions, currently GPIO and + watchdog. + config MFD_RDC321X tristate "Support for RDC-R321x southbridge" select MFD_CORE @@ -880,6 +907,11 @@ config MFD_RC5T583 Additional drivers must be enabled in order to use the different functionality of the device. +config MFD_STA2X11 + bool "STA2X11 multi function device support" + depends on STA2X11 + select MFD_CORE + config MFD_ANATOP bool "Support for Freescale i.MX on-chip ANATOP controller" depends on SOC_IMX6Q @@ -888,6 +920,16 @@ config MFD_ANATOP MFD controller. This controller embeds regulator and thermal devices for Freescale i.MX platforms. +config MFD_PALMAS + bool "Support for the TI Palmas series chips" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say yes here you get support for the Palmas + series of PMIC chips from Texas Instruments. + endmenu endif |