diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r-- | drivers/message/fusion/mptbase.c | 449 |
1 files changed, 282 insertions, 167 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 14d62d96ca41..790a2932ded9 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -135,7 +135,6 @@ static void mpt_adapter_dispose(MPT_ADAPTER *ioc); static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); -//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); @@ -178,6 +177,7 @@ static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t * static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info); +static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info); /* module entry point */ static int __init fusion_init (void); @@ -209,6 +209,144 @@ pci_enable_io_access(struct pci_dev *pdev) pci_write_config_word(pdev, PCI_COMMAND, command_reg); } +/* + * Process turbo (context) reply... + */ +static void +mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) +{ + MPT_FRAME_HDR *mf = NULL; + MPT_FRAME_HDR *mr = NULL; + int req_idx = 0; + int cb_idx; + + dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", + ioc->name, pa)); + + switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { + case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: + req_idx = pa & 0x0000FFFF; + cb_idx = (pa & 0x00FF0000) >> 16; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + break; + case MPI_CONTEXT_REPLY_TYPE_LAN: + cb_idx = mpt_lan_index; + /* + * Blind set of mf to NULL here was fatal + * after lan_reply says "freeme" + * Fix sort of combined with an optimization here; + * added explicit check for case where lan_reply + * was just returning 1 and doing nothing else. + * For this case skip the callback, but set up + * proper mf value first here:-) + */ + if ((pa & 0x58000000) == 0x58000000) { + req_idx = pa & 0x0000FFFF; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + mpt_free_msg_frame(ioc, mf); + mb(); + return; + break; + } + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + break; + case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: + cb_idx = mpt_stm_index; + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + break; + default: + cb_idx = 0; + BUG(); + } + + /* Check for (valid) IO callback! */ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || + MptCallbacks[cb_idx] == NULL) { + printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", + __FUNCTION__, ioc->name, cb_idx); + goto out; + } + + if (MptCallbacks[cb_idx](ioc, mf, mr)) + mpt_free_msg_frame(ioc, mf); + out: + mb(); +} + +static void +mpt_reply(MPT_ADAPTER *ioc, u32 pa) +{ + MPT_FRAME_HDR *mf; + MPT_FRAME_HDR *mr; + int req_idx; + int cb_idx; + int freeme; + + u32 reply_dma_low; + u16 ioc_stat; + + /* non-TURBO reply! Hmmm, something may be up... + * Newest turbo reply mechanism; get address + * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! + */ + + /* Map DMA address of reply header to cpu address. + * pa is 32 bits - but the dma address may be 32 or 64 bits + * get offset based only only the low addresses + */ + + reply_dma_low = (pa <<= 1); + mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + + (reply_dma_low - ioc->reply_frames_low_dma)); + + req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); + cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + + dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", + ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); + DBG_DUMP_REPLY_FRAME(mr) + + /* Check/log IOC log info + */ + ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); + if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { + u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); + if (ioc->bus_type == FC) + mpt_fc_log_info(ioc, log_info); + else if (ioc->bus_type == SCSI) + mpt_sp_log_info(ioc, log_info); + else if (ioc->bus_type == SAS) + mpt_sas_log_info(ioc, log_info); + } + if (ioc_stat & MPI_IOCSTATUS_MASK) { + if (ioc->bus_type == SCSI && + cb_idx != mpt_stm_index && + cb_idx != mpt_lan_index) + mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); + } + + + /* Check for (valid) IO callback! */ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || + MptCallbacks[cb_idx] == NULL) { + printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", + __FUNCTION__, ioc->name, cb_idx); + freeme = 0; + goto out; + } + + freeme = MptCallbacks[cb_idx](ioc, mf, mr); + + out: + /* Flush (non-TURBO) reply with a WRITE! */ + CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); + + if (freeme) + mpt_free_msg_frame(ioc, mf); + mb(); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. @@ -230,164 +368,21 @@ pci_enable_io_access(struct pci_dev *pdev) static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) { - MPT_ADAPTER *ioc; - MPT_FRAME_HDR *mf; - MPT_FRAME_HDR *mr; - u32 pa; - int req_idx; - int cb_idx; - int type; - int freeme; - - ioc = (MPT_ADAPTER *)bus_id; + MPT_ADAPTER *ioc = bus_id; + u32 pa; /* * Drain the reply FIFO! - * - * NOTES: I've seen up to 10 replies processed in this loop, so far... - * Update: I've seen up to 9182 replies processed in this loop! ?? - * Update: Limit ourselves to processing max of N replies - * (bottom of loop). */ while (1) { - - if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF) + pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); + if (pa == 0xFFFFFFFF) return IRQ_HANDLED; - - cb_idx = 0; - freeme = 0; - - /* - * Check for non-TURBO reply! - */ - if (pa & MPI_ADDRESS_REPLY_A_BIT) { - u32 reply_dma_low; - u16 ioc_stat; - - /* non-TURBO reply! Hmmm, something may be up... - * Newest turbo reply mechanism; get address - * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! - */ - - /* Map DMA address of reply header to cpu address. - * pa is 32 bits - but the dma address may be 32 or 64 bits - * get offset based only only the low addresses - */ - reply_dma_low = (pa = (pa << 1)); - mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + - (reply_dma_low - ioc->reply_frames_low_dma)); - - req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); - cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - - dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", - ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); - DBG_DUMP_REPLY_FRAME(mr) - - /* Check/log IOC log info - */ - ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); - if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { - u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); - if (ioc->bus_type == FC) - mpt_fc_log_info(ioc, log_info); - else if (ioc->bus_type == SCSI) - mpt_sp_log_info(ioc, log_info); - } - if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SCSI) - mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); - } - } else { - /* - * Process turbo (context) reply... - */ - dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa)); - type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT); - if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) { - cb_idx = mpt_stm_index; - mf = NULL; - mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); - } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) { - cb_idx = mpt_lan_index; - /* Blind set of mf to NULL here was fatal - * after lan_reply says "freeme" - * Fix sort of combined with an optimization here; - * added explicit check for case where lan_reply - * was just returning 1 and doing nothing else. - * For this case skip the callback, but set up - * proper mf value first here:-) - */ - if ((pa & 0x58000000) == 0x58000000) { - req_idx = pa & 0x0000FFFF; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - freeme = 1; - /* - * IMPORTANT! Invalidate the callback! - */ - cb_idx = 0; - } else { - mf = NULL; - } - mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); - } else { - req_idx = pa & 0x0000FFFF; - cb_idx = (pa & 0x00FF0000) >> 16; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - mr = NULL; - } - pa = 0; /* No reply flush! */ - } - -#ifdef MPT_DEBUG_IRQ - if (ioc->bus_type == SCSI) { - /* Verify mf, mr are reasonable. - */ - if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth)) - || (mf < ioc->req_frames)) ) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf); - cb_idx = 0; - pa = 0; - freeme = 0; - } - if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth)) - || (mr < ioc->reply_frames)) ) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr); - cb_idx = 0; - pa = 0; - freeme = 0; - } - if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx); - cb_idx = 0; - pa = 0; - freeme = 0; - } - } -#endif - - /* Check for (valid) IO callback! */ - if (cb_idx) { - /* Do the callback! */ - freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr); - } - - if (pa) { - /* Flush (non-TURBO) reply with a WRITE! */ - CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); - } - - if (freeme) { - /* Put Request back on FreeQ! */ - mpt_free_msg_frame(ioc, mf); - } - - mb(); - } /* drain reply FIFO */ + else if (pa & MPI_ADDRESS_REPLY_A_BIT) + mpt_reply(ioc, pa); + else + mpt_turbo_reply(ioc, pa); + } return IRQ_HANDLED; } @@ -1065,7 +1060,7 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_dma, - hst_page_buffer_sz)); + host_page_buffer_sz)); ioc->alloc_total += host_page_buffer_sz; ioc->HostPageBuffer_sz = host_page_buffer_sz; break; @@ -1208,7 +1203,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* Initilize SCSI Config Data structure */ - memset(&ioc->spi_data, 0, sizeof(ScsiCfgData)); + memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); /* Initialize the running configQ head. */ @@ -1755,8 +1750,23 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) */ if (ret == 0) { rc = mpt_do_upload(ioc, sleepFlag); - if (rc != 0) + if (rc == 0) { + if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { + /* + * Maintain only one pointer to FW memory + * so there will not be two attempt to + * downloadboot onboard dual function + * chips (mpt_adapter_disable, + * mpt_diag_reset) + */ + ioc->cached_fw = NULL; + ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload: alt_%s has cached_fw=%p \n", + ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); + } + } else { printk(KERN_WARNING MYNAM ": firmware upload failure!\n"); + ret = -5; + } } } } @@ -1997,9 +2007,9 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } kfree(ioc->spi_data.nvram); - kfree(ioc->spi_data.pIocPg3); + kfree(ioc->raid_data.pIocPg3); ioc->spi_data.nvram = NULL; - ioc->spi_data.pIocPg3 = NULL; + ioc->raid_data.pIocPg3 = NULL; if (ioc->spi_data.pIocPg4 != NULL) { sz = ioc->spi_data.IocPg4Sz; @@ -3852,7 +3862,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) int count = 0; u32 intstat=0; - cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + cntdn = 1000 * howlong; if (sleepFlag == CAN_SLEEP) { while (--cntdn) { @@ -3902,7 +3912,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) int count = 0; u32 intstat=0; - cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + cntdn = 1000 * howlong; if (sleepFlag == CAN_SLEEP) { while (--cntdn) { intstat = CHIPREG_READ32(&ioc->chip->IntStatus); @@ -4634,10 +4644,10 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) if (mpt_config(ioc, &cfg) != 0) goto done_and_free; - if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) { + if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) { mem = kmalloc(iocpage2sz, GFP_ATOMIC); if (mem) { - ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem; + ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; } else { goto done_and_free; } @@ -4654,7 +4664,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) /* At least 1 RAID Volume */ pIocRv = pIoc2->RaidVolume; - ioc->spi_data.isRaid = 0; + ioc->raid_data.isRaid = 0; for (jj = 0; jj < nVols; jj++, pIocRv++) { vid = pIocRv->VolumeID; vbus = pIocRv->VolumeBus; @@ -4663,7 +4673,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) /* find the match */ if (vbus == 0) { - ioc->spi_data.isRaid |= (1 << vid); + ioc->raid_data.isRaid |= (1 << vid); } else { /* Error! Always bus 0 */ @@ -4698,8 +4708,8 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) /* Free the old page */ - kfree(ioc->spi_data.pIocPg3); - ioc->spi_data.pIocPg3 = NULL; + kfree(ioc->raid_data.pIocPg3); + ioc->raid_data.pIocPg3 = NULL; /* There is at least one physical disk. * Read and save IOC Page 3 @@ -4736,7 +4746,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) mem = kmalloc(iocpage3sz, GFP_ATOMIC); if (mem) { memcpy(mem, (u8 *)pIoc3, iocpage3sz); - ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem; + ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; } } @@ -6022,6 +6032,111 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info) printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); } +/* strings for sas loginfo */ + static char *originator_str[] = { + "IOP", /* 00h */ + "PL", /* 01h */ + "IR" /* 02h */ + }; + static char *iop_code_str[] = { + NULL, /* 00h */ + "Invalid SAS Address", /* 01h */ + NULL, /* 02h */ + "Invalid Page", /* 03h */ + NULL, /* 04h */ + "Task Terminated" /* 05h */ + }; + static char *pl_code_str[] = { + NULL, /* 00h */ + "Open Failure", /* 01h */ + "Invalid Scatter Gather List", /* 02h */ + "Wrong Relative Offset or Frame Length", /* 03h */ + "Frame Transfer Error", /* 04h */ + "Transmit Frame Connected Low", /* 05h */ + "SATA Non-NCQ RW Error Bit Set", /* 06h */ + "SATA Read Log Receive Data Error", /* 07h */ + "SATA NCQ Fail All Commands After Error", /* 08h */ + "SATA Error in Receive Set Device Bit FIS", /* 09h */ + "Receive Frame Invalid Message", /* 0Ah */ + "Receive Context Message Valid Error", /* 0Bh */ + "Receive Frame Current Frame Error", /* 0Ch */ + "SATA Link Down", /* 0Dh */ + "Discovery SATA Init W IOS", /* 0Eh */ + "Config Invalid Page", /* 0Fh */ + "Discovery SATA Init Timeout", /* 10h */ + "Reset", /* 11h */ + "Abort", /* 12h */ + "IO Not Yet Executed", /* 13h */ + "IO Executed", /* 14h */ + NULL, /* 15h */ + NULL, /* 16h */ + NULL, /* 17h */ + NULL, /* 18h */ + NULL, /* 19h */ + NULL, /* 1Ah */ + NULL, /* 1Bh */ + NULL, /* 1Ch */ + NULL, /* 1Dh */ + NULL, /* 1Eh */ + NULL, /* 1Fh */ + "Enclosure Management" /* 20h */ + }; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_sas_log_info - Log information returned from SAS IOC. + * @ioc: Pointer to MPT_ADAPTER structure + * @log_info: U32 LogInfo reply word from the IOC + * + * Refer to lsi/mpi_log_sas.h. + */ +static void +mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info) +{ +union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + }dw; +}; + union loginfo_type sas_loginfo; + char *code_desc = NULL; + + sas_loginfo.loginfo = log_info; + if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && + (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*))) + return; + if ((sas_loginfo.dw.originator == 0 /*IOP*/) && + (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) { + code_desc = iop_code_str[sas_loginfo.dw.code]; + }else if ((sas_loginfo.dw.originator == 1 /*PL*/) && + (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) { + code_desc = pl_code_str[sas_loginfo.dw.code]; + } + + if (code_desc != NULL) + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code={%s}," + " SubCode(0x%04x)\n", + ioc->name, + log_info, + originator_str[sas_loginfo.dw.originator], + code_desc, + sas_loginfo.dw.subcode); + else + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," + " SubCode(0x%04x)\n", + ioc->name, + log_info, + originator_str[sas_loginfo.dw.originator], + sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. |