diff options
Diffstat (limited to 'drivers/memory')
| -rw-r--r-- | drivers/memory/emif.h | 4 | ||||
| -rw-r--r-- | drivers/memory/ti-emif-pm.c | 3 | ||||
| -rw-r--r-- | drivers/memory/ti-emif-sram-pm.S | 41 |
3 files changed, 48 insertions, 0 deletions
diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h index 9e9f8037955d..6b71fadb3cfa 100644 --- a/drivers/memory/emif.h +++ b/drivers/memory/emif.h @@ -537,6 +537,9 @@ #define MCONNID_SHIFT 0 #define MCONNID_MASK (0xff << 0) +/* READ_WRITE_LEVELING_CONTROL */ +#define RDWRLVLFULL_START 0x80000000 + /* DDR_PHY_CTRL_1 - EMIF4D */ #define DLL_SLAVE_DLY_CTRL_SHIFT_4D 4 #define DLL_SLAVE_DLY_CTRL_MASK_4D (0xFF << 4) @@ -598,6 +601,7 @@ extern struct emif_regs_amx3 ti_emif_regs_amx3; void ti_emif_save_context(void); void ti_emif_restore_context(void); +void ti_emif_run_hw_leveling(void); void ti_emif_enter_sr(void); void ti_emif_exit_sr(void); void ti_emif_abort_sr(void); diff --git a/drivers/memory/ti-emif-pm.c b/drivers/memory/ti-emif-pm.c index 2250d03ea17f..ab07aa163138 100644 --- a/drivers/memory/ti-emif-pm.c +++ b/drivers/memory/ti-emif-pm.c @@ -138,6 +138,9 @@ static int ti_emif_alloc_sram(struct device *dev, emif_data->pm_functions.exit_sr = sram_resume_address(emif_data, (unsigned long)ti_emif_exit_sr); + emif_data->pm_functions.run_hw_leveling = + sram_resume_address(emif_data, + (unsigned long)ti_emif_run_hw_leveling); emif_data->pm_data.regs_virt = (struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt; diff --git a/drivers/memory/ti-emif-sram-pm.S b/drivers/memory/ti-emif-sram-pm.S index a5369181e5c2..d75ae18efa7d 100644 --- a/drivers/memory/ti-emif-sram-pm.S +++ b/drivers/memory/ti-emif-sram-pm.S @@ -27,6 +27,7 @@ #define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK 0x0700 #define EMIF_SDCFG_TYPE_DDR2 0x2 << SDRAM_TYPE_SHIFT +#define EMIF_SDCFG_TYPE_DDR3 0x3 << SDRAM_TYPE_SHIFT #define EMIF_STATUS_READY 0x4 #define AM43XX_EMIF_PHY_CTRL_REG_COUNT 0x120 @@ -245,6 +246,46 @@ emif_skip_restore_extra_regs: ENDPROC(ti_emif_restore_context) /* + * void ti_emif_run_hw_leveling(void) + * + * Used during resume to run hardware leveling again and restore the + * configuration of the EMIF PHY, only for DDR3. + */ +ENTRY(ti_emif_run_hw_leveling) + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET] + + ldr r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + orr r3, r3, #RDWRLVLFULL_START + ldr r2, [r0, #EMIF_SDRAM_CONFIG] + and r2, r2, #SDRAM_TYPE_MASK + cmp r2, #EMIF_SDCFG_TYPE_DDR3 + bne skip_hwlvl + + str r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + + /* + * If EMIF registers are touched during initial stage of HW + * leveling sequence there will be an L3 NOC timeout error issued + * as the EMIF will not respond, which is not fatal, but it is + * avoidable. This small wait loop is enough time for this condition + * to clear, even at worst case of CPU running at max speed of 1Ghz. + */ + mov r2, #0x2000 +1: + subs r2, r2, #0x1 + bne 1b + + /* Bit clears when operation is complete */ +2: ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + tst r1, #RDWRLVLFULL_START + bne 2b + +skip_hwlvl: + mov pc, lr +ENDPROC(ti_emif_run_hw_leveling) + +/* * void ti_emif_enter_sr(void) * * Programs the EMIF to tell the SDRAM to enter into self-refresh |