diff options
Diffstat (limited to 'drivers/media/video/ovcamchip/ov6x20.c')
| -rw-r--r-- | drivers/media/video/ovcamchip/ov6x20.c | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c new file mode 100644 index 000000000000..3433619ad93f --- /dev/null +++ b/drivers/media/video/ovcamchip/ov6x20.c @@ -0,0 +1,415 @@ +/* OmniVision OV6620/OV6120 Camera Chip Support Code + * + * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> + * http://alpha.dyndns.org/ov511/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. + */ + +#define DEBUG + +#include <linux/slab.h> +#include "ovcamchip_priv.h" + +/* Registers */ +#define REG_GAIN 0x00 /* gain [5:0] */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_SAT 0x03 /* saturation */ +#define REG_CNT 0x05 /* Y contrast */ +#define REG_BRT 0x06 /* Y brightness */ +#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */ +#define REG_WB_RED 0x0D /* WB red ratio [5:0] */ +#define REG_EXP 0x10 /* exposure */ + +/* Window parameters */ +#define HWSBASE 0x38 +#define HWEBASE 0x3A +#define VWSBASE 0x05 +#define VWEBASE 0x06 + +struct ov6x20 { + int auto_brt; + int auto_exp; + int backlight; + int bandfilt; + int mirror; +}; + +/* Initial values for use with OV511/OV511+ cameras */ +static struct ovcamchip_regvals regvals_init_6x20_511[] = { + { 0x12, 0x80 }, /* reset */ + { 0x11, 0x01 }, + { 0x03, 0x60 }, + { 0x05, 0x7f }, /* For when autoadjust is off */ + { 0x07, 0xa8 }, + { 0x0c, 0x24 }, + { 0x0d, 0x24 }, + { 0x0f, 0x15 }, /* COMS */ + { 0x10, 0x75 }, /* AEC Exposure time */ + { 0x12, 0x24 }, /* Enable AGC and AWB */ + { 0x14, 0x04 }, + { 0x16, 0x03 }, + { 0x26, 0xb2 }, /* BLC enable */ + /* 0x28: 0x05 Selects RGB format if RGB on */ + { 0x28, 0x05 }, + { 0x2a, 0x04 }, /* Disable framerate adjust */ + { 0x2d, 0x99 }, + { 0x33, 0xa0 }, /* Color Processing Parameter */ + { 0x34, 0xd2 }, /* Max A/D range */ + { 0x38, 0x8b }, + { 0x39, 0x40 }, + + { 0x3c, 0x39 }, /* Enable AEC mode changing */ + { 0x3c, 0x3c }, /* Change AEC mode */ + { 0x3c, 0x24 }, /* Disable AEC mode changing */ + + { 0x3d, 0x80 }, + /* These next two registers (0x4a, 0x4b) are undocumented. They + * control the color balance */ + { 0x4a, 0x80 }, + { 0x4b, 0x80 }, + { 0x4d, 0xd2 }, /* This reduces noise a bit */ + { 0x4e, 0xc1 }, + { 0x4f, 0x04 }, + { 0xff, 0xff }, /* END MARKER */ +}; + +/* Initial values for use with OV518 cameras */ +static struct ovcamchip_regvals regvals_init_6x20_518[] = { + { 0x12, 0x80 }, /* Do a reset */ + { 0x03, 0xc0 }, /* Saturation */ + { 0x05, 0x8a }, /* Contrast */ + { 0x0c, 0x24 }, /* AWB blue */ + { 0x0d, 0x24 }, /* AWB red */ + { 0x0e, 0x8d }, /* Additional 2x gain */ + { 0x0f, 0x25 }, /* Black expanding level = 1.3V */ + { 0x11, 0x01 }, /* Clock div. */ + { 0x12, 0x24 }, /* Enable AGC and AWB */ + { 0x13, 0x01 }, /* (default) */ + { 0x14, 0x80 }, /* Set reserved bit 7 */ + { 0x15, 0x01 }, /* (default) */ + { 0x16, 0x03 }, /* (default) */ + { 0x17, 0x38 }, /* (default) */ + { 0x18, 0xea }, /* (default) */ + { 0x19, 0x04 }, + { 0x1a, 0x93 }, + { 0x1b, 0x00 }, /* (default) */ + { 0x1e, 0xc4 }, /* (default) */ + { 0x1f, 0x04 }, /* (default) */ + { 0x20, 0x20 }, /* Enable 1st stage aperture correction */ + { 0x21, 0x10 }, /* Y offset */ + { 0x22, 0x88 }, /* U offset */ + { 0x23, 0xc0 }, /* Set XTAL power level */ + { 0x24, 0x53 }, /* AEC bright ratio */ + { 0x25, 0x7a }, /* AEC black ratio */ + { 0x26, 0xb2 }, /* BLC enable */ + { 0x27, 0xa2 }, /* Full output range */ + { 0x28, 0x01 }, /* (default) */ + { 0x29, 0x00 }, /* (default) */ + { 0x2a, 0x84 }, /* (default) */ + { 0x2b, 0xa8 }, /* Set custom frame rate */ + { 0x2c, 0xa0 }, /* (reserved) */ + { 0x2d, 0x95 }, /* Enable banding filter */ + { 0x2e, 0x88 }, /* V offset */ + { 0x33, 0x22 }, /* Luminance gamma on */ + { 0x34, 0xc7 }, /* A/D bias */ + { 0x36, 0x12 }, /* (reserved) */ + { 0x37, 0x63 }, /* (reserved) */ + { 0x38, 0x8b }, /* Quick AEC/AEB */ + { 0x39, 0x00 }, /* (default) */ + { 0x3a, 0x0f }, /* (default) */ + { 0x3b, 0x3c }, /* (default) */ + { 0x3c, 0x5c }, /* AEC controls */ + { 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */ + { 0x3e, 0x80 }, /* (default) */ + { 0x3f, 0x02 }, /* (default) */ + { 0x40, 0x10 }, /* (reserved) */ + { 0x41, 0x10 }, /* (reserved) */ + { 0x42, 0x00 }, /* (reserved) */ + { 0x43, 0x7f }, /* (reserved) */ + { 0x44, 0x80 }, /* (reserved) */ + { 0x45, 0x1c }, /* (reserved) */ + { 0x46, 0x1c }, /* (reserved) */ + { 0x47, 0x80 }, /* (reserved) */ + { 0x48, 0x5f }, /* (reserved) */ + { 0x49, 0x00 }, /* (reserved) */ + { 0x4a, 0x00 }, /* Color balance (undocumented) */ + { 0x4b, 0x80 }, /* Color balance (undocumented) */ + { 0x4c, 0x58 }, /* (reserved) */ + { 0x4d, 0xd2 }, /* U *= .938, V *= .838 */ + { 0x4e, 0xa0 }, /* (default) */ + { 0x4f, 0x04 }, /* UV 3-point average */ + { 0x50, 0xff }, /* (reserved) */ + { 0x51, 0x58 }, /* (reserved) */ + { 0x52, 0xc0 }, /* (reserved) */ + { 0x53, 0x42 }, /* (reserved) */ + { 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */ + { 0x12, 0x20 }, + { 0x12, 0x24 }, + + { 0xff, 0xff }, /* END MARKER */ +}; + +/* This initializes the OV6x20 camera chip and relevant variables. */ +static int ov6x20_init(struct i2c_client *c) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov6x20 *s; + int rc; + + DDEBUG(4, &c->dev, "entered"); + + switch (c->adapter->id) { + case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511: + rc = ov_write_regvals(c, regvals_init_6x20_511); + break; + case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518: + rc = ov_write_regvals(c, regvals_init_6x20_518); + break; + default: + dev_err(&c->dev, "ov6x20: Unsupported adapter\n"); + rc = -ENODEV; + } + + if (rc < 0) + return rc; + + ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL); + if (!s) + return -ENOMEM; + memset(s, 0, sizeof *s); + + s->auto_brt = 1; + s->auto_exp = 1; + + return rc; +} + +static int ov6x20_free(struct i2c_client *c) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + + kfree(ov->spriv); + return 0; +} + +static int ov6x20_set_control(struct i2c_client *c, + struct ovcamchip_control *ctl) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov6x20 *s = ov->spriv; + int rc; + int v = ctl->value; + + switch (ctl->id) { + case OVCAMCHIP_CID_CONT: + rc = ov_write(c, REG_CNT, v >> 8); + break; + case OVCAMCHIP_CID_BRIGHT: + rc = ov_write(c, REG_BRT, v >> 8); + break; + case OVCAMCHIP_CID_SAT: + rc = ov_write(c, REG_SAT, v >> 8); + break; + case OVCAMCHIP_CID_HUE: + rc = ov_write(c, REG_RED, 0xFF - (v >> 8)); + if (rc < 0) + goto out; + + rc = ov_write(c, REG_BLUE, v >> 8); + break; + case OVCAMCHIP_CID_EXP: + rc = ov_write(c, REG_EXP, v); + break; + case OVCAMCHIP_CID_FREQ: + { + int sixty = (v == 60); + + rc = ov_write(c, 0x2b, sixty?0xa8:0x28); + if (rc < 0) + goto out; + + rc = ov_write(c, 0x2a, sixty?0x84:0xa4); + break; + } + case OVCAMCHIP_CID_BANDFILT: + rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); + s->bandfilt = v; + break; + case OVCAMCHIP_CID_AUTOBRIGHT: + rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); + s->auto_brt = v; + break; + case OVCAMCHIP_CID_AUTOEXP: + rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); + s->auto_exp = v; + break; + case OVCAMCHIP_CID_BACKLIGHT: + { + rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0); + if (rc < 0) + goto out; + + rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); + if (rc < 0) + goto out; + + rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80); + s->backlight = v; + break; + } + case OVCAMCHIP_CID_MIRROR: + rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); + s->mirror = v; + break; + default: + DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); + return -EPERM; + } + +out: + DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); + return rc; +} + +static int ov6x20_get_control(struct i2c_client *c, + struct ovcamchip_control *ctl) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov6x20 *s = ov->spriv; + int rc = 0; + unsigned char val = 0; + + switch (ctl->id) { + case OVCAMCHIP_CID_CONT: + rc = ov_read(c, REG_CNT, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_BRIGHT: + rc = ov_read(c, REG_BRT, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_SAT: + rc = ov_read(c, REG_SAT, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_HUE: + rc = ov_read(c, REG_BLUE, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_EXP: + rc = ov_read(c, REG_EXP, &val); + ctl->value = val; + break; + case OVCAMCHIP_CID_BANDFILT: + ctl->value = s->bandfilt; + break; + case OVCAMCHIP_CID_AUTOBRIGHT: + ctl->value = s->auto_brt; + break; + case OVCAMCHIP_CID_AUTOEXP: + ctl->value = s->auto_exp; + break; + case OVCAMCHIP_CID_BACKLIGHT: + ctl->value = s->backlight; + break; + case OVCAMCHIP_CID_MIRROR: + ctl->value = s->mirror; + break; + default: + DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); + return -EPERM; + } + + DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); + return rc; +} + +static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) +{ + /******** QCIF-specific regs ********/ + + ov_write(c, 0x14, win->quarter?0x24:0x04); + + /******** Palette-specific regs ********/ + + /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */ + if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) { + if (win->format == VIDEO_PALETTE_GREY) + ov_write_mask(c, 0x13, 0x00, 0x20); + else + ov_write_mask(c, 0x13, 0x20, 0x20); + } else { + if (win->format == VIDEO_PALETTE_GREY) + ov_write_mask(c, 0x13, 0x20, 0x20); + else + ov_write_mask(c, 0x13, 0x00, 0x20); + } + + /******** Clock programming ********/ + + /* The OV6620 needs special handling. This prevents the + * severe banding that normally occurs */ + + /* Clock down */ + ov_write(c, 0x2a, 0x04); + + ov_write(c, 0x11, win->clockdiv); + + ov_write(c, 0x2a, 0x84); + /* This next setting is critical. It seems to improve + * the gain or the contrast. The "reserved" bits seem + * to have some effect in this case. */ + ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */ + + return 0; +} + +static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) +{ + int ret, hwscale, vwscale; + + ret = ov6x20_mode_init(c, win); + if (ret < 0) + return ret; + + if (win->quarter) { + hwscale = 0; + vwscale = 0; + } else { + hwscale = 1; + vwscale = 1; /* The datasheet says 0; it's wrong */ + } + + ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); + ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); + ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); + ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); + + return 0; +} + +static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg) +{ + switch (cmd) { + case OVCAMCHIP_CMD_S_CTRL: + return ov6x20_set_control(c, arg); + case OVCAMCHIP_CMD_G_CTRL: + return ov6x20_get_control(c, arg); + case OVCAMCHIP_CMD_S_MODE: + return ov6x20_set_window(c, arg); + default: + DDEBUG(2, &c->dev, "command not supported: %d", cmd); + return -ENOIOCTLCMD; + } +} + +struct ovcamchip_ops ov6x20_ops = { + .init = ov6x20_init, + .free = ov6x20_free, + .command = ov6x20_command, +}; |