diff options
Diffstat (limited to 'drivers/media/video/cx18/cx18-dvb.c')
| -rw-r--r-- | drivers/media/video/cx18/cx18-dvb.c | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index f0381d62518d..f41922bd4020 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -29,6 +29,8 @@ #include "cx18-gpio.h" #include "s5h1409.h" #include "mxl5005s.h" +#include "s5h1411.h" +#include "tda18271.h" #include "zl10353.h" #include <linux/firmware.h> @@ -77,6 +79,32 @@ static struct s5h1409_config hauppauge_hvr1600_config = { }; /* + * CX18_CARD_HVR_1600_S5H1411 + */ +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +/* * CX18_CARD_LEADTEK_DVR3100H */ /* Information/confirmation of proper config values provided by Terry Wu */ @@ -244,6 +272,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) switch (cx->card->type) { case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: + case CX18_CARD_HVR_1600_S5H1411: v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL); v |= 0x00400000; /* Serial Mode */ v |= 0x00002000; /* Data Length - Byte */ @@ -455,6 +484,15 @@ static int dvb_register(struct cx18_stream *stream) ret = 0; } break; + case CX18_CARD_HVR_1600_S5H1411: + dvb->fe = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &cx->i2c_adap[0]); + if (dvb->fe != NULL) + dvb_attach(tda18271_attach, dvb->fe, + 0x60, &cx->i2c_adap[0], + &hauppauge_tda18271_config); + break; case CX18_CARD_LEADTEK_DVR3100H: dvb->fe = dvb_attach(zl10353_attach, &leadtek_dvr3100h_demod, |