summaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18/cx18-driver.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/cx18/cx18-driver.h')
-rw-r--r--drivers/media/video/cx18/cx18-driver.h71
1 files changed, 23 insertions, 48 deletions
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 4801bc7fb5b2..fa8be0731a3f 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -38,7 +38,6 @@
#include <linux/i2c-algo-bit.h>
#include <linux/list.h>
#include <linux/unistd.h>
-#include <linux/byteorder/swab.h>
#include <linux/pagemap.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
@@ -64,6 +63,9 @@
# error "This driver requires kernel PCI support."
#endif
+/* Default delay to throttle mmio access to the CX23418 */
+#define CX18_DEFAULT_MMIO_NDELAY 0 /* 0 ns = 0 PCI clock(s) / 33 MHz */
+
#define CX18_MEM_OFFSET 0x00000000
#define CX18_MEM_SIZE 0x04000000
#define CX18_REG_OFFSET 0x02000000
@@ -77,7 +79,9 @@
#define CX18_CARD_COMPRO_H900 2 /* Compro VideoMate H900 */
#define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */
#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */
-#define CX18_CARD_LAST 4
+#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
+#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
+#define CX18_CARD_LAST 6
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1
@@ -97,6 +101,8 @@
#define CX18_PCI_ID_COMPRO 0x185b
#define CX18_PCI_ID_YUAN 0x12ab
#define CX18_PCI_ID_CONEXANT 0x14f1
+#define CX18_PCI_ID_TOSHIBA 0x1179
+#define CX18_PCI_ID_LEADTEK 0x107D
/* ======================================================================== */
/* ========================== START USER SETTABLE DMA VARIABLES =========== */
@@ -169,6 +175,7 @@
#define CX18_MAX_PGM_INDEX (400)
+extern int cx18_retry_mmio; /* enable check & retry of mmio accesses */
extern int cx18_debug;
@@ -177,6 +184,7 @@ struct cx18_options {
int cardtype; /* force card type on load */
int tuner; /* set tuner on load */
int radio; /* enable/disable radio */
+ unsigned long mmio_ndelay; /* delay in ns after every PCI mmio access */
};
/* per-buffer bit flags */
@@ -216,8 +224,7 @@ struct cx18_buffer {
struct cx18_queue {
struct list_head list;
- u32 buffers;
- u32 length;
+ atomic_t buffers;
u32 bytesused;
};
@@ -237,6 +244,8 @@ struct cx18_dvb {
struct cx18; /* forward reference */
struct cx18_scb; /* forward reference */
+#define CX18_INVALID_TASK_HANDLE 0xffffffff
+
struct cx18_stream {
/* These first four fields are always set, even if the stream
is not actually created. */
@@ -259,7 +268,6 @@ struct cx18_stream {
/* Buffer Stats */
u32 buffers;
u32 buf_size;
- u32 buffers_stolen;
/* Buffer Queues */
struct cx18_queue q_free; /* free buffers */
@@ -341,6 +349,13 @@ struct cx18_i2c_algo_callback_data {
int bus_index; /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */
};
+#define CX18_MAX_MMIO_RETRIES 10
+
+struct cx18_mmio_stats {
+ atomic_t retried_write[CX18_MAX_MMIO_RETRIES+1];
+ atomic_t retried_read[CX18_MAX_MMIO_RETRIES+1];
+};
+
/* Struct to hold info about cx18 cards */
struct cx18 {
int num; /* board number, -1 during init! */
@@ -430,6 +445,9 @@ struct cx18 {
u32 gpio_val;
struct mutex gpio_lock;
+ /* Statistics */
+ struct cx18_mmio_stats mmio_stats;
+
/* v4l2 and User settings */
/* codec settings */
@@ -458,47 +476,4 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv);
/* First-open initialization: load firmware, etc. */
int cx18_init_on_first_open(struct cx18 *cx);
-/* This is a PCI post thing, where if the pci register is not read, then
- the write doesn't always take effect right away. By reading back the
- register any pending PCI writes will be performed (in order), and so
- you can be sure that the writes are guaranteed to be done.
-
- Rarely needed, only in some timing sensitive cases.
- Apparently if this is not done some motherboards seem
- to kill the firmware and get into the broken state until computer is
- rebooted. */
-#define write_sync(val, reg) \
- do { writel(val, reg); readl(reg); } while (0)
-
-#define read_reg(reg) readl(cx->reg_mem + (reg))
-#define write_reg(val, reg) writel(val, cx->reg_mem + (reg))
-#define write_reg_sync(val, reg) \
- do { write_reg(val, reg); read_reg(reg); } while (0)
-
-#define read_enc(addr) readl(cx->enc_mem + (u32)(addr))
-#define write_enc(val, addr) writel(val, cx->enc_mem + (u32)(addr))
-#define write_enc_sync(val, addr) \
- do { write_enc(val, addr); read_enc(addr); } while (0)
-
-#define sw1_irq_enable(val) do { \
- write_reg(val, SW1_INT_STATUS); \
- write_reg(read_reg(SW1_INT_ENABLE_PCI) | (val), SW1_INT_ENABLE_PCI); \
-} while (0)
-
-#define sw1_irq_disable(val) \
- write_reg(read_reg(SW1_INT_ENABLE_PCI) & ~(val), SW1_INT_ENABLE_PCI);
-
-#define sw2_irq_enable(val) do { \
- write_reg(val, SW2_INT_STATUS); \
- write_reg(read_reg(SW2_INT_ENABLE_PCI) | (val), SW2_INT_ENABLE_PCI); \
-} while (0)
-
-#define sw2_irq_disable(val) \
- write_reg(read_reg(SW2_INT_ENABLE_PCI) & ~(val), SW2_INT_ENABLE_PCI);
-
-#define setup_page(addr) do { \
- u32 val = read_reg(0xD000F8) & ~0x1f00; \
- write_reg(val | (((addr) >> 17) & 0x1f00), 0xD000F8); \
-} while (0)
-
#endif /* CX18_DRIVER_H */