summaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18/cx18-av-audio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/cx18/cx18-av-audio.c')
-rw-r--r--drivers/media/video/cx18/cx18-av-audio.c231
1 files changed, 169 insertions, 62 deletions
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index 0b55837880a7..a2f0ad570434 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -4,6 +4,7 @@
* Derived from cx25840-audio.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ * Copyright (C) 2008 Andy Walls <awalls@radix.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -30,98 +31,165 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
if (freq != 32000 && freq != 44100 && freq != 48000)
return -EINVAL;
- /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
- cx18_av_write(cx, 0x127, 0x50);
+ /*
+ * The PLL parameters are based on the external crystal frequency that
+ * would ideally be:
+ *
+ * NTSC Color subcarrier freq * 8 =
+ * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+ *
+ * The accidents of history and rationale that explain from where this
+ * combination of magic numbers originate can be found in:
+ *
+ * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in
+ * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80
+ *
+ * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the
+ * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83
+ *
+ * As Mike Bradley has rightly pointed out, it's not the exact crystal
+ * frequency that matters, only that all parts of the driver and
+ * firmware are using the same value (close to the ideal value).
+ *
+ * Since I have a strong suspicion that, if the firmware ever assumes a
+ * crystal value at all, it will assume 28.636360 MHz, the crystal
+ * freq used in calculations in this driver will be:
+ *
+ * xtal_freq = 28.636360 MHz
+ *
+ * an error of less than 0.13 ppm which is way, way better than any off
+ * the shelf crystal will have for accuracy anyway.
+ *
+ * Below I aim to run the PLLs' VCOs near 400 MHz to minimze error.
+ *
+ * Many thanks to Jeff Campbell and Mike Bradley for their extensive
+ * investigation, experimentation, testing, and suggested solutions of
+ * of audio/video sync problems with SVideo and CVBS captures.
+ */
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
switch (freq) {
case 32000:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x1408040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
+ */
+ cx18_av_write4(cx, 0x108, 0x200d040f);
- /* AUX_PLL_FRAC */
- /* 0x8.9504318a * 28,636,363.636 / 0x14 = 32000 * 384 */
- cx18_av_write4(cx, 0x110, 0x012a0863);
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+ /* AUX_PLL Fraction = 0x176740c */
+ /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x0176740c);
/* src3/4/6_ctl */
- /* 0x1.f77f = (4 * 15734.26) / 32000 */
+ /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */
cx18_av_write4(cx, 0x900, 0x0801f77f);
cx18_av_write4(cx, 0x904, 0x0801f77f);
cx18_av_write4(cx, 0x90c, 0x0801f77f);
- /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
- cx18_av_write(cx, 0x127, 0x54);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
+ cx18_av_write(cx, 0x127, 0x60);
/* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */
cx18_av_write4(cx, 0x12c, 0x11202fff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
* ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa10d2ef8);
+ cx18_av_write4(cx, 0x128, 0xa00d2ef8);
break;
case 44100:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x1009040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18
+ */
+ cx18_av_write4(cx, 0x108, 0x180e040f);
+
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
- /* AUX_PLL_FRAC */
- /* 0x9.7635e7 * 28,636,363.63 / 0x10 = 44100 * 384 */
- cx18_av_write4(cx, 0x110, 0x00ec6bce);
+ /* AUX_PLL Fraction = 0x062a1f2 */
+ /* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x0062a1f2);
/* src3/4/6_ctl */
- /* 0x1.6d59 = (4 * 15734.26) / 44100 */
+ /* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */
cx18_av_write4(cx, 0x900, 0x08016d59);
cx18_av_write4(cx, 0x904, 0x08016d59);
cx18_av_write4(cx, 0x90c, 0x08016d59);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */
+ cx18_av_write(cx, 0x127, 0x58);
+
/* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */
cx18_av_write4(cx, 0x12c, 0x112092ff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
* ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa11d4bf8);
+ cx18_av_write4(cx, 0x128, 0xa01d4bf8);
break;
case 48000:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x100a040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16
+ */
+ cx18_av_write4(cx, 0x108, 0x160e040f);
- /* AUX_PLL_FRAC */
- /* 0xa.4c6b6ea * 28,636,363.63 / 0x10 = 48000 * 384 */
- cx18_av_write4(cx, 0x110, 0x0098d6dd);
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+ /* AUX_PLL Fraction = 0x05227ad */
+ /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x005227ad);
/* src3/4/6_ctl */
- /* 0x1.4faa = (4 * 15734.26) / 48000 */
+ /* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */
cx18_av_write4(cx, 0x900, 0x08014faa);
cx18_av_write4(cx, 0x904, 0x08014faa);
cx18_av_write4(cx, 0x90c, 0x08014faa);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+ cx18_av_write(cx, 0x127, 0x56);
+
/* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */
cx18_av_write4(cx, 0x12c, 0x11205fff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x1193f8 = 143999.000 * 8 =
* ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa11193f8);
+ cx18_av_write4(cx, 0x128, 0xa01193f8);
break;
}
} else {
switch (freq) {
case 32000:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x1e08040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30
+ */
+ cx18_av_write4(cx, 0x108, 0x300d040f);
+
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
- /* AUX_PLL_FRAC */
- /* 0x8.9504318 * 28,636,363.63 / 0x1e = 32000 * 256 */
- cx18_av_write4(cx, 0x110, 0x012a0863);
+ /* AUX_PLL Fraction = 0x176740c */
+ /* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x0176740c);
/* src1_ctl */
/* 0x1.0000 = 32000/32000 */
@@ -133,27 +201,34 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
cx18_av_write4(cx, 0x904, 0x08020000);
cx18_av_write4(cx, 0x90c, 0x08020000);
- /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
- cx18_av_write(cx, 0x127, 0x54);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */
+ cx18_av_write(cx, 0x127, 0x70);
/* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */
cx18_av_write4(cx, 0x12c, 0x11201fff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x0d2ef8 = 107999.000 * 8 =
* ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa10d2ef8);
+ cx18_av_write4(cx, 0x128, 0xa00d2ef8);
break;
case 44100:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x1809040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24
+ */
+ cx18_av_write4(cx, 0x108, 0x240e040f);
- /* AUX_PLL_FRAC */
- /* 0x9.7635e74 * 28,636,363.63 / 0x18 = 44100 * 256 */
- cx18_av_write4(cx, 0x110, 0x00ec6bce);
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
+
+ /* AUX_PLL Fraction = 0x062a1f2 */
+ /* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x0062a1f2);
/* src1_ctl */
/* 0x1.60cd = 44100/32000 */
@@ -165,24 +240,34 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
cx18_av_write4(cx, 0x904, 0x08017385);
cx18_av_write4(cx, 0x90c, 0x08017385);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */
+ cx18_av_write(cx, 0x127, 0x64);
+
/* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */
cx18_av_write4(cx, 0x12c, 0x112061ff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x1d4bf8 = 239999.000 * 8 =
* ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa11d4bf8);
+ cx18_av_write4(cx, 0x128, 0xa01d4bf8);
break;
case 48000:
- /* VID_PLL and AUX_PLL */
- cx18_av_write4(cx, 0x108, 0x180a040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20
+ */
+ cx18_av_write4(cx, 0x108, 0x200d040f);
+
+ /* VID_PLL Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/
+ cx18_av_write4(cx, 0x10c, 0x002be2fe);
- /* AUX_PLL_FRAC */
- /* 0xa.4c6b6ea * 28,636,363.63 / 0x18 = 48000 * 256 */
- cx18_av_write4(cx, 0x110, 0x0098d6dd);
+ /* AUX_PLL Fraction = 0x176740c */
+ /* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/
+ cx18_av_write4(cx, 0x110, 0x0176740c);
/* src1_ctl */
/* 0x1.8000 = 48000/32000 */
@@ -194,15 +279,18 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
cx18_av_write4(cx, 0x904, 0x08015555);
cx18_av_write4(cx, 0x90c, 0x08015555);
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */
+ cx18_av_write(cx, 0x127, 0x60);
+
/* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */
cx18_av_write4(cx, 0x12c, 0x11203fff);
/*
- * EN_AV_LOCK = 1
+ * EN_AV_LOCK = 0
* VID_COUNT = 0x1193f8 = 143999.000 * 8 =
* ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8
*/
- cx18_av_write4(cx, 0x128, 0xa11193f8);
+ cx18_av_write4(cx, 0x128, 0xa01193f8);
break;
}
}
@@ -215,12 +303,15 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
void cx18_av_audio_set_path(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
+ u8 v;
/* stop microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0);
+ v = cx18_av_read(cx, 0x803) & ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
/* assert soft reset */
- cx18_av_and_or(cx, 0x810, ~0x1, 0x01);
+ v = cx18_av_read(cx, 0x810) | 0x01;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
/* Mute everything to prevent the PFFT! */
cx18_av_write(cx, 0x8d3, 0x1f);
@@ -240,12 +331,14 @@ void cx18_av_audio_set_path(struct cx18 *cx)
set_audclk_freq(cx, state->audclk_freq);
/* deassert soft reset */
- cx18_av_and_or(cx, 0x810, ~0x1, 0x00);
+ v = cx18_av_read(cx, 0x810) & ~0x01;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
/* When the microcontroller detects the
* audio format, it will unmute the lines */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+ v = cx18_av_read(cx, 0x803) | 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
}
}
@@ -347,19 +440,23 @@ static int get_mute(struct cx18 *cx)
static void set_mute(struct cx18 *cx, int mute)
{
struct cx18_av_state *state = &cx->av_state;
+ u8 v;
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
/* Must turn off microcontroller in order to mute sound.
* Not sure if this is the best method, but it does work.
* If the microcontroller is running, then it will undo any
* changes to the mute register. */
+ v = cx18_av_read(cx, 0x803);
if (mute) {
/* disable microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x00);
+ v &= ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
cx18_av_write(cx, 0x8d3, 0x1f);
} else {
/* enable microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+ v |= 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
}
} else {
/* SRC1_MUTE_EN */
@@ -375,16 +472,26 @@ int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg)
switch (cmd) {
case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+ {
+ u8 v;
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
- cx18_av_and_or(cx, 0x803, ~0x10, 0);
+ v = cx18_av_read(cx, 0x803) & ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
cx18_av_write(cx, 0x8d3, 0x1f);
}
- cx18_av_and_or(cx, 0x810, ~0x1, 1);
+ v = cx18_av_read(cx, 0x810) | 0x1;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+
retval = set_audclk_freq(cx, *(u32 *)arg);
- cx18_av_and_or(cx, 0x810, ~0x1, 0);
- if (state->aud_input > CX18_AV_AUDIO_SERIAL2)
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+
+ v = cx18_av_read(cx, 0x810) & ~0x1;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+ if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+ v = cx18_av_read(cx, 0x803) | 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+ }
return retval;
+ }
case VIDIOC_G_CTRL:
switch (ctrl->id) {