summaryrefslogtreecommitdiff
path: root/drivers/media/video/bt8xx/bttv-input.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/bt8xx/bttv-input.c')
-rw-r--r--drivers/media/video/bt8xx/bttv-input.c157
1 files changed, 25 insertions, 132 deletions
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index cbc012f71f52..6f74c8042bc3 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -36,13 +36,18 @@ module_param(repeat_delay, int, 0644);
static int repeat_period = 33;
module_param(repeat_period, int, 0644);
+static int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+static int ir_rc5_key_timeout = 200;
+module_param(ir_rc5_key_timeout, int, 0644);
+
#define DEVNAME "bttv-input"
/* ---------------------------------------------------------------------- */
static void ir_handle_key(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
u32 gpio,data;
/* read gpio value */
@@ -72,7 +77,7 @@ static void ir_handle_key(struct bttv *btv)
void bttv_input_irq(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
if (!ir->polling)
ir_handle_key(btv);
@@ -81,65 +86,21 @@ void bttv_input_irq(struct bttv *btv)
static void bttv_input_timer(unsigned long data)
{
struct bttv *btv = (struct bttv*)data;
- struct bttv_ir *ir = btv->remote;
- unsigned long timeout;
+ struct card_ir *ir = btv->remote;
ir_handle_key(btv);
- timeout = jiffies + (ir->polling * HZ / 1000);
- mod_timer(&ir->timer, timeout);
+ mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
/* ---------------------------------------------------------------*/
-static int rc5_remote_gap = 885;
-module_param(rc5_remote_gap, int, 0644);
-static int rc5_key_timeout = 200;
-module_param(rc5_key_timeout, int, 0644);
-
-#define RC5_START(x) (((x)>>12)&3)
-#define RC5_TOGGLE(x) (((x)>>11)&1)
-#define RC5_ADDR(x) (((x)>>6)&31)
-#define RC5_INSTR(x) ((x)&63)
-
-/* decode raw bit pattern to RC5 code */
-static u32 rc5_decode(unsigned int code)
-{
- unsigned int org_code = code;
- unsigned int pair;
- unsigned int rc5 = 0;
- int i;
-
- code = (code << 1) | 1;
- for (i = 0; i < 14; ++i) {
- pair = code & 0x3;
- code >>= 2;
-
- rc5 <<= 1;
- switch (pair) {
- case 0:
- case 2:
- break;
- case 1:
- rc5 |= 1;
- break;
- case 3:
- dprintk(KERN_WARNING "bad code: %x\n", org_code);
- return 0;
- }
- }
- dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
- "instr=%x\n", rc5, org_code, RC5_START(rc5),
- RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
- return rc5;
-}
-
static int bttv_rc5_irq(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
struct timeval tv;
u32 gpio;
u32 gap;
- unsigned long current_jiffies, timeout;
+ unsigned long current_jiffies;
/* read gpio port */
gpio = bttv_gpio_read(&btv->c);
@@ -165,8 +126,8 @@ static int bttv_rc5_irq(struct bttv *btv)
/* only if in the code (otherwise spurious IRQ or timer
late) */
if (ir->last_bit < 28) {
- ir->last_bit = (gap - rc5_remote_gap / 2) /
- rc5_remote_gap;
+ ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+ ir_rc5_remote_gap;
ir->code |= 1 << ir->last_bit;
}
/* starting new code */
@@ -176,8 +137,8 @@ static int bttv_rc5_irq(struct bttv *btv)
ir->base_time = tv;
ir->last_bit = 0;
- timeout = current_jiffies + (500 + 30 * HZ) / 1000;
- mod_timer(&ir->timer_end, timeout);
+ mod_timer(&ir->timer_end,
+ current_jiffies + msecs_to_jiffies(30));
}
/* toggle GPIO pin 4 to reset the irq */
@@ -186,96 +147,28 @@ static int bttv_rc5_irq(struct bttv *btv)
return 1;
}
-
-static void bttv_rc5_timer_end(unsigned long data)
-{
- struct bttv_ir *ir = (struct bttv_ir *)data;
- struct timeval tv;
- unsigned long current_jiffies, timeout;
- u32 gap;
-
- /* get time */
- current_jiffies = jiffies;
- do_gettimeofday(&tv);
-
- /* avoid overflow with gap >1s */
- if (tv.tv_sec - ir->base_time.tv_sec > 1) {
- gap = 200000;
- } else {
- gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
- tv.tv_usec - ir->base_time.tv_usec;
- }
-
- /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
- if (gap < 28000) {
- dprintk(KERN_WARNING "spurious timer_end\n");
- return;
- }
-
- ir->active = 0;
- if (ir->last_bit < 20) {
- /* ignore spurious codes (caused by light/other remotes) */
- dprintk(KERN_WARNING "short code: %x\n", ir->code);
- } else {
- u32 rc5 = rc5_decode(ir->code);
-
- /* two start bits? */
- if (RC5_START(rc5) != 3) {
- dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5));
-
- /* right address? */
- } else if (RC5_ADDR(rc5) == 0x0) {
- u32 toggle = RC5_TOGGLE(rc5);
- u32 instr = RC5_INSTR(rc5);
-
- /* Good code, decide if repeat/repress */
- if (toggle != RC5_TOGGLE(ir->last_rc5) ||
- instr != RC5_INSTR(ir->last_rc5)) {
- dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr,
- toggle);
- ir_input_nokey(ir->dev, &ir->ir);
- ir_input_keydown(ir->dev, &ir->ir, instr,
- instr);
- }
-
- /* Set/reset key-up timer */
- timeout = current_jiffies + (500 + rc5_key_timeout
- * HZ) / 1000;
- mod_timer(&ir->timer_keyup, timeout);
-
- /* Save code for repeat test */
- ir->last_rc5 = rc5;
- }
- }
-}
-
-static void bttv_rc5_timer_keyup(unsigned long data)
-{
- struct bttv_ir *ir = (struct bttv_ir *)data;
-
- dprintk(KERN_DEBUG "key released\n");
- ir_input_nokey(ir->dev, &ir->ir);
-}
-
/* ---------------------------------------------------------------------- */
-static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
+static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
{
if (ir->polling) {
- init_timer(&ir->timer);
- ir->timer.function = bttv_input_timer;
- ir->timer.data = (unsigned long)btv;
+ setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
ir->timer.expires = jiffies + HZ;
add_timer(&ir->timer);
} else if (ir->rc5_gpio) {
/* set timer_end for code completion */
init_timer(&ir->timer_end);
- ir->timer_end.function = bttv_rc5_timer_end;
+ ir->timer_end.function = ir_rc5_timer_end;
ir->timer_end.data = (unsigned long)ir;
init_timer(&ir->timer_keyup);
- ir->timer_keyup.function = bttv_rc5_timer_keyup;
+ ir->timer_keyup.function = ir_rc5_timer_keyup;
ir->timer_keyup.data = (unsigned long)ir;
+ ir->shift_by = 1;
+ ir->start = 3;
+ ir->addr = 0x0;
+ ir->rc5_key_timeout = ir_rc5_key_timeout;
+ ir->rc5_remote_gap = ir_rc5_remote_gap;
}
}
@@ -299,7 +192,7 @@ static void bttv_ir_stop(struct bttv *btv)
int bttv_input_init(struct bttv *btv)
{
- struct bttv_ir *ir;
+ struct card_ir *ir;
IR_KEYTAB_TYPE *ir_codes = NULL;
struct input_dev *input_dev;
int ir_type = IR_TYPE_OTHER;
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 08:50:34 +0300