diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 151 |
1 files changed, 87 insertions, 64 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 4498b944dec8..3be180b3ba27 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -128,10 +128,10 @@ config VIDEO_IR_I2C # Encoder / Decoder module configuration # -menu "Encoders/decoders and other helper chips" +menu "Encoders, decoders, sensors and other helper chips" visible if !VIDEO_HELPER_CHIPS_AUTO -comment "Audio decoders" +comment "Audio decoders, processors and mixers" config VIDEO_TVAUDIO tristate "Simple audio decoder chips" @@ -210,15 +210,6 @@ config VIDEO_CS53L32A To compile this driver as a module, choose M here: the module will be called cs53l32a. -config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Mitsubishi M52790 A/V switch. - - To compile this driver as a module, choose M here: the - module will be called m52790. - config VIDEO_TLV320AIC23B tristate "Texas Instruments TLV320AIC23B audio codec" depends on VIDEO_V4L2 && I2C && EXPERIMENTAL @@ -321,29 +312,6 @@ config VIDEO_KS0127 To compile this driver as a module, choose M here: the module will be called ks0127. -config VIDEO_OV7670 - tristate "OmniVision OV7670 sensor support" - depends on I2C && VIDEO_V4L2 - ---help--- - This is a Video4Linux2 sensor-level driver for the OmniVision - OV7670 VGA camera. It currently only works with the M88ALP01 - controller. - -config VIDEO_MT9V011 - tristate "Micron mt9v011 sensor support" - depends on I2C && VIDEO_V4L2 - ---help--- - This is a Video4Linux2 sensor-level driver for the Micron - mt0v011 1.3 Mpixel camera. It currently only works with the - em28xx driver. - -config VIDEO_TCM825X - tristate "TCM825x camera sensor support" - depends on I2C && VIDEO_V4L2 - ---help--- - This is a driver for the Toshiba TCM825x VGA camera sensor. - It is used for example in Nokia N800. - config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L2 && I2C @@ -362,15 +330,6 @@ config VIDEO_SAA711X To compile this driver as a module, choose M here: the module will be called saa7115. -config VIDEO_SAA717X - tristate "Philips SAA7171/3/4 audio/video decoders" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for the Philips SAA7171/3/4 audio/video decoders. - - To compile this driver as a module, choose M here: the - module will be called saa717x. - config VIDEO_SAA7191 tristate "Philips SAA7191 video decoder" depends on VIDEO_V4L2 && I2C @@ -420,6 +379,15 @@ config VIDEO_VPX3220 comment "Video and audio decoders" +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + source "drivers/media/video/cx25840/Kconfig" comment "MPEG video encoders" @@ -474,15 +442,6 @@ config VIDEO_ADV7175 To compile this driver as a module, choose M here: the module will be called adv7175. -config VIDEO_THS7303 - tristate "THS7303 Video Amplifier" - depends on I2C - help - Support for TI THS7303 video amplifier - - To compile this driver as a module, choose M here: the - module will be called ths7303. - config VIDEO_ADV7343 tristate "ADV7343 video encoder" depends on I2C @@ -498,6 +457,38 @@ config VIDEO_AK881X help Video output driver for AKM AK8813 and AK8814 TV encoders +comment "Camera sensor devices" + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + comment "Video improvement chips" config VIDEO_UPD64031A @@ -523,6 +514,26 @@ config VIDEO_UPD64083 To compile this driver as a module, choose M here: the module will be called upd64083. +comment "Miscelaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. + endmenu # encoder / decoder chips config VIDEO_SH_VOU @@ -682,7 +693,7 @@ config VIDEO_TIMBERDALE select VIDEO_ADV7180 select VIDEOBUF_DMA_CONTIG ---help--- - Add support for the Video In peripherial of the timberdale FPGA. + Add support for the Video In peripherial of the timberdale FPGA. source "drivers/media/video/cx88/Kconfig" @@ -875,7 +886,7 @@ config MX3_VIDEO config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface @@ -916,7 +927,7 @@ config VIDEO_OMAP2 This is a v4l2 driver for the TI OMAP2 camera capture interface config VIDEO_MX2_HOSTSUPPORT - bool + bool config VIDEO_MX2 tristate "i.MX27/i.MX25 Camera Sensor Interface driver" @@ -927,6 +938,26 @@ config VIDEO_MX2 This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor Interface +config VIDEO_SAMSUNG_S5P_FIMC + tristate "Samsung S5P and EXYNOS4 camera host interface driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 camera + host interface and video postprocessor. + + To compile this driver as a module, choose M here: the + module will be called s5p-fimc. + +config VIDEO_S5P_MIPI_CSIS + tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" + depends on VIDEO_V4L2 && PM_RUNTIME && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver. + + To compile this driver as a module, choose M here: the + module will be called s5p-csis. # # USB Multimedia device configuration @@ -983,7 +1014,7 @@ config USB_STKWEBCAM Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras may be supported by the stk11xx driver, from which this is - derived, see <http://sourceforge.net/projects/syntekdriver/> + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the module will be called stkwebcam. @@ -1022,13 +1053,5 @@ config VIDEO_MEM2MEM_TESTDEV This is a virtual test device for the memory-to-memory driver framework. -config VIDEO_SAMSUNG_S5P_FIMC - tristate "Samsung S5P FIMC (video postprocessor) driver" - depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF2_DMA_CONTIG - select V4L2_MEM2MEM_DEV - help - This is a v4l2 driver for the S5P camera interface - (video postprocessor) endif # V4L_MEM2MEM_DRIVERS |