diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 108 |
1 files changed, 38 insertions, 70 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d000522cb0f4..6830d2848bd7 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -112,7 +112,7 @@ config VIDEO_IR_I2C # menu "Encoders/decoders and other helper chips" - depends on !VIDEO_HELPER_CHIPS_AUTO + visible if !VIDEO_HELPER_CHIPS_AUTO comment "Audio decoders" @@ -539,7 +539,7 @@ config VIDEO_VIU config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 - depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE select FONT_8x16 select VIDEOBUF_VMALLOC default n @@ -599,68 +599,8 @@ config VIDEO_W9966 Check out <file:Documentation/video4linux/w9966.txt> for more information. -config VIDEO_CPIA - tristate "CPiA Video For Linux (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca cpia1 module - instead. Note that you need atleast version 0.6.4 of libv4l for - the cpia1 gspca module. - - This is the video4linux driver for cameras based on Vision's CPiA - (Colour Processor Interface ASIC), such as the Creative Labs Video - Blaster Webcam II. If you have one of these cameras, say Y here - and select parallel port and/or USB lowlevel support below, - otherwise say N. This will not work with the Creative Webcam III. - - Please read <file:Documentation/video4linux/README.cpia> for more - information. - - This driver is also available as a module (cpia). - -config VIDEO_CPIA_PP - tristate "CPiA Parallel Port Lowlevel Support" - depends on PARPORT_1284 && VIDEO_CPIA && PARPORT - help - This is the lowlevel parallel port support for cameras based on - Vision's CPiA (Colour Processor Interface ASIC), such as the - Creative Webcam II. If you have the parallel port version of one - of these cameras, say Y here, otherwise say N. It is also available - as a module (cpia_pp). - -config VIDEO_CPIA_USB - tristate "CPiA USB Lowlevel Support" - depends on VIDEO_CPIA && USB - help - This is the lowlevel USB support for cameras based on Vision's CPiA - (Colour Processor Interface ASIC), such as the Creative Webcam II. - If you have the USB version of one of these cameras, say Y here, - otherwise say N. This will not work with the Creative Webcam III. - It is also available as a module (cpia_usb). - source "drivers/media/video/cpia2/Kconfig" -config VIDEO_SAA5246A - tristate "SAA5246A, SAA5281 Teletext processor" - depends on I2C && VIDEO_V4L2 - help - Support for I2C bus based teletext using the SAA5246A or SAA5281 - chip. Useful only if you live in Europe. - - To compile this driver as a module, choose M here: the - module will be called saa5246a. - -config VIDEO_SAA5249 - tristate "SAA5249 Teletext processor" - depends on I2C && VIDEO_V4L2 - help - Support for I2C bus based teletext using the SAA5249 chip. At the - moment this is only useful on some European WinTV cards. - - To compile this driver as a module, choose M here: the - module will be called saa5249. - config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 @@ -669,14 +609,6 @@ config VIDEO_VINO Say Y here to build in support for the Vino video input system found on SGI Indy machines. -config VIDEO_STRADIS - tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS - help - Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video - driver for PCI. There is a product page at - <http://www.stradis.com/>. - source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE @@ -774,6 +706,22 @@ config VIDEO_CAFE_CCIC CMOS camera controller. This is the controller found on first- generation OLPC systems. +config VIDEO_SR030PC30 + tristate "SR030PC30 VGA camera sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C @@ -783,6 +731,12 @@ config SOC_CAMERA over a bus like PCI or USB. For example some i2c camera connected directly to the data bus of an SoC. +config SOC_CAMERA_IMX074 + tristate "imx074 support" + depends on SOC_CAMERA && I2C + help + This driver supports IMX074 cameras from Sony + config SOC_CAMERA_MT9M001 tristate "mt9m001 support" depends on SOC_CAMERA && I2C @@ -835,6 +789,12 @@ config SOC_CAMERA_PLATFORM help This is a generic SoC camera platform driver, useful for testing +config SOC_CAMERA_OV6650 + tristate "ov6650 sensor support" + depends on SOC_CAMERA && I2C + ---help--- + This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor + config SOC_CAMERA_OV772X tristate "ov772x camera support" depends on SOC_CAMERA && I2C @@ -890,6 +850,14 @@ config VIDEO_SH_MOBILE_CEU ---help--- This is a v4l2 driver for the SuperH Mobile CEU Interface +config VIDEO_OMAP1 + tristate "OMAP1 Camera Interface driver" + depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA + select VIDEOBUF_DMA_CONTIG + select VIDEOBUF_DMA_SG + ---help--- + This is a v4l2 driver for the TI OMAP1 camera interface + config VIDEO_OMAP2 tristate "OMAP2 Camera Capture Interface driver" depends on VIDEO_DEV && ARCH_OMAP2 |