summaryrefslogtreecommitdiff
path: root/drivers/media/usb/em28xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/em28xx')
-rw-r--r--drivers/media/usb/em28xx/Kconfig1
-rw-r--r--drivers/media/usb/em28xx/Makefile2
-rw-r--r--drivers/media/usb/em28xx/em28xx-camera.c434
-rw-r--r--drivers/media/usb/em28xx/em28xx-cards.c366
-rw-r--r--drivers/media/usb/em28xx/em28xx-core.c45
-rw-r--r--drivers/media/usb/em28xx/em28xx-dvb.c125
-rw-r--r--drivers/media/usb/em28xx/em28xx-i2c.c691
-rw-r--r--drivers/media/usb/em28xx/em28xx-input.c5
-rw-r--r--drivers/media/usb/em28xx/em28xx-reg.h35
-rw-r--r--drivers/media/usb/em28xx/em28xx-video.c415
-rw-r--r--drivers/media/usb/em28xx/em28xx.h231
11 files changed, 1558 insertions, 792 deletions
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index c754a80a8d8b..ca5ee6aceb62 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -46,6 +46,7 @@ config VIDEO_EM28XX_DVB
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
---help---
diff --git a/drivers/media/usb/em28xx/Makefile b/drivers/media/usb/em28xx/Makefile
index 634fb920dd39..ad6d48557940 100644
--- a/drivers/media/usb/em28xx/Makefile
+++ b/drivers/media/usb/em28xx/Makefile
@@ -1,5 +1,5 @@
em28xx-y += em28xx-video.o em28xx-i2c.o em28xx-cards.o
-em28xx-y += em28xx-core.o em28xx-vbi.o
+em28xx-y += em28xx-core.o em28xx-vbi.o em28xx-camera.o
em28xx-alsa-objs := em28xx-audio.o
em28xx-rc-objs := em28xx-input.o
diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
new file mode 100644
index 000000000000..73cc50afa5e1
--- /dev/null
+++ b/drivers/media/usb/em28xx/em28xx-camera.c
@@ -0,0 +1,434 @@
+/*
+ em28xx-camera.c - driver for Empia EM25xx/27xx/28xx USB video capture devices
+
+ Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@infradead.org>
+ Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/i2c.h>
+#include <media/soc_camera.h>
+#include <media/mt9v011.h>
+#include <media/v4l2-common.h>
+
+#include "em28xx.h"
+
+
+/* Possible i2c addresses of Micron sensors */
+static unsigned short micron_sensor_addrs[] = {
+ 0xb8 >> 1, /* MT9V111, MT9V403 */
+ 0xba >> 1, /* MT9M001/011/111/112, MT9V011/012/112, MT9D011 */
+ 0x90 >> 1, /* MT9V012/112, MT9D011 (alternative address) */
+ I2C_CLIENT_END
+};
+
+/* Possible i2c addresses of Omnivision sensors */
+static unsigned short omnivision_sensor_addrs[] = {
+ 0x42 >> 1, /* OV7725, OV7670/60/48 */
+ 0x60 >> 1, /* OV2640, OV9650/53/55 */
+ I2C_CLIENT_END
+};
+
+
+static struct soc_camera_link camlink = {
+ .bus_id = 0,
+ .flags = 0,
+ .module_name = "em28xx",
+};
+
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
+ &regs[i][0], 3);
+
+ return 0;
+}
+
+
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, },
+ { 0x0d, 0x00, 0x00, },
+ { 0x04, 0x05, 0x00, }, /* hres = 1280 */
+ { 0x03, 0x04, 0x00, }, /* vres = 1024 */
+ { 0x20, 0x11, 0x00, },
+ { 0x06, 0x00, 0x10, },
+ { 0x2b, 0x00, 0x24, },
+ { 0x2e, 0x00, 0x24, },
+ { 0x35, 0x00, 0x24, },
+ { 0x2d, 0x00, 0x20, },
+ { 0x2c, 0x00, 0x20, },
+ { 0x09, 0x0a, 0xd4, },
+ { 0x35, 0x00, 0x57, },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
+ &regs[i][0], 3);
+
+ return 0;
+}
+
+
+/*
+ * Probes Micron sensors with 8 bit address and 16 bit register width
+ */
+static int em28xx_probe_sensor_micron(struct em28xx *dev)
+{
+ int ret, i;
+ char *name;
+ u8 reg;
+ __be16 id_be;
+ u16 id;
+
+ struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+
+ dev->em28xx_sensor = EM28XX_NOSENSOR;
+ for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) {
+ client.addr = micron_sensor_addrs[i];
+ /* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */
+ /* Read chip ID from register 0x00 */
+ reg = 0x00;
+ ret = i2c_master_send(&client, &reg, 1);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ id = be16_to_cpu(id_be);
+ /* Read chip ID from register 0xff */
+ reg = 0xff;
+ ret = i2c_master_send(&client, &reg, 1);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ /* Validate chip ID to be sure we have a Micron device */
+ if (id != be16_to_cpu(id_be))
+ continue;
+ /* Check chip ID */
+ id = be16_to_cpu(id_be);
+ switch (id) {
+ case 0x1222:
+ name = "MT9V012"; /* MI370 */ /* 640x480 */
+ break;
+ case 0x1229:
+ name = "MT9V112"; /* 640x480 */
+ break;
+ case 0x1433:
+ name = "MT9M011"; /* 1280x1024 */
+ break;
+ case 0x143a: /* found in the ECS G200 */
+ name = "MT9M111"; /* MI1310 */ /* 1280x1024 */
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ break;
+ case 0x148c:
+ name = "MT9M112"; /* MI1320 */ /* 1280x1024 */
+ break;
+ case 0x1511:
+ name = "MT9D011"; /* MI2010 */ /* 1600x1200 */
+ break;
+ case 0x8232:
+ case 0x8243: /* rev B */
+ name = "MT9V011"; /* MI360 */ /* 640x480 */
+ dev->em28xx_sensor = EM28XX_MT9V011;
+ break;
+ case 0x8431:
+ name = "MT9M001"; /* 1280x1024 */
+ dev->em28xx_sensor = EM28XX_MT9M001;
+ break;
+ default:
+ em28xx_info("unknown Micron sensor detected: 0x%04x\n",
+ id);
+ return 0;
+ }
+
+ if (dev->em28xx_sensor == EM28XX_NOSENSOR)
+ em28xx_info("unsupported sensor detected: %s\n", name);
+ else
+ em28xx_info("sensor %s detected\n", name);
+
+ dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+/*
+ * Probes Omnivision sensors with 8 bit address and register width
+ */
+static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
+{
+ int ret, i;
+ char *name;
+ u8 reg;
+ u16 id;
+ struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+
+ dev->em28xx_sensor = EM28XX_NOSENSOR;
+ /* NOTE: these devices have the register auto incrementation disabled
+ * by default, so we have to use single byte reads ! */
+ for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) {
+ client.addr = omnivision_sensor_addrs[i];
+ /* Read manufacturer ID from registers 0x1c-0x1d (BE) */
+ reg = 0x1c;
+ ret = i2c_smbus_read_byte_data(&client, reg);
+ if (ret < 0) {
+ if (ret != -ENODEV)
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ id = ret << 8;
+ reg = 0x1d;
+ ret = i2c_smbus_read_byte_data(&client, reg);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ id += ret;
+ /* Check manufacturer ID */
+ if (id != 0x7fa2)
+ continue;
+ /* Read product ID from registers 0x0a-0x0b (BE) */
+ reg = 0x0a;
+ ret = i2c_smbus_read_byte_data(&client, reg);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ id = ret << 8;
+ reg = 0x0b;
+ ret = i2c_smbus_read_byte_data(&client, reg);
+ if (ret < 0) {
+ em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n",
+ client.addr << 1, ret);
+ continue;
+ }
+ id += ret;
+ /* Check product ID */
+ switch (id) {
+ case 0x2642:
+ name = "OV2640";
+ dev->em28xx_sensor = EM28XX_OV2640;
+ break;
+ case 0x7648:
+ name = "OV7648";
+ break;
+ case 0x7660:
+ name = "OV7660";
+ break;
+ case 0x7673:
+ name = "OV7670";
+ break;
+ case 0x7720:
+ name = "OV7720";
+ break;
+ case 0x7721:
+ name = "OV7725";
+ break;
+ case 0x9648: /* Rev 2 */
+ case 0x9649: /* Rev 3 */
+ name = "OV9640";
+ break;
+ case 0x9650:
+ case 0x9652: /* OV9653 */
+ name = "OV9650";
+ break;
+ case 0x9656: /* Rev 4 */
+ case 0x9657: /* Rev 5 */
+ name = "OV9655";
+ break;
+ default:
+ em28xx_info("unknown OmniVision sensor detected: 0x%04x\n",
+ id);
+ return 0;
+ }
+
+ if (dev->em28xx_sensor == EM28XX_NOSENSOR)
+ em28xx_info("unsupported sensor detected: %s\n", name);
+ else
+ em28xx_info("sensor %s detected\n", name);
+
+ dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+int em28xx_detect_sensor(struct em28xx *dev)
+{
+ int ret;
+
+ ret = em28xx_probe_sensor_micron(dev);
+
+ if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0)
+ ret = em28xx_probe_sensor_omnivision(dev);
+
+ /*
+ * NOTE: the Windows driver also probes i2c addresses
+ * 0x22 (Samsung ?) and 0x66 (Kodak ?)
+ */
+
+ if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0) {
+ em28xx_info("No sensor detected\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+int em28xx_init_camera(struct em28xx *dev)
+{
+ switch (dev->em28xx_sensor) {
+ case EM28XX_MT9V011:
+ {
+ struct mt9v011_platform_data pdata;
+ struct i2c_board_info mt9v011_info = {
+ .type = "mt9v011",
+ .addr = dev->i2c_client[dev->def_i2c_bus].addr,
+ .platform_data = &pdata,
+ };
+
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
+ dev->sensor_xtal = 4300000;
+ pdata.xtal = dev->sensor_xtal;
+ if (NULL ==
+ v4l2_i2c_new_subdev_board(&dev->v4l2_dev,
+ &dev->i2c_adap[dev->def_i2c_bus],
+ &mt9v011_info, NULL))
+ return -ENODEV;
+ /* probably means GRGB 16 bit bayer */
+ dev->vinmode = 0x0d;
+ dev->vinctl = 0x00;
+
+ break;
+ }
+ case EM28XX_MT9M001:
+ dev->sensor_xres = 1280;
+ dev->sensor_yres = 1024;
+
+ em28xx_initialize_mt9m001(dev);
+
+ /* probably means BGGR 16 bit bayer */
+ dev->vinmode = 0x0c;
+ dev->vinctl = 0x00;
+
+ break;
+ case EM28XX_MT9M111:
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
+ em28xx_initialize_mt9m111(dev);
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+ case EM28XX_OV2640:
+ {
+ struct v4l2_subdev *subdev;
+ struct i2c_board_info ov2640_info = {
+ .type = "ov2640",
+ .flags = I2C_CLIENT_SCCB,
+ .addr = dev->i2c_client[dev->def_i2c_bus].addr,
+ .platform_data = &camlink,
+ };
+ struct v4l2_mbus_framefmt fmt;
+
+ /*
+ * FIXME: sensor supports resolutions up to 1600x1200, but
+ * resolution setting/switching needs to be modified to
+ * - switch sensor output resolution (including further
+ * configuration changes)
+ * - adjust bridge xclk
+ * - disable 16 bit (12 bit) output formats on high resolutions
+ */
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+
+ subdev =
+ v4l2_i2c_new_subdev_board(&dev->v4l2_dev,
+ &dev->i2c_adap[dev->def_i2c_bus],
+ &ov2640_info, NULL);
+
+ fmt.code = V4L2_MBUS_FMT_YUYV8_2X8;
+ fmt.width = 640;
+ fmt.height = 480;
+ v4l2_subdev_call(subdev, video, s_mbus_fmt, &fmt);
+
+ /* NOTE: for UXGA=1600x1200 switch to 12MHz */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ;
+ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
+ dev->vinmode = 0x08;
+ dev->vinctl = 0x00;
+
+ break;
+ }
+ case EM28XX_NOSENSOR:
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 54a03b20de6e..83bfbe4c980f 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -34,7 +34,6 @@
#include <media/saa7115.h>
#include <media/tvp5150.h>
#include <media/tvaudio.h>
-#include <media/mt9v011.h>
#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
@@ -345,6 +344,18 @@ static struct em28xx_reg_seq pctv_460e[] = {
{ -1, -1, -1, -1},
};
+static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
+ {EM2874_R80_GPIO, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO, 0xf9, 0xff, 35},
+ {EM2874_R80_GPIO, 0xfd, 0xff, 10},
+ {EM2874_R80_GPIO, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO, 0xfe, 0xff, 10},
+ {EM2874_R80_GPIO, 0xbe, 0xff, 10},
+ {EM2874_R80_GPIO, 0xfe, 0xff, 20},
+ { -1, -1, -1, -1},
+};
+
#if 0
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
@@ -958,8 +969,8 @@ struct em28xx_board em28xx_boards[] = {
#else
.tuner_type = TUNER_ABSENT,
#endif
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
@@ -974,17 +985,27 @@ struct em28xx_board em28xx_boards[] = {
.tuner_type = TUNER_ABSENT,
#endif
.ir_codes = RC_MAP_HAUPPAUGE,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
+ [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
+ .name = "C3 Tech Digital Duo HDTV/SDTV USB",
+ .has_dvb = 1,
+ /* FIXME: Add analog support - need a saa7136 driver */
+ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
+ .ir_codes = RC_MAP_EMPTY,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ .dvb_gpio = c3tech_digital_duo_digital,
+ },
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
@@ -1404,8 +1425,8 @@ struct em28xx_board em28xx_boards[] = {
},
[EM2874_BOARD_LEADERSHIP_ISDBT] = {
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
.name = "EM2874 Leadership ISDBT",
@@ -1917,8 +1938,8 @@ struct em28xx_board em28xx_boards[] = {
* Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
[EM28174_BOARD_PCTV_290E] = {
.name = "PCTV nanoStick T2 290e",
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_290e,
.has_dvb = 1,
@@ -1927,8 +1948,8 @@ struct em28xx_board em28xx_boards[] = {
/* 2013:024f PCTV DVB-S2 Stick 460e
* Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
[EM28174_BOARD_PCTV_460E] = {
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (460e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_460e,
@@ -1958,8 +1979,9 @@ struct em28xx_board em28xx_boards[] = {
.tuner_type = TUNER_ABSENT,
.tuner_gpio = maxmedia_ub425_tc,
.has_dvb = 1,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .ir_codes = RC_MAP_REDDO,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 2304:0242 PCTV QuatroStick (510e)
@@ -1970,8 +1992,8 @@ struct em28xx_board em28xx_boards[] = {
.tuner_gpio = pctv_510e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 2013:0251 PCTV QuatroStick nano (520e)
@@ -1982,8 +2004,8 @@ struct em28xx_board em28xx_boards[] = {
.tuner_gpio = pctv_520e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
@@ -1991,8 +2013,8 @@ struct em28xx_board em28xx_boards[] = {
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
- .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
- EM28XX_I2C_CLK_WAIT_ENABLE |
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
};
@@ -2144,6 +2166,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM28174_BOARD_PCTV_460E },
{ USB_DEVICE(0x2040, 0x1605),
.driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
+ { USB_DEVICE(0x1b80, 0xe755),
+ .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
{ USB_DEVICE(0xeb1a, 0x5006),
.driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
{ USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
@@ -2183,6 +2207,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
};
+/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
static unsigned short saa711x_addrs[] = {
@@ -2204,8 +2229,9 @@ static unsigned short msp3400_addrs[] = {
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
+ struct em28xx_i2c_bus *i2c_bus = ptr;
+ struct em28xx *dev = i2c_bus->dev;
int rc = 0;
- struct em28xx *dev = ptr;
if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
return 0;
@@ -2233,145 +2259,9 @@ static inline void em28xx_set_model(struct em28xx *dev)
if (!dev->board.i2c_speed)
dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ;
-}
-
-
-/* FIXME: Should be replaced by a proper mt9m111 driver */
-static int em28xx_initialize_mt9m111(struct em28xx *dev)
-{
- int i;
- unsigned char regs[][3] = {
- { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
- { 0x0d, 0x00, 0x00, },
- { 0x0a, 0x00, 0x21, },
- { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
- };
-
- for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
-
- return 0;
-}
-
-
-/* FIXME: Should be replaced by a proper mt9m001 driver */
-static int em28xx_initialize_mt9m001(struct em28xx *dev)
-{
- int i;
- unsigned char regs[][3] = {
- { 0x0d, 0x00, 0x01, },
- { 0x0d, 0x00, 0x00, },
- { 0x04, 0x05, 0x00, }, /* hres = 1280 */
- { 0x03, 0x04, 0x00, }, /* vres = 1024 */
- { 0x20, 0x11, 0x00, },
- { 0x06, 0x00, 0x10, },
- { 0x2b, 0x00, 0x24, },
- { 0x2e, 0x00, 0x24, },
- { 0x35, 0x00, 0x24, },
- { 0x2d, 0x00, 0x20, },
- { 0x2c, 0x00, 0x20, },
- { 0x09, 0x0a, 0xd4, },
- { 0x35, 0x00, 0x57, },
- };
-
- for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
-
- return 0;
-}
-
-/* HINT method: webcam I2C chips
- *
- * This method works for webcams with Micron sensors
- */
-static int em28xx_hint_sensor(struct em28xx *dev)
-{
- int rc;
- char *sensor_name;
- unsigned char cmd;
- __be16 version_be;
- u16 version;
-
- /* Micron sensor detection */
- dev->i2c_client.addr = 0xba >> 1;
- cmd = 0;
- i2c_master_send(&dev->i2c_client, &cmd, 1);
- rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
- if (rc != 2)
- return -EINVAL;
-
- version = be16_to_cpu(version_be);
- switch (version) {
- case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
- case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
- dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
- em28xx_set_model(dev);
-
- sensor_name = "mt9v011";
- dev->em28xx_sensor = EM28XX_MT9V011;
- dev->sensor_xres = 640;
- dev->sensor_yres = 480;
- /*
- * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
- * the Silvercrest cam I have here for testing - for higher
- * resolutions, a high clock cause horizontal artifacts, so we
- * need to use a lower xclk frequency.
- * Yet, it would be possible to adjust xclk depending on the
- * desired resolution, since this affects directly the
- * frame rate.
- */
- dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
- dev->sensor_xtal = 4300000;
-
- /* probably means GRGB 16 bit bayer */
- dev->vinmode = 0x0d;
- dev->vinctl = 0x00;
-
- break;
-
- case 0x143a: /* MT9M111 as found in the ECS G200 */
- dev->model = EM2750_BOARD_UNKNOWN;
- em28xx_set_model(dev);
-
- sensor_name = "mt9m111";
- dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
- dev->em28xx_sensor = EM28XX_MT9M111;
- em28xx_initialize_mt9m111(dev);
- dev->sensor_xres = 640;
- dev->sensor_yres = 512;
-
- dev->vinmode = 0x0a;
- dev->vinctl = 0x00;
-
- break;
-
- case 0x8431:
- dev->model = EM2750_BOARD_UNKNOWN;
- em28xx_set_model(dev);
-
- sensor_name = "mt9m001";
- dev->em28xx_sensor = EM28XX_MT9M001;
- em28xx_initialize_mt9m001(dev);
- dev->sensor_xres = 1280;
- dev->sensor_yres = 1024;
-
- /* probably means BGGR 16 bit bayer */
- dev->vinmode = 0x0c;
- dev->vinctl = 0x00;
-
- break;
- default:
- printk("Unknown Micron Sensor 0x%04x\n", version);
- return -EINVAL;
- }
-
- /* Setup webcam defaults */
- em28xx_pre_card_setup(dev);
- em28xx_errdev("Sensor is %s, using model %s entry.\n",
- sensor_name, em28xx_boards[dev->model].name);
-
- return 0;
+ /* Should be initialized early, for I2C to work */
+ dev->def_i2c_bus = dev->board.def_i2c_bus;
}
/* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -2599,6 +2489,18 @@ static int em28xx_hint_board(struct em28xx *dev)
{
int i;
+ if (dev->board.is_webcam) {
+ if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
+ dev->em28xx_sensor == EM28XX_MT9M111) {
+ dev->model = EM2750_BOARD_UNKNOWN;
+ }
+ /* FIXME: IMPROVE ! */
+
+ return 0;
+ }
+
/* HINT method: EEPROM
*
* This method works only for boards with eeprom.
@@ -2638,7 +2540,7 @@ static int em28xx_hint_board(struct em28xx *dev)
/* user did not request i2c scanning => do it now */
if (!dev->i2c_hash)
- em28xx_do_i2c_scan(dev);
+ em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
@@ -2684,16 +2586,16 @@ static void em28xx_card_setup(struct em28xx *dev)
* If sensor is not found, then it isn't a webcam.
*/
if (dev->board.is_webcam) {
- if (em28xx_hint_sensor(dev) < 0)
+ if (em28xx_detect_sensor(dev) < 0)
dev->board.is_webcam = 0;
else
dev->progressive = 1;
}
- if (!dev->board.is_webcam) {
- switch (dev->model) {
- case EM2820_BOARD_UNKNOWN:
- case EM2800_BOARD_UNKNOWN:
+ switch (dev->model) {
+ case EM2750_BOARD_UNKNOWN:
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
@@ -2714,9 +2616,8 @@ static void em28xx_card_setup(struct em28xx *dev)
em28xx_pre_card_setup(dev);
}
break;
- default:
- em28xx_set_model(dev);
- }
+ default:
+ em28xx_set_model(dev);
}
em28xx_info("Identified as %s (card=%d)\n",
@@ -2736,15 +2637,19 @@ static void em28xx_card_setup(struct em28xx *dev)
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+ case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
{
struct tveeprom tv;
+
+ if (dev->eedata == NULL)
+ break;
#if defined(CONFIG_MODULES) && defined(MODULE)
request_module("tveeprom");
#endif
/* Call first TVeeprom */
- dev->i2c_client.addr = 0xa0 >> 1;
- tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
+ dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
+ tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
dev->tuner_type = tv.tuner_type;
@@ -2791,7 +2696,7 @@ static void em28xx_card_setup(struct em28xx *dev)
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
-/*
+ /*
* The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
*
* This occurs because they share identical USB vendor and
@@ -2826,51 +2731,41 @@ static void em28xx_card_setup(struct em28xx *dev)
"addresses)\n\n");
}
+ /* Free eeprom data memory */
+ kfree(dev->eedata);
+ dev->eedata = NULL;
+
/* Allow override tuner type by a module parameter */
if (tuner >= 0)
dev->tuner_type = tuner;
/* request some modules */
if (dev->board.has_msp34xx)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvp5150", 0, tvp5150_addrs);
- if (dev->em28xx_sensor == EM28XX_MT9V011) {
- struct mt9v011_platform_data pdata;
- struct i2c_board_info mt9v011_info = {
- .type = "mt9v011",
- .addr = 0xba >> 1,
- .platform_data = &pdata,
- };
-
- pdata.xtal = dev->sensor_xtal;
- v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
- &mt9v011_info, NULL);
- }
-
-
if (dev->board.adecoder == EM28XX_TVAUDIO)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
@@ -2878,18 +2773,20 @@ static void em28xx_card_setup(struct em28xx *dev)
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->tuner_addr, NULL);
}
}
em28xx_tuner_setup(dev);
+
+ em28xx_init_camera(dev);
}
@@ -2914,7 +2811,8 @@ static void request_module_async(struct work_struct *work)
if (dev->board.has_dvb)
request_module("em28xx-dvb");
- if ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)
+ if (dev->board.has_snapshot_button ||
+ ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
request_module("em28xx-rc");
#endif /* CONFIG_MODULES */
}
@@ -2941,7 +2839,9 @@ void em28xx_release_resources(struct em28xx *dev)
em28xx_release_analog_resources(dev);
- em28xx_i2c_unregister(dev);
+ if (dev->def_i2c_bus)
+ em28xx_i2c_unregister(dev, 1);
+ em28xx_i2c_unregister(dev, 0);
v4l2_ctrl_handler_free(&dev->ctrl_handler);
@@ -3002,8 +2902,23 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
case CHIP_ID_EM2750:
chip_name = "em2750";
break;
+ case CHIP_ID_EM2765:
+ chip_name = "em2765";
+ dev->wait_after_write = 0;
+ dev->is_em25xx = 1;
+ dev->eeprom_addrwidth_16bit = 1;
+ break;
case CHIP_ID_EM2820:
chip_name = "em2710/2820";
+ if (le16_to_cpu(dev->udev->descriptor.idVendor)
+ == 0xeb1a) {
+ __le16 idProd = dev->udev->descriptor.idProduct;
+ if (le16_to_cpu(idProd) == 0x2710)
+ chip_name = "em2710";
+ else if (le16_to_cpu(idProd) == 0x2820)
+ chip_name = "em2820";
+ }
+ /* NOTE: the em2820 is used in webcams, too ! */
break;
case CHIP_ID_EM2840:
chip_name = "em2840";
@@ -3019,11 +2934,13 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
chip_name = "em2874";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM2883:
chip_name = "em2882/3";
@@ -3033,6 +2950,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
chip_name = "em2884";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
+ dev->eeprom_addrwidth_16bit = 1;
break;
default:
printk(KERN_INFO DRIVER_NAME
@@ -3066,14 +2984,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
em28xx_pre_card_setup(dev);
- if (dev->chip_id == CHIP_ID_EM2820) {
- if (dev->board.is_webcam)
- chip_name = "em2710";
- else
- chip_name = "em2820";
- snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
- }
-
if (!dev->board.is_em2800) {
/* Resets I2C speed */
retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
@@ -3091,17 +3001,37 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
return retval;
}
- v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_handler_init(hdl, 8);
dev->v4l2_dev.ctrl_handler = hdl;
- /* register i2c bus */
- retval = em28xx_i2c_register(dev);
+ rt_mutex_init(&dev->i2c_bus_lock);
+
+ /* register i2c bus 0 */
+ if (dev->board.is_em2800)
+ retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
+ else
+ retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
- em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
+ em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
goto unregister_dev;
}
+ /* register i2c bus 1 */
+ if (dev->def_i2c_bus) {
+ if (dev->is_em25xx)
+ retval = em28xx_i2c_register(dev, 1,
+ EM28XX_I2C_ALGO_EM25XX_BUS_B);
+ else
+ retval = em28xx_i2c_register(dev, 1,
+ EM28XX_I2C_ALGO_EM28XX);
+ if (retval < 0) {
+ em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
+ __func__, retval);
+ goto unregister_dev;
+ }
+ }
+
/*
* Default format, used for tvp5150 or saa711x output formats
*/
@@ -3160,11 +3090,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
msleep(3);
}
- v4l2_ctrl_handler_setup(&dev->ctrl_handler);
- retval = dev->ctrl_handler.error;
- if (retval)
- goto fail;
-
retval = em28xx_register_analog_devices(dev);
if (retval < 0) {
goto fail;
@@ -3176,7 +3101,9 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
return 0;
fail:
- em28xx_i2c_unregister(dev);
+ if (dev->def_i2c_bus)
+ em28xx_i2c_unregister(dev, 1);
+ em28xx_i2c_unregister(dev, 0);
v4l2_ctrl_handler_free(&dev->ctrl_handler);
unregister_dev:
@@ -3292,14 +3219,15 @@ static int em28xx_usb_probe(struct usb_interface *interface,
dev->analog_ep_bulk =
e->bEndpointAddress;
} else {
- has_dvb = true;
if (usb_endpoint_xfer_isoc(e)) {
- dev->dvb_ep_isoc = e->bEndpointAddress;
if (size > dev->dvb_max_pkt_size_isoc) {
+ has_dvb = true; /* see NOTE (~) */
+ dev->dvb_ep_isoc = e->bEndpointAddress;
dev->dvb_max_pkt_size_isoc = size;
dev->dvb_alt_isoc = i;
}
} else {
+ has_dvb = true;
dev->dvb_ep_bulk = e->bEndpointAddress;
}
}
@@ -3326,6 +3254,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
* so far. But there might be devices for which this
* logic is not sufficient...
*/
+ /*
+ * NOTE (~): some manufacturers (e.g. Terratec) disable
+ * endpoints by setting wMaxPacketSize to 0 bytes for
+ * all alt settings. So far, we've seen this for
+ * DVB isoc endpoints only.
+ */
}
}
diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index aaedd11791f2..a802128ce9c5 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -607,12 +607,12 @@ EXPORT_SYMBOL_GPL(em28xx_audio_setup);
int em28xx_colorlevels_set_default(struct em28xx *dev)
{
- em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10); /* contrast */
- em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00); /* brightness */
- em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10); /* saturation */
- em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
- em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
- em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
+ em28xx_write_reg(dev, EM28XX_R20_YGAIN, CONTRAST_DEFAULT);
+ em28xx_write_reg(dev, EM28XX_R21_YOFFSET, BRIGHTNESS_DEFAULT);
+ em28xx_write_reg(dev, EM28XX_R22_UVGAIN, SATURATION_DEFAULT);
+ em28xx_write_reg(dev, EM28XX_R23_UOFFSET, BLUE_BALANCE_DEFAULT);
+ em28xx_write_reg(dev, EM28XX_R24_VOFFSET, RED_BALANCE_DEFAULT);
+ em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, SHARPNESS_DEFAULT);
em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
@@ -681,6 +681,11 @@ int em28xx_vbi_supported(struct em28xx *dev)
if (disable_vbi == 1)
return 0;
+ if (dev->board.is_webcam)
+ return 0;
+
+ /* FIXME: check subdevices for VBI support */
+
if (dev->chip_id == CHIP_ID_EM2860 ||
dev->chip_id == CHIP_ID_EM2883)
return 1;
@@ -692,12 +697,23 @@ int em28xx_vbi_supported(struct em28xx *dev)
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
- u8 vinctrl;
-
- ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
- dev->format->reg | 0x20, 0xff);
+ u8 fmt, vinctrl;
+
+ fmt = dev->format->reg;
+ if (!dev->is_em25xx)
+ fmt |= 0x20;
+ /*
+ * NOTE: it's not clear if this is really needed !
+ * The datasheets say bit 5 is a reserved bit and devices seem to work
+ * fine without it. But the Windows driver sets it for em2710/50+em28xx
+ * devices and we've always been setting it, too.
+ *
+ * em2765 (em25xx, em276x/7x/8x) devices do NOT work with this bit set,
+ * it's likely used for an additional (compressed ?) format there.
+ */
+ ret = em28xx_write_reg(dev, EM28XX_R27_OUTFMT, fmt);
if (ret < 0)
- return ret;
+ return ret;
ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
if (ret < 0)
@@ -751,6 +767,13 @@ static void em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1);
em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1);
em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1);
+
+ /* FIXME: function/meaning of these registers ? */
+ /* FIXME: align width+height to multiples of 4 ?! */
+ if (dev->is_em25xx) {
+ em28xx_write_reg(dev, 0x34, width >> 4);
+ em28xx_write_reg(dev, 0x35, height >> 4);
+ }
}
static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index a81ec2e8cc9b..b22f8fed8127 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -50,6 +50,7 @@
#include "tda10071.h"
#include "a8293.h"
#include "qt1010.h"
+#include "mb86a20s.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -177,7 +178,8 @@ static inline int em28xx_dvb_urb_data_copy(struct em28xx *dev, struct urb *urb)
static int em28xx_start_streaming(struct em28xx_dvb *dvb)
{
int rc;
- struct em28xx *dev = dvb->adapter.priv;
+ struct em28xx_i2c_bus *i2c_bus = dvb->adapter.priv;
+ struct em28xx *dev = i2c_bus->dev;
int dvb_max_packet_size, packet_multiplier, dvb_alt;
if (dev->dvb_xfer_bulk) {
@@ -216,12 +218,11 @@ static int em28xx_start_streaming(struct em28xx_dvb *dvb)
static int em28xx_stop_streaming(struct em28xx_dvb *dvb)
{
- struct em28xx *dev = dvb->adapter.priv;
+ struct em28xx_i2c_bus *i2c_bus = dvb->adapter.priv;
+ struct em28xx *dev = i2c_bus->dev;
em28xx_stop_urbs(dev);
- em28xx_set_mode(dev, EM28XX_SUSPEND);
-
return 0;
}
@@ -269,7 +270,8 @@ static int em28xx_stop_feed(struct dvb_demux_feed *feed)
/* ------------------------------------------------------------------ */
static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
{
- struct em28xx *dev = fe->dvb->priv;
+ struct em28xx_i2c_bus *i2c_bus = fe->dvb->priv;
+ struct em28xx *dev = i2c_bus->dev;
if (acquire)
return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
@@ -465,10 +467,10 @@ static void hauppauge_hvr930c_init(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, hauppauge_hvr930c_end);
msleep(100);
@@ -522,10 +524,10 @@ static void terratec_h5_init(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_h5_end);
};
@@ -575,10 +577,10 @@ static void terratec_htc_stick_init(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_stick_end);
};
@@ -633,10 +635,10 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
- dev->i2c_client.addr = 0x82 >> 1;
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_usb_xs_end);
};
@@ -662,10 +664,10 @@ static void pctv_520e_init(struct em28xx *dev)
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
};
- dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */
+ dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; /* 0x41 */
for (i = 0; i < ARRAY_SIZE(regs); i++)
- i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+ i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], regs[i].r, regs[i].len);
};
static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe)
@@ -768,9 +770,25 @@ static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = {
};
static struct qt1010_config em28xx_qt1010_config = {
.i2c_address = 0x62
+};
+static const struct mb86a20s_config c3tech_duo_mb86a20s_config = {
+ .demod_address = 0x10,
+ .is_serial = true,
+};
+
+static struct tda18271_std_map mb86a20s_tda18271_config = {
+ .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
};
+static struct tda18271_config c3tech_duo_tda18271_config = {
+ .std_map = &mb86a20s_tda18271_config,
+ .gate = TDA18271_GATE_DIGITAL,
+ .small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
+};
+
+
/* ------------------------------------------------------------------ */
static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
@@ -779,7 +797,7 @@ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
struct xc2028_config cfg;
memset(&cfg, 0, sizeof(cfg));
- cfg.i2c_adap = &dev->i2c_adap;
+ cfg.i2c_adap = &dev->i2c_adap[dev->def_i2c_bus];
cfg.i2c_addr = addr;
if (!dev->dvb->fe[0]) {
@@ -824,7 +842,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module,
if (dvb->fe[1])
dvb->fe[1]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
- dvb->adapter.priv = dev;
+ dvb->adapter.priv = &dev->i2c_bus[dev->def_i2c_bus];
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]);
@@ -962,7 +980,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
switch (dev->model) {
case EM2874_BOARD_LEADERSHIP_ISDBT:
dvb->fe[0] = dvb_attach(s921_attach,
- &sharp_isdbt, &dev->i2c_adap);
+ &sharp_isdbt, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
@@ -976,7 +994,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -985,7 +1003,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2880_BOARD_KWORLD_DVB_310U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -996,7 +1014,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1009,13 +1027,13 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2882_BOARD_KWORLD_VS_DVBT:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] == NULL) {
/* This board could have either a zl10353 or a mt352.
If the chip id isn't for zl10353, try mt352 */
dvb->fe[0] = dvb_attach(mt352_attach,
&terratec_xs_mt352_cfg,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
}
if (em28xx_attach_xc3028(0x61, dev) < 0) {
@@ -1026,16 +1044,16 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2870_BOARD_KWORLD_355U:
dvb->fe[0] = dvb_attach(zl10353_attach,
&em28xx_zl10353_no_i2c_gate_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL)
dvb_attach(qt1010_attach, dvb->fe[0],
- &dev->i2c_adap, &em28xx_qt1010_config);
+ &dev->i2c_adap[dev->def_i2c_bus], &em28xx_qt1010_config);
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_EVGA_INDTUBE:
dvb->fe[0] = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1044,10 +1062,10 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2882_BOARD_KWORLD_ATSC_315U:
dvb->fe[0] = dvb_attach(lgdt330x_attach,
&em2880_lgdt3303_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x61, TUNER_THOMSON_DTT761X)) {
result = -EINVAL;
goto out_free;
}
@@ -1056,7 +1074,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
- &dev->i2c_adap, &dev->udev->dev);
+ &dev->i2c_adap[dev->def_i2c_bus], &dev->udev->dev);
if (em28xx_attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
@@ -1066,10 +1084,10 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
dvb->fe[0] = dvb_attach(tda10023_attach,
&em28xx_tda10023_config,
- &dev->i2c_adap, 0x48);
+ &dev->i2c_adap[dev->def_i2c_bus], 0x48);
if (dvb->fe[0]) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x60, TUNER_PHILIPS_CU1216L)) {
result = -EINVAL;
goto out_free;
}
@@ -1078,10 +1096,10 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2870_BOARD_KWORLD_A340:
dvb->fe[0] = dvb_attach(lgdt3305_attach,
&em2870_lgdt3304_dev,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL)
dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap, &kworld_a340_config);
+ &dev->i2c_adap[dev->def_i2c_bus], &kworld_a340_config);
break;
case EM28174_BOARD_PCTV_290E:
/* set default GPIO0 for LNA, used if GPIOLIB is undefined */
@@ -1089,14 +1107,14 @@ static int em28xx_dvb_init(struct em28xx *dev)
CXD2820R_GPIO_L;
dvb->fe[0] = dvb_attach(cxd2820r_attach,
&em28xx_cxd2820r_config,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&dvb->lna_gpio);
if (dvb->fe[0]) {
/* FE 0 attach tuner */
if (!dvb_attach(tda18271_attach,
dvb->fe[0],
0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
@@ -1126,7 +1144,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
hauppauge_hvr930c_init(dev);
dvb->fe[0] = dvb_attach(drxk_attach,
- &hauppauge_930c_drxk, &dev->i2c_adap);
+ &hauppauge_930c_drxk, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1144,7 +1162,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
- if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap,
+ if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
&cfg)) {
result = -EINVAL;
goto out_free;
@@ -1157,7 +1175,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2884_BOARD_TERRATEC_H5:
terratec_h5_init(dev);
- dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap);
+ dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1171,7 +1189,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* Attach tda18271 to DVB-C frontend */
if (dvb->fe[0]->ops.i2c_gate_ctrl)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
- if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
+ if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus], 0x60)) {
result = -EINVAL;
goto out_free;
}
@@ -1179,20 +1197,29 @@ static int em28xx_dvb_init(struct em28xx *dev)
dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
break;
+ case EM2884_BOARD_C3TECH_DIGITAL_DUO:
+ dvb->fe[0] = dvb_attach(mb86a20s_attach,
+ &c3tech_duo_mb86a20s_config,
+ &dev->i2c_adap[dev->def_i2c_bus]);
+ if (dvb->fe[0] != NULL)
+ dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
+ &dev->i2c_adap[dev->def_i2c_bus],
+ &c3tech_duo_tda18271_config);
+ break;
case EM28174_BOARD_PCTV_460E:
/* attach demod */
dvb->fe[0] = dvb_attach(tda10071_attach,
- &em28xx_tda10071_config, &dev->i2c_adap);
+ &em28xx_tda10071_config, &dev->i2c_adap[dev->def_i2c_bus]);
/* attach SEC */
if (dvb->fe[0])
- dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
+ dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_a8293_config);
break;
case EM2874_BOARD_MAXMEDIA_UB425_TC:
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0]) {
/* disable I2C-gate */
@@ -1200,7 +1227,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* attach tuner */
if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0],
- &dev->i2c_adap, 0x60)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x60)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
goto out_free;
@@ -1218,12 +1245,12 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0]) {
/* attach tuner */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
@@ -1236,7 +1263,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1244,7 +1271,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
@@ -1255,7 +1282,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
- &dev->i2c_adap);
+ &dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
@@ -1263,7 +1290,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap,
+ &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 8532c1d4fd46..4851cc2e4a4d 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -5,6 +5,7 @@
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
+ Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -41,14 +42,6 @@ static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
-#define dprintk2(lvl, fmt, args...) \
-do { \
- if (i2c_debug >= lvl) { \
- printk(KERN_DEBUG "%s at %s: " fmt, \
- dev->name, __func__ , ##args); \
- } \
-} while (0)
-
/*
* em2800_i2c_send_bytes()
* send up to 4 bytes to the em2800 i2c device
@@ -76,8 +69,8 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
/* trigger write */
ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
if (ret != 2 + len) {
- em28xx_warn("failed to trigger write to i2c address 0x%x "
- "(error=%i)\n", addr, ret);
+ em28xx_warn("failed to trigger write to i2c address 0x%x (error=%i)\n",
+ addr, ret);
return (ret < 0) ? ret : -EIO;
}
/* wait for completion */
@@ -89,8 +82,8 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
} else if (ret == 0x94 + len - 1) {
return -ENODEV;
} else if (ret < 0) {
- em28xx_warn("failed to get i2c transfer status from "
- "bridge register (error=%i)\n", ret);
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
return ret;
}
msleep(5);
@@ -118,8 +111,8 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
buf2[0] = addr;
ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2);
if (ret != 2) {
- em28xx_warn("failed to trigger read from i2c address 0x%x "
- "(error=%i)\n", addr, ret);
+ em28xx_warn("failed to trigger read from i2c address 0x%x (error=%i)\n",
+ addr, ret);
return (ret < 0) ? ret : -EIO;
}
@@ -132,8 +125,8 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
} else if (ret == 0x94 + len - 1) {
return -ENODEV;
} else if (ret < 0) {
- em28xx_warn("failed to get i2c transfer status from "
- "bridge register (error=%i)\n", ret);
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
+ ret);
return ret;
}
msleep(5);
@@ -144,9 +137,8 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
/* get the received message */
ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
if (ret != len) {
- em28xx_warn("reading from i2c device at 0x%x failed: "
- "couldn't get the received message from the bridge "
- "(error=%i)\n", addr, ret);
+ em28xx_warn("reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n",
+ addr, ret);
return (ret < 0) ? ret : -EIO;
}
for (i = 0; i < len; i++)
@@ -180,19 +172,20 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
if (len < 1 || len > 64)
return -EOPNOTSUPP;
- /* NOTE: limited by the USB ctrl message constraints
- * Zero length reads always succeed, even if no device is connected */
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
/* Write to i2c device */
ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
if (ret != len) {
if (ret < 0) {
- em28xx_warn("writing to i2c device at 0x%x failed "
- "(error=%i)\n", addr, ret);
+ em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
return ret;
} else {
- em28xx_warn("%i bytes write to i2c device at 0x%x "
- "requested, but %i bytes written\n",
+ em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
len, addr, ret);
return -EIO;
}
@@ -207,14 +200,16 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
} else if (ret == 0x10) {
return -ENODEV;
} else if (ret < 0) {
- em28xx_warn("failed to read i2c transfer status from "
- "bridge (error=%i)\n", ret);
+ em28xx_warn("failed to read i2c transfer status from bridge (error=%i)\n",
+ ret);
return ret;
}
msleep(5);
- /* NOTE: do we really have to wait for success ?
- Never seen anything else than 0x00 or 0x10
- (even with high payload) ... */
+ /*
+ * NOTE: do we really have to wait for success ?
+ * Never seen anything else than 0x00 or 0x10
+ * (even with high payload) ...
+ */
}
em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
return -EIO;
@@ -230,29 +225,32 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
if (len < 1 || len > 64)
return -EOPNOTSUPP;
- /* NOTE: limited by the USB ctrl message constraints
- * Zero length reads always succeed, even if no device is connected */
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
/* Read data from i2c device */
ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
- if (ret != len) {
- if (ret < 0) {
- em28xx_warn("reading from i2c device at 0x%x failed "
- "(error=%i)\n", addr, ret);
- return ret;
- } else {
- em28xx_warn("%i bytes requested from i2c device at "
- "0x%x, but %i bytes received\n",
- len, addr, ret);
- return -EIO;
- }
+ if (ret < 0) {
+ em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
}
+ /*
+ * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * bytes if we are on bus B AND there was no write attempt to the
+ * specified slave address before AND no device is present at the
+ * requested slave address.
+ * Anyway, the next check will fail with -ENODEV in this case, so avoid
+ * spamming the system log on device probing and do nothing here.
+ */
/* Check success of the i2c operation */
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret < 0) {
- em28xx_warn("failed to read i2c transfer status from "
- "bridge (error=%i)\n", ret);
+ em28xx_warn("failed to read i2c transfer status from bridge (error=%i)\n",
+ ret);
return ret;
}
if (ret > 0) {
@@ -282,77 +280,254 @@ static int em28xx_i2c_check_for_device(struct em28xx *dev, u16 addr)
}
/*
+ * em25xx_bus_B_send_bytes
+ * write bytes to the i2c device
+ */
+static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
+ u16 len)
+{
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Set register and write value */
+ ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len);
+ if (ret != len) {
+ if (ret < 0) {
+ em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ } else {
+ em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
+ len, addr, ret);
+ return -EIO;
+ }
+ }
+ /* Check success */
+ ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
+ /*
+ * NOTE: the only error we've seen so far is
+ * 0x01 when the slave device is not present
+ */
+ if (!ret)
+ return len;
+ else if (ret > 0)
+ return -ENODEV;
+
+ return ret;
+ /*
+ * NOTE: With chip types (other chip IDs) which actually don't support
+ * this operation, it seems to succeed ALWAYS ! (even if there is no
+ * slave device or even no second i2c bus provided)
+ */
+}
+
+/*
+ * em25xx_bus_B_recv_bytes
+ * read bytes from the i2c device
+ */
+static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
+ u16 len)
+{
+ int ret;
+
+ if (len < 1 || len > 64)
+ return -EOPNOTSUPP;
+ /*
+ * NOTE: limited by the USB ctrl message constraints
+ * Zero length reads always succeed, even if no device is connected
+ */
+
+ /* Read value */
+ ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len);
+ if (ret < 0) {
+ em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n",
+ addr, ret);
+ return ret;
+ }
+ /*
+ * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * bytes if we are on bus B AND there was no write attempt to the
+ * specified slave address before AND no device is present at the
+ * requested slave address.
+ * Anyway, the next check will fail with -ENODEV in this case, so avoid
+ * spamming the system log on device probing and do nothing here.
+ */
+
+ /* Check success */
+ ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
+ /*
+ * NOTE: the only error we've seen so far is
+ * 0x01 when the slave device is not present
+ */
+ if (!ret)
+ return len;
+ else if (ret > 0)
+ return -ENODEV;
+
+ return ret;
+ /*
+ * NOTE: With chip types (other chip IDs) which actually don't support
+ * this operation, it seems to succeed ALWAYS ! (even if there is no
+ * slave device or even no second i2c bus provided)
+ */
+}
+
+/*
+ * em25xx_bus_B_check_for_device()
+ * check if there is a i2c device at the supplied address
+ */
+static int em25xx_bus_B_check_for_device(struct em28xx *dev, u16 addr)
+{
+ u8 buf;
+ int ret;
+
+ ret = em25xx_bus_B_recv_bytes(dev, addr, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+ /*
+ * NOTE: With chips which do not support this operation,
+ * it seems to succeed ALWAYS ! (even if no device connected)
+ */
+}
+
+static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ int rc = -EOPNOTSUPP;
+
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_check_for_device(dev, addr);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_check_for_device(dev, addr);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_check_for_device(dev, addr);
+ if (rc == -ENODEV) {
+ if (i2c_debug)
+ printk(" no device\n");
+ }
+ return rc;
+}
+
+static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus,
+ struct i2c_msg msg)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ u16 addr = msg.addr << 1;
+ int byte, rc = -EOPNOTSUPP;
+
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len);
+ if (i2c_debug) {
+ for (byte = 0; byte < msg.len; byte++)
+ printk(" %02x", msg.buf[byte]);
+ }
+ return rc;
+}
+
+static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus,
+ struct i2c_msg msg, int stop)
+{
+ struct em28xx *dev = i2c_bus->dev;
+ u16 addr = msg.addr << 1;
+ int byte, rc = -EOPNOTSUPP;
+
+ if (i2c_debug) {
+ for (byte = 0; byte < msg.len; byte++)
+ printk(" %02x", msg.buf[byte]);
+ }
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
+ rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
+ rc = em2800_i2c_send_bytes(dev, addr, msg.buf, msg.len);
+ else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
+ rc = em25xx_bus_B_send_bytes(dev, addr, msg.buf, msg.len);
+ return rc;
+}
+
+/*
* em28xx_i2c_xfer()
* the main i2c transfer function
*/
static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
- struct em28xx *dev = i2c_adap->algo_data;
- int addr, rc, i, byte;
+ struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
+ struct em28xx *dev = i2c_bus->dev;
+ unsigned bus = i2c_bus->bus;
+ int addr, rc, i;
+ u8 reg;
+
+ rc = rt_mutex_trylock(&dev->i2c_bus_lock);
+ if (rc < 0)
+ return rc;
+
+ /* Switch I2C bus if needed */
+ if (bus != dev->cur_i2c_bus &&
+ i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) {
+ if (bus == 1)
+ reg = EM2874_I2C_SECONDARY_BUS_SELECT;
+ else
+ reg = 0;
+ em28xx_write_reg_bits(dev, EM28XX_R06_I2C_CLK, reg,
+ EM2874_I2C_SECONDARY_BUS_SELECT);
+ dev->cur_i2c_bus = bus;
+ }
- if (num <= 0)
+ if (num <= 0) {
+ rt_mutex_unlock(&dev->i2c_bus_lock);
return 0;
+ }
for (i = 0; i < num; i++) {
addr = msgs[i].addr << 1;
- dprintk2(2, "%s %s addr=%x len=%d:",
- (msgs[i].flags & I2C_M_RD) ? "read" : "write",
- i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+ if (i2c_debug)
+ printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:",
+ dev->name, __func__ ,
+ (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+ i == num - 1 ? "stop" : "nonstop",
+ addr, msgs[i].len);
if (!msgs[i].len) { /* no len: check only for device presence */
- if (dev->board.is_em2800)
- rc = em2800_i2c_check_for_device(dev, addr);
- else
- rc = em28xx_i2c_check_for_device(dev, addr);
+ rc = i2c_check_for_device(i2c_bus, addr);
if (rc == -ENODEV) {
- if (i2c_debug >= 2)
- printk(" no device\n");
+ rt_mutex_unlock(&dev->i2c_bus_lock);
return rc;
}
} else if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
- if (dev->board.is_em2800)
- rc = em2800_i2c_recv_bytes(dev, addr,
- msgs[i].buf,
- msgs[i].len);
- else
- rc = em28xx_i2c_recv_bytes(dev, addr,
- msgs[i].buf,
- msgs[i].len);
- if (i2c_debug >= 2) {
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(" %02x", msgs[i].buf[byte]);
- }
+ rc = i2c_recv_bytes(i2c_bus, msgs[i]);
} else {
/* write bytes */
- if (i2c_debug >= 2) {
- for (byte = 0; byte < msgs[i].len; byte++)
- printk(" %02x", msgs[i].buf[byte]);
- }
- if (dev->board.is_em2800)
- rc = em2800_i2c_send_bytes(dev, addr,
- msgs[i].buf,
- msgs[i].len);
- else
- rc = em28xx_i2c_send_bytes(dev, addr,
- msgs[i].buf,
- msgs[i].len,
- i == num - 1);
+ rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1);
}
if (rc < 0) {
- if (i2c_debug >= 2)
+ if (i2c_debug)
printk(" ERROR: %i\n", rc);
+ rt_mutex_unlock(&dev->i2c_bus_lock);
return rc;
}
- if (i2c_debug >= 2)
+ if (i2c_debug)
printk("\n");
}
+ rt_mutex_unlock(&dev->i2c_bus_lock);
return num;
}
-/* based on linux/sunrpc/svcauth.h and linux/hash.h
+/*
+ * based on linux/sunrpc/svcauth.h and linux/hash.h
* The original hash function returns a different value, if arch is x86_64
- * or i386.
+ * or i386.
*/
static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
{
@@ -375,127 +550,230 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
return (hash >> (32 - bits)) & 0xffffffffUL;
}
-static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
+/*
+ * Helper function to read data blocks from i2c clients with 8 or 16 bit
+ * address width, 8 bit register width and auto incrementation been activated
+ */
+static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
+ bool addr_w16, u16 len, u8 *data)
{
- unsigned char buf, *p = eedata;
- struct em28xx_eeprom *em_eeprom = (void *)eedata;
- int i, err, size = len, block, block_max;
-
- if (dev->chip_id == CHIP_ID_EM2874 ||
- dev->chip_id == CHIP_ID_EM28174 ||
- dev->chip_id == CHIP_ID_EM2884) {
- /* Empia switched to a 16-bit addressable eeprom in newer
- devices. While we could certainly write a routine to read
- the eeprom, there is nothing of use in there that cannot be
- accessed through registers, and there is the risk that we
- could corrupt the eeprom (since a 16-bit read call is
- interpreted as a write call by 8-bit eeproms).
- */
- return 0;
+ int remain = len, rsize, rsize_max, ret;
+ u8 buf[2];
+
+ /* Sanity check */
+ if (addr + remain > (addr_w16 * 0xff00 + 0xff + 1))
+ return -EINVAL;
+ /* Select address */
+ buf[0] = addr >> 8;
+ buf[1] = addr & 0xff;
+ ret = i2c_master_send(&dev->i2c_client[bus], buf + !addr_w16, 1 + addr_w16);
+ if (ret < 0)
+ return ret;
+ /* Read data */
+ if (dev->board.is_em2800)
+ rsize_max = 4;
+ else
+ rsize_max = 64;
+ while (remain > 0) {
+ if (remain > rsize_max)
+ rsize = rsize_max;
+ else
+ rsize = remain;
+
+ ret = i2c_master_recv(&dev->i2c_client[bus], data, rsize);
+ if (ret < 0)
+ return ret;
+
+ remain -= rsize;
+ data += rsize;
}
- dev->i2c_client.addr = 0xa0 >> 1;
+ return len;
+}
+
+static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
+ u8 **eedata, u16 *eedata_len)
+{
+ const u16 len = 256;
+ /*
+ * FIXME common length/size for bytes to read, to display, hash
+ * calculation and returned device dataset. Simplifies the code a lot,
+ * but we might have to deal with multiple sizes in the future !
+ */
+ int i, err;
+ struct em28xx_eeprom *dev_config;
+ u8 buf, *data;
+
+ *eedata = NULL;
+ *eedata_len = 0;
+
+ /* EEPROM is always on i2c bus 0 on all known devices. */
+
+ dev->i2c_client[bus].addr = 0xa0 >> 1;
/* Check if board has eeprom */
- err = i2c_master_recv(&dev->i2c_client, &buf, 0);
+ err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
if (err < 0) {
- em28xx_errdev("board has no eeprom\n");
- memset(eedata, 0, len);
+ em28xx_info("board has no eeprom\n");
return -ENODEV;
}
- buf = 0;
-
- err = i2c_master_send(&dev->i2c_client, &buf, 1);
- if (err != 1) {
- printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
- dev->name, err);
- return err;
+ data = kzalloc(len, GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ /* Read EEPROM content */
+ err = em28xx_i2c_read_block(dev, bus, 0x0000,
+ dev->eeprom_addrwidth_16bit,
+ len, data);
+ if (err != len) {
+ em28xx_errdev("failed to read eeprom (err=%d)\n", err);
+ goto error;
}
- if (dev->board.is_em2800)
- block_max = 4;
- else
- block_max = 64;
-
- while (size > 0) {
- if (size > block_max)
- block = block_max;
- else
- block = size;
-
- if (block !=
- (err = i2c_master_recv(&dev->i2c_client, p, block))) {
- printk(KERN_WARNING
- "%s: i2c eeprom read error (err=%d)\n",
- dev->name, err);
- return err;
- }
- size -= block;
- p += block;
- }
+ /* Display eeprom content */
for (i = 0; i < len; i++) {
- if (0 == (i % 16))
- printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
- printk(" %02x", eedata[i]);
+ if (0 == (i % 16)) {
+ if (dev->eeprom_addrwidth_16bit)
+ em28xx_info("i2c eeprom %04x:", i);
+ else
+ em28xx_info("i2c eeprom %02x:", i);
+ }
+ printk(" %02x", data[i]);
if (15 == (i % 16))
printk("\n");
}
+ if (dev->eeprom_addrwidth_16bit)
+ em28xx_info("i2c eeprom %04x: ... (skipped)\n", i);
+
+ if (dev->eeprom_addrwidth_16bit &&
+ data[0] == 0x26 && data[3] == 0x00) {
+ /* new eeprom format; size 4-64kb */
+ u16 mc_start;
+ u16 hwconf_offset;
+
+ dev->hash = em28xx_hash_mem(data, len, 32);
+ mc_start = (data[1] << 8) + 4; /* usually 0x0004 */
+
+ em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
+ data[0], data[1], data[2], data[3], dev->hash);
+ em28xx_info("EEPROM info:\n");
+ em28xx_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n",
+ mc_start, data[2]);
+ /*
+ * boot configuration (address 0x0002):
+ * [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz
+ * [1] always selects 12 kb RAM
+ * [2] USB device speed: 1 = force Full Speed; 0 = auto detect
+ * [4] 1 = force fast mode and no suspend for device testing
+ * [5:7] USB PHY tuning registers; determined by device
+ * characterization
+ */
+
+ /*
+ * Read hardware config dataset offset from address
+ * (microcode start + 46)
+ */
+ err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2,
+ data);
+ if (err != 2) {
+ em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n",
+ err);
+ goto error;
+ }
- if (em_eeprom->id == 0x9567eb1a)
- dev->hash = em28xx_hash_mem(eedata, len, 32);
+ /* Calculate hardware config dataset start address */
+ hwconf_offset = mc_start + data[0] + (data[1] << 8);
+
+ /* Read hardware config dataset */
+ /*
+ * NOTE: the microcode copy can be multiple pages long, but
+ * we assume the hardware config dataset is the same as in
+ * the old eeprom and not longer than 256 bytes.
+ * tveeprom is currently also limited to 256 bytes.
+ */
+ err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len,
+ data);
+ if (err != len) {
+ em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n",
+ err);
+ goto error;
+ }
- printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
- dev->name, em_eeprom->id, dev->hash);
+ /* Verify hardware config dataset */
+ /* NOTE: not all devices provide this type of dataset */
+ if (data[0] != 0x1a || data[1] != 0xeb ||
+ data[2] != 0x67 || data[3] != 0x95) {
+ em28xx_info("\tno hardware configuration dataset found in eeprom\n");
+ kfree(data);
+ return 0;
+ }
- printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
+ /* TODO: decrypt eeprom data for camera bridges (em25xx, em276x+) */
+
+ } else if (!dev->eeprom_addrwidth_16bit &&
+ data[0] == 0x1a && data[1] == 0xeb &&
+ data[2] == 0x67 && data[3] == 0x95) {
+ dev->hash = em28xx_hash_mem(data, len, 32);
+ em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
+ data[0], data[1], data[2], data[3], dev->hash);
+ em28xx_info("EEPROM info:\n");
+ } else {
+ em28xx_info("unknown eeprom format or eeprom corrupted !\n");
+ err = -ENODEV;
+ goto error;
+ }
- switch (em_eeprom->chip_conf >> 4 & 0x3) {
+ *eedata = data;
+ *eedata_len = len;
+ dev_config = (void *)eedata;
+
+ switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
case 0:
- printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
+ em28xx_info("\tNo audio on board.\n");
break;
case 1:
- printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
- dev->name);
+ em28xx_info("\tAC97 audio (5 sample rates)\n");
break;
case 2:
- printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
- dev->name);
+ em28xx_info("\tI2S audio, sample rate=32k\n");
break;
case 3:
- printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
- dev->name);
+ em28xx_info("\tI2S audio, 3 sample rates\n");
break;
}
- if (em_eeprom->chip_conf & 1 << 3)
- printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
+ if (le16_to_cpu(dev_config->chip_conf) & 1 << 3)
+ em28xx_info("\tUSB Remote wakeup capable\n");
- if (em_eeprom->chip_conf & 1 << 2)
- printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
+ if (le16_to_cpu(dev_config->chip_conf) & 1 << 2)
+ em28xx_info("\tUSB Self power capable\n");
- switch (em_eeprom->chip_conf & 0x3) {
+ switch (le16_to_cpu(dev_config->chip_conf) & 0x3) {
case 0:
- printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
+ em28xx_info("\t500mA max power\n");
break;
case 1:
- printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
+ em28xx_info("\t400mA max power\n");
break;
case 2:
- printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
+ em28xx_info("\t300mA max power\n");
break;
case 3:
- printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
+ em28xx_info("\t200mA max power\n");
break;
}
- printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
- dev->name,
- em_eeprom->string_idx_table,
- em_eeprom->string1,
- em_eeprom->string2,
- em_eeprom->string3);
+ em28xx_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+ dev_config->string_idx_table,
+ le16_to_cpu(dev_config->string1),
+ le16_to_cpu(dev_config->string2),
+ le16_to_cpu(dev_config->string3));
return 0;
+
+error:
+ kfree(data);
+ return err;
}
/* ----------------------------------------------------------- */
@@ -503,13 +781,20 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
/*
* functionality()
*/
-static u32 functionality(struct i2c_adapter *adap)
+static u32 functionality(struct i2c_adapter *i2c_adap)
{
- struct em28xx *dev = adap->algo_data;
- u32 func_flags = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
- if (dev->board.is_em2800)
- func_flags &= ~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA;
- return func_flags;
+ struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
+
+ if ((i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) ||
+ (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)) {
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ } else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) {
+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) &
+ ~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA;
+ }
+
+ WARN(1, "Unknown i2c bus algorithm.\n");
+ return 0;
}
static struct i2c_algorithm em28xx_algo = {
@@ -556,7 +841,7 @@ static char *i2c_devs[128] = {
* do_i2c_scan()
* check i2c address range for devices
*/
-void em28xx_do_i2c_scan(struct em28xx *dev)
+void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus)
{
u8 i2c_devicelist[128];
unsigned char buf;
@@ -565,55 +850,68 @@ void em28xx_do_i2c_scan(struct em28xx *dev)
memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist));
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
- dev->i2c_client.addr = i;
- rc = i2c_master_recv(&dev->i2c_client, &buf, 0);
+ dev->i2c_client[bus].addr = i;
+ rc = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
if (rc < 0)
continue;
i2c_devicelist[i] = i;
- printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n",
- dev->name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+ em28xx_info("found i2c device @ 0x%x on bus %d [%s]\n",
+ i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???");
}
- dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
- ARRAY_SIZE(i2c_devicelist), 32);
+ if (bus == dev->def_i2c_bus)
+ dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
+ ARRAY_SIZE(i2c_devicelist), 32);
}
/*
* em28xx_i2c_register()
* register i2c bus
*/
-int em28xx_i2c_register(struct em28xx *dev)
+int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
+ enum em28xx_i2c_algo_type algo_type)
{
int retval;
BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
- dev->i2c_adap = em28xx_adap_template;
- dev->i2c_adap.dev.parent = &dev->udev->dev;
- strcpy(dev->i2c_adap.name, dev->name);
- dev->i2c_adap.algo_data = dev;
- i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
- retval = i2c_add_adapter(&dev->i2c_adap);
+ if (bus >= NUM_I2C_BUSES)
+ return -ENODEV;
+
+ dev->i2c_adap[bus] = em28xx_adap_template;
+ dev->i2c_adap[bus].dev.parent = &dev->udev->dev;
+ strcpy(dev->i2c_adap[bus].name, dev->name);
+
+ dev->i2c_bus[bus].bus = bus;
+ dev->i2c_bus[bus].algo_type = algo_type;
+ dev->i2c_bus[bus].dev = dev;
+ dev->i2c_adap[bus].algo_data = &dev->i2c_bus[bus];
+ i2c_set_adapdata(&dev->i2c_adap[bus], &dev->v4l2_dev);
+
+ retval = i2c_add_adapter(&dev->i2c_adap[bus]);
if (retval < 0) {
em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n",
__func__, retval);
return retval;
}
- dev->i2c_client = em28xx_client_template;
- dev->i2c_client.adapter = &dev->i2c_adap;
+ dev->i2c_client[bus] = em28xx_client_template;
+ dev->i2c_client[bus].adapter = &dev->i2c_adap[bus];
- retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
- if ((retval < 0) && (retval != -ENODEV)) {
- em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
- __func__, retval);
+ /* Up to now, all eeproms are at bus 0 */
+ if (!bus) {
+ retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
+ if ((retval < 0) && (retval != -ENODEV)) {
+ em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
+ __func__, retval);
- return retval;
+ return retval;
+ }
}
if (i2c_scan)
- em28xx_do_i2c_scan(dev);
+ em28xx_do_i2c_scan(dev, bus);
return 0;
}
@@ -622,8 +920,11 @@ int em28xx_i2c_register(struct em28xx *dev)
* em28xx_i2c_unregister()
* unregister i2c_bus
*/
-int em28xx_i2c_unregister(struct em28xx *dev)
+int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus)
{
- i2c_del_adapter(&dev->i2c_adap);
+ if (bus >= NUM_I2C_BUSES)
+ return -ENODEV;
+
+ i2c_del_adapter(&dev->i2c_adap[bus]);
return 0;
}
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 1bef990b3f18..466b19d0d767 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -280,11 +280,12 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
static int em28xx_i2c_ir_handle_key(struct em28xx_IR *ir)
{
+ struct em28xx *dev = ir->dev;
static u32 ir_key;
int rc;
struct i2c_client client;
- client.adapter = &ir->dev->i2c_adap;
+ client.adapter = &ir->dev->i2c_adap[dev->def_i2c_bus];
client.addr = ir->i2c_dev_addr;
rc = ir->get_key_i2c(&client, &ir_key);
@@ -461,7 +462,7 @@ static int em28xx_probe_i2c_ir(struct em28xx *dev)
};
while (addr_list[i] != I2C_CLIENT_END) {
- if (i2c_probe_func_quick_read(&dev->i2c_adap, addr_list[i]) == 1)
+ if (i2c_probe_func_quick_read(&dev->i2c_adap[dev->def_i2c_bus], addr_list[i]) == 1)
return addr_list[i];
i++;
}
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 885089e22bcd..622871db04aa 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -48,7 +48,7 @@
#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03
- /* GPIO/GPO registers */
+/* GPIO/GPO registers */
#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */
@@ -120,12 +120,23 @@
#define EM28XX_R1E_CWIDTH 0x1e
#define EM28XX_R1F_CHEIGHT 0x1f
-#define EM28XX_R20_YGAIN 0x20
-#define EM28XX_R21_YOFFSET 0x21
-#define EM28XX_R22_UVGAIN 0x22
-#define EM28XX_R23_UOFFSET 0x23
-#define EM28XX_R24_VOFFSET 0x24
-#define EM28XX_R25_SHARPNESS 0x25
+#define EM28XX_R20_YGAIN 0x20 /* contrast [0:4] */
+#define CONTRAST_DEFAULT 0x10
+
+#define EM28XX_R21_YOFFSET 0x21 /* brightness */ /* signed */
+#define BRIGHTNESS_DEFAULT 0x00
+
+#define EM28XX_R22_UVGAIN 0x22 /* saturation [0:4] */
+#define SATURATION_DEFAULT 0x10
+
+#define EM28XX_R23_UOFFSET 0x23 /* blue balance */ /* signed */
+#define BLUE_BALANCE_DEFAULT 0x00
+
+#define EM28XX_R24_VOFFSET 0x24 /* red balance */ /* signed */
+#define RED_BALANCE_DEFAULT 0x00
+
+#define EM28XX_R25_SHARPNESS 0x25 /* sharpness [0:4] */
+#define SHARPNESS_DEFAULT 0x00
#define EM28XX_R26_COMPR 0x26
#define EM28XX_R27_OUTFMT 0x27
@@ -152,8 +163,17 @@
#define EM28XX_R31_HSCALEHIGH 0x31
#define EM28XX_R32_VSCALELOW 0x32
#define EM28XX_R33_VSCALEHIGH 0x33
+#define EM28XX_HVSCALE_MAX 0x3fff /* => 20% */
+
#define EM28XX_R34_VBI_START_H 0x34
#define EM28XX_R35_VBI_START_V 0x35
+/*
+ * NOTE: the EM276x (and EM25xx, EM277x/8x ?) (camera bridges) use these
+ * registers for a different unknown purpose.
+ * => register 0x34 is set to capture width / 16
+ * => register 0x35 is set to capture height / 16
+ */
+
#define EM28XX_R36_VBI_WIDTH 0x36
#define EM28XX_R37_VBI_HEIGHT 0x37
@@ -206,6 +226,7 @@ enum em28xx_chip_id {
CHIP_ID_EM2860 = 34,
CHIP_ID_EM2870 = 35,
CHIP_ID_EM2883 = 36,
+ CHIP_ID_EM2765 = 54,
CHIP_ID_EM2874 = 65,
CHIP_ID_EM2884 = 68,
CHIP_ID_EM28174 = 113,
diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
index 32bd7de5dec1..32d60e5546bc 100644
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -52,7 +52,7 @@
#define DRIVER_DESC "Empia em28xx based USB video device driver"
-#define EM28XX_VERSION "0.1.3"
+#define EM28XX_VERSION "0.2.0"
#define em28xx_videodbg(fmt, arg...) do {\
if (video_debug) \
@@ -76,6 +76,16 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(EM28XX_VERSION);
+
+#define EM25XX_FRMDATAHDR_BYTE1 0x02
+#define EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE 0x20
+#define EM25XX_FRMDATAHDR_BYTE2_FRAME_END 0x02
+#define EM25XX_FRMDATAHDR_BYTE2_FRAME_ID 0x01
+#define EM25XX_FRMDATAHDR_BYTE2_MASK (EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE | \
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_END | \
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_ID)
+
+
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
@@ -408,6 +418,62 @@ static inline void process_frame_data_em28xx(struct em28xx *dev,
em28xx_copy_video(dev, buf, data_pkt, data_len);
}
+/*
+ * Process data packet according to the em25xx/em276x/7x/8x frame data format
+ */
+static inline void process_frame_data_em25xx(struct em28xx *dev,
+ unsigned char *data_pkt,
+ unsigned int data_len)
+{
+ struct em28xx_buffer *buf = dev->usb_ctl.vid_buf;
+ struct em28xx_dmaqueue *dmaq = &dev->vidq;
+ bool frame_end = 0;
+
+ /* Check for header */
+ /* NOTE: at least with bulk transfers, only the first packet
+ * has a header and has always set the FRAME_END bit */
+ if (data_len >= 2) { /* em25xx header is only 2 bytes long */
+ if ((data_pkt[0] == EM25XX_FRMDATAHDR_BYTE1) &&
+ ((data_pkt[1] & ~EM25XX_FRMDATAHDR_BYTE2_MASK) == 0x00)) {
+ dev->top_field = !(data_pkt[1] &
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_ID);
+ frame_end = data_pkt[1] &
+ EM25XX_FRMDATAHDR_BYTE2_FRAME_END;
+ data_pkt += 2;
+ data_len -= 2;
+ }
+
+ /* Finish field and prepare next (BULK only) */
+ if (dev->analog_xfer_bulk && frame_end) {
+ buf = finish_field_prepare_next(dev, buf, dmaq);
+ dev->usb_ctl.vid_buf = buf;
+ }
+ /* NOTE: in ISOC mode when a new frame starts and buf==NULL,
+ * we COULD already prepare a buffer here to avoid skipping the
+ * first frame.
+ */
+ }
+
+ /* Copy data */
+ if (buf != NULL && data_len > 0)
+ em28xx_copy_video(dev, buf, data_pkt, data_len);
+
+ /* Finish frame (ISOC only) => avoids lag of 1 frame */
+ if (!dev->analog_xfer_bulk && frame_end) {
+ buf = finish_field_prepare_next(dev, buf, dmaq);
+ dev->usb_ctl.vid_buf = buf;
+ }
+
+ /* NOTE: Tested with USB bulk transfers only !
+ * The wording in the datasheet suggests that isoc might work different.
+ * The current code assumes that with isoc transfers each packet has a
+ * header like with the other em28xx devices.
+ */
+ /* NOTE: Support for interlaced mode is pure theory. It has not been
+ * tested and it is unknown if these devices actually support it. */
+ /* NOTE: No VBI support yet (these chips likely do not support VBI). */
+}
+
/* Processes and copies the URB data content (video and VBI data) */
static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
{
@@ -460,7 +526,13 @@ static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
continue;
}
- process_frame_data_em28xx(dev, usb_data_pkt, usb_data_len);
+ if (dev->is_em25xx)
+ process_frame_data_em25xx(dev,
+ usb_data_pkt, usb_data_len);
+ else
+ process_frame_data_em28xx(dev,
+ usb_data_pkt, usb_data_len);
+
}
return 1;
}
@@ -700,6 +772,7 @@ int em28xx_vb2_setup(struct em28xx *dev)
q = &dev->vb_vidq;
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+ q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct em28xx_buffer);
q->ops = &em28xx_video_qops;
@@ -713,6 +786,7 @@ int em28xx_vb2_setup(struct em28xx *dev)
q = &dev->vb_vbiq;
q->type = V4L2_BUF_TYPE_VBI_CAPTURE;
q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR;
+ q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct em28xx_buffer);
q->ops = &em28xx_vbi_qops;
@@ -782,33 +856,45 @@ void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv)
static int em28xx_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct em28xx *dev = container_of(ctrl->handler, struct em28xx, ctrl_handler);
+ int ret = -EINVAL;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
dev->mute = ctrl->val;
+ ret = em28xx_audio_analog_set(dev);
break;
case V4L2_CID_AUDIO_VOLUME:
dev->volume = ctrl->val;
+ ret = em28xx_audio_analog_set(dev);
+ break;
+ case V4L2_CID_CONTRAST:
+ ret = em28xx_write_reg(dev, EM28XX_R20_YGAIN, ctrl->val);
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ ret = em28xx_write_reg(dev, EM28XX_R21_YOFFSET, ctrl->val);
+ break;
+ case V4L2_CID_SATURATION:
+ ret = em28xx_write_reg(dev, EM28XX_R22_UVGAIN, ctrl->val);
+ break;
+ case V4L2_CID_BLUE_BALANCE:
+ ret = em28xx_write_reg(dev, EM28XX_R23_UOFFSET, ctrl->val);
+ break;
+ case V4L2_CID_RED_BALANCE:
+ ret = em28xx_write_reg(dev, EM28XX_R24_VOFFSET, ctrl->val);
+ break;
+ case V4L2_CID_SHARPNESS:
+ ret = em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, ctrl->val);
break;
}
- return em28xx_audio_analog_set(dev);
+ return (ret < 0) ? ret : 0;
}
const struct v4l2_ctrl_ops em28xx_ctrl_ops = {
.s_ctrl = em28xx_s_ctrl,
};
-static int check_dev(struct em28xx *dev)
-{
- if (dev->disconnected) {
- em28xx_errdev("v4l2 ioctl: device not present\n");
- return -ENODEV;
- }
- return 0;
-}
-
-static void get_scale(struct em28xx *dev,
+static void size_to_scale(struct em28xx *dev,
unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale)
{
@@ -816,12 +902,23 @@ static void get_scale(struct em28xx *dev,
unsigned int maxh = norm_maxh(dev);
*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
- if (*hscale >= 0x4000)
- *hscale = 0x3fff;
+ if (*hscale > EM28XX_HVSCALE_MAX)
+ *hscale = EM28XX_HVSCALE_MAX;
*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
- if (*vscale >= 0x4000)
- *vscale = 0x3fff;
+ if (*vscale > EM28XX_HVSCALE_MAX)
+ *vscale = EM28XX_HVSCALE_MAX;
+}
+
+static void scale_to_size(struct em28xx *dev,
+ unsigned int hscale, unsigned int vscale,
+ unsigned int *width, unsigned int *height)
+{
+ unsigned int maxw = norm_maxw(dev);
+ unsigned int maxh = norm_maxh(dev);
+
+ *width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
+ *height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
}
/* ------------------------------------------------------------------
@@ -898,10 +995,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
1, 0);
}
- get_scale(dev, width, height, &hscale, &vscale);
-
- width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
- height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
+ size_to_scale(dev, width, height, &hscale, &vscale);
+ scale_to_size(dev, hscale, vscale, &width, &height);
f->fmt.pix.width = width;
f->fmt.pix.height = height;
@@ -932,7 +1027,7 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
dev->height = height;
/* set new image size */
- get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+ size_to_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
em28xx_resolution_set(dev);
@@ -957,13 +1052,6 @@ static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- if (dev->board.is_webcam)
- return -ENOTTY;
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
*norm = dev->norm;
@@ -974,48 +1062,35 @@ static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- if (dev->board.is_webcam)
- return -ENOTTY;
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
v4l2_device_call_all(&dev->v4l2_dev, 0, video, querystd, norm);
return 0;
}
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
struct v4l2_format f;
- int rc;
- if (dev->board.is_webcam)
- return -ENOTTY;
- if (*norm == dev->norm)
+ if (norm == dev->norm)
return 0;
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
if (dev->streaming_users > 0)
return -EBUSY;
- dev->norm = *norm;
+ dev->norm = norm;
/* Adjusts width/height, if needed */
f.fmt.pix.width = 720;
- f.fmt.pix.height = (*norm & V4L2_STD_525_60) ? 480 : 576;
+ f.fmt.pix.height = (norm & V4L2_STD_525_60) ? 480 : 576;
vidioc_try_fmt_vid_cap(file, priv, &f);
/* set new image size */
dev->width = f.fmt.pix.width;
dev->height = f.fmt.pix.height;
- get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+ size_to_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
em28xx_resolution_set(dev);
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
@@ -1030,9 +1105,6 @@ static int vidioc_g_parm(struct file *file, void *priv,
struct em28xx *dev = fh->dev;
int rc = 0;
- if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
p->parm.capture.readbuffers = EM28XX_MIN_BUF;
if (dev->board.is_webcam)
rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
@@ -1050,12 +1122,6 @@ static int vidioc_s_parm(struct file *file, void *priv,
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- if (!dev->board.is_webcam)
- return -ENOTTY;
-
- if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
p->parm.capture.readbuffers = EM28XX_MIN_BUF;
return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
}
@@ -1116,11 +1182,6 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
if (i >= MAX_EM28XX_INPUT)
return -EINVAL;
@@ -1136,9 +1197,6 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- if (!dev->audio_mode.has_audio)
- return -EINVAL;
-
switch (a->index) {
case EM28XX_AMUX_VIDEO:
strcpy(a->name, "Television");
@@ -1179,10 +1237,6 @@ static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
-
- if (!dev->audio_mode.has_audio)
- return -EINVAL;
-
if (a->index >= MAX_EM28XX_INPUT)
return -EINVAL;
if (0 == INPUT(a->index)->type)
@@ -1202,11 +1256,6 @@ static int vidioc_g_tuner(struct file *file, void *priv,
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
if (0 != t->index)
return -EINVAL;
@@ -1218,15 +1267,10 @@ static int vidioc_g_tuner(struct file *file, void *priv,
}
static int vidioc_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
+ const struct v4l2_tuner *t)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
if (0 != t->index)
return -EINVAL;
@@ -1249,39 +1293,22 @@ static int vidioc_g_frequency(struct file *file, void *priv,
}
static int vidioc_s_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
+ const struct v4l2_frequency *f)
{
+ struct v4l2_frequency new_freq = *f;
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int rc;
-
- rc = check_dev(dev);
- if (rc < 0)
- return rc;
if (0 != f->tuner)
return -EINVAL;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f);
- dev->ctl_freq = f->frequency;
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, &new_freq);
+ dev->ctl_freq = new_freq.frequency;
return 0;
}
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int em28xx_reg_len(int reg)
-{
- switch (reg) {
- case EM28XX_R40_AC97LSB:
- case EM28XX_R30_HSCALELOW:
- case EM28XX_R32_VSCALELOW:
- return 2;
- default:
- return 1;
- }
-}
-
static int vidioc_g_chip_ident(struct file *file, void *priv,
struct v4l2_dbg_chip_ident *chip)
{
@@ -1290,9 +1317,9 @@ static int vidioc_g_chip_ident(struct file *file, void *priv,
chip->ident = V4L2_IDENT_NONE;
chip->revision = 0;
- if (chip->match.type == V4L2_CHIP_MATCH_HOST) {
- if (v4l2_chip_match_host(&chip->match))
- chip->ident = V4L2_IDENT_NONE;
+ if (chip->match.type == V4L2_CHIP_MATCH_BRIDGE) {
+ if (chip->match.addr > 1)
+ return -EINVAL;
return 0;
}
if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER &&
@@ -1304,6 +1331,33 @@ static int vidioc_g_chip_ident(struct file *file, void *priv,
return 0;
}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_chip_info(struct file *file, void *priv,
+ struct v4l2_dbg_chip_info *chip)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ if (chip->match.addr > 1)
+ return -EINVAL;
+ if (chip->match.addr == 1)
+ strlcpy(chip->name, "ac97", sizeof(chip->name));
+ else
+ strlcpy(chip->name, dev->v4l2_dev.name, sizeof(chip->name));
+ return 0;
+}
+
+static int em28xx_reg_len(int reg)
+{
+ switch (reg) {
+ case EM28XX_R40_AC97LSB:
+ case EM28XX_R30_HSCALELOW:
+ case EM28XX_R32_VSCALELOW:
+ return 2;
+ default:
+ return 1;
+ }
+}
static int vidioc_g_register(struct file *file, void *priv,
struct v4l2_dbg_register *reg)
@@ -1313,6 +1367,12 @@ static int vidioc_g_register(struct file *file, void *priv,
int ret;
switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_BRIDGE:
+ if (reg->match.addr > 1)
+ return -EINVAL;
+ if (!reg->match.addr)
+ break;
+ /* fall-through */
case V4L2_CHIP_MATCH_AC97:
ret = em28xx_read_ac97(dev, reg->reg);
if (ret < 0)
@@ -1329,8 +1389,7 @@ static int vidioc_g_register(struct file *file, void *priv,
v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg);
return 0;
default:
- if (!v4l2_chip_match_host(&reg->match))
- return -EINVAL;
+ return -EINVAL;
}
/* Match host */
@@ -1356,13 +1415,19 @@ static int vidioc_g_register(struct file *file, void *priv,
}
static int vidioc_s_register(struct file *file, void *priv,
- struct v4l2_dbg_register *reg)
+ const struct v4l2_dbg_register *reg)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
__le16 buf;
switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_BRIDGE:
+ if (reg->match.addr > 1)
+ return -EINVAL;
+ if (!reg->match.addr)
+ break;
+ /* fall-through */
case V4L2_CHIP_MATCH_AC97:
return em28xx_write_ac97(dev, reg->reg, reg->val);
case V4L2_CHIP_MATCH_I2C_DRIVER:
@@ -1373,8 +1438,7 @@ static int vidioc_s_register(struct file *file, void *priv,
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg);
return 0;
default:
- if (!v4l2_chip_match_host(&reg->match))
- return -EINVAL;
+ return -EINVAL;
}
/* Match host */
@@ -1386,26 +1450,6 @@ static int vidioc_s_register(struct file *file, void *priv,
#endif
-static int vidioc_cropcap(struct file *file, void *priv,
- struct v4l2_cropcap *cc)
-{
- struct em28xx_fh *fh = priv;
- struct em28xx *dev = fh->dev;
-
- if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- cc->bounds.left = 0;
- cc->bounds.top = 0;
- cc->bounds.width = dev->width;
- cc->bounds.height = dev->height;
- cc->defrect = cc->bounds;
- cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */
- cc->pixelaspect.denominator = 59;
-
- return 0;
-}
-
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
@@ -1482,8 +1526,12 @@ static int vidioc_enum_framesizes(struct file *file, void *priv,
/* Report a continuous range */
fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
- fsize->stepwise.min_width = 48;
- fsize->stepwise.min_height = 32;
+ scale_to_size(dev, EM28XX_HVSCALE_MAX, EM28XX_HVSCALE_MAX,
+ &fsize->stepwise.min_width, &fsize->stepwise.min_height);
+ if (fsize->stepwise.min_width < 48)
+ fsize->stepwise.min_width = 48;
+ if (fsize->stepwise.min_height < 38)
+ fsize->stepwise.min_height = 38;
fsize->stepwise.max_width = maxw;
fsize->stepwise.max_height = maxh;
fsize->stepwise.step_width = 1;
@@ -1522,35 +1570,6 @@ static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
return 0;
}
-static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
- struct v4l2_format *format)
-{
- struct em28xx_fh *fh = priv;
- struct em28xx *dev = fh->dev;
-
- format->fmt.vbi.samples_per_line = dev->vbi_width;
- format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
- format->fmt.vbi.offset = 0;
- format->fmt.vbi.flags = 0;
- format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
- format->fmt.vbi.count[0] = dev->vbi_height;
- format->fmt.vbi.count[1] = dev->vbi_height;
- memset(format->fmt.vbi.reserved, 0, sizeof(format->fmt.vbi.reserved));
-
- /* Varies by video standard (NTSC, PAL, etc.) */
- if (dev->norm & V4L2_STD_525_60) {
- /* NTSC */
- format->fmt.vbi.start[0] = 10;
- format->fmt.vbi.start[1] = 273;
- } else if (dev->norm & V4L2_STD_625_50) {
- /* PAL */
- format->fmt.vbi.start[0] = 6;
- format->fmt.vbi.start[1] = 318;
- }
-
- return 0;
-}
-
/* ----------------------------------------------------------- */
/* RADIO ESPECIFIC IOCTLS */
/* ----------------------------------------------------------- */
@@ -1564,7 +1583,6 @@ static int radio_g_tuner(struct file *file, void *priv,
return -EINVAL;
strcpy(t->name, "Radio");
- t->type = V4L2_TUNER_RADIO;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
@@ -1572,7 +1590,7 @@ static int radio_g_tuner(struct file *file, void *priv,
}
static int radio_s_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
+ const struct v4l2_tuner *t)
{
struct em28xx *dev = ((struct em28xx_fh *)priv)->dev;
@@ -1749,11 +1767,10 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
.vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_try_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
- .vidioc_s_fmt_vbi_cap = vidioc_s_fmt_vbi_cap,
+ .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_enum_framesizes = vidioc_enum_framesizes,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
- .vidioc_cropcap = vidioc_cropcap,
.vidioc_reqbufs = vb2_ioctl_reqbufs,
.vidioc_create_bufs = vb2_ioctl_create_bufs,
@@ -1778,10 +1795,11 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+ .vidioc_g_chip_ident = vidioc_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_chip_info = vidioc_g_chip_info,
.vidioc_g_register = vidioc_g_register,
.vidioc_s_register = vidioc_s_register,
- .vidioc_g_chip_ident = vidioc_g_chip_ident,
#endif
};
@@ -1808,7 +1826,9 @@ static const struct v4l2_ioctl_ops radio_ioctl_ops = {
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+ .vidioc_g_chip_ident = vidioc_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_chip_info = vidioc_g_chip_info,
.vidioc_g_register = vidioc_g_register,
.vidioc_s_register = vidioc_s_register,
#endif
@@ -1887,9 +1907,42 @@ int em28xx_register_analog_devices(struct em28xx *dev)
(EM28XX_XCLK_AUDIO_UNMUTE | val));
em28xx_set_outfmt(dev);
- em28xx_colorlevels_set_default(dev);
em28xx_compression_disable(dev);
+ /* Add image controls */
+ /* NOTE: at this point, the subdevices are already registered, so bridge
+ * controls are only added/enabled when no subdevice provides them */
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_CONTRAST))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_CONTRAST,
+ 0, 0x1f, 1, CONTRAST_DEFAULT);
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_BRIGHTNESS))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_BRIGHTNESS,
+ -0x80, 0x7f, 1, BRIGHTNESS_DEFAULT);
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_SATURATION))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_SATURATION,
+ 0, 0x1f, 1, SATURATION_DEFAULT);
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_BLUE_BALANCE))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_BLUE_BALANCE,
+ -0x30, 0x30, 1, BLUE_BALANCE_DEFAULT);
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_RED_BALANCE))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_RED_BALANCE,
+ -0x30, 0x30, 1, RED_BALANCE_DEFAULT);
+ if (NULL == v4l2_ctrl_find(&dev->ctrl_handler, V4L2_CID_SHARPNESS))
+ v4l2_ctrl_new_std(&dev->ctrl_handler, &em28xx_ctrl_ops,
+ V4L2_CID_SHARPNESS,
+ 0, 0x0f, 1, SHARPNESS_DEFAULT);
+
+ /* Reset image controls */
+ em28xx_colorlevels_set_default(dev);
+ v4l2_ctrl_handler_setup(&dev->ctrl_handler);
+ if (dev->ctrl_handler.error)
+ return dev->ctrl_handler.error;
+
/* allocate and fill video video_device struct */
dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
if (!dev->vdev) {
@@ -1899,6 +1952,25 @@ int em28xx_register_analog_devices(struct em28xx *dev)
dev->vdev->queue = &dev->vb_vidq;
dev->vdev->queue->lock = &dev->vb_queue_lock;
+ /* disable inapplicable ioctls */
+ if (dev->board.is_webcam) {
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_QUERYSTD);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_G_STD);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_STD);
+ } else {
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_PARM);
+ }
+ if (dev->tuner_type == TUNER_ABSENT) {
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_G_TUNER);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_TUNER);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_G_FREQUENCY);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_FREQUENCY);
+ }
+ if (!dev->audio_mode.has_audio) {
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_G_AUDIO);
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_AUDIO);
+ }
+
/* register v4l2 video video_device */
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
@@ -1916,6 +1988,19 @@ int em28xx_register_analog_devices(struct em28xx *dev)
dev->vbi_dev->queue = &dev->vb_vbiq;
dev->vbi_dev->queue->lock = &dev->vb_vbi_queue_lock;
+ /* disable inapplicable ioctls */
+ v4l2_disable_ioctl(dev->vdev, VIDIOC_S_PARM);
+ if (dev->tuner_type == TUNER_ABSENT) {
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_G_TUNER);
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_S_TUNER);
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_G_FREQUENCY);
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_S_FREQUENCY);
+ }
+ if (!dev->audio_mode.has_audio) {
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_G_AUDIO);
+ v4l2_disable_ioctl(dev->vbi_dev, VIDIOC_S_AUDIO);
+ }
+
/* register v4l2 vbi video_device */
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 5f0b2c59e846..a9323b63d8e5 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -42,28 +42,28 @@
#include "em28xx-reg.h"
/* Boards supported by driver */
-#define EM2800_BOARD_UNKNOWN 0
-#define EM2820_BOARD_UNKNOWN 1
-#define EM2820_BOARD_TERRATEC_CINERGY_250 2
-#define EM2820_BOARD_PINNACLE_USB_2 3
-#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
-#define EM2820_BOARD_MSI_VOX_USB_2 5
-#define EM2800_BOARD_TERRATEC_CINERGY_200 6
-#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
-#define EM2800_BOARD_KWORLD_USB2800 8
-#define EM2820_BOARD_PINNACLE_DVC_90 9
-#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
-#define EM2880_BOARD_TERRATEC_HYBRID_XS 11
-#define EM2820_BOARD_KWORLD_PVRTV2800RF 12
-#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
-#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
-#define EM2800_BOARD_VGEAR_POCKETTV 15
-#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16
-#define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17
-#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
-#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19
-#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20
-#define EM2800_BOARD_GRABBEEX_USB2800 21
+#define EM2800_BOARD_UNKNOWN 0
+#define EM2820_BOARD_UNKNOWN 1
+#define EM2820_BOARD_TERRATEC_CINERGY_250 2
+#define EM2820_BOARD_PINNACLE_USB_2 3
+#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
+#define EM2820_BOARD_MSI_VOX_USB_2 5
+#define EM2800_BOARD_TERRATEC_CINERGY_200 6
+#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
+#define EM2800_BOARD_KWORLD_USB2800 8
+#define EM2820_BOARD_PINNACLE_DVC_90 9
+#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
+#define EM2880_BOARD_TERRATEC_HYBRID_XS 11
+#define EM2820_BOARD_KWORLD_PVRTV2800RF 12
+#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
+#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
+#define EM2800_BOARD_VGEAR_POCKETTV 15
+#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16
+#define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17
+#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
+#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19
+#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20
+#define EM2800_BOARD_GRABBEEX_USB2800 21
#define EM2750_BOARD_UNKNOWN 22
#define EM2750_BOARD_DLCW_130 23
#define EM2820_BOARD_DLINK_USB_TV 24
@@ -99,36 +99,37 @@
#define EM2882_BOARD_KWORLD_VS_DVBT 54
#define EM2882_BOARD_TERRATEC_HYBRID_XS 55
#define EM2882_BOARD_PINNACLE_HYBRID_PRO_330E 56
-#define EM2883_BOARD_KWORLD_HYBRID_330U 57
+#define EM2883_BOARD_KWORLD_HYBRID_330U 57
#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58
#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60
#define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61
#define EM2820_BOARD_GADMEI_TVR200 62
-#define EM2860_BOARD_KAIOMY_TVNPC_U2 63
-#define EM2860_BOARD_EASYCAP 64
+#define EM2860_BOARD_KAIOMY_TVNPC_U2 63
+#define EM2860_BOARD_EASYCAP 64
#define EM2820_BOARD_IODATA_GVMVP_SZ 65
#define EM2880_BOARD_EMPIRE_DUAL_TV 66
#define EM2860_BOARD_TERRATEC_GRABBY 67
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
#define EM2882_BOARD_EVGA_INDTUBE 70
-#define EM2820_BOARD_SILVERCREST_WEBCAM 71
-#define EM2861_BOARD_GADMEI_UTV330PLUS 72
-#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
+#define EM2820_BOARD_SILVERCREST_WEBCAM 71
+#define EM2861_BOARD_GADMEI_UTV330PLUS 72
+#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
#define EM2800_BOARD_VC211A 74
#define EM2882_BOARD_DIKOM_DK300 75
#define EM2870_BOARD_KWORLD_A340 76
#define EM2874_BOARD_LEADERSHIP_ISDBT 77
-#define EM28174_BOARD_PCTV_290E 78
+#define EM28174_BOARD_PCTV_290E 78
#define EM2884_BOARD_TERRATEC_H5 79
-#define EM28174_BOARD_PCTV_460E 80
+#define EM28174_BOARD_PCTV_460E 80
#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81
#define EM2884_BOARD_CINERGY_HTC_STICK 82
-#define EM2860_BOARD_HT_VIDBOX_NW03 83
-#define EM2874_BOARD_MAXMEDIA_UB425_TC 84
-#define EM2884_BOARD_PCTV_510E 85
-#define EM2884_BOARD_PCTV_520E 86
+#define EM2860_BOARD_HT_VIDBOX_NW03 83
+#define EM2874_BOARD_MAXMEDIA_UB425_TC 84
+#define EM2884_BOARD_PCTV_510E 85
+#define EM2884_BOARD_PCTV_520E 86
#define EM2884_BOARD_TERRATEC_HTC_USB_XS 87
+#define EM2884_BOARD_C3TECH_DIGITAL_DUO 88
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -157,6 +158,9 @@
#define EM28XX_NUM_BUFS 5
#define EM28XX_DVB_NUM_BUFS 5
+/* max number of I2C buses on em28xx devices */
+#define NUM_I2C_BUSES 2
+
/* isoc transfers: number of packets for each buffer
windows requests only 64 packets .. so we better do the same
this is what I found out for all alternate numbers there!
@@ -172,27 +176,6 @@
#define EM28XX_INTERLACED_DEFAULT 1
-/*
-#define (use usbview if you want to get the other alternate number infos)
-#define
-#define alternate number 2
-#define Endpoint Address: 82
- Direction: in
- Attribute: 1
- Type: Isoc
- Max Packet Size: 1448
- Interval: 125us
-
- alternate number 7
-
- Endpoint Address: 82
- Direction: in
- Attribute: 1
- Type: Isoc
- Max Packet Size: 3072
- Interval: 125us
-*/
-
/* time in msecs to wait for i2c writes to finish */
#define EM2800_I2C_XFER_TIMEOUT 20
@@ -381,6 +364,7 @@ enum em28xx_sensor {
EM28XX_MT9V011,
EM28XX_MT9M001,
EM28XX_MT9M111,
+ EM28XX_OV2640,
};
enum em28xx_adecoder {
@@ -393,6 +377,7 @@ struct em28xx_board {
int vchannels;
int tuner_type;
int tuner_addr;
+ unsigned def_i2c_bus; /* Default I2C bus */
/* i2c flags */
unsigned int tda9887_conf;
@@ -426,15 +411,15 @@ struct em28xx_board {
};
struct em28xx_eeprom {
- u32 id; /* 0x9567eb1a */
- u16 vendor_ID;
- u16 product_ID;
+ u8 id[4]; /* 1a eb 67 95 */
+ __le16 vendor_ID;
+ __le16 product_ID;
- u16 chip_conf;
+ __le16 chip_conf;
- u16 board_conf;
+ __le16 board_conf;
- u16 string1, string2, string3;
+ __le16 string1, string2, string3;
u8 string_idx_table;
};
@@ -477,6 +462,20 @@ struct em28xx_fh {
enum v4l2_buf_type type;
};
+enum em28xx_i2c_algo_type {
+ EM28XX_I2C_ALGO_EM28XX = 0,
+ EM28XX_I2C_ALGO_EM2800,
+ EM28XX_I2C_ALGO_EM25XX_BUS_B,
+};
+
+struct em28xx_i2c_bus {
+ struct em28xx *dev;
+
+ unsigned bus;
+ enum em28xx_i2c_algo_type algo_type;
+};
+
+
/* main device struct */
struct em28xx {
/* generic device properties */
@@ -484,6 +483,7 @@ struct em28xx {
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
enum em28xx_chip_id chip_id;
+ unsigned int is_em25xx:1; /* em25xx/em276x/7x/8x family bridge */
unsigned char disconnected:1; /* device has been diconnected */
@@ -491,8 +491,6 @@ struct em28xx {
struct v4l2_device v4l2_dev;
struct v4l2_ctrl_handler ctrl_handler;
- /* provides ac97 mute and volume overrides */
- struct v4l2_ctrl_handler ac97_ctrl_handler;
struct em28xx_board board;
/* Webcam specific fields */
@@ -511,8 +509,8 @@ struct em28xx {
unsigned int is_audio_only:1;
/* Controls audio streaming */
- struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
- atomic_t stream_started; /* stream should be running if true */
+ struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */
+ atomic_t stream_started; /* stream should be running if true */
struct em28xx_fmt *format;
@@ -530,9 +528,17 @@ struct em28xx {
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
int tda9887_conf;
+
/* i2c i/o */
- struct i2c_adapter i2c_adap;
- struct i2c_client i2c_client;
+ struct i2c_adapter i2c_adap[NUM_I2C_BUSES];
+ struct i2c_client i2c_client[NUM_I2C_BUSES];
+ struct em28xx_i2c_bus i2c_bus[NUM_I2C_BUSES];
+
+ unsigned char eeprom_addrwidth_16bit:1;
+ unsigned def_i2c_bus; /* Default I2C bus */
+ unsigned cur_i2c_bus; /* Current I2C bus */
+ struct rt_mutex i2c_bus_lock;
+
/* video for linux */
int users; /* user count for exclusive use */
int streaming_users; /* Number of actively streaming users */
@@ -584,7 +590,9 @@ struct em28xx {
/* resources in use */
unsigned int resources;
- unsigned char eedata[256];
+ /* eeprom content */
+ u8 *eedata;
+ u16 eedata_len;
/* Isoc control struct */
struct em28xx_dmaqueue vidq;
@@ -600,7 +608,7 @@ struct em28xx {
u8 analog_ep_isoc; /* address of isoc endpoint for analog */
u8 analog_ep_bulk; /* address of bulk endpoint for analog */
u8 dvb_ep_isoc; /* address of isoc endpoint for DVB */
- u8 dvb_ep_bulk; /* address of bulk endpoint for DVC */
+ u8 dvb_ep_bulk; /* address of bulk endpoint for DVB */
int alt; /* alternate setting */
int max_pkt_size; /* max packet size of the selected ep at alt */
int packet_multiplier; /* multiplier for wMaxPacketSize, used for
@@ -651,16 +659,12 @@ struct em28xx_ops {
};
/* Provided by em28xx-i2c.c */
-void em28xx_do_i2c_scan(struct em28xx *dev);
-int em28xx_i2c_register(struct em28xx *dev);
-int em28xx_i2c_unregister(struct em28xx *dev);
+void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus);
+int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
+ enum em28xx_i2c_algo_type algo_type);
+int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus);
/* Provided by em28xx-core.c */
-
-u32 em28xx_request_buffers(struct em28xx *dev, u32 count);
-void em28xx_queue_unusedframes(struct em28xx *dev);
-void em28xx_release_buffers(struct em28xx *dev);
-
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg);
@@ -693,7 +697,6 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
(struct em28xx *dev, struct urb *urb));
void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode);
void em28xx_stop_urbs(struct em28xx *dev);
-int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
void em28xx_wake_i2c(struct em28xx *dev);
@@ -712,16 +715,18 @@ int em28xx_stop_vbi_streaming(struct vb2_queue *vq);
extern const struct v4l2_ctrl_ops em28xx_ctrl_ops;
/* Provided by em28xx-cards.c */
-extern int em2800_variant_detect(struct usb_device *udev, int model);
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
-extern const unsigned int em28xx_bcount;
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_release_resources(struct em28xx *dev);
/* Provided by em28xx-vbi.c */
extern struct vb2_ops em28xx_vbi_qops;
+/* Provided by em28xx-camera.c */
+int em28xx_detect_sensor(struct em28xx *dev);
+int em28xx_init_camera(struct em28xx *dev);
+
/* printk macros */
#define em28xx_err(fmt, arg...) do {\
@@ -744,72 +749,6 @@ static inline int em28xx_compression_disable(struct em28xx *dev)
return em28xx_write_reg(dev, EM28XX_R26_COMPR, 0x00);
}
-static inline int em28xx_contrast_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R20_YGAIN) & 0x1f;
-}
-
-static inline int em28xx_brightness_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R21_YOFFSET);
-}
-
-static inline int em28xx_saturation_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R22_UVGAIN) & 0x1f;
-}
-
-static inline int em28xx_u_balance_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R23_UOFFSET);
-}
-
-static inline int em28xx_v_balance_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R24_VOFFSET);
-}
-
-static inline int em28xx_gamma_get(struct em28xx *dev)
-{
- return em28xx_read_reg(dev, EM28XX_R14_GAMMA) & 0x3f;
-}
-
-static inline int em28xx_contrast_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R20_YGAIN, &tmp, 1);
-}
-
-static inline int em28xx_brightness_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R21_YOFFSET, &tmp, 1);
-}
-
-static inline int em28xx_saturation_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R22_UVGAIN, &tmp, 1);
-}
-
-static inline int em28xx_u_balance_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R23_UOFFSET, &tmp, 1);
-}
-
-static inline int em28xx_v_balance_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R24_VOFFSET, &tmp, 1);
-}
-
-static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
-{
- u8 tmp = (u8) val;
- return em28xx_write_regs(dev, EM28XX_R14_GAMMA, &tmp, 1);
-}
-
/*FIXME: maxw should be dependent of alt mode */
static inline unsigned int norm_maxw(struct em28xx *dev)
{
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 10:20:20 +0300