summaryrefslogtreecommitdiff
path: root/drivers/media/rc/sir_ir.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/rc/sir_ir.c')
-rw-r--r--drivers/media/rc/sir_ir.c438
1 files changed, 0 insertions, 438 deletions
diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c
deleted file mode 100644
index 6ec96dc34586..000000000000
--- a/drivers/media/rc/sir_ir.c
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * IR SIR driver, (C) 2000 Milan Pikula <www@fornax.sk>
- *
- * sir_ir - Device driver for use with SIR (serial infra red)
- * mode of IrDA on many notebooks.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/serial_reg.h>
-#include <linux/ktime.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-
-#include <media/rc-core.h>
-
-/* SECTION: Definitions */
-#define PULSE '['
-
-/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/
-#define TIME_CONST (9000000ul / 115200ul)
-
-/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */
-#define SIR_TIMEOUT (HZ * 5 / 100)
-
-/* onboard sir ports are typically com3 */
-static int io = 0x3e8;
-static int irq = 4;
-static int threshold = 3;
-
-static DEFINE_SPINLOCK(timer_lock);
-static struct timer_list timerlist;
-/* time of last signal change detected */
-static ktime_t last;
-/* time of last UART data ready interrupt */
-static ktime_t last_intr_time;
-static int last_value;
-static struct rc_dev *rcdev;
-
-static struct platform_device *sir_ir_dev;
-
-static DEFINE_SPINLOCK(hardware_lock);
-
-/* SECTION: Prototypes */
-
-/* Communication with user-space */
-static void add_read_queue(int flag, unsigned long val);
-/* Hardware */
-static irqreturn_t sir_interrupt(int irq, void *dev_id);
-static void send_space(unsigned long len);
-static void send_pulse(unsigned long len);
-static int init_hardware(void);
-static void drop_hardware(void);
-/* Initialisation */
-
-static inline unsigned int sinp(int offset)
-{
- return inb(io + offset);
-}
-
-static inline void soutp(int offset, int value)
-{
- outb(value, io + offset);
-}
-
-/* SECTION: Communication with user-space */
-static int sir_tx_ir(struct rc_dev *dev, unsigned int *tx_buf,
- unsigned int count)
-{
- unsigned long flags;
- int i;
-
- local_irq_save(flags);
- for (i = 0; i < count;) {
- if (tx_buf[i])
- send_pulse(tx_buf[i]);
- i++;
- if (i >= count)
- break;
- if (tx_buf[i])
- send_space(tx_buf[i]);
- i++;
- }
- local_irq_restore(flags);
-
- return count;
-}
-
-static void add_read_queue(int flag, unsigned long val)
-{
- struct ir_raw_event ev = {};
-
- pr_debug("add flag %d with val %lu\n", flag, val);
-
- /*
- * statistically, pulses are ~TIME_CONST/2 too long. we could
- * maybe make this more exact, but this is good enough
- */
- if (flag) {
- /* pulse */
- if (val > TIME_CONST / 2)
- val -= TIME_CONST / 2;
- else /* should not ever happen */
- val = 1;
- ev.pulse = true;
- } else {
- val += TIME_CONST / 2;
- }
- ev.duration = val;
-
- ir_raw_event_store_with_filter(rcdev, &ev);
-}
-
-/* SECTION: Hardware */
-static void sir_timeout(struct timer_list *unused)
-{
- /*
- * if last received signal was a pulse, but receiving stopped
- * within the 9 bit frame, we need to finish this pulse and
- * simulate a signal change to from pulse to space. Otherwise
- * upper layers will receive two sequences next time.
- */
-
- unsigned long flags;
- unsigned long pulse_end;
-
- /* avoid interference with interrupt */
- spin_lock_irqsave(&timer_lock, flags);
- if (last_value) {
- /* clear unread bits in UART and restart */
- outb(UART_FCR_CLEAR_RCVR, io + UART_FCR);
- /* determine 'virtual' pulse end: */
- pulse_end = min_t(unsigned long,
- ktime_us_delta(last, last_intr_time),
- IR_MAX_DURATION);
- dev_dbg(&sir_ir_dev->dev, "timeout add %d for %lu usec\n",
- last_value, pulse_end);
- add_read_queue(last_value, pulse_end);
- last_value = 0;
- last = last_intr_time;
- }
- spin_unlock_irqrestore(&timer_lock, flags);
- ir_raw_event_handle(rcdev);
-}
-
-static irqreturn_t sir_interrupt(int irq, void *dev_id)
-{
- unsigned char data;
- ktime_t curr_time;
- unsigned long delt;
- unsigned long deltintr;
- unsigned long flags;
- int counter = 0;
- int iir, lsr;
-
- while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) {
- if (++counter > 256) {
- dev_err(&sir_ir_dev->dev, "Trapped in interrupt");
- break;
- }
-
- switch (iir & UART_IIR_ID) { /* FIXME toto treba preriedit */
- case UART_IIR_MSI:
- (void)inb(io + UART_MSR);
- break;
- case UART_IIR_RLSI:
- case UART_IIR_THRI:
- (void)inb(io + UART_LSR);
- break;
- case UART_IIR_RDI:
- /* avoid interference with timer */
- spin_lock_irqsave(&timer_lock, flags);
- do {
- del_timer(&timerlist);
- data = inb(io + UART_RX);
- curr_time = ktime_get();
- delt = min_t(unsigned long,
- ktime_us_delta(last, curr_time),
- IR_MAX_DURATION);
- deltintr = min_t(unsigned long,
- ktime_us_delta(last_intr_time,
- curr_time),
- IR_MAX_DURATION);
- dev_dbg(&sir_ir_dev->dev, "t %lu, d %d\n",
- deltintr, (int)data);
- /*
- * if nothing came in last X cycles,
- * it was gap
- */
- if (deltintr > TIME_CONST * threshold) {
- if (last_value) {
- dev_dbg(&sir_ir_dev->dev, "GAP\n");
- /* simulate signal change */
- add_read_queue(last_value,
- delt -
- deltintr);
- last_value = 0;
- last = last_intr_time;
- delt = deltintr;
- }
- }
- data = 1;
- if (data ^ last_value) {
- /*
- * deltintr > 2*TIME_CONST, remember?
- * the other case is timeout
- */
- add_read_queue(last_value,
- delt - TIME_CONST);
- last_value = data;
- last = curr_time;
- last = ktime_sub_us(last,
- TIME_CONST);
- }
- last_intr_time = curr_time;
- if (data) {
- /*
- * start timer for end of
- * sequence detection
- */
- timerlist.expires = jiffies +
- SIR_TIMEOUT;
- add_timer(&timerlist);
- }
-
- lsr = inb(io + UART_LSR);
- } while (lsr & UART_LSR_DR); /* data ready */
- spin_unlock_irqrestore(&timer_lock, flags);
- break;
- default:
- break;
- }
- }
- ir_raw_event_handle(rcdev);
- return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-static void send_space(unsigned long len)
-{
- usleep_range(len, len + 25);
-}
-
-static void send_pulse(unsigned long len)
-{
- long bytes_out = len / TIME_CONST;
-
- if (bytes_out == 0)
- bytes_out++;
-
- while (bytes_out--) {
- outb(PULSE, io + UART_TX);
- /* FIXME treba seriozne cakanie z char/serial.c */
- while (!(inb(io + UART_LSR) & UART_LSR_THRE))
- ;
- }
-}
-
-static int init_hardware(void)
-{
- u8 scratch, scratch2, scratch3;
- unsigned long flags;
-
- spin_lock_irqsave(&hardware_lock, flags);
-
- /*
- * This is a simple port existence test, borrowed from the autoconfig
- * function in drivers/tty/serial/8250/8250_port.c
- */
- scratch = sinp(UART_IER);
- soutp(UART_IER, 0);
-#ifdef __i386__
- outb(0xff, 0x080);
-#endif
- scratch2 = sinp(UART_IER) & 0x0f;
- soutp(UART_IER, 0x0f);
-#ifdef __i386__
- outb(0x00, 0x080);
-#endif
- scratch3 = sinp(UART_IER) & 0x0f;
- soutp(UART_IER, scratch);
- if (scratch2 != 0 || scratch3 != 0x0f) {
- /* we fail, there's nothing here */
- spin_unlock_irqrestore(&hardware_lock, flags);
- pr_err("port existence test failed, cannot continue\n");
- return -ENODEV;
- }
-
- /* reset UART */
- outb(0, io + UART_MCR);
- outb(0, io + UART_IER);
- /* init UART */
- /* set DLAB, speed = 115200 */
- outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR);
- outb(1, io + UART_DLL); outb(0, io + UART_DLM);
- /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */
- outb(UART_LCR_WLEN7, io + UART_LCR);
- /* FIFO operation */
- outb(UART_FCR_ENABLE_FIFO, io + UART_FCR);
- /* interrupts */
- /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */
- outb(UART_IER_RDI, io + UART_IER);
- /* turn on UART */
- outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2, io + UART_MCR);
- spin_unlock_irqrestore(&hardware_lock, flags);
-
- return 0;
-}
-
-static void drop_hardware(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&hardware_lock, flags);
-
- /* turn off interrupts */
- outb(0, io + UART_IER);
-
- spin_unlock_irqrestore(&hardware_lock, flags);
-}
-
-/* SECTION: Initialisation */
-static int sir_ir_probe(struct platform_device *dev)
-{
- int retval;
-
- rcdev = devm_rc_allocate_device(&sir_ir_dev->dev, RC_DRIVER_IR_RAW);
- if (!rcdev)
- return -ENOMEM;
-
- rcdev->device_name = "SIR IrDA port";
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->tx_ir = sir_tx_ir;
- rcdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->dev.parent = &sir_ir_dev->dev;
-
- timer_setup(&timerlist, sir_timeout, 0);
-
- /* get I/O port access and IRQ line */
- if (!devm_request_region(&sir_ir_dev->dev, io, 8, KBUILD_MODNAME)) {
- pr_err("i/o port 0x%.4x already in use.\n", io);
- return -EBUSY;
- }
- retval = devm_request_irq(&sir_ir_dev->dev, irq, sir_interrupt, 0,
- KBUILD_MODNAME, NULL);
- if (retval < 0) {
- pr_err("IRQ %d already in use.\n", irq);
- return retval;
- }
-
- retval = init_hardware();
- if (retval) {
- del_timer_sync(&timerlist);
- return retval;
- }
-
- pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq);
-
- retval = devm_rc_register_device(&sir_ir_dev->dev, rcdev);
- if (retval < 0)
- return retval;
-
- return 0;
-}
-
-static int sir_ir_remove(struct platform_device *dev)
-{
- drop_hardware();
- del_timer_sync(&timerlist);
- return 0;
-}
-
-static struct platform_driver sir_ir_driver = {
- .probe = sir_ir_probe,
- .remove = sir_ir_remove,
- .driver = {
- .name = "sir_ir",
- },
-};
-
-static int __init sir_ir_init(void)
-{
- int retval;
-
- retval = platform_driver_register(&sir_ir_driver);
- if (retval)
- return retval;
-
- sir_ir_dev = platform_device_alloc("sir_ir", 0);
- if (!sir_ir_dev) {
- retval = -ENOMEM;
- goto pdev_alloc_fail;
- }
-
- retval = platform_device_add(sir_ir_dev);
- if (retval)
- goto pdev_add_fail;
-
- return 0;
-
-pdev_add_fail:
- platform_device_put(sir_ir_dev);
-pdev_alloc_fail:
- platform_driver_unregister(&sir_ir_driver);
- return retval;
-}
-
-static void __exit sir_ir_exit(void)
-{
- platform_device_unregister(sir_ir_dev);
- platform_driver_unregister(&sir_ir_driver);
-}
-
-module_init(sir_ir_init);
-module_exit(sir_ir_exit);
-
-MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports");
-MODULE_AUTHOR("Milan Pikula");
-MODULE_LICENSE("GPL");
-
-module_param_hw(io, int, ioport, 0444);
-MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
-
-module_param_hw(irq, int, irq, 0444);
-MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
-
-module_param(threshold, int, 0444);
-MODULE_PARM_DESC(threshold, "space detection threshold (3)");
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 03:53:57 +0300