diff options
Diffstat (limited to 'drivers/media/platform/ti-vpe/cal-camerarx.c')
| -rw-r--r-- | drivers/media/platform/ti-vpe/cal-camerarx.c | 649 |
1 files changed, 649 insertions, 0 deletions
diff --git a/drivers/media/platform/ti-vpe/cal-camerarx.c b/drivers/media/platform/ti-vpe/cal-camerarx.c new file mode 100644 index 000000000000..806cbf175d39 --- /dev/null +++ b/drivers/media/platform/ti-vpe/cal-camerarx.c @@ -0,0 +1,649 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI Camera Access Layer (CAL) - CAMERARX + * + * Copyright (c) 2015-2020 Texas Instruments Inc. + * + * Authors: + * Benoit Parrot <bparrot@ti.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-subdev.h> + +#include "cal.h" +#include "cal_regs.h" + +/* ------------------------------------------------------------------ + * I/O Register Accessors + * ------------------------------------------------------------------ + */ + +static inline u32 camerarx_read(struct cal_camerarx *phy, u32 offset) +{ + return ioread32(phy->base + offset); +} + +static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val) +{ + iowrite32(val, phy->base + offset); +} + +/* ------------------------------------------------------------------ + * CAMERARX Management + * ------------------------------------------------------------------ + */ + +static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy) +{ + struct v4l2_ctrl *ctrl; + s64 rate; + + ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + phy_err(phy, "no pixel rate control in subdev: %s\n", + phy->sensor->name); + return -EPIPE; + } + + rate = v4l2_ctrl_g_ctrl_int64(ctrl); + phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate); + + return rate; +} + +static void cal_camerarx_lane_config(struct cal_camerarx *phy) +{ + u32 val = cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)); + u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK; + u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK; + struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 = + &phy->endpoint.bus.mipi_csi2; + int lane; + + cal_set_field(&val, mipi_csi2->clock_lane + 1, lane_mask); + cal_set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask); + for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) { + /* + * Every lane are one nibble apart starting with the + * clock followed by the data lanes so shift masks by 4. + */ + lane_mask <<= 4; + polarity_mask <<= 4; + cal_set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask); + cal_set_field(&val, mipi_csi2->lane_polarities[lane + 1], + polarity_mask); + } + + cal_write(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), val); + phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n", + phy->instance, val); +} + +static void cal_camerarx_enable(struct cal_camerarx *phy) +{ + u32 num_lanes = phy->cal->data->camerarx[phy->instance].num_lanes; + + regmap_field_write(phy->fields[F_CAMMODE], 0); + /* Always enable all lanes at the phy control level */ + regmap_field_write(phy->fields[F_LANEENABLE], (1 << num_lanes) - 1); + /* F_CSI_MODE is not present on every architecture */ + if (phy->fields[F_CSI_MODE]) + regmap_field_write(phy->fields[F_CSI_MODE], 1); + regmap_field_write(phy->fields[F_CTRLCLKEN], 1); +} + +void cal_camerarx_disable(struct cal_camerarx *phy) +{ + regmap_field_write(phy->fields[F_CTRLCLKEN], 0); +} + +/* + * TCLK values are OK at their reset values + */ +#define TCLK_TERM 0 +#define TCLK_MISS 1 +#define TCLK_SETTLE 14 + +static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate, + const struct cal_fmt *fmt) +{ + unsigned int reg0, reg1; + unsigned int ths_term, ths_settle; + unsigned int csi2_ddrclk_khz; + struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 = + &phy->endpoint.bus.mipi_csi2; + u32 num_lanes = mipi_csi2->num_data_lanes; + + /* DPHY timing configuration */ + + /* + * CSI-2 is DDR and we only count used lanes. + * + * csi2_ddrclk_khz = external_rate / 1000 + * / (2 * num_lanes) * fmt->bpp; + */ + csi2_ddrclk_khz = div_s64(external_rate * fmt->bpp, + 2 * num_lanes * 1000); + + phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz); + + /* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */ + ths_term = 20 * csi2_ddrclk_khz / 1000000; + phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term); + + /* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */ + ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4; + phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle); + + reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0); + cal_set_field(®0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE, + CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK); + cal_set_field(®0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK); + cal_set_field(®0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK); + + phy_dbg(1, phy, "CSI2_%d_REG0 = 0x%08x\n", phy->instance, reg0); + camerarx_write(phy, CAL_CSI2_PHY_REG0, reg0); + + reg1 = camerarx_read(phy, CAL_CSI2_PHY_REG1); + cal_set_field(®1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK); + cal_set_field(®1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK); + cal_set_field(®1, TCLK_MISS, + CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK); + cal_set_field(®1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK); + + phy_dbg(1, phy, "CSI2_%d_REG1 = 0x%08x\n", phy->instance, reg1); + camerarx_write(phy, CAL_CSI2_PHY_REG1, reg1); +} + +static void cal_camerarx_power(struct cal_camerarx *phy, bool enable) +{ + u32 target_state; + unsigned int i; + + target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON : + CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF; + + cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), + target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK); + + for (i = 0; i < 10; i++) { + u32 current_state; + + current_state = cal_read_field(phy->cal, + CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK); + + if (current_state == target_state) + break; + + usleep_range(1000, 1100); + } + + if (i == 10) + phy_err(phy, "Failed to power %s complexio\n", + enable ? "up" : "down"); +} + +static void cal_camerarx_wait_reset(struct cal_camerarx *phy) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(750); + while (time_before(jiffies, timeout)) { + if (cal_read_field(phy->cal, + CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) == + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED) + break; + usleep_range(500, 5000); + } + + if (cal_read_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) != + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED) + phy_err(phy, "Timeout waiting for Complex IO reset done\n"); +} + +static void cal_camerarx_wait_stop_state(struct cal_camerarx *phy) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(750); + while (time_before(jiffies, timeout)) { + if (cal_read_field(phy->cal, + CAL_CSI2_TIMING(phy->instance), + CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0) + break; + usleep_range(500, 5000); + } + + if (cal_read_field(phy->cal, CAL_CSI2_TIMING(phy->instance), + CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0) + phy_err(phy, "Timeout waiting for stop state\n"); +} + +int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt) +{ + s64 external_rate; + u32 sscounter; + u32 val; + int ret; + + external_rate = cal_camerarx_get_external_rate(phy); + if (external_rate < 0) + return external_rate; + + ret = v4l2_subdev_call(phy->sensor, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) { + phy_err(phy, "power on failed in subdev\n"); + return ret; + } + + /* + * CSI-2 PHY Link Initialization Sequence, according to the DRA74xP / + * DRA75xP / DRA76xP / DRA77xP TRM. The DRA71x / DRA72x and the AM65x / + * DRA80xM TRMs have a a slightly simplified sequence. + */ + + /* + * 1. Configure all CSI-2 low level protocol registers to be ready to + * receive signals/data from the CSI-2 PHY. + * + * i.-v. Configure the lanes position and polarity. + */ + cal_camerarx_lane_config(phy); + + /* + * vi.-vii. Configure D-PHY mode, enable the required lanes and + * enable the CAMERARX clock. + */ + cal_camerarx_enable(phy); + + /* + * 2. CSI PHY and link initialization sequence. + * + * a. Deassert the CSI-2 PHY reset. Do not wait for reset completion + * at this point, as it requires the external sensor to send the + * CSI-2 HS clock. + */ + cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL, + CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK); + phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n", + phy->instance, + cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance))); + + /* Dummy read to allow SCP reset to complete. */ + camerarx_read(phy, CAL_CSI2_PHY_REG0); + + /* Program the PHY timing parameters. */ + cal_camerarx_config(phy, external_rate, fmt); + + /* + * b. Assert the FORCERXMODE signal. + * + * The stop-state-counter is based on fclk cycles, and we always use + * the x16 and x4 settings, so stop-state-timeout = + * fclk-cycle * 16 * 4 * counter. + * + * Stop-state-timeout must be more than 100us as per CSI-2 spec, so we + * calculate a timeout that's 100us (rounding up). + */ + sscounter = DIV_ROUND_UP(clk_get_rate(phy->cal->fclk), 10000 * 16 * 4); + + val = cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)); + cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK); + cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK); + cal_set_field(&val, sscounter, + CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK); + cal_write(phy->cal, CAL_CSI2_TIMING(phy->instance), val); + phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n", + phy->instance, + cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance))); + + /* Assert the FORCERXMODE signal. */ + cal_write_field(phy->cal, CAL_CSI2_TIMING(phy->instance), + 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK); + phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n", + phy->instance, + cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance))); + + /* + * c. Connect pull-down on CSI-2 PHY link (using pad control). + * + * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not + * implemented. + */ + + /* + * d. Power up the CSI-2 PHY. + * e. Check whether the state status reaches the ON state. + */ + cal_camerarx_power(phy, true); + + /* + * Start the sensor to enable the CSI-2 HS clock. We can now wait for + * CSI-2 PHY reset to complete. + */ + ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1); + if (ret) { + v4l2_subdev_call(phy->sensor, core, s_power, 0); + phy_err(phy, "stream on failed in subdev\n"); + return ret; + } + + cal_camerarx_wait_reset(phy); + + /* f. Wait for STOPSTATE=1 for all enabled lane modules. */ + cal_camerarx_wait_stop_state(phy); + + phy_dbg(1, phy, "CSI2_%u_REG1 = 0x%08x (bits 31-28 should be set)\n", + phy->instance, camerarx_read(phy, CAL_CSI2_PHY_REG1)); + + /* + * g. Disable pull-down on CSI-2 PHY link (using pad control). + * + * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not + * implemented. + */ + + return 0; +} + +void cal_camerarx_stop(struct cal_camerarx *phy) +{ + unsigned int i; + int ret; + + cal_camerarx_power(phy, false); + + /* Assert Complex IO Reset */ + cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL, + CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK); + + /* Wait for power down completion */ + for (i = 0; i < 10; i++) { + if (cal_read_field(phy->cal, + CAL_CSI2_COMPLEXIO_CFG(phy->instance), + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) == + CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING) + break; + usleep_range(1000, 1100); + } + phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n", + phy->instance, + cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i, + (i >= 10) ? "(timeout)" : ""); + + /* Disable the phy */ + cal_camerarx_disable(phy); + + if (v4l2_subdev_call(phy->sensor, video, s_stream, 0)) + phy_err(phy, "stream off failed in subdev\n"); + + ret = v4l2_subdev_call(phy->sensor, core, s_power, 0); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + phy_err(phy, "power off failed in subdev\n"); +} + +/* + * Errata i913: CSI2 LDO Needs to be disabled when module is powered on + * + * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2 + * LDOs on the device are disabled if CSI-2 module is powered on + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304 + * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high + * current draw on the module supply in active mode. + * + * Errata does not apply when CSI-2 module is powered off + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0). + * + * SW Workaround: + * Set the following register bits to disable the LDO, + * which is essentially CSI2 REG10 bit 6: + * + * Core 0: 0x4845 B828 = 0x0000 0040 + * Core 1: 0x4845 B928 = 0x0000 0040 + */ +void cal_camerarx_i913_errata(struct cal_camerarx *phy) +{ + u32 reg10 = camerarx_read(phy, CAL_CSI2_PHY_REG10); + + cal_set_field(®10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK); + + phy_dbg(1, phy, "CSI2_%d_REG10 = 0x%08x\n", phy->instance, reg10); + camerarx_write(phy, CAL_CSI2_PHY_REG10, reg10); +} + +/* + * Enable the expected IRQ sources + */ +void cal_camerarx_enable_irqs(struct cal_camerarx *phy) +{ + u32 val; + + const u32 cio_err_mask = + CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK | + CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK | + CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK | + CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK; + + /* Enable CIO error irqs */ + cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), + CAL_HL_IRQ_CIO_MASK(phy->instance)); + cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance), + cio_err_mask); + + /* Always enable OCPO error */ + cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK); + + /* Enable IRQ_WDMA_END 0/1 */ + val = 0; + cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance)); + cal_write(phy->cal, CAL_HL_IRQENABLE_SET(1), val); + /* Enable IRQ_WDMA_START 0/1 */ + val = 0; + cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance)); + cal_write(phy->cal, CAL_HL_IRQENABLE_SET(2), val); + /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */ + cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0xFF000000); +} + +void cal_camerarx_disable_irqs(struct cal_camerarx *phy) +{ + u32 val; + + /* Disable CIO error irqs */ + cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0), + CAL_HL_IRQ_CIO_MASK(phy->instance)); + cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance), 0); + + /* Disable IRQ_WDMA_END 0/1 */ + val = 0; + cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance)); + cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(1), val); + /* Disable IRQ_WDMA_START 0/1 */ + val = 0; + cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance)); + cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(2), val); + /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */ + cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0); +} + +void cal_camerarx_ppi_enable(struct cal_camerarx *phy) +{ + cal_write(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), BIT(3)); + cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), + 1, CAL_CSI2_PPI_CTRL_IF_EN_MASK); +} + +void cal_camerarx_ppi_disable(struct cal_camerarx *phy) +{ + cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), + 0, CAL_CSI2_PPI_CTRL_IF_EN_MASK); +} + +static int cal_camerarx_regmap_init(struct cal_dev *cal, + struct cal_camerarx *phy) +{ + const struct cal_camerarx_data *phy_data; + unsigned int i; + + if (!cal->data) + return -EINVAL; + + phy_data = &cal->data->camerarx[phy->instance]; + + for (i = 0; i < F_MAX_FIELDS; i++) { + struct reg_field field = { + .reg = cal->syscon_camerrx_offset, + .lsb = phy_data->fields[i].lsb, + .msb = phy_data->fields[i].msb, + }; + + /* + * Here we update the reg offset with the + * value found in DT + */ + phy->fields[i] = devm_regmap_field_alloc(cal->dev, + cal->syscon_camerrx, + field); + if (IS_ERR(phy->fields[i])) { + cal_err(cal, "Unable to allocate regmap fields\n"); + return PTR_ERR(phy->fields[i]); + } + } + + return 0; +} + +static int cal_camerarx_parse_dt(struct cal_camerarx *phy) +{ + struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint; + struct device_node *ep_node; + char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2]; + unsigned int i; + int ret; + + /* + * Find the endpoint node for the port corresponding to the PHY + * instance, and parse its CSI-2-related properties. + */ + ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node, + phy->instance, 0); + if (!ep_node) { + /* + * The endpoint is not mandatory, not all PHY instances need to + * be connected in DT. + */ + phy_dbg(3, phy, "Port has no endpoint\n"); + return 0; + } + + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY; + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), endpoint); + if (ret < 0) { + phy_err(phy, "Failed to parse endpoint\n"); + goto done; + } + + for (i = 0; i < endpoint->bus.mipi_csi2.num_data_lanes; i++) { + unsigned int lane = endpoint->bus.mipi_csi2.data_lanes[i]; + + if (lane > 4) { + phy_err(phy, "Invalid position %u for data lane %u\n", + lane, i); + ret = -EINVAL; + goto done; + } + + data_lanes[i*2] = '0' + lane; + data_lanes[i*2+1] = ' '; + } + + data_lanes[i*2-1] = '\0'; + + phy_dbg(3, phy, + "CSI-2 bus: clock lane <%u>, data lanes <%s>, flags 0x%08x\n", + endpoint->bus.mipi_csi2.clock_lane, data_lanes, + endpoint->bus.mipi_csi2.flags); + + /* Retrieve the connected device and store it for later use. */ + phy->sensor_node = of_graph_get_remote_port_parent(ep_node); + if (!phy->sensor_node) { + phy_dbg(3, phy, "Can't get remote parent\n"); + ret = -EINVAL; + goto done; + } + + phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node); + +done: + of_node_put(ep_node); + return ret; +} + +struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal, + unsigned int instance) +{ + struct platform_device *pdev = to_platform_device(cal->dev); + struct cal_camerarx *phy; + int ret; + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + phy->cal = cal; + phy->instance = instance; + + phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + (instance == 0) ? + "cal_rx_core0" : + "cal_rx_core1"); + phy->base = devm_ioremap_resource(cal->dev, phy->res); + if (IS_ERR(phy->base)) { + cal_err(cal, "failed to ioremap\n"); + ret = PTR_ERR(phy->base); + goto error; + } + + cal_dbg(1, cal, "ioresource %s at %pa - %pa\n", + phy->res->name, &phy->res->start, &phy->res->end); + + ret = cal_camerarx_regmap_init(cal, phy); + if (ret) + goto error; + + ret = cal_camerarx_parse_dt(phy); + if (ret) + goto error; + + return phy; + +error: + kfree(phy); + return ERR_PTR(ret); +} + +void cal_camerarx_destroy(struct cal_camerarx *phy) +{ + if (!phy) + return; + + of_node_put(phy->sensor_node); + kfree(phy); +} |