diff options
Diffstat (limited to 'drivers/media/platform/omap24xxcam.c')
| -rw-r--r-- | drivers/media/platform/omap24xxcam.c | 1881 |
1 files changed, 1881 insertions, 0 deletions
diff --git a/drivers/media/platform/omap24xxcam.c b/drivers/media/platform/omap24xxcam.c new file mode 100644 index 000000000000..70f45c381318 --- /dev/null +++ b/drivers/media/platform/omap24xxcam.c @@ -0,0 +1,1881 @@ +/* + * drivers/media/platform/omap24xxcam.c + * + * OMAP 2 camera block driver. + * + * Copyright (C) 2004 MontaVista Software, Inc. + * Copyright (C) 2004 Texas Instruments. + * Copyright (C) 2007-2008 Nokia Corporation. + * + * Contact: Sakari Ailus <sakari.ailus@nokia.com> + * + * Based on code from Andy Lowe <source@mvista.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/videodev2.h> +#include <linux/pci.h> /* needed for videobufs */ +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/module.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> + +#include "omap24xxcam.h" + +#define OMAP24XXCAM_VERSION "0.0.1" + +#define RESET_TIMEOUT_NS 10000 + +static void omap24xxcam_reset(struct omap24xxcam_device *cam); +static int omap24xxcam_sensor_if_enable(struct omap24xxcam_device *cam); +static void omap24xxcam_device_unregister(struct v4l2_int_device *s); +static int omap24xxcam_remove(struct platform_device *pdev); + +/* module parameters */ +static int video_nr = -1; /* video device minor (-1 ==> auto assign) */ +/* + * Maximum amount of memory to use for capture buffers. + * Default is 4800KB, enough to double-buffer SXGA. + */ +static int capture_mem = 1280 * 960 * 2 * 2; + +static struct v4l2_int_device omap24xxcam; + +/* + * + * Clocks. + * + */ + +static void omap24xxcam_clock_put(struct omap24xxcam_device *cam) +{ + if (cam->ick != NULL && !IS_ERR(cam->ick)) + clk_put(cam->ick); + if (cam->fck != NULL && !IS_ERR(cam->fck)) + clk_put(cam->fck); + + cam->ick = cam->fck = NULL; +} + +static int omap24xxcam_clock_get(struct omap24xxcam_device *cam) +{ + int rval = 0; + + cam->fck = clk_get(cam->dev, "fck"); + if (IS_ERR(cam->fck)) { + dev_err(cam->dev, "can't get camera fck"); + rval = PTR_ERR(cam->fck); + omap24xxcam_clock_put(cam); + return rval; + } + + cam->ick = clk_get(cam->dev, "ick"); + if (IS_ERR(cam->ick)) { + dev_err(cam->dev, "can't get camera ick"); + rval = PTR_ERR(cam->ick); + omap24xxcam_clock_put(cam); + } + + return rval; +} + +static void omap24xxcam_clock_on(struct omap24xxcam_device *cam) +{ + clk_enable(cam->fck); + clk_enable(cam->ick); +} + +static void omap24xxcam_clock_off(struct omap24xxcam_device *cam) +{ + clk_disable(cam->fck); + clk_disable(cam->ick); +} + +/* + * + * Camera core + * + */ + +/* + * Set xclk. + * + * To disable xclk, use value zero. + */ +static void omap24xxcam_core_xclk_set(const struct omap24xxcam_device *cam, + u32 xclk) +{ + if (xclk) { + u32 divisor = CAM_MCLK / xclk; + + if (divisor == 1) + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, + CC_CTRL_XCLK, + CC_CTRL_XCLK_DIV_BYPASS); + else + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, + CC_CTRL_XCLK, divisor); + } else + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, + CC_CTRL_XCLK, CC_CTRL_XCLK_DIV_STABLE_LOW); +} + +static void omap24xxcam_core_hwinit(const struct omap24xxcam_device *cam) +{ + /* + * Setting the camera core AUTOIDLE bit causes problems with frame + * synchronization, so we will clear the AUTOIDLE bit instead. + */ + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_SYSCONFIG, + CC_SYSCONFIG_AUTOIDLE); + + /* program the camera interface DMA packet size */ + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL_DMA, + CC_CTRL_DMA_EN | (DMA_THRESHOLD / 4 - 1)); + + /* enable camera core error interrupts */ + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_IRQENABLE, + CC_IRQENABLE_FW_ERR_IRQ + | CC_IRQENABLE_FSC_ERR_IRQ + | CC_IRQENABLE_SSC_ERR_IRQ + | CC_IRQENABLE_FIFO_OF_IRQ); +} + +/* + * Enable the camera core. + * + * Data transfer to the camera DMA starts from next starting frame. + */ +static void omap24xxcam_core_enable(const struct omap24xxcam_device *cam) +{ + + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL, + cam->cc_ctrl); +} + +/* + * Disable camera core. + * + * The data transfer will be stopped immediately (CC_CTRL_CC_RST). The + * core internal state machines will be reset. Use + * CC_CTRL_CC_FRAME_TRIG instead if you want to transfer the current + * frame completely. + */ +static void omap24xxcam_core_disable(const struct omap24xxcam_device *cam) +{ + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_CTRL, + CC_CTRL_CC_RST); +} + +/* Interrupt service routine for camera core interrupts. */ +static void omap24xxcam_core_isr(struct omap24xxcam_device *cam) +{ + u32 cc_irqstatus; + const u32 cc_irqstatus_err = + CC_IRQSTATUS_FW_ERR_IRQ + | CC_IRQSTATUS_FSC_ERR_IRQ + | CC_IRQSTATUS_SSC_ERR_IRQ + | CC_IRQSTATUS_FIFO_UF_IRQ + | CC_IRQSTATUS_FIFO_OF_IRQ; + + cc_irqstatus = omap24xxcam_reg_in(cam->mmio_base + CC_REG_OFFSET, + CC_IRQSTATUS); + omap24xxcam_reg_out(cam->mmio_base + CC_REG_OFFSET, CC_IRQSTATUS, + cc_irqstatus); + + if (cc_irqstatus & cc_irqstatus_err + && !atomic_read(&cam->in_reset)) { + dev_dbg(cam->dev, "resetting camera, cc_irqstatus 0x%x\n", + cc_irqstatus); + omap24xxcam_reset(cam); + } +} + +/* + * + * videobuf_buffer handling. + * + * Memory for mmapped videobuf_buffers is not allocated + * conventionally, but by several kmalloc allocations and then + * creating the scatterlist on our own. User-space buffers are handled + * normally. + * + */ + +/* + * Free the memory-mapped buffer memory allocated for a + * videobuf_buffer and the associated scatterlist. + */ +static void omap24xxcam_vbq_free_mmap_buffer(struct videobuf_buffer *vb) +{ + struct videobuf_dmabuf *dma = videobuf_to_dma(vb); + size_t alloc_size; + struct page *page; + int i; + + if (dma->sglist == NULL) + return; + + i = dma->sglen; + while (i) { + i--; + alloc_size = sg_dma_len(&dma->sglist[i]); + page = sg_page(&dma->sglist[i]); + do { + ClearPageReserved(page++); + } while (alloc_size -= PAGE_SIZE); + __free_pages(sg_page(&dma->sglist[i]), + get_order(sg_dma_len(&dma->sglist[i]))); + } + + kfree(dma->sglist); + dma->sglist = NULL; +} + +/* Release all memory related to the videobuf_queue. */ +static void omap24xxcam_vbq_free_mmap_buffers(struct videobuf_queue *vbq) +{ + int i; + + mutex_lock(&vbq->vb_lock); + + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + if (NULL == vbq->bufs[i]) + continue; + if (V4L2_MEMORY_MMAP != vbq->bufs[i]->memory) + continue; + vbq->ops->buf_release(vbq, vbq->bufs[i]); + omap24xxcam_vbq_free_mmap_buffer(vbq->bufs[i]); + kfree(vbq->bufs[i]); + vbq->bufs[i] = NULL; + } + + mutex_unlock(&vbq->vb_lock); + + videobuf_mmap_free(vbq); +} + +/* + * Allocate physically as contiguous as possible buffer for video + * frame and allocate and build DMA scatter-gather list for it. + */ +static int omap24xxcam_vbq_alloc_mmap_buffer(struct videobuf_buffer *vb) +{ + unsigned int order; + size_t alloc_size, size = vb->bsize; /* vb->bsize is page aligned */ + struct page *page; + int max_pages, err = 0, i = 0; + struct videobuf_dmabuf *dma = videobuf_to_dma(vb); + + /* + * allocate maximum size scatter-gather list. Note this is + * overhead. We may not use as many entries as we allocate + */ + max_pages = vb->bsize >> PAGE_SHIFT; + dma->sglist = kcalloc(max_pages, sizeof(*dma->sglist), GFP_KERNEL); + if (dma->sglist == NULL) { + err = -ENOMEM; + goto out; + } + + while (size) { + order = get_order(size); + /* + * do not over-allocate even if we would get larger + * contiguous chunk that way + */ + if ((PAGE_SIZE << order) > size) + order--; + + /* try to allocate as many contiguous pages as possible */ + page = alloc_pages(GFP_KERNEL, order); + /* if allocation fails, try to allocate smaller amount */ + while (page == NULL) { + order--; + page = alloc_pages(GFP_KERNEL, order); + if (page == NULL && !order) { + err = -ENOMEM; + goto out; + } + } + size -= (PAGE_SIZE << order); + + /* append allocated chunk of pages into scatter-gather list */ + sg_set_page(&dma->sglist[i], page, PAGE_SIZE << order, 0); + dma->sglen++; + i++; + + alloc_size = (PAGE_SIZE << order); + + /* clear pages before giving them to user space */ + memset(page_address(page), 0, alloc_size); + + /* mark allocated pages reserved */ + do { + SetPageReserved(page++); + } while (alloc_size -= PAGE_SIZE); + } + /* + * REVISIT: not fully correct to assign nr_pages == sglen but + * video-buf is passing nr_pages for e.g. unmap_sg calls + */ + dma->nr_pages = dma->sglen; + dma->direction = PCI_DMA_FROMDEVICE; + + return 0; + +out: + omap24xxcam_vbq_free_mmap_buffer(vb); + return err; +} + +static int omap24xxcam_vbq_alloc_mmap_buffers(struct videobuf_queue *vbq, + unsigned int count) +{ + int i, err = 0; + struct omap24xxcam_fh *fh = + container_of(vbq, struct omap24xxcam_fh, vbq); + + mutex_lock(&vbq->vb_lock); + + for (i = 0; i < count; i++) { + err = omap24xxcam_vbq_alloc_mmap_buffer(vbq->bufs[i]); + if (err) + goto out; + dev_dbg(fh->cam->dev, "sglen is %d for buffer %d\n", + videobuf_to_dma(vbq->bufs[i])->sglen, i); + } + + mutex_unlock(&vbq->vb_lock); + + return 0; +out: + while (i) { + i--; + omap24xxcam_vbq_free_mmap_buffer(vbq->bufs[i]); + } + + mutex_unlock(&vbq->vb_lock); + + return err; +} + +/* + * This routine is called from interrupt context when a scatter-gather DMA + * transfer of a videobuf_buffer completes. + */ +static void omap24xxcam_vbq_complete(struct omap24xxcam_sgdma *sgdma, + u32 csr, void *arg) +{ + struct omap24xxcam_device *cam = + container_of(sgdma, struct omap24xxcam_device, sgdma); + struct omap24xxcam_fh *fh = cam->streaming->private_data; + struct videobuf_buffer *vb = (struct videobuf_buffer *)arg; + const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR + | CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR + | CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP; + unsigned long flags; + + spin_lock_irqsave(&cam->core_enable_disable_lock, flags); + if (--cam->sgdma_in_queue == 0) + omap24xxcam_core_disable(cam); + spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags); + + do_gettimeofday(&vb->ts); + vb->field_count = atomic_add_return(2, &fh->field_count); + if (csr & csr_error) { + vb->state = VIDEOBUF_ERROR; + if (!atomic_read(&fh->cam->in_reset)) { + dev_dbg(cam->dev, "resetting camera, csr 0x%x\n", csr); + omap24xxcam_reset(cam); + } + } else + vb->state = VIDEOBUF_DONE; + wake_up(&vb->done); +} + +static void omap24xxcam_vbq_release(struct videobuf_queue *vbq, + struct videobuf_buffer *vb) +{ + struct videobuf_dmabuf *dma = videobuf_to_dma(vb); + + /* wait for buffer, especially to get out of the sgdma queue */ + videobuf_waiton(vbq, vb, 0, 0); + if (vb->memory == V4L2_MEMORY_MMAP) { + dma_unmap_sg(vbq->dev, dma->sglist, dma->sglen, + dma->direction); + dma->direction = DMA_NONE; + } else { + videobuf_dma_unmap(vbq->dev, videobuf_to_dma(vb)); + videobuf_dma_free(videobuf_to_dma(vb)); + } + + vb->state = VIDEOBUF_NEEDS_INIT; +} + +/* + * Limit the number of available kernel image capture buffers based on the + * number requested, the currently selected image size, and the maximum + * amount of memory permitted for kernel capture buffers. + */ +static int omap24xxcam_vbq_setup(struct videobuf_queue *vbq, unsigned int *cnt, + unsigned int *size) +{ + struct omap24xxcam_fh *fh = vbq->priv_data; + + if (*cnt <= 0) + *cnt = VIDEO_MAX_FRAME; /* supply a default number of buffers */ + + if (*cnt > VIDEO_MAX_FRAME) + *cnt = VIDEO_MAX_FRAME; + + *size = fh->pix.sizeimage; + + /* accessing fh->cam->capture_mem is ok, it's constant */ + if (*size * *cnt > fh->cam->capture_mem) + *cnt = fh->cam->capture_mem / *size; + + return 0; +} + +static int omap24xxcam_dma_iolock(struct videobuf_queue *vbq, + struct videobuf_dmabuf *dma) +{ + int err = 0; + + dma->direction = PCI_DMA_FROMDEVICE; + if (!dma_map_sg(vbq->dev, dma->sglist, dma->sglen, dma->direction)) { + kfree(dma->sglist); + dma->sglist = NULL; + dma->sglen = 0; + err = -EIO; + } + + return err; +} + +static int omap24xxcam_vbq_prepare(struct videobuf_queue *vbq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct omap24xxcam_fh *fh = vbq->priv_data; + int err = 0; + + /* + * Accessing pix here is okay since it's constant while + * streaming is on (and we only get called then). + */ + if (vb->baddr) { + /* This is a userspace buffer. */ + if (fh->pix.sizeimage > vb->bsize) { + /* The buffer isn't big enough. */ + err = -EINVAL; + } else + vb->size = fh->pix.sizeimage; + } else { + if (vb->state != VIDEOBUF_NEEDS_INIT) { + /* + * We have a kernel bounce buffer that has + * already been allocated. + */ + if (fh->pix.sizeimage > vb->size) { + /* + * The image size has been changed to + * a larger size since this buffer was + * allocated, so we need to free and + * reallocate it. + */ + omap24xxcam_vbq_release(vbq, vb); + vb->size = fh->pix.sizeimage; + } + } else { + /* We need to allocate a new kernel bounce buffer. */ + vb->size = fh->pix.sizeimage; + } + } + + if (err) + return err; + + vb->width = fh->pix.width; + vb->height = fh->pix.height; + vb->field = field; + + if (vb->state == VIDEOBUF_NEEDS_INIT) { + if (vb->memory == V4L2_MEMORY_MMAP) + /* + * we have built the scatter-gather list by ourself so + * do the scatter-gather mapping as well + */ + err = omap24xxcam_dma_iolock(vbq, videobuf_to_dma(vb)); + else + err = videobuf_iolock(vbq, vb, NULL); + } + + if (!err) + vb->state = VIDEOBUF_PREPARED; + else + omap24xxcam_vbq_release(vbq, vb); + + return err; +} + +static void omap24xxcam_vbq_queue(struct videobuf_queue *vbq, + struct videobuf_buffer *vb) +{ + struct omap24xxcam_fh *fh = vbq->priv_data; + struct omap24xxcam_device *cam = fh->cam; + enum videobuf_state state = vb->state; + unsigned long flags; + int err; + + /* + * FIXME: We're marking the buffer active since we have no + * pretty way of marking it active exactly when the + * scatter-gather transfer starts. + */ + vb->state = VIDEOBUF_ACTIVE; + + err = omap24xxcam_sgdma_queue(&fh->cam->sgdma, + videobuf_to_dma(vb)->sglist, + videobuf_to_dma(vb)->sglen, vb->size, + omap24xxcam_vbq_complete, vb); + + if (!err) { + spin_lock_irqsave(&cam->core_enable_disable_lock, flags); + if (++cam->sgdma_in_queue == 1 + && !atomic_read(&cam->in_reset)) + omap24xxcam_core_enable(cam); + spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags); + } else { + /* + * Oops. We're not supposed to get any errors here. + * The only way we could get an error is if we ran out + * of scatter-gather DMA slots, but we are supposed to + * have at least as many scatter-gather DMA slots as + * video buffers so that can't happen. + */ + dev_err(cam->dev, "failed to queue a video buffer for dma!\n"); + dev_err(cam->dev, "likely a bug in the driver!\n"); + vb->state = state; + } +} + +static struct videobuf_queue_ops omap24xxcam_vbq_ops = { + .buf_setup = omap24xxcam_vbq_setup, + .buf_prepare = omap24xxcam_vbq_prepare, + .buf_queue = omap24xxcam_vbq_queue, + .buf_release = omap24xxcam_vbq_release, +}; + +/* + * + * OMAP main camera system + * + */ + +/* + * Reset camera block to power-on state. + */ +static void omap24xxcam_poweron_reset(struct omap24xxcam_device *cam) +{ + int max_loop = RESET_TIMEOUT_NS; + + /* Reset whole camera subsystem */ + omap24xxcam_reg_out(cam->mmio_base, + CAM_SYSCONFIG, + CAM_SYSCONFIG_SOFTRESET); + + /* Wait till it's finished */ + while (!(omap24xxcam_reg_in(cam->mmio_base, CAM_SYSSTATUS) + & CAM_SYSSTATUS_RESETDONE) + && --max_loop) { + ndelay(1); + } + + if (!(omap24xxcam_reg_in(cam->mmio_base, CAM_SYSSTATUS) + & CAM_SYSSTATUS_RESETDONE)) + dev_err(cam->dev, "camera soft reset timeout\n"); +} + +/* + * (Re)initialise the camera block. + */ +static void omap24xxcam_hwinit(struct omap24xxcam_device *cam) +{ + omap24xxcam_poweron_reset(cam); + + /* set the camera subsystem autoidle bit */ + omap24xxcam_reg_out(cam->mmio_base, CAM_SYSCONFIG, + CAM_SYSCONFIG_AUTOIDLE); + + /* set the camera MMU autoidle bit */ + omap24xxcam_reg_out(cam->mmio_base, + CAMMMU_REG_OFFSET + CAMMMU_SYSCONFIG, + CAMMMU_SYSCONFIG_AUTOIDLE); + + omap24xxcam_core_hwinit(cam); + + omap24xxcam_dma_hwinit(&cam->sgdma.dma); +} + +/* + * Callback for dma transfer stalling. + */ +static void omap24xxcam_stalled_dma_reset(unsigned long data) +{ + struct omap24xxcam_device *cam = (struct omap24xxcam_device *)data; + + if (!atomic_read(&cam->in_reset)) { + dev_dbg(cam->dev, "dma stalled, resetting camera\n"); + omap24xxcam_reset(cam); + } +} + +/* + * Stop capture. Mark we're doing a reset, stop DMA transfers and + * core. (No new scatter-gather transfers will be queued whilst + * in_reset is non-zero.) + * + * If omap24xxcam_capture_stop is called from several places at + * once, only the first call will have an effect. Similarly, the last + * call omap24xxcam_streaming_cont will have effect. + * + * Serialisation is ensured by using cam->core_enable_disable_lock. + */ +static void omap24xxcam_capture_stop(struct omap24xxcam_device *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->core_enable_disable_lock, flags); + + if (atomic_inc_return(&cam->in_reset) != 1) { + spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags); + return; + } + + omap24xxcam_core_disable(cam); + + spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags); + + omap24xxcam_sgdma_sync(&cam->sgdma); +} + +/* + * Reset and continue streaming. + * + * Note: Resetting the camera FIFO via the CC_RST bit in the CC_CTRL + * register is supposed to be sufficient to recover from a camera + * interface error, but it doesn't seem to be enough. If we only do + * that then subsequent image captures are out of sync by either one + * or two times DMA_THRESHOLD bytes. Resetting and re-initializing the + * entire camera subsystem prevents the problem with frame + * synchronization. + */ +static void omap24xxcam_capture_cont(struct omap24xxcam_device *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->core_enable_disable_lock, flags); + + if (atomic_read(&cam->in_reset) != 1) + goto out; + + omap24xxcam_hwinit(cam); + + omap24xxcam_sensor_if_enable(cam); + + omap24xxcam_sgdma_process(&cam->sgdma); + + if (cam->sgdma_in_queue) + omap24xxcam_core_enable(cam); + +out: + atomic_dec(&cam->in_reset); + spin_unlock_irqrestore(&cam->core_enable_disable_lock, flags); +} + +static ssize_t +omap24xxcam_streaming_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct omap24xxcam_device *cam = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", cam->streaming ? "active" : "inactive"); +} +static DEVICE_ATTR(streaming, S_IRUGO, omap24xxcam_streaming_show, NULL); + +/* + * Stop capture and restart it. I.e. reset the camera during use. + */ +static void omap24xxcam_reset(struct omap24xxcam_device *cam) +{ + omap24xxcam_capture_stop(cam); + omap24xxcam_capture_cont(cam); +} + +/* + * The main interrupt handler. + */ +static irqreturn_t omap24xxcam_isr(int irq, void *arg) +{ + struct omap24xxcam_device *cam = (struct omap24xxcam_device *)arg; + u32 irqstatus; + unsigned int irqhandled = 0; + + irqstatus = omap24xxcam_reg_in(cam->mmio_base, CAM_IRQSTATUS); + + if (irqstatus & + (CAM_IRQSTATUS_DMA_IRQ2 | CAM_IRQSTATUS_DMA_IRQ1 + | CAM_IRQSTATUS_DMA_IRQ0)) { + omap24xxcam_dma_isr(&cam->sgdma.dma); + irqhandled = 1; + } + if (irqstatus & CAM_IRQSTATUS_CC_IRQ) { + omap24xxcam_core_isr(cam); + irqhandled = 1; + } + if (irqstatus & CAM_IRQSTATUS_MMU_IRQ) + dev_err(cam->dev, "unhandled camera MMU interrupt!\n"); + + return IRQ_RETVAL(irqhandled); +} + +/* + * + * Sensor handling. + * + */ + +/* + * Enable the external sensor interface. Try to negotiate interface + * parameters with the sensor and start using the new ones. The calls + * to sensor_if_enable and sensor_if_disable need not to be balanced. + */ +static int omap24xxcam_sensor_if_enable(struct omap24xxcam_device *cam) +{ + int rval; + struct v4l2_ifparm p; + + rval = vidioc_int_g_ifparm(cam->sdev, &p); + if (rval) { + dev_err(cam->dev, "vidioc_int_g_ifparm failed with %d\n", rval); + return rval; + } + + cam->if_type = p.if_type; + + cam->cc_ctrl = CC_CTRL_CC_EN; + + switch (p.if_type) { + case V4L2_IF_TYPE_BT656: + if (p.u.bt656.frame_start_on_rising_vs) + cam->cc_ctrl |= CC_CTRL_NOBT_SYNCHRO; + if (p.u.bt656.bt_sync_correct) + cam->cc_ctrl |= CC_CTRL_BT_CORRECT; + if (p.u.bt656.swap) + cam->cc_ctrl |= CC_CTRL_PAR_ORDERCAM; + if (p.u.bt656.latch_clk_inv) + cam->cc_ctrl |= CC_CTRL_PAR_CLK_POL; + if (p.u.bt656.nobt_hs_inv) + cam->cc_ctrl |= CC_CTRL_NOBT_HS_POL; + if (p.u.bt656.nobt_vs_inv) + cam->cc_ctrl |= CC_CTRL_NOBT_VS_POL; + + switch (p.u.bt656.mode) { + case V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT: + cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT8; + break; + case V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT: + cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT10; + break; + case V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT: + cam->cc_ctrl |= CC_CTRL_PAR_MODE_NOBT12; + break; + case V4L2_IF_TYPE_BT656_MODE_BT_8BIT: + cam->cc_ctrl |= CC_CTRL_PAR_MODE_BT8; + break; + case V4L2_IF_TYPE_BT656_MODE_BT_10BIT: + cam->cc_ctrl |= CC_CTRL_PAR_MODE_BT10; + break; + default: + dev_err(cam->dev, + "bt656 interface mode %d not supported\n", + p.u.bt656.mode); + return -EINVAL; + } + /* + * The clock rate that the sensor wants has changed. + * We have to adjust the xclk from OMAP 2 side to + * match the sensor's wish as closely as possible. + */ + if (p.u.bt656.clock_curr != cam->if_u.bt656.xclk) { + u32 xclk = p.u.bt656.clock_curr; + u32 divisor; + + if (xclk == 0) + return -EINVAL; + + if (xclk > CAM_MCLK) + xclk = CAM_MCLK; + + divisor = CAM_MCLK / xclk; + if (divisor * xclk < CAM_MCLK) + divisor++; + if (CAM_MCLK / divisor < p.u.bt656.clock_min + && divisor > 1) + divisor--; + if (divisor > 30) + divisor = 30; + + xclk = CAM_MCLK / divisor; + + if (xclk < p.u.bt656.clock_min + || xclk > p.u.bt656.clock_max) + return -EINVAL; + + cam->if_u.bt656.xclk = xclk; + } + omap24xxcam_core_xclk_set(cam, cam->if_u.bt656.xclk); + break; + default: + /* FIXME: how about other interfaces? */ + dev_err(cam->dev, "interface type %d not supported\n", + p.if_type); + return -EINVAL; + } + + return 0; +} + +static void omap24xxcam_sensor_if_disable(const struct omap24xxcam_device *cam) +{ + switch (cam->if_type) { + case V4L2_IF_TYPE_BT656: + omap24xxcam_core_xclk_set(cam, 0); + break; + } +} + +/* + * Initialise the sensor hardware. + */ +static int omap24xxcam_sensor_init(struct omap24xxcam_device *cam) +{ + int err = 0; + struct v4l2_int_device *sdev = cam->sdev; + + omap24xxcam_clock_on(cam); + err = omap24xxcam_sensor_if_enable(cam); + if (err) { + dev_err(cam->dev, "sensor interface could not be enabled at " + "initialisation, %d\n", err); + cam->sdev = NULL; + goto out; + } + + /* power up sensor during sensor initialization */ + vidioc_int_s_power(sdev, 1); + + err = vidioc_int_dev_init(sdev); + if (err) { + dev_err(cam->dev, "cannot initialize sensor, error %d\n", err); + /* Sensor init failed --- it's nonexistent to us! */ + cam->sdev = NULL; + goto out; + } + + dev_info(cam->dev, "sensor is %s\n", sdev->name); + +out: + omap24xxcam_sensor_if_disable(cam); + omap24xxcam_clock_off(cam); + + vidioc_int_s_power(sdev, 0); + + return err; +} + +static void omap24xxcam_sensor_exit(struct omap24xxcam_device *cam) +{ + if (cam->sdev) + vidioc_int_dev_exit(cam->sdev); +} + +static void omap24xxcam_sensor_disable(struct omap24xxcam_device *cam) +{ + omap24xxcam_sensor_if_disable(cam); + omap24xxcam_clock_off(cam); + vidioc_int_s_power(cam->sdev, 0); +} + +/* + * Power-up and configure camera sensor. It's ready for capturing now. + */ +static int omap24xxcam_sensor_enable(struct omap24xxcam_device *cam) +{ + int rval; + + omap24xxcam_clock_on(cam); + + omap24xxcam_sensor_if_enable(cam); + + rval = vidioc_int_s_power(cam->sdev, 1); + if (rval) + goto out; + + rval = vidioc_int_init(cam->sdev); + if (rval) + goto out; + + return 0; + +out: + omap24xxcam_sensor_disable(cam); + + return rval; +} + +static void omap24xxcam_sensor_reset_work(struct work_struct *work) +{ + struct omap24xxcam_device *cam = + container_of(work, struct omap24xxcam_device, + sensor_reset_work); + + if (atomic_read(&cam->reset_disable)) + return; + + omap24xxcam_capture_stop(cam); + + if (vidioc_int_reset(cam->sdev) == 0) { + vidioc_int_init(cam->sdev); + } else { + /* Can't reset it by vidioc_int_reset. */ + omap24xxcam_sensor_disable(cam); + omap24xxcam_sensor_enable(cam); + } + + omap24xxcam_capture_cont(cam); +} + +/* + * + * IOCTL interface. + * + */ + +static int vidioc_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + + strlcpy(cap->driver, CAM_NAME, sizeof(cap->driver)); + strlcpy(cap->card, cam->vfd->name, sizeof(cap->card)); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + rval = vidioc_int_enum_fmt_cap(cam->sdev, f); + + return rval; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + rval = vidioc_int_g_fmt_cap(cam->sdev, f); + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + if (cam->streaming) { + rval = -EBUSY; + goto out; + } + + rval = vidioc_int_s_fmt_cap(cam->sdev, f); + +out: + mutex_unlock(&cam->mutex); + + if (!rval) { + mutex_lock(&ofh->vbq.vb_lock); + ofh->pix = f->fmt.pix; + mutex_unlock(&ofh->vbq.vb_lock); + } + + memset(f, 0, sizeof(*f)); + vidioc_g_fmt_vid_cap(file, fh, f); + + return rval; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + rval = vidioc_int_try_fmt_cap(cam->sdev, f); + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *b) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + if (cam->streaming) { + mutex_unlock(&cam->mutex); + return -EBUSY; + } + + omap24xxcam_vbq_free_mmap_buffers(&ofh->vbq); + mutex_unlock(&cam->mutex); + + rval = videobuf_reqbufs(&ofh->vbq, b); + + /* + * Either videobuf_reqbufs failed or the buffers are not + * memory-mapped (which would need special attention). + */ + if (rval < 0 || b->memory != V4L2_MEMORY_MMAP) + goto out; + + rval = omap24xxcam_vbq_alloc_mmap_buffers(&ofh->vbq, rval); + if (rval) + omap24xxcam_vbq_free_mmap_buffers(&ofh->vbq); + +out: + return rval; +} + +static int vidioc_querybuf(struct file *file, void *fh, + struct v4l2_buffer *b) +{ + struct omap24xxcam_fh *ofh = fh; + + return videobuf_querybuf(&ofh->vbq, b); +} + +static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct omap24xxcam_fh *ofh = fh; + + return videobuf_qbuf(&ofh->vbq, b); +} + +static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + struct videobuf_buffer *vb; + int rval; + +videobuf_dqbuf_again: + rval = videobuf_dqbuf(&ofh->vbq, b, file->f_flags & O_NONBLOCK); + if (rval) + goto out; + + vb = ofh->vbq.bufs[b->index]; + + mutex_lock(&cam->mutex); + /* _needs_reset returns -EIO if reset is required. */ + rval = vidioc_int_g_needs_reset(cam->sdev, (void *)vb->baddr); + mutex_unlock(&cam->mutex); + if (rval == -EIO) + schedule_work(&cam->sensor_reset_work); + else + rval = 0; + +out: + /* + * This is a hack. We don't want to show -EIO to the user + * space. Requeue the buffer and try again if we're not doing + * this in non-blocking mode. + */ + if (rval == -EIO) { + videobuf_qbuf(&ofh->vbq, b); + if (!(file->f_flags & O_NONBLOCK)) + goto videobuf_dqbuf_again; + /* + * We don't have a videobuf_buffer now --- maybe next + * time... + */ + rval = -EAGAIN; + } + + return rval; +} + +static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + if (cam->streaming) { + rval = -EBUSY; + goto out; + } + + rval = omap24xxcam_sensor_if_enable(cam); + if (rval) { + dev_dbg(cam->dev, "vidioc_int_g_ifparm failed\n"); + goto out; + } + + rval = videobuf_streamon(&ofh->vbq); + if (!rval) { + cam->streaming = file; + sysfs_notify(&cam->dev->kobj, NULL, "streaming"); + } + +out: + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + struct videobuf_queue *q = &ofh->vbq; + int rval; + + atomic_inc(&cam->reset_disable); + + flush_work(&cam->sensor_reset_work); + + rval = videobuf_streamoff(q); + if (!rval) { + mutex_lock(&cam->mutex); + cam->streaming = NULL; + mutex_unlock(&cam->mutex); + sysfs_notify(&cam->dev->kobj, NULL, "streaming"); + } + + atomic_dec(&cam->reset_disable); + + return rval; +} + +static int vidioc_enum_input(struct file *file, void *fh, + struct v4l2_input *inp) +{ + if (inp->index > 0) + return -EINVAL; + + strlcpy(inp->name, "camera", sizeof(inp->name)); + inp->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + + return 0; +} + +static int vidioc_s_input(struct file *file, void *fh, unsigned int i) +{ + if (i > 0) + return -EINVAL; + + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *fh, + struct v4l2_queryctrl *a) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + rval = vidioc_int_queryctrl(cam->sdev, a); + + return rval; +} + +static int vidioc_g_ctrl(struct file *file, void *fh, + struct v4l2_control *a) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + rval = vidioc_int_g_ctrl(cam->sdev, a); + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_s_ctrl(struct file *file, void *fh, + struct v4l2_control *a) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + rval = vidioc_int_s_ctrl(cam->sdev, a); + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) { + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + int rval; + + mutex_lock(&cam->mutex); + rval = vidioc_int_g_parm(cam->sdev, a); + mutex_unlock(&cam->mutex); + + return rval; +} + +static int vidioc_s_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct omap24xxcam_fh *ofh = fh; + struct omap24xxcam_device *cam = ofh->cam; + struct v4l2_streamparm old_streamparm; + int rval; + + mutex_lock(&cam->mutex); + if (cam->streaming) { + rval = -EBUSY; + goto out; + } + + old_streamparm.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + rval = vidioc_int_g_parm(cam->sdev, &old_streamparm); + if (rval) + goto out; + + rval = vidioc_int_s_parm(cam->sdev, a); + if (rval) + goto out; + + rval = omap24xxcam_sensor_if_enable(cam); + /* + * Revert to old streaming parameters if enabling sensor + * interface with the new ones failed. + */ + if (rval) + vidioc_int_s_parm(cam->sdev, &old_streamparm); + +out: + mutex_unlock(&cam->mutex); + + return rval; +} + +/* + * + * File operations. + * + */ + +static unsigned int omap24xxcam_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct omap24xxcam_fh *fh = file->private_data; + struct omap24xxcam_device *cam = fh->cam; + struct videobuf_buffer *vb; + + mutex_lock(&cam->mutex); + if (cam->streaming != file) { + mutex_unlock(&cam->mutex); + return POLLERR; + } + mutex_unlock(&cam->mutex); + + mutex_lock(&fh->vbq.vb_lock); + if (list_empty(&fh->vbq.stream)) { + mutex_unlock(&fh->vbq.vb_lock); + return POLLERR; + } + vb = list_entry(fh->vbq.stream.next, struct videobuf_buffer, stream); + mutex_unlock(&fh->vbq.vb_lock); + + poll_wait(file, &vb->done, wait); + + if (vb->state == VIDEOBUF_DONE || vb->state == VIDEOBUF_ERROR) + return POLLIN | POLLRDNORM; + + return 0; +} + +static int omap24xxcam_mmap_buffers(struct file *file, + struct vm_area_struct *vma) +{ + struct omap24xxcam_fh *fh = file->private_data; + struct omap24xxcam_device *cam = fh->cam; + struct videobuf_queue *vbq = &fh->vbq; + unsigned int first, last, size, i, j; + int err = 0; + + mutex_lock(&cam->mutex); + if (cam->streaming) { + mutex_unlock(&cam->mutex); + return -EBUSY; + } + mutex_unlock(&cam->mutex); + mutex_lock(&vbq->vb_lock); + + /* look for first buffer to map */ + for (first = 0; first < VIDEO_MAX_FRAME; first++) { + if (NULL == vbq->bufs[first]) + continue; + if (V4L2_MEMORY_MMAP != vbq->bufs[first]->memory) + continue; + if (vbq->bufs[first]->boff == (vma->vm_pgoff << PAGE_SHIFT)) + break; + } + + /* look for last buffer to map */ + for (size = 0, last = first; last < VIDEO_MAX_FRAME; last++) { + if (NULL == vbq->bufs[last]) + continue; + if (V4L2_MEMORY_MMAP != vbq->bufs[last]->memory) + continue; + size += vbq->bufs[last]->bsize; + if (size == (vma->vm_end - vma->vm_start)) + break; + } + + size = 0; + for (i = first; i <= last && i < VIDEO_MAX_FRAME; i++) { + struct videobuf_dmabuf *dma = videobuf_to_dma(vbq->bufs[i]); + + for (j = 0; j < dma->sglen; j++) { + err = remap_pfn_range( + vma, vma->vm_start + size, + page_to_pfn(sg_page(&dma->sglist[j])), + sg_dma_len(&dma->sglist[j]), vma->vm_page_prot); + if (err) + goto out; + size += sg_dma_len(&dma->sglist[j]); + } + } + +out: + mutex_unlock(&vbq->vb_lock); + + return err; +} + +static int omap24xxcam_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct omap24xxcam_fh *fh = file->private_data; + int rval; + + /* let the video-buf mapper check arguments and set-up structures */ + rval = videobuf_mmap_mapper(&fh->vbq, vma); + if (rval) + return rval; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + /* do mapping to our allocated buffers */ + rval = omap24xxcam_mmap_buffers(file, vma); + /* + * In case of error, free vma->vm_private_data allocated by + * videobuf_mmap_mapper. + */ + if (rval) + kfree(vma->vm_private_data); + + return rval; +} + +static int omap24xxcam_open(struct file *file) +{ + struct omap24xxcam_device *cam = omap24xxcam.priv; + struct omap24xxcam_fh *fh; + struct v4l2_format format; + + if (!cam || !cam->vfd) + return -ENODEV; + + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (fh == NULL) + return -ENOMEM; + + mutex_lock(&cam->mutex); + if (cam->sdev == NULL || !try_module_get(cam->sdev->module)) { + mutex_unlock(&cam->mutex); + goto out_try_module_get; + } + + if (atomic_inc_return(&cam->users) == 1) { + omap24xxcam_hwinit(cam); + if (omap24xxcam_sensor_enable(cam)) { + mutex_unlock(&cam->mutex); + goto out_omap24xxcam_sensor_enable; + } + } + mutex_unlock(&cam->mutex); + + fh->cam = cam; + mutex_lock(&cam->mutex); + vidioc_int_g_fmt_cap(cam->sdev, &format); + mutex_unlock(&cam->mutex); + /* FIXME: how about fh->pix when there are more users? */ + fh->pix = format.fmt.pix; + + file->private_data = fh; + + spin_lock_init(&fh->vbq_lock); + + videobuf_queue_sg_init(&fh->vbq, &omap24xxcam_vbq_ops, NULL, + &fh->vbq_lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_NONE, + sizeof(struct videobuf_buffer), fh, NULL); + + return 0; + +out_omap24xxcam_sensor_enable: + omap24xxcam_poweron_reset(cam); + module_put(cam->sdev->module); + +out_try_module_get: + kfree(fh); + + return -ENODEV; +} + +static int omap24xxcam_release(struct file *file) +{ + struct omap24xxcam_fh *fh = file->private_data; + struct omap24xxcam_device *cam = fh->cam; + + atomic_inc(&cam->reset_disable); + + flush_work(&cam->sensor_reset_work); + + /* stop streaming capture */ + videobuf_streamoff(&fh->vbq); + + mutex_lock(&cam->mutex); + if (cam->streaming == file) { + cam->streaming = NULL; + mutex_unlock(&cam->mutex); + sysfs_notify(&cam->dev->kobj, NULL, "streaming"); + } else { + mutex_unlock(&cam->mutex); + } + + atomic_dec(&cam->reset_disable); + + omap24xxcam_vbq_free_mmap_buffers(&fh->vbq); + + /* + * Make sure the reset work we might have scheduled is not + * pending! It may be run *only* if we have users. (And it may + * not be scheduled anymore since streaming is already + * disabled.) + */ + flush_work(&cam->sensor_reset_work); + + mutex_lock(&cam->mutex); + if (atomic_dec_return(&cam->users) == 0) { + omap24xxcam_sensor_disable(cam); + omap24xxcam_poweron_reset(cam); + } + mutex_unlock(&cam->mutex); + + file->private_data = NULL; + + module_put(cam->sdev->module); + kfree(fh); + + return 0; +} + +static struct v4l2_file_operations omap24xxcam_fops = { + .ioctl = video_ioctl2, + .poll = omap24xxcam_poll, + .mmap = omap24xxcam_mmap, + .open = omap24xxcam_open, + .release = omap24xxcam_release, +}; + +/* + * + * Power management. + * + */ + +#ifdef CONFIG_PM +static int omap24xxcam_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct omap24xxcam_device *cam = platform_get_drvdata(pdev); + + if (atomic_read(&cam->users) == 0) + return 0; + + if (!atomic_read(&cam->reset_disable)) + omap24xxcam_capture_stop(cam); + + omap24xxcam_sensor_disable(cam); + omap24xxcam_poweron_reset(cam); + + return 0; +} + +static int omap24xxcam_resume(struct platform_device *pdev) +{ + struct omap24xxcam_device *cam = platform_get_drvdata(pdev); + + if (atomic_read(&cam->users) == 0) + return 0; + + omap24xxcam_hwinit(cam); + omap24xxcam_sensor_enable(cam); + + if (!atomic_read(&cam->reset_disable)) + omap24xxcam_capture_cont(cam); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct v4l2_ioctl_ops omap24xxcam_ioctl_fops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_s_parm = vidioc_s_parm, +}; + +/* + * + * Camera device (i.e. /dev/video). + * + */ + +static int omap24xxcam_device_register(struct v4l2_int_device *s) +{ + struct omap24xxcam_device *cam = s->u.slave->master->priv; + struct video_device *vfd; + int rval; + + /* We already have a slave. */ + if (cam->sdev) + return -EBUSY; + + cam->sdev = s; + + if (device_create_file(cam->dev, &dev_attr_streaming) != 0) { + dev_err(cam->dev, "could not register sysfs entry\n"); + rval = -EBUSY; + goto err; + } + + /* initialize the video_device struct */ + vfd = cam->vfd = video_device_alloc(); + if (!vfd) { + dev_err(cam->dev, "could not allocate video device struct\n"); + rval = -ENOMEM; + goto err; + } + vfd->release = video_device_release; + + vfd->parent = cam->dev; + + strlcpy(vfd->name, CAM_NAME, sizeof(vfd->name)); + vfd->fops = &omap24xxcam_fops; + vfd->ioctl_ops = &omap24xxcam_ioctl_fops; + + omap24xxcam_hwinit(cam); + + rval = omap24xxcam_sensor_init(cam); + if (rval) + goto err; + + if (video_register_device(vfd, VFL_TYPE_GRABBER, video_nr) < 0) { + dev_err(cam->dev, "could not register V4L device\n"); + rval = -EBUSY; + goto err; + } + + omap24xxcam_poweron_reset(cam); + + dev_info(cam->dev, "registered device %s\n", + video_device_node_name(vfd)); + + return 0; + +err: + omap24xxcam_device_unregister(s); + + return rval; +} + +static void omap24xxcam_device_unregister(struct v4l2_int_device *s) +{ + struct omap24xxcam_device *cam = s->u.slave->master->priv; + + omap24xxcam_sensor_exit(cam); + + if (cam->vfd) { + if (!video_is_registered(cam->vfd)) { + /* + * The device was never registered, so release the + * video_device struct directly. + */ + video_device_release(cam->vfd); + } else { + /* + * The unregister function will release the + * video_device struct as well as + * unregistering it. + */ + video_unregister_device(cam->vfd); + } + cam->vfd = NULL; + } + + device_remove_file(cam->dev, &dev_attr_streaming); + + cam->sdev = NULL; +} + +static struct v4l2_int_master omap24xxcam_master = { + .attach = omap24xxcam_device_register, + .detach = omap24xxcam_device_unregister, +}; + +static struct v4l2_int_device omap24xxcam = { + .module = THIS_MODULE, + .name = CAM_NAME, + .type = v4l2_int_type_master, + .u = { + .master = &omap24xxcam_master + }, +}; + +/* + * + * Driver initialisation and deinitialisation. + * + */ + +static int __devinit omap24xxcam_probe(struct platform_device *pdev) +{ + struct omap24xxcam_device *cam; + struct resource *mem; + int irq; + + cam = kzalloc(sizeof(*cam), GFP_KERNEL); + if (!cam) { + dev_err(&pdev->dev, "could not allocate memory\n"); + goto err; + } + + platform_set_drvdata(pdev, cam); + + cam->dev = &pdev->dev; + + /* + * Impose a lower limit on the amount of memory allocated for + * capture. We require at least enough memory to double-buffer + * QVGA (300KB). + */ + if (capture_mem < 320 * 240 * 2 * 2) + capture_mem = 320 * 240 * 2 * 2; + cam->capture_mem = capture_mem; + + /* request the mem region for the camera registers */ + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(cam->dev, "no mem resource?\n"); + goto err; + } + if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { + dev_err(cam->dev, + "cannot reserve camera register I/O region\n"); + goto err; + } + cam->mmio_base_phys = mem->start; + cam->mmio_size = resource_size(mem); + + /* map the region */ + cam->mmio_base = ioremap_nocache(cam->mmio_base_phys, cam->mmio_size); + if (!cam->mmio_base) { + dev_err(cam->dev, "cannot map camera register I/O region\n"); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(cam->dev, "no irq for camera?\n"); + goto err; + } + + /* install the interrupt service routine */ + if (request_irq(irq, omap24xxcam_isr, 0, CAM_NAME, cam)) { + dev_err(cam->dev, + "could not install interrupt service routine\n"); + goto err; + } + cam->irq = irq; + + if (omap24xxcam_clock_get(cam)) + goto err; + + INIT_WORK(&cam->sensor_reset_work, omap24xxcam_sensor_reset_work); + + mutex_init(&cam->mutex); + spin_lock_init(&cam->core_enable_disable_lock); + + omap24xxcam_sgdma_init(&cam->sgdma, + cam->mmio_base + CAMDMA_REG_OFFSET, + omap24xxcam_stalled_dma_reset, + (unsigned long)cam); + + omap24xxcam.priv = cam; + + if (v4l2_int_device_register(&omap24xxcam)) + goto err; + + return 0; + +err: + omap24xxcam_remove(pdev); + return -ENODEV; +} + +static int omap24xxcam_remove(struct platform_device *pdev) +{ + struct omap24xxcam_device *cam = platform_get_drvdata(pdev); + + if (!cam) + return 0; + + if (omap24xxcam.priv != NULL) + v4l2_int_device_unregister(&omap24xxcam); + omap24xxcam.priv = NULL; + + omap24xxcam_clock_put(cam); + + if (cam->irq) { + free_irq(cam->irq, cam); + cam->irq = 0; + } + + if (cam->mmio_base) { + iounmap((void *)cam->mmio_base); + cam->mmio_base = 0; + } + + if (cam->mmio_base_phys) { + release_mem_region(cam->mmio_base_phys, cam->mmio_size); + cam->mmio_base_phys = 0; + } + + kfree(cam); + + return 0; +} + +static struct platform_driver omap24xxcam_driver = { + .probe = omap24xxcam_probe, + .remove = omap24xxcam_remove, +#ifdef CONFIG_PM + .suspend = omap24xxcam_suspend, + .resume = omap24xxcam_resume, +#endif + .driver = { + .name = CAM_NAME, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(omap24xxcam_driver); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); +MODULE_DESCRIPTION("OMAP24xx Video for Linux camera driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(OMAP24XXCAM_VERSION); +module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr, + "Minor number for video device (-1 ==> auto assign)"); +module_param(capture_mem, int, 0); +MODULE_PARM_DESC(capture_mem, "Maximum amount of memory for capture " + "buffers (default 4800kiB)"); |