diff options
Diffstat (limited to 'drivers/media/pci/zoran/zr36060.c')
| -rw-r--r-- | drivers/media/pci/zoran/zr36060.c | 1010 |
1 files changed, 1010 insertions, 0 deletions
diff --git a/drivers/media/pci/zoran/zr36060.c b/drivers/media/pci/zoran/zr36060.c new file mode 100644 index 000000000000..f08546fe2234 --- /dev/null +++ b/drivers/media/pci/zoran/zr36060.c @@ -0,0 +1,1010 @@ +/* + * Zoran ZR36060 basic configuration functions + * + * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be> + * + * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $ + * + * ------------------------------------------------------------------------ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ------------------------------------------------------------------------ + */ + +#define ZR060_VERSION "v0.7" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <linux/types.h> +#include <linux/wait.h> + +/* I/O commands, error codes */ +#include <asm/io.h> + +/* headerfile of this module */ +#include "zr36060.h" + +/* codec io API */ +#include "videocodec.h" + +/* it doesn't make sense to have more than 20 or so, + just to prevent some unwanted loops */ +#define MAX_CODECS 20 + +/* amount of chips attached via this driver */ +static int zr36060_codecs; + +static bool low_bitrate; +module_param(low_bitrate, bool, 0); +MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); + +/* debugging is available via module parameter */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-4)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format, ##args); \ + } while (0) + +/* ========================================================================= + Local hardware I/O functions: + + read/write via codec layer (registers are located in the master device) + ========================================================================= */ + +/* read and write functions */ +static u8 +zr36060_read (struct zr36060 *ptr, + u16 reg) +{ + u8 value = 0; + + // just in case something is wrong... + if (ptr->codec->master_data->readreg) + value = (ptr->codec->master_data->readreg(ptr->codec, + reg)) & 0xff; + else + dprintk(1, + KERN_ERR "%s: invalid I/O setup, nothing read!\n", + ptr->name); + + //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value); + + return value; +} + +static void +zr36060_write(struct zr36060 *ptr, + u16 reg, + u8 value) +{ + //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg); + dprintk(4, "0x%02x @0x%04x\n", value, reg); + + // just in case something is wrong... + if (ptr->codec->master_data->writereg) + ptr->codec->master_data->writereg(ptr->codec, reg, value); + else + dprintk(1, + KERN_ERR + "%s: invalid I/O setup, nothing written!\n", + ptr->name); +} + +/* ========================================================================= + Local helper function: + + status read + ========================================================================= */ + +/* status is kept in datastructure */ +static u8 +zr36060_read_status (struct zr36060 *ptr) +{ + ptr->status = zr36060_read(ptr, ZR060_CFSR); + + zr36060_read(ptr, 0); + return ptr->status; +} + +/* ========================================================================= + Local helper function: + + scale factor read + ========================================================================= */ + +/* scale factor is kept in datastructure */ +static u16 +zr36060_read_scalefactor (struct zr36060 *ptr) +{ + ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) | + (zr36060_read(ptr, ZR060_SF_LO) & 0xFF); + + /* leave 0 selected for an eventually GO from master */ + zr36060_read(ptr, 0); + return ptr->scalefact; +} + +/* ========================================================================= + Local helper function: + + wait if codec is ready to proceed (end of processing) or time is over + ========================================================================= */ + +static void +zr36060_wait_end (struct zr36060 *ptr) +{ + int i = 0; + + while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { + udelay(1); + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! + dprintk(1, + "%s: timeout at wait_end (last status: 0x%02x)\n", + ptr->name, ptr->status); + break; + } + } +} + +/* ========================================================================= + Local helper function: + + basic test of "connectivity", writes/reads to/from memory the SOF marker + ========================================================================= */ + +static int +zr36060_basic_test (struct zr36060 *ptr) +{ + if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) && + (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) { + dprintk(1, + KERN_ERR + "%s: attach failed, can't connect to jpeg processor!\n", + ptr->name); + return -ENXIO; + } + + zr36060_wait_end(ptr); + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, + KERN_ERR + "%s: attach failed, jpeg processor failed (end flag)!\n", + ptr->name); + return -EBUSY; + } + + return 0; /* looks good! */ +} + +/* ========================================================================= + Local helper function: + + simple loop for pushing the init datasets + ========================================================================= */ + +static int +zr36060_pushit (struct zr36060 *ptr, + u16 startreg, + u16 len, + const char *data) +{ + int i = 0; + + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, + startreg, len); + while (i < len) { + zr36060_write(ptr, startreg++, data[i++]); + } + + return i; +} + +/* ========================================================================= + Basic datasets: + + jpeg baseline setup data (you find it on lots places in internet, or just + extract it from any regular .jpg image...) + + Could be variable, but until it's not needed it they are just fixed to save + memory. Otherwise expand zr36060 structure with arrays, push the values to + it and initialize from there, as e.g. the linux zr36057/60 driver does it. + ========================================================================= */ + +static const char zr36060_dqt[0x86] = { + 0xff, 0xdb, //Marker: DQT + 0x00, 0x84, //Length: 2*65+2 + 0x00, //Pq,Tq first table + 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, + 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, + 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, + 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, + 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, + 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, + 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, + 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, + 0x01, //Pq,Tq second table + 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, + 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, + 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 +}; + +static const char zr36060_dht[0x1a4] = { + 0xff, 0xc4, //Marker: DHT + 0x01, 0xa2, //Length: 2*AC, 2*DC + 0x00, //DC first table + 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x01, //DC second table + 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, + 0x10, //AC first table + 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, + 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, + 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, + 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, + 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, + 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, + 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, + 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, + 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, + 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, + 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, + 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, + 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, + 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, + 0xF8, 0xF9, 0xFA, + 0x11, //AC second table + 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, + 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, + 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, + 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, + 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, + 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, + 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, + 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, + 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, + 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, + 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, + 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, + 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, + 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, + 0xF9, 0xFA +}; + +/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ +#define NO_OF_COMPONENTS 0x3 //Y,U,V +#define BASELINE_PRECISION 0x8 //MCU size (?) +static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT +static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC +static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC + +/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ +static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; +static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; + +/* ========================================================================= + Local helper functions: + + calculation and setup of parameter-dependent JPEG baseline segments + (needed for compression only) + ========================================================================= */ + +/* ------------------------------------------------------------------------- */ + +/* SOF (start of frame) segment depends on width, height and sampling ratio + of each color component */ + +static int +zr36060_set_sof (struct zr36060 *ptr) +{ + char sof_data[34]; // max. size of register set + int i; + + dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name, + ptr->width, ptr->height, NO_OF_COMPONENTS); + sof_data[0] = 0xff; + sof_data[1] = 0xc0; + sof_data[2] = 0x00; + sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; + sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36060 + sof_data[5] = (ptr->height) >> 8; + sof_data[6] = (ptr->height) & 0xff; + sof_data[7] = (ptr->width) >> 8; + sof_data[8] = (ptr->width) & 0xff; + sof_data[9] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sof_data[10 + (i * 3)] = i; // index identifier + sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | + (ptr->v_samp_ratio[i]); // sampling ratios + sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection + } + return zr36060_pushit(ptr, ZR060_SOF_IDX, + (3 * NO_OF_COMPONENTS) + 10, sof_data); +} + +/* ------------------------------------------------------------------------- */ + +/* SOS (start of scan) segment depends on the used scan components + of each color component */ + +static int +zr36060_set_sos (struct zr36060 *ptr) +{ + char sos_data[16]; // max. size of register set + int i; + + dprintk(3, "%s: write SOS\n", ptr->name); + sos_data[0] = 0xff; + sos_data[1] = 0xda; + sos_data[2] = 0x00; + sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; + sos_data[4] = NO_OF_COMPONENTS; + for (i = 0; i < NO_OF_COMPONENTS; i++) { + sos_data[5 + (i * 2)] = i; // index + sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | + zr36060_ta[i]; // AC/DC tbl.sel. + } + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; + sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; + return zr36060_pushit(ptr, ZR060_SOS_IDX, + 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, + sos_data); +} + +/* ------------------------------------------------------------------------- */ + +/* DRI (define restart interval) */ + +static int +zr36060_set_dri (struct zr36060 *ptr) +{ + char dri_data[6]; // max. size of register set + + dprintk(3, "%s: write DRI\n", ptr->name); + dri_data[0] = 0xff; + dri_data[1] = 0xdd; + dri_data[2] = 0x00; + dri_data[3] = 0x04; + dri_data[4] = (ptr->dri) >> 8; + dri_data[5] = (ptr->dri) & 0xff; + return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data); +} + +/* ========================================================================= + Setup function: + + Setup compression/decompression of Zoran's JPEG processor + ( see also zoran 36060 manual ) + + ... sorry for the spaghetti code ... + ========================================================================= */ +static void +zr36060_init (struct zr36060 *ptr) +{ + int sum = 0; + long bitcnt, tmp; + + if (ptr->mode == CODEC_DO_COMPRESSION) { + dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Compression with or without variable scale factor */ + /*FIXME: What about ptr->bitrate_ctrl? */ + zr36060_write(ptr, ZR060_CMR, + ZR060_CMR_Comp | ZR060_CMR_Pass2 | + ZR060_CMR_BRB); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* volume control settings */ + zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8); + zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff); + + zr36060_write(ptr, ZR060_AF_HI, 0xff); + zr36060_write(ptr, ZR060_AF_M, 0xff); + zr36060_write(ptr, ZR060_AF_LO, 0xff); + + /* setup the variable jpeg tables */ + sum += zr36060_set_sof(ptr); + sum += zr36060_set_sos(ptr); + sum += zr36060_set_dri(ptr); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + sum += + zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt), + zr36060_dqt); + sum += + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + zr36060_write(ptr, ZR060_APP_IDX, 0xff); + zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn); + zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2); + sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60, + ptr->app.data) + 4; + zr36060_write(ptr, ZR060_COM_IDX, 0xff); + zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe); + zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00); + zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2); + sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60, + ptr->com.data) + 4; + + /* setup misc. data for compression (target code sizes) */ + + /* size of compressed code to reach without header data */ + sum = ptr->real_code_vol - sum; + bitcnt = sum << 3; /* need the size in bits */ + + tmp = bitcnt >> 16; + dprintk(3, + "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", + ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff); + + bitcnt -= bitcnt >> 7; // bits without stuffing + bitcnt -= ((bitcnt * 5) >> 6); // bits without eob + + tmp = bitcnt >> 16; + dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n", + ptr->name, bitcnt, tmp); + zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff); + tmp = bitcnt & 0xffff; + zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8); + zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff); + + /* JPEG markers to be included in the compressed stream */ + zr36060_write(ptr, ZR060_MER, + ZR060_MER_DQT | ZR060_MER_DHT | + ((ptr->com.len > 0) ? ZR060_MER_Com : 0) | + ((ptr->app.len > 0) ? ZR060_MER_App : 0)); + + /* Setup the Video Frontend */ + /* Limit pixel range to 16..235 as per CCIR-601 */ + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + + } else { + dprintk(2, "%s: EXPANSION SETUP\n", ptr->name); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* 060 communicates with 067 in master mode */ + zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr); + + /* Decompression */ + zr36060_write(ptr, ZR060_CMR, 0); + + /* Must be zero */ + zr36060_write(ptr, ZR060_MBZ, 0x00); + zr36060_write(ptr, ZR060_TCR_HI, 0x00); + zr36060_write(ptr, ZR060_TCR_LO, 0x00); + + /* Disable all IRQs - no DataErr means autoreset */ + zr36060_write(ptr, ZR060_IMR, 0); + + /* setup misc. data for expansion */ + zr36060_write(ptr, ZR060_MER, 0); + + /* setup the fixed jpeg tables - maybe variable, though - + * (see table init section above) */ + zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht), + zr36060_dht); + + /* Setup the Video Frontend */ + //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt); + //this doesn't seem right and doesn't work... + zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range); + } + + /* Load the tables */ + zr36060_write(ptr, ZR060_LOAD, + ZR060_LOAD_SyncRst | ZR060_LOAD_Load); + zr36060_wait_end(ptr); + dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name, + ptr->status); + + if (ptr->status & ZR060_CFSR_Busy) { + dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name); + return; // something is wrong, its timed out!!!! + } +} + +/* ========================================================================= + CODEC API FUNCTIONS + + this functions are accessed by the master via the API structure + ========================================================================= */ + +/* set compression/expansion mode and launches codec - + this should be the last call from the master before starting processing */ +static int +zr36060_set_mode (struct videocodec *codec, + int mode) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + + dprintk(2, "%s: set_mode %d call\n", ptr->name, mode); + + if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) + return -EINVAL; + + ptr->mode = mode; + zr36060_init(ptr); + + return 0; +} + +/* set picture size (norm is ignored as the codec doesn't know about it) */ +static int +zr36060_set_video (struct videocodec *codec, + struct tvnorm *norm, + struct vfe_settings *cap, + struct vfe_polarity *pol) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + u32 reg; + int size; + + dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name, + cap->x, cap->y, cap->width, cap->height, cap->decimation); + + /* if () return -EINVAL; + * trust the master driver that it knows what it does - so + * we allow invalid startx/y and norm for now ... */ + ptr->width = cap->width / (cap->decimation & 0xff); + ptr->height = cap->height / (cap->decimation >> 8); + + zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst); + + /* Note that VSPol/HSPol bits in zr36060 have the opposite + * meaning of their zr360x7 counterparts with the same names + * N.b. for VSPol this is only true if FIVEdge = 0 (default, + * left unchanged here - in accordance with datasheet). + */ + reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0) + | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0) + | (pol->field_pol ? ZR060_VPR_FIPol : 0) + | (pol->blank_pol ? ZR060_VPR_BLPol : 0) + | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0) + | (pol->poe_pol ? ZR060_VPR_PoePol : 0) + | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0) + | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0); + zr36060_write(ptr, ZR060_VPR, reg); + + reg = 0; + switch (cap->decimation & 0xff) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_HScale2; + break; + + case 4: + reg |= ZR060_SR_HScale4; + break; + } + + switch (cap->decimation >> 8) { + default: + case 1: + break; + + case 2: + reg |= ZR060_SR_VScale; + break; + } + zr36060_write(ptr, ZR060_SR, reg); + + zr36060_write(ptr, ZR060_BCR_Y, 0x00); + zr36060_write(ptr, ZR060_BCR_U, 0x80); + zr36060_write(ptr, ZR060_BCR_V, 0x80); + + /* sync generator */ + + reg = norm->Ht - 1; /* Vtotal */ + zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff); + + reg = norm->Wt - 1; /* Htotal */ + zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff); + + reg = 6 - 1; /* VsyncSize */ + zr36060_write(ptr, ZR060_SGR_VSYNC, reg); + + //reg = 30 - 1; /* HsyncSize */ +///*CP*/ reg = (zr->params.norm == 1 ? 57 : 68); + reg = 68; + zr36060_write(ptr, ZR060_SGR_HSYNC, reg); + + reg = norm->VStart - 1; /* BVstart */ + zr36060_write(ptr, ZR060_SGR_BVSTART, reg); + + reg += norm->Ha / 2; /* BVend */ + zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart - 1; /* BHstart */ + zr36060_write(ptr, ZR060_SGR_BHSTART, reg); + + reg += norm->Wa; /* BHend */ + zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff); + + /* active area */ + reg = cap->y + norm->VStart; /* Vstart */ + zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff); + + reg += cap->height; /* Vend */ + zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff); + + reg = cap->x + norm->HStart; /* Hstart */ + zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff); + + reg += cap->width; /* Hend */ + zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff); + + /* subimage area */ + reg = norm->VStart - 4; /* SVstart */ + zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Ha / 2 + 8; /* SVend */ + zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff); + + reg = norm->HStart /*+ 64 */ - 4; /* SHstart */ + zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff); + + reg += norm->Wa + 8; /* SHend */ + zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff); + zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff); + + size = ptr->width * ptr->height; + /* Target compressed field size in bits: */ + size = size * 16; /* uncompressed size in bits */ + /* (Ronald) by default, quality = 100 is a compression + * ratio 1:2. Setting low_bitrate (insmod option) sets + * it to 1:4 (instead of 1:2, zr36060 max) as limit because the + * buz can't handle more at decimation=1... Use low_bitrate if + * you have a Buz, unless you know what you're doing */ + size = size * cap->quality / (low_bitrate ? 400 : 200); + /* Lower limit (arbitrary, 1 KB) */ + if (size < 8192) + size = 8192; + /* Upper limit: 7/8 of the code buffers */ + if (size > ptr->total_code_vol * 7) + size = ptr->total_code_vol * 7; + + ptr->real_code_vol = size >> 3; /* in bytes */ + + /* the MBCVR is the *maximum* block volume, according to the + * JPEG ISO specs, this shouldn't be used, since that allows + * for the best encoding quality. So set it to it's max value */ + reg = ptr->max_block_vol; + zr36060_write(ptr, ZR060_MBCVR, reg); + + return 0; +} + +/* additional control functions */ +static int +zr36060_control (struct videocodec *codec, + int type, + int size, + void *data) +{ + struct zr36060 *ptr = (struct zr36060 *) codec->data; + int *ival = (int *) data; + + dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type, + size); + + switch (type) { + case CODEC_G_STATUS: /* get last status */ + if (size != sizeof(int)) + return -EFAULT; + zr36060_read_status(ptr); + *ival = ptr->status; + break; + + case CODEC_G_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + *ival = CODEC_MODE_BJPG; + break; + + case CODEC_S_CODEC_MODE: + if (size != sizeof(int)) + return -EFAULT; + if (*ival != CODEC_MODE_BJPG) + return -EINVAL; + /* not needed, do nothing */ + return 0; + + case CODEC_G_VFE: + case CODEC_S_VFE: + /* not needed, do nothing */ + return 0; + + case CODEC_S_MMAP: + /* not available, give an error */ + return -ENXIO; + + case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + *ival = ptr->total_code_vol; + break; + + case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ + if (size != sizeof(int)) + return -EFAULT; + ptr->total_code_vol = *ival; + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + break; + + case CODEC_G_JPEG_SCALE: /* get scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + *ival = zr36060_read_scalefactor(ptr); + break; + + case CODEC_S_JPEG_SCALE: /* set scaling factor */ + if (size != sizeof(int)) + return -EFAULT; + ptr->scalefact = *ival; + break; + + case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + *app = ptr->app; + break; + } + + case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ + struct jpeg_app_marker *app = data; + + if (size != sizeof(struct jpeg_app_marker)) + return -EFAULT; + + ptr->app = *app; + break; + } + + case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + *com = ptr->com; + break; + } + + case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ + struct jpeg_com_marker *com = data; + + if (size != sizeof(struct jpeg_com_marker)) + return -EFAULT; + + ptr->com = *com; + break; + } + + default: + return -EINVAL; + } + + return size; +} + +/* ========================================================================= + Exit and unregister function: + + Deinitializes Zoran's JPEG processor + ========================================================================= */ + +static int +zr36060_unset (struct videocodec *codec) +{ + struct zr36060 *ptr = codec->data; + + if (ptr) { + /* do wee need some codec deinit here, too ???? */ + + dprintk(1, "%s: finished codec #%d\n", ptr->name, + ptr->num); + kfree(ptr); + codec->data = NULL; + + zr36060_codecs--; + return 0; + } + + return -EFAULT; +} + +/* ========================================================================= + Setup and registry function: + + Initializes Zoran's JPEG processor + + Also sets pixel size, average code size, mode (compr./decompr.) + (the given size is determined by the processor with the video interface) + ========================================================================= */ + +static int +zr36060_setup (struct videocodec *codec) +{ + struct zr36060 *ptr; + int res; + + dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n", + zr36060_codecs); + + if (zr36060_codecs == MAX_CODECS) { + dprintk(1, + KERN_ERR "zr36060: Can't attach more codecs!\n"); + return -ENOSPC; + } + //mem structure init + codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL); + if (NULL == ptr) { + dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n"); + return -ENOMEM; + } + + snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]", + zr36060_codecs); + ptr->num = zr36060_codecs++; + ptr->codec = codec; + + //testing + res = zr36060_basic_test(ptr); + if (res < 0) { + zr36060_unset(codec); + return res; + } + //final setup + memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8); + memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8); + + ptr->bitrate_ctrl = 0; /* 0 or 1 - fixed file size flag + * (what is the difference?) */ + ptr->mode = CODEC_DO_COMPRESSION; + ptr->width = 384; + ptr->height = 288; + ptr->total_code_vol = 16000; /* CHECKME */ + ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; + ptr->max_block_vol = 240; /* CHECKME, was 120 is 240 */ + ptr->scalefact = 0x100; + ptr->dri = 1; /* CHECKME, was 8 is 1 */ + + /* by default, no COM or APP markers - app should set those */ + ptr->com.len = 0; + ptr->app.appn = 0; + ptr->app.len = 0; + + zr36060_init(ptr); + + dprintk(1, KERN_INFO "%s: codec attached and running\n", + ptr->name); + + return 0; +} + +static const struct videocodec zr36060_codec = { + .owner = THIS_MODULE, + .name = "zr36060", + .magic = 0L, // magic not used + .flags = + CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | + CODEC_FLAG_DECODER | CODEC_FLAG_VFE, + .type = CODEC_TYPE_ZR36060, + .setup = zr36060_setup, // functionality + .unset = zr36060_unset, + .set_mode = zr36060_set_mode, + .set_video = zr36060_set_video, + .control = zr36060_control, + // others are not used +}; + +/* ========================================================================= + HOOK IN DRIVER AS KERNEL MODULE + ========================================================================= */ + +static int __init +zr36060_init_module (void) +{ + //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION); + zr36060_codecs = 0; + return videocodec_register(&zr36060_codec); +} + +static void __exit +zr36060_cleanup_module (void) +{ + if (zr36060_codecs) { + dprintk(1, + "zr36060: something's wrong - %d codecs left somehow.\n", + zr36060_codecs); + } + + /* however, we can't just stay alive */ + videocodec_unregister(&zr36060_codec); +} + +module_init(zr36060_init_module); +module_exit(zr36060_cleanup_module); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@skynet.be>"); +MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors " + ZR060_VERSION); +MODULE_LICENSE("GPL"); |