diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget.c')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 21 |
1 files changed, 14 insertions, 7 deletions
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 4fd8bbc47037..238c77b52f89 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -112,6 +112,7 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long * Routines for the Fujitsu Siemens Activy budget card * 22 kHz tone and DiSEqC are handled by the frontend. * Voltage must be set here. + * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL */ static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage) { @@ -121,11 +122,16 @@ static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage) switch (voltage) { case SEC_VOLTAGE_13: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); break; case SEC_VOLTAGE_18: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); break; + case SEC_VOLTAGE_OFF: + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); + break; default: return -EINVAL; } @@ -206,7 +212,7 @@ static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) return 0; } -static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg) +static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, long arg) { struct budget* budget = (struct budget*) fe->dvb->priv; u8 buf; @@ -256,7 +262,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param buf[2] = ((div & 0x18000) >> 10) | 0x95; buf[3] = (pwr << 6) | 0x30; - // NOTE: since we're using a prescaler of 2, we set the + // NOTE: since we're using a prescaler of 2, we set the // divisor frequency to 62.5kHz and divide by 125 above if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; @@ -565,7 +571,7 @@ static u8 read_pwm(struct budget* budget) struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) pwm = 0x48; return pwm; @@ -580,6 +586,7 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL; if (lnbp21_init(budget)) { printk("%s: No LNBP21 found!\n", __FUNCTION__); goto error_out; @@ -593,7 +600,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; budget->dvb_frontend->ops->set_tone = budget_set_tone; break; } @@ -624,7 +631,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage; - break; + budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL; } break; @@ -632,7 +639,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage; - break; + budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL; } break; @@ -738,7 +745,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl); static struct saa7146_extension budget_extension = { .name = "budget dvb\0", - .flags = 0, + .flags = SAA7146_I2C_SHORT_DELAY, .module = THIS_MODULE, .pci_tbl = pci_tbl, |