diff options
Diffstat (limited to 'drivers/media/dvb/b2c2')
| -rw-r--r-- | drivers/media/dvb/b2c2/Makefile | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-common.h | 64 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-dma.c | 27 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-eeprom.c | 47 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 6 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-hw-filter.c | 171 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-i2c.c | 49 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-misc.c | 68 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-reg.h | 21 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-sram.c | 112 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-usb.h | 62 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.c | 85 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop.h | 20 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop_ibi_value_be.h | 7 | ||||
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop_ibi_value_le.h | 7 |
15 files changed, 353 insertions, 394 deletions
diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index d9db066f9854..b97cf7208a18 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -2,7 +2,6 @@ b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o - ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),) b2c2-flexcop-objs += flexcop-dma.o endif diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 8ce06336e76f..3e1c472092ab 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -28,11 +28,14 @@ /* Steal from usb.h */ #undef err -#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) +#define err(format, arg...) \ + printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) #undef info -#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) +#define info(format, arg...) \ + printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) #undef warn -#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) +#define warn(format, arg...) \ + printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) struct flexcop_dma { struct pci_dev *pdev; @@ -91,16 +94,14 @@ struct flexcop_device { int fullts_streaming_state; /* bus specific callbacks */ - flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register); - int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value); - - - int (*i2c_request) (struct flexcop_i2c_adapter*, + flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *, + flexcop_ibi_register); + int (*write_ibi_reg) (struct flexcop_device *, + flexcop_ibi_register, flexcop_ibi_value); + int (*i2c_request) (struct flexcop_i2c_adapter *, flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); - int (*stream_control) (struct flexcop_device*, int); - + int (*stream_control) (struct flexcop_device *, int); int (*get_mac_addr) (struct flexcop_device *fc, int extended); - void *bus_specific; }; @@ -111,22 +112,28 @@ void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len); void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no); struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len); -void flexcop_device_kfree(struct flexcop_device*); +void flexcop_device_kfree(struct flexcop_device *); -int flexcop_device_initialize(struct flexcop_device*); +int flexcop_device_initialize(struct flexcop_device *); void flexcop_device_exit(struct flexcop_device *fc); - void flexcop_reset_block_300(struct flexcop_device *fc); /* from flexcop-dma.c */ -int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size); +int flexcop_dma_allocate(struct pci_dev *pdev, + struct flexcop_dma *dma, u32 size); void flexcop_dma_free(struct flexcop_dma *dma); -int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); -int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); -int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx); -int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff); -int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles); +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_size_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, int onoff); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, + flexcop_dma_index_t dma_idx); +int flexcop_dma_xfer_control(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, + int onoff); +int flexcop_dma_config_timer(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, u8 cycles); /* from flexcop-eeprom.c */ /* the PCI part uses this call to get the MAC address, the USB part has its own */ @@ -141,13 +148,15 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); /* from flexcop-sram.c */ -int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, + flexcop_sram_dest_target_t target); void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s); -void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill); +void flexcop_sram_ctrl(struct flexcop_device *fc, + int usb_wan, int sramdma, int maximumfill); /* global prototypes for the flexcop-chip */ /* from flexcop-fe-tuner.c */ -int flexcop_frontend_init(struct flexcop_device *card); +int flexcop_frontend_init(struct flexcop_device *fc); void flexcop_frontend_exit(struct flexcop_device *fc); /* from flexcop-i2c.c */ @@ -159,11 +168,14 @@ int flexcop_sram_init(struct flexcop_device *fc); /* from flexcop-misc.c */ void flexcop_determine_revision(struct flexcop_device *fc); -void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix); -void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num); +void flexcop_device_name(struct flexcop_device *fc, + const char *prefix, const char *suffix); +void flexcop_dump_reg(struct flexcop_device *fc, + flexcop_ibi_register reg, int num); /* from flexcop-hw-filter.c */ -int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff); +int flexcop_pid_feed_control(struct flexcop_device *fc, + struct dvb_demux_feed *dvbdmxfeed, int onoff); void flexcop_hw_filter_init(struct flexcop_device *fc); void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff); diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index 26f0011a5078..2881e0d956ad 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -1,13 +1,12 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-dma.c - configuring and controlling the DMA of the FlexCop + * see flexcop.c for copyright information */ #include "flexcop.h" -int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size) +int flexcop_dma_allocate(struct pci_dev *pdev, + struct flexcop_dma *dma, u32 size) { u8 *tcpu; dma_addr_t tdma = 0; @@ -32,7 +31,8 @@ EXPORT_SYMBOL(flexcop_dma_allocate); void flexcop_dma_free(struct flexcop_dma *dma) { - pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0); + pci_free_consistent(dma->pdev, dma->size*2, + dma->cpu_addr0, dma->dma_addr0); memset(dma,0,sizeof(struct flexcop_dma)); } EXPORT_SYMBOL(flexcop_dma_free); @@ -44,8 +44,8 @@ int flexcop_dma_config(struct flexcop_device *fc, flexcop_ibi_value v0x0,v0x4,v0xc; v0x0.raw = v0x4.raw = v0xc.raw = 0; - v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; - v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; if ((dma_idx & FC_DMA_1) == dma_idx) { @@ -57,7 +57,8 @@ int flexcop_dma_config(struct flexcop_device *fc, fc->write_ibi_reg(fc,dma2_014,v0x4); fc->write_ibi_reg(fc,dma2_01c,v0xc); } else { - err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call."); + err("either DMA1 or DMA2 can be configured within one " + "flexcop_dma_config call."); return -EINVAL; } @@ -81,7 +82,8 @@ int flexcop_dma_xfer_control(struct flexcop_device *fc, r0x0 = dma2_010; r0xc = dma2_01c; } else { - err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call."); + err("either transfer DMA1 or DMA2 can be started within one " + "flexcop_dma_xfer_control call."); return -EINVAL; } @@ -154,8 +156,7 @@ EXPORT_SYMBOL(flexcop_dma_control_timer_irq); /* 1 cycles = 1.97 msec */ int flexcop_dma_config_timer(struct flexcop_device *fc, - flexcop_dma_index_t dma_idx, - u8 cycles) + flexcop_dma_index_t dma_idx, u8 cycles) { flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; flexcop_ibi_value v = fc->read_ibi_reg(fc,r); diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c index 8a8ae8a3e6ba..a25373a9bd84 100644 --- a/drivers/media/dvb/b2c2/flexcop-eeprom.c +++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c @@ -1,9 +1,7 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used) - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading) + * see flexcop.c for copyright information */ #include "flexcop.h" @@ -14,17 +12,17 @@ static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); } -static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries) +static int eeprom_lrc_write(struct adapter *adapter, u32 addr, + u32 len, u8 *wbuf, u8 *rbuf, int retries) { - int i; +int i; - for (i = 0; i < retries; i++) { - if (eeprom_write(adapter, addr, wbuf, len) == len) { - if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) - return 1; +for (i = 0; i < retries; i++) { + if (eeprom_write(adapter, addr, wbuf, len) == len) { + if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) + return 1; } } - return 0; } @@ -39,12 +37,10 @@ static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) return 0; memcpy(wbuf, key, len); - wbuf[16] = 0; wbuf[17] = 0; wbuf[18] = 0; wbuf[19] = calc_lrc(wbuf, 19); - return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); } @@ -59,7 +55,6 @@ static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) return 0; memcpy(key, buf, len); - return 1; } @@ -74,9 +69,7 @@ static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) tmp[3] = mac[5]; tmp[4] = mac[6]; tmp[5] = mac[7]; - } else { - tmp[0] = mac[0]; tmp[1] = mac[1]; tmp[2] = mac[2]; @@ -90,11 +83,11 @@ static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) return 1; - return 0; } -static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len) +static int flexcop_eeprom_read(struct flexcop_device *fc, + u16 addr, u8 *buf, u16 len) { return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len); } @@ -110,7 +103,8 @@ static u8 calc_lrc(u8 *buf, int len) return sum; } -static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries) +static int flexcop_eeprom_request(struct flexcop_device *fc, + flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries) { int i,ret = 0; u8 chipaddr = 0x50 | ((addr >> 8) & 3); @@ -123,7 +117,8 @@ static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t return ret; } -static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries) +static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, + u8 *buf, u16 len, int retries) { int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries); if (ret == 0) @@ -133,8 +128,7 @@ static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, } /* JJ's comment about extended == 1: it is not presently used anywhere but was - * added to the low-level functions for possible support of EUI64 - */ + * added to the low-level functions for possible support of EUI64 */ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) { u8 buf[8]; @@ -142,12 +136,9 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) { if (extended != 0) { - err("TODO: extended (EUI64) MAC addresses aren't completely supported yet"); + err("TODO: extended (EUI64) MAC addresses aren't " + "completely supported yet"); ret = -EINVAL; -/* memcpy(fc->dvb_adapter.proposed_mac,buf,3); - mac[3] = 0xfe; - mac[4] = 0xff; - memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */ } else memcpy(fc->dvb_adapter.proposed_mac,buf,6); } diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 5cded3708541..f7afab5944cf 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -592,14 +592,14 @@ int flexcop_frontend_init(struct flexcop_device *fc) fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; - fc->dev_type = FC_SKY; + fc->dev_type = FC_SKY_REV26; goto fe_found; } /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); if (fc->fe != NULL) { - fc->dev_type = FC_AIR_DVB; + fc->dev_type = FC_AIR_DVBT; fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; goto fe_found; } @@ -653,7 +653,7 @@ int flexcop_frontend_init(struct flexcop_device *fc) fc->fe_sleep = ops->sleep; ops->sleep = flexcop_sleep; - fc->dev_type = FC_SKY_OLD; + fc->dev_type = FC_SKY_REV23; goto fe_found; } diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index 451974ba32f3..77e45475f4c7 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -1,33 +1,30 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-hw-filter.c - pid and mac address filtering and control functions + * see flexcop.c for copyright information */ #include "flexcop.h" static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) { - flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff); - - deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off"); + flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff); + deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off"); } void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) { - flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff); + flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff); } static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff) { - flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff); + flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff); } void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]) { - flexcop_ibi_value v418,v41c; - v41c = fc->read_ibi_reg(fc,mac_address_41c); + flexcop_ibi_value v418, v41c; + v41c = fc->read_ibi_reg(fc, mac_address_41c); v418.mac_address_418.MAC1 = mac[0]; v418.mac_address_418.MAC2 = mac[1]; @@ -36,27 +33,28 @@ void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]) v41c.mac_address_41c.MAC7 = mac[4]; v41c.mac_address_41c.MAC8 = mac[5]; - fc->write_ibi_reg(fc,mac_address_418,v418); - fc->write_ibi_reg(fc,mac_address_41c,v41c); + fc->write_ibi_reg(fc, mac_address_418, v418); + fc->write_ibi_reg(fc, mac_address_41c, v41c); } void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff) { - flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff); + flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff); } -static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask) +static void flexcop_pid_group_filter(struct flexcop_device *fc, + u16 pid, u16 mask) { /* index_reg_310.extra_index_reg need to 0 or 7 to work */ flexcop_ibi_value v30c; v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid; v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask; - fc->write_ibi_reg(fc,pid_filter_30c,v30c); + fc->write_ibi_reg(fc, pid_filter_30c, v30c); } static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff) { - flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff); + flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff); } /* this fancy define reduces the code size of the quite similar PID controlling of @@ -65,91 +63,112 @@ static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff) #define pid_ctrl(vregname,field,enablefield,trans_field,transval) \ flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \ - v208 = fc->read_ibi_reg(fc, ctrl_208); \ -\ - vpid.vregname.field = onoff ? pid : 0x1fff; \ - vpid.vregname.trans_field = transval; \ - v208.ctrl_208.enablefield = onoff; \ -\ - fc->write_ibi_reg(fc,vregname,vpid); \ - fc->write_ibi_reg(fc,ctrl_208,v208); +v208 = fc->read_ibi_reg(fc, ctrl_208); \ +vpid.vregname.field = onoff ? pid : 0x1fff; \ +vpid.vregname.trans_field = transval; \ +v208.ctrl_208.enablefield = onoff; \ +fc->write_ibi_reg(fc, vregname, vpid); \ +fc->write_ibi_reg(fc, ctrl_208, v208); -static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0); + pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig, + Stream1_trans, 0); } -static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0); + pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig, + Stream2_trans, 0); } -static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0); + pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0); } -static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0); + pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0); } -static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0); + pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0); } -static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, + u16 pid, int onoff) { - pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0); + pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0); } -static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff) +static void flexcop_pid_control(struct flexcop_device *fc, + int index, u16 pid, int onoff) { if (pid == 0x2000) return; - deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off"); + deb_ts("setting pid: %5d %04x at index %d '%s'\n", + pid, pid, index, onoff ? "on" : "off"); /* We could use bit magic here to reduce source code size. * I decided against it, but to use the real register names */ switch (index) { - case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break; - case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break; - case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break; - case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break; - case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break; - case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break; - default: - if (fc->has_32_hw_pid_filter && index < 38) { - flexcop_ibi_value vpid,vid; - - /* set the index */ - vid = fc->read_ibi_reg(fc,index_reg_310); - vid.index_reg_310.index_reg = index - 6; - fc->write_ibi_reg(fc,index_reg_310, vid); - - vpid = fc->read_ibi_reg(fc,pid_n_reg_314); - vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff; - vpid.pid_n_reg_314.PID_enable_bit = onoff; - fc->write_ibi_reg(fc,pid_n_reg_314, vpid); - } - break; + case 0: + flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff); + break; + case 1: + flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff); + break; + case 2: + flexcop_pid_PCR_PID_ctrl(fc, pid, onoff); + break; + case 3: + flexcop_pid_PMT_PID_ctrl(fc, pid, onoff); + break; + case 4: + flexcop_pid_EMM_PID_ctrl(fc, pid, onoff); + break; + case 5: + flexcop_pid_ECM_PID_ctrl(fc, pid, onoff); + break; + default: + if (fc->has_32_hw_pid_filter && index < 38) { + flexcop_ibi_value vpid, vid; + + /* set the index */ + vid = fc->read_ibi_reg(fc, index_reg_310); + vid.index_reg_310.index_reg = index - 6; + fc->write_ibi_reg(fc, index_reg_310, vid); + + vpid = fc->read_ibi_reg(fc, pid_n_reg_314); + vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff; + vpid.pid_n_reg_314.PID_enable_bit = onoff; + fc->write_ibi_reg(fc, pid_n_reg_314, vpid); + } + break; } } -static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff) +static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff) { if (fc->fullts_streaming_state != onoff) { deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling"); flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff)); - flexcop_pid_group_filter_ctrl(fc,onoff); + flexcop_pid_group_filter_ctrl(fc, onoff); fc->fullts_streaming_state = onoff; } return 0; } -int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff) +int flexcop_pid_feed_control(struct flexcop_device *fc, + struct dvb_demux_feed *dvbdmxfeed, int onoff) { int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; @@ -164,24 +183,25 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d * - or the requested pid is 0x2000 */ if (!fc->pid_filtering && fc->feedcount == onoff) - flexcop_toggle_fullts_streaming(fc,onoff); + flexcop_toggle_fullts_streaming(fc, onoff); if (fc->pid_filtering) { - flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); + flexcop_pid_control \ + (fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff); if (fc->extra_feedcount > 0) - flexcop_toggle_fullts_streaming(fc,1); + flexcop_toggle_fullts_streaming(fc, 1); else if (dvbdmxfeed->pid == 0x2000) - flexcop_toggle_fullts_streaming(fc,onoff); + flexcop_toggle_fullts_streaming(fc, onoff); else - flexcop_toggle_fullts_streaming(fc,0); + flexcop_toggle_fullts_streaming(fc, 0); } /* if it was the first or last feed request change the stream-status */ if (fc->feedcount == onoff) { - flexcop_rcv_data_ctrl(fc,onoff); + flexcop_rcv_data_ctrl(fc, onoff); if (fc->stream_control) /* device specific stream control */ - fc->stream_control(fc,onoff); + fc->stream_control(fc, onoff); /* feeding stopped -> reset the flexcop filter*/ if (onoff == 0) { @@ -189,7 +209,6 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d flexcop_hw_filter_init(fc); } } - return 0; } EXPORT_SYMBOL(flexcop_pid_feed_control); @@ -199,15 +218,15 @@ void flexcop_hw_filter_init(struct flexcop_device *fc) int i; flexcop_ibi_value v; for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++) - flexcop_pid_control(fc,i,0x1fff,0); + flexcop_pid_control(fc, i, 0x1fff, 0); flexcop_pid_group_filter(fc, 0, 0x1fe0); - flexcop_pid_group_filter_ctrl(fc,0); + flexcop_pid_group_filter_ctrl(fc, 0); - v = fc->read_ibi_reg(fc,pid_filter_308); + v = fc->read_ibi_reg(fc, pid_filter_308); v.pid_filter_308.EMM_filter_4 = 1; v.pid_filter_308.EMM_filter_6 = 0; - fc->write_ibi_reg(fc,pid_filter_308,v); + fc->write_ibi_reg(fc, pid_filter_308, v); flexcop_null_filter_ctrl(fc, 1); } diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index a0cfde18e640..e2bed5076485 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -1,17 +1,14 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization - * - * see flexcop.c for copyright information. + * see flexcop.c for copyright information */ #include "flexcop.h" #define FC_MAX_I2C_RETRIES 100000 -/* #define DUMP_I2C_MESSAGES */ - -static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) +static int flexcop_i2c_operation(struct flexcop_device *fc, + flexcop_ibi_value *r100) { int i; flexcop_ibi_value r; @@ -26,7 +23,7 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r r = fc->read_ibi_reg(fc, tw_sm_c_100); if (!r.tw_sm_c_100.no_base_addr_ack_error) { - if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */ + if (r.tw_sm_c_100.st_done) { *r100 = r; deb_i2c("i2c success\n"); return 0; @@ -36,15 +33,17 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r return -EREMOTEIO; } } - deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i); + deb_i2c("tried %d times i2c operation, " + "never finished or too many ack errors.\n", i); return -EREMOTEIO; } static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, - flexcop_ibi_value r100, u8 *buf) + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; - int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ + int len = r100.tw_sm_c_100.total_bytes, + /* remember total_bytes is buflen-1 */ ret; /* work-around to have CableStar2 and SkyStar2 rev 2.7 work @@ -81,11 +80,11 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; } - return 0; } -static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +static int flexcop_i2c_write4(struct flexcop_device *fc, + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ @@ -93,7 +92,6 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, /* there is at least one byte, otherwise we wouldn't be here */ r100.tw_sm_c_100.data1_reg = buf[0]; - r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; @@ -106,7 +104,7 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, } int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, - flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { int ret; @@ -129,7 +127,6 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, printk("rd("); else printk("wr("); - printk("%02x): %02x ", chipaddr, addr); #endif @@ -175,7 +172,8 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, EXPORT_SYMBOL(flexcop_i2c_request); /* master xfer callback for demodulator */ -static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) { struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); int i, ret = 0; @@ -194,12 +192,13 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs /* reading */ if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, - msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len); + msgs[i].buf[0], msgs[i+1].buf, + msgs[i+1].len); i++; /* skip the following message */ } else /* writing */ ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, - msgs[i].buf[0], &msgs[i].buf[1], - msgs[i].len - 1); + msgs[i].buf[0], &msgs[i].buf[1], + msgs[i].len - 1); if (ret < 0) { err("i2c master_xfer failed"); break; @@ -226,23 +225,21 @@ static struct i2c_algorithm flexcop_algo = { int flexcop_i2c_init(struct flexcop_device *fc) { int ret; - mutex_init(&fc->i2c_mutex); fc->fc_i2c_adap[0].fc = fc; fc->fc_i2c_adap[1].fc = fc; fc->fc_i2c_adap[2].fc = fc; - fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod", - sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom", - sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner", - sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); @@ -280,7 +277,6 @@ adap_2_failed: i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); adap_1_failed: i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); - return ret; } @@ -291,6 +287,5 @@ void flexcop_i2c_exit(struct flexcop_device *fc) i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); } - fc->init_state &= ~FC_STATE_I2C_INIT; } diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 93d20e56f909..e56627d2f0f4 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -1,9 +1,7 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-misc.c - miscellaneous functions. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-misc.c - miscellaneous functions + * see flexcop.c for copyright information */ #include "flexcop.h" @@ -12,39 +10,43 @@ void flexcop_determine_revision(struct flexcop_device *fc) flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); switch (v.misc_204.Rev_N_sig_revision_hi) { - case 0x2: - deb_info("found a FlexCopII.\n"); - fc->rev = FLEXCOP_II; - break; - case 0x3: - deb_info("found a FlexCopIIb.\n"); - fc->rev = FLEXCOP_IIB; - break; - case 0x0: - deb_info("found a FlexCopIII.\n"); - fc->rev = FLEXCOP_III; - break; - default: - err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi); - break; + case 0x2: + deb_info("found a FlexCopII.\n"); + fc->rev = FLEXCOP_II; + break; + case 0x3: + deb_info("found a FlexCopIIb.\n"); + fc->rev = FLEXCOP_IIB; + break; + case 0x0: + deb_info("found a FlexCopIII.\n"); + fc->rev = FLEXCOP_III; + break; + default: + err("unknown FlexCop Revision: %x. Please report this to " + "linux-dvb@linuxtv.org.", + v.misc_204.Rev_N_sig_revision_hi); + break; } if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) - deb_info("this FlexCop has the additional 32 hardware pid filter.\n"); + deb_info("this FlexCop has " + "the additional 32 hardware pid filter.\n"); else - deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n"); + deb_info("this FlexCop has " + "the 6 basic main hardware pid filter.\n"); /* bus parts have to decide if hw pid filtering is used or not. */ } static const char *flexcop_revision_names[] = { - "Unkown chip", + "Unknown chip", "FlexCopII", "FlexCopIIb", "FlexCopIII", }; static const char *flexcop_device_names[] = { - "Unkown device", + "Unknown device", "Air2PC/AirStar 2 DVB-T", "Air2PC/AirStar 2 ATSC 1st generation", "Air2PC/AirStar 2 ATSC 2nd generation", @@ -61,21 +63,23 @@ static const char *flexcop_bus_names[] = { "PCI", }; -void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const - char *suffix) +void flexcop_device_name(struct flexcop_device *fc, + const char *prefix, const char *suffix) { - info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix, - flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type], - flexcop_revision_names[fc->rev],suffix); + info("%s '%s' at the '%s' bus controlled by a '%s' %s", + prefix, flexcop_device_names[fc->dev_type], + flexcop_bus_names[fc->bus_type], + flexcop_revision_names[fc->rev], suffix); } -void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num) +void flexcop_dump_reg(struct flexcop_device *fc, + flexcop_ibi_register reg, int num) { flexcop_ibi_value v; int i; for (i = 0; i < num; i++) { - v = fc->read_ibi_reg(fc,reg+4*i); - deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw); + v = fc->read_ibi_reg(fc, reg+4*i); + deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw); } deb_rdump("\n"); } diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 7599fccc1a5b..dc4528dcbb98 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -1,14 +1,11 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII - * - * see flexcop.c for copyright information. + * see flexcop.c for copyright information */ #ifndef __FLEXCOP_REG_H__ #define __FLEXCOP_REG_H__ - typedef enum { FLEXCOP_UNK = 0, FLEXCOP_II, @@ -18,13 +15,13 @@ typedef enum { typedef enum { FC_UNK = 0, - FC_AIR_DVB, + FC_CABLE, + FC_AIR_DVBT, FC_AIR_ATSC1, FC_AIR_ATSC2, - FC_SKY, - FC_SKY_OLD, - FC_CABLE, FC_AIR_ATSC3, + FC_SKY_REV23, + FC_SKY_REV26, FC_SKY_REV27, FC_SKY_REV28, } flexcop_device_type_t; @@ -36,12 +33,12 @@ typedef enum { /* FlexCop IBI Registers */ #if defined(__LITTLE_ENDIAN) - #include "flexcop_ibi_value_le.h" +#include "flexcop_ibi_value_le.h" #else #if defined(__BIG_ENDIAN) - #include "flexcop_ibi_value_be.h" +#include "flexcop_ibi_value_be.h" #else - #error no endian defined +#error no endian defined #endif #endif diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c index cda69528548a..f2199e43e803 100644 --- a/drivers/media/dvb/b2c2/flexcop-sram.c +++ b/drivers/media/dvb/b2c2/flexcop-sram.c @@ -1,45 +1,43 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-sram.c - functions for controlling the SRAM. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-sram.c - functions for controlling the SRAM + * see flexcop.c for copyright information */ #include "flexcop.h" -static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type) +static void flexcop_sram_set_chip(struct flexcop_device *fc, + flexcop_sram_type_t type) { - flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type); + flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type); } int flexcop_sram_init(struct flexcop_device *fc) { switch (fc->rev) { - case FLEXCOP_II: - case FLEXCOP_IIB: - flexcop_sram_set_chip(fc,FC_SRAM_1_32KB); - break; - case FLEXCOP_III: - flexcop_sram_set_chip(fc,FC_SRAM_1_48KB); - break; - default: - return -EINVAL; + case FLEXCOP_II: + case FLEXCOP_IIB: + flexcop_sram_set_chip(fc, FC_SRAM_1_32KB); + break; + case FLEXCOP_III: + flexcop_sram_set_chip(fc, FC_SRAM_1_48KB); + break; + default: + return -EINVAL; } return 0; } -int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target) +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, + flexcop_sram_dest_target_t target) { flexcop_ibi_value v; - - v = fc->read_ibi_reg(fc,sram_dest_reg_714); + v = fc->read_ibi_reg(fc, sram_dest_reg_714); if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) { err("SRAM destination target to available on FlexCopII(b)\n"); return -EINVAL; } - - deb_sram("sram dest: %x target: %x\n",dest, target); + deb_sram("sram dest: %x target: %x\n", dest, target); if (dest & FC_SRAM_DEST_NET) v.sram_dest_reg_714.NET_Dest = target; @@ -154,14 +152,12 @@ static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len else bank = 0x10000000; } - flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); } static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) { u32 bank; - bank = 0; if (adapter->dw_sram_type == 0x20000) { @@ -174,26 +170,22 @@ static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) else bank = 0x10000000; } - flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); } static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) { u32 length; - while (len != 0) { length = len; - - // check if the address range belongs to the same - // 32K memory chip. If not, the data is read from - // one chip at a time. + /* check if the address range belongs to the same + * 32K memory chip. If not, the data is read + * from one chip at a time */ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { length = (((addr >> 0x0f) + 1) << 0x0f) - addr; } sram_read_chunk(adapter, addr, buf, length); - addr = addr + length; buf = buf + length; len = len - length; @@ -203,19 +195,17 @@ static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) { u32 length; - while (len != 0) { length = len; - // check if the address range belongs to the same - // 32K memory chip. If not, the data is written to - // one chip at a time. + /* check if the address range belongs to the same + * 32K memory chip. If not, the data is + * written to one chip at a time */ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { length = (((addr >> 0x0f) + 1) << 0x0f) - addr; } sram_write_chunk(adapter, addr, buf, length); - addr = addr + length; buf = buf + length; len = len - length; @@ -224,39 +214,29 @@ static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) static void sram_set_size(struct adapter *adapter, u32 mask) { - write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); + write_reg_dw(adapter, 0x71c, + (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); } static void sram_init(struct adapter *adapter) { u32 tmp; - tmp = read_reg_dw(adapter, 0x71c); - write_reg_dw(adapter, 0x71c, 1); if (read_reg_dw(adapter, 0x71c) != 0) { write_reg_dw(adapter, 0x71c, tmp); - adapter->dw_sram_type = tmp & 0x30000; - ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); - } else { - adapter->dw_sram_type = 0x10000; - ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type); } - - /* return value is never used? */ -/* return adapter->dw_sram_type; */ } static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) { u8 tmp1, tmp2; - dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr); sram_set_size(adapter, mask); @@ -269,7 +249,6 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_write(adapter, addr + 4, &tmp1, 1); tmp2 = 0; - mdelay(20); sram_read(adapter, addr, &tmp2, 1); @@ -287,7 +266,6 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) sram_write(adapter, addr + 4, &tmp1, 1); tmp2 = 0; - mdelay(20); sram_read(adapter, addr, &tmp2, 1); @@ -297,26 +275,24 @@ static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) if (tmp2 != 0x5a) return 0; - return 1; } static u32 sram_length(struct adapter *adapter) { if (adapter->dw_sram_type == 0x10000) - return 32768; // 32K + return 32768; /* 32K */ if (adapter->dw_sram_type == 0x00000) - return 65536; // 64K + return 65536; /* 64K */ if (adapter->dw_sram_type == 0x20000) - return 131072; // 128K - - return 32768; // 32K + return 131072; /* 128K */ + return 32768; /* 32K */ } /* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. - - for 128K there are 4x32K chips at bank 0,1,2,3. - - for 64K there are 2x32K chips at bank 1,2. - - for 32K there is one 32K chip at bank 0. + - for 128K there are 4x32K chips at bank 0,1,2,3. + - for 64K there are 2x32K chips at bank 1,2. + - for 32K there is one 32K chip at bank 0. FlexCop works only with one bank at a time. The bank is selected by bits 28-29 of the 0x700 register. @@ -324,24 +300,18 @@ static u32 sram_length(struct adapter *adapter) bank 0 covers addresses 0x00000-0x07fff bank 1 covers addresses 0x08000-0x0ffff bank 2 covers addresses 0x10000-0x17fff - bank 3 covers addresses 0x18000-0x1ffff -*/ + bank 3 covers addresses 0x18000-0x1ffff */ static int flexcop_sram_detect(struct flexcop_device *fc) { - flexcop_ibi_value r208,r71c_0,vr71c_1; - + flexcop_ibi_value r208, r71c_0, vr71c_1; r208 = fc->read_ibi_reg(fc, ctrl_208); fc->write_ibi_reg(fc, ctrl_208, ibi_zero); r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c); - write_reg_dw(adapter, 0x71c, 1); - tmp3 = read_reg_dw(adapter, 0x71c); - dprintk("%s: tmp3 = %x\n", __func__, tmp3); - write_reg_dw(adapter, 0x71c, tmp2); // check for internal SRAM ??? @@ -350,9 +320,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_set_size(adapter, 0x10000); sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __func__); - return 32; } @@ -360,9 +328,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_set_size(adapter, 0x20000); sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 128K\n", __func__); - return 128; } @@ -370,9 +336,7 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_set_size(adapter, 0x00000); sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 64K\n", __func__); - return 64; } @@ -380,18 +344,14 @@ static int flexcop_sram_detect(struct flexcop_device *fc) sram_set_size(adapter, 0x10000); sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: sram size = 32K\n", __func__); - return 32; } sram_set_size(adapter, 0x10000); sram_init(adapter); write_reg_dw(adapter, 0x208, tmp); - dprintk("%s: SRAM detection failed. Set to 32K \n", __func__); - return 0; } diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h index 630e647a2caa..92529a9c4475 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.h +++ b/drivers/media/dvb/b2c2/flexcop-usb.h @@ -1,15 +1,20 @@ +/* + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-usb.h - header file for the USB part + * see flexcop.c for copyright information + */ #ifndef __FLEXCOP_USB_H_INCLUDED__ #define __FLEXCOP_USB_H_INCLUDED__ #include <linux/usb.h> /* transfer parameters */ -#define B2C2_USB_FRAMES_PER_ISO 4 -#define B2C2_USB_NUM_ISO_URB 4 +#define B2C2_USB_FRAMES_PER_ISO 4 +#define B2C2_USB_NUM_ISO_URB 4 -#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0) -#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0) -#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81) +#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0) +#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0) +#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81) struct flexcop_usb { struct usb_device *udev; @@ -18,8 +23,8 @@ struct flexcop_usb { u8 *iso_buffer; int buffer_size; dma_addr_t dma_addr; - struct urb *iso_urb[B2C2_USB_NUM_ISO_URB]; + struct urb *iso_urb[B2C2_USB_NUM_ISO_URB]; struct flexcop_device *fc_dev; u8 tmp_buffer[1023+190]; @@ -30,14 +35,6 @@ struct flexcop_usb { /* request types TODO What is its use?*/ typedef enum { -/* something is wrong with this part - RTYPE_READ_DW = (1 << 6), - RTYPE_WRITE_DW_1 = (3 << 6), - RTYPE_READ_V8_MEMORY = (6 << 6), - RTYPE_WRITE_V8_MEMORY = (7 << 6), - RTYPE_WRITE_V8_FLASH = (8 << 6), - RTYPE_GENERIC = (9 << 6), -*/ } flexcop_usb_request_type_t; #endif @@ -47,7 +44,6 @@ typedef enum { B2C2_USB_READ_V8_MEM = 0x05, B2C2_USB_READ_REG = 0x08, B2C2_USB_WRITE_REG = 0x0A, -/* B2C2_USB_WRITEREGLO = 0x0A, */ B2C2_USB_WRITEREGHI = 0x0B, B2C2_USB_FLASH_BLOCK = 0x10, B2C2_USB_I2C_REQUEST = 0x11, @@ -62,15 +58,13 @@ typedef enum { USB_FUNC_I2C_REPEATWRITE = 0x04, USB_FUNC_GET_DESCRIPTOR = 0x05, USB_FUNC_I2C_REPEATREAD = 0x06, -/* DKT 020208 - add this to support special case of DiSEqC */ + /* DKT 020208 - add this to support special case of DiSEqC */ USB_FUNC_I2C_CHECKWRITE = 0x07, USB_FUNC_I2C_CHECKRESULT = 0x08, } flexcop_usb_i2c_function_t; -/* - * function definition for UTILITY request 0x12 - * DKT 020304 - new utility function - */ +/* function definition for UTILITY request 0x12 + * DKT 020304 - new utility function */ typedef enum { UTILITY_SET_FILTER = 0x01, UTILITY_DATA_ENABLE = 0x02, @@ -84,7 +78,7 @@ typedef enum { UTILITY_DATA_RESET = 0x0A, UTILITY_GET_DATA_STATUS = 0x10, UTILITY_GET_V8_REG = 0x11, -/* DKT 020326 - add function for v1.14 */ + /* DKT 020326 - add function for v1.14 */ UTILITY_SRAM_WRITE = 0x12, UTILITY_SRAM_READ = 0x13, UTILITY_SRAM_TESTFILL = 0x14, @@ -92,13 +86,13 @@ typedef enum { UTILITY_SRAM_TESTVERIFY = 0x16, } flexcop_usb_utility_function_t; -#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */ -#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */ -#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */ +#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ) +#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ) +#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ) -#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */ -#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */ -#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ) +#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ) +#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ) typedef enum { V8_MEMORY_PAGE_DVB_CI = 0x20, @@ -107,13 +101,11 @@ typedef enum { V8_MEMORY_PAGE_FLASH = 0x80 } flexcop_usb_mem_page_t; -#define V8_MEMORY_EXTENDED (1 << 15) - -#define USB_MEM_READ_MAX 32 -#define USB_MEM_WRITE_MAX 1 -#define USB_FLASH_MAX 8 - -#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K -#define V8_MEMORY_PAGE_MASK 0x7FFF +#define V8_MEMORY_EXTENDED (1 << 15) +#define USB_MEM_READ_MAX 32 +#define USB_MEM_WRITE_MAX 1 +#define USB_FLASH_MAX 8 +#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */ +#define V8_MEMORY_PAGE_MASK 0x7FFF #endif diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index e836caecebbd..2df1b0214dcd 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -1,22 +1,20 @@ /* - * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de> - * - * based on the skystar2-driver - * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop.c - main module part + * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de> + * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc * * Acknowledgements: - * John Jurrius from BBTI, Inc. for extensive support with - * code examples and data books - * - * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) + * John Jurrius from BBTI, Inc. for extensive support + * with code examples and data books + * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) * * Contributions to the skystar2-driver have been done by - * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) - * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) - * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering) - * + * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) + * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) + * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu) + * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac + * filtering) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public License @@ -46,7 +44,10 @@ int b2c2_flexcop_debug; module_param_named(debug, b2c2_flexcop_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, + "set debug level (1=info,2=tuner,4=i2c,8=ts," + "16=sram,32=reg (|-able))." + DEBSTATUS); #undef DEBSTATUS DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -57,37 +58,36 @@ flexcop_ibi_value ibi_zero; static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) { struct flexcop_device *fc = dvbdmxfeed->demux->priv; - return flexcop_pid_feed_control(fc,dvbdmxfeed,1); + return flexcop_pid_feed_control(fc, dvbdmxfeed, 1); } static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) { struct flexcop_device *fc = dvbdmxfeed->demux->priv; - return flexcop_pid_feed_control(fc,dvbdmxfeed,0); + return flexcop_pid_feed_control(fc, dvbdmxfeed, 0); } static int flexcop_dvb_init(struct flexcop_device *fc) { int ret = dvb_register_adapter(&fc->dvb_adapter, - "FlexCop Digital TV device", fc->owner, - fc->dev, adapter_nr); + "FlexCop Digital TV device", fc->owner, + fc->dev, adapter_nr); if (ret < 0) { err("error registering DVB adapter"); return ret; } fc->dvb_adapter.priv = fc; - fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING + | DMX_MEMORY_BASED_FILTERING); fc->demux.priv = fc; - fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; - fc->demux.start_feed = flexcop_dvb_start_feed; fc->demux.stop_feed = flexcop_dvb_stop_feed; fc->demux.write_to_decoder = NULL; if ((ret = dvb_dmx_init(&fc->demux)) < 0) { - err("dvb_dmx failed: error %d",ret); + err("dvb_dmx failed: error %d", ret); goto err_dmx; } @@ -97,23 +97,23 @@ static int flexcop_dvb_init(struct flexcop_device *fc) fc->dmxdev.demux = &fc->demux.dmx; fc->dmxdev.capabilities = 0; if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) { - err("dvb_dmxdev_init failed: error %d",ret); + err("dvb_dmxdev_init failed: error %d", ret); goto err_dmx_dev; } if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { - err("adding hw_frontend to dmx failed: error %d",ret); + err("adding hw_frontend to dmx failed: error %d", ret); goto err_dmx_add_hw_frontend; } fc->mem_frontend.source = DMX_MEMORY_FE; if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) { - err("adding mem_frontend to dmx failed: error %d",ret); + err("adding mem_frontend to dmx failed: error %d", ret); goto err_dmx_add_mem_frontend; } if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { - err("connect frontend failed: error %d",ret); + err("connect frontend failed: error %d", ret); goto err_connect_frontend; } @@ -123,9 +123,9 @@ static int flexcop_dvb_init(struct flexcop_device *fc) return 0; err_connect_frontend: - fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend); err_dmx_add_mem_frontend: - fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend); err_dmx_add_hw_frontend: dvb_dmxdev_release(&fc->dmxdev); err_dmx_dev: @@ -141,12 +141,13 @@ static void flexcop_dvb_exit(struct flexcop_device *fc) dvb_net_release(&fc->dvbnet); fc->demux.dmx.close(&fc->demux.dmx); - fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); - fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, + &fc->mem_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx, + &fc->hw_frontend); dvb_dmxdev_release(&fc->dmxdev); dvb_dmx_release(&fc->demux); dvb_unregister_adapter(&fc->dvb_adapter); - deb_info("deinitialized dvb stuff\n"); } fc->init_state &= ~FC_STATE_DVB_INIT; @@ -168,9 +169,9 @@ EXPORT_SYMBOL(flexcop_pass_dmx_packets); static void flexcop_reset(struct flexcop_device *fc) { - flexcop_ibi_value v210,v204; + flexcop_ibi_value v210, v204; -/* reset the flexcop itself */ + /* reset the flexcop itself */ fc->write_ibi_reg(fc,ctrl_208,ibi_zero); v210.raw = 0; @@ -183,13 +184,11 @@ static void flexcop_reset(struct flexcop_device *fc) v210.sw_reset_210.reset_block_600 = 1; v210.sw_reset_210.reset_block_700 = 1; v210.sw_reset_210.Block_reset_enable = 0xb2; - v210.sw_reset_210.Special_controls = 0xc259; - fc->write_ibi_reg(fc,sw_reset_210,v210); msleep(1); -/* reset the periphical devices */ + /* reset the periphical devices */ v204 = fc->read_ibi_reg(fc,misc_204); v204.misc_204.Per_reset_sig = 0; @@ -201,11 +200,10 @@ static void flexcop_reset(struct flexcop_device *fc) void flexcop_reset_block_300(struct flexcop_device *fc) { - flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208), - v210 = fc->read_ibi_reg(fc,sw_reset_210); - - deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw); + flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208), + v210 = fc->read_ibi_reg(fc, sw_reset_210); + deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw); fc->write_ibi_reg(fc,ctrl_208,ibi_zero); v210.sw_reset_210.reset_block_300 = 1; @@ -218,7 +216,8 @@ void flexcop_reset_block_300(struct flexcop_device *fc) struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) { void *bus; - struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), GFP_KERNEL); + struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), + GFP_KERNEL); if (!fc) { err("no memory"); return NULL; @@ -253,7 +252,6 @@ int flexcop_device_initialize(struct flexcop_device *fc) flexcop_determine_revision(fc); flexcop_sram_init(fc); flexcop_hw_filter_init(fc); - flexcop_smc_ctrl(fc, 0); if ((ret = flexcop_dvb_init(fc))) @@ -278,7 +276,6 @@ int flexcop_device_initialize(struct flexcop_device *fc) goto error; flexcop_device_name(fc,"initialization of","complete"); - return 0; error: diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h index 0cebe1d92e0b..897b10c85ad9 100644 --- a/drivers/media/dvb/b2c2/flexcop.h +++ b/drivers/media/dvb/b2c2/flexcop.h @@ -1,9 +1,7 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop.h - private header file for all flexcop-chip-source files. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop.h - private header file for all flexcop-chip-source files + * see flexcop.c for copyright information */ #ifndef __FLEXCOP_H__ #define __FLEXCOP_H___ @@ -21,11 +19,11 @@ extern int b2c2_flexcop_debug; #define dprintk(level,args...) #endif -#define deb_info(args...) dprintk(0x01,args) -#define deb_tuner(args...) dprintk(0x02,args) -#define deb_i2c(args...) dprintk(0x04,args) -#define deb_ts(args...) dprintk(0x08,args) -#define deb_sram(args...) dprintk(0x10,args) -#define deb_rdump(args...) dprintk(0x20,args) +#define deb_info(args...) dprintk(0x01, args) +#define deb_tuner(args...) dprintk(0x02, args) +#define deb_i2c(args...) dprintk(0x04, args) +#define deb_ts(args...) dprintk(0x08, args) +#define deb_sram(args...) dprintk(0x10, args) +#define deb_rdump(args...) dprintk(0x20, args) #endif diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h index ed9a6756b194..8f64bdbd72bb 100644 --- a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h @@ -1,10 +1,7 @@ -/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III - * +/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III * register descriptions - * - * see flexcop.c for copyright information. + * see flexcop.c for copyright information */ - /* This file is automatically generated, do not edit things here. */ #ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ #define __FLEXCOP_IBI_VALUE_INCLUDED__ diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h index 49f2315b6e58..c75830d7d942 100644 --- a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h @@ -1,10 +1,7 @@ -/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III - * +/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III * register descriptions - * - * see flexcop.c for copyright information. + * see flexcop.c for copyright information */ - /* This file is automatically generated, do not edit things here. */ #ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ #define __FLEXCOP_IBI_VALUE_INCLUDED__ |