diff options
Diffstat (limited to 'drivers/macintosh/macserial.c')
| -rw-r--r-- | drivers/macintosh/macserial.c | 3036 |
1 files changed, 0 insertions, 3036 deletions
diff --git a/drivers/macintosh/macserial.c b/drivers/macintosh/macserial.c deleted file mode 100644 index 0be3ac6cc169..000000000000 --- a/drivers/macintosh/macserial.c +++ /dev/null @@ -1,3036 +0,0 @@ -/* - * macserial.c: Serial port driver for Power Macintoshes. - * - * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. - * - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * Receive DMA code by Takashi Oe <toe@unlserve.unl.edu>. - * - * $Id: macserial.c,v 1.24.2.4 1999/10/19 04:36:42 paulus Exp $ - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/workqueue.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#ifdef CONFIG_SERIAL_CONSOLE -#include <linux/console.h> -#endif -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/system.h> -#include <asm/segment.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#ifdef CONFIG_KGDB -#include <asm/kgdb.h> -#endif -#include <asm/dbdma.h> - -#include "macserial.h" - -#ifdef CONFIG_PMAC_PBOOK -static int serial_notify_sleep(struct pmu_sleep_notifier *self, int when); -static struct pmu_sleep_notifier serial_sleep_notifier = { - serial_notify_sleep, - SLEEP_LEVEL_MISC, -}; -#endif - -#define SUPPORT_SERIAL_DMA -#define MACSERIAL_VERSION "2.0" - -/* - * It would be nice to dynamically allocate everything that - * depends on NUM_SERIAL, so we could support any number of - * Z8530s, but for now... - */ -#define NUM_SERIAL 2 /* Max number of ZS chips supported */ -#define NUM_CHANNELS (NUM_SERIAL * 2) /* 2 channels per chip */ - -/* On PowerMacs, the hardware takes care of the SCC recovery time, - but we need the eieio to make sure that the accesses occur - in the order we want. */ -#define RECOVERY_DELAY eieio() - -static struct tty_driver *serial_driver; - -struct mac_zschannel zs_channels[NUM_CHANNELS]; - -struct mac_serial zs_soft[NUM_CHANNELS]; -int zs_channels_found; -struct mac_serial *zs_chain; /* list of all channels */ - -struct tty_struct zs_ttys[NUM_CHANNELS]; - -static int is_powerbook; - -#ifdef CONFIG_SERIAL_CONSOLE -static struct console sercons; -#endif - -#ifdef CONFIG_KGDB -struct mac_zschannel *zs_kgdbchan; -static unsigned char scc_inittab[] = { - 9, 0x80, /* reset A side (CHRA) */ - 13, 0, /* set baud rate divisor */ - 12, 1, - 14, 1, /* baud rate gen enable, src=rtxc (BRENABL) */ - 11, 0x50, /* clocks = br gen (RCBR | TCBR) */ - 5, 0x6a, /* tx 8 bits, assert RTS (Tx8 | TxENAB | RTS) */ - 4, 0x44, /* x16 clock, 1 stop (SB1 | X16CLK)*/ - 3, 0xc1, /* rx enable, 8 bits (RxENABLE | Rx8)*/ -}; -#endif -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ - -/* serial subtype definitions */ -#define SERIAL_TYPE_NORMAL 1 - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* - * Debugging. - */ -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW -#undef SERIAL_DEBUG_POWER -#undef SERIAL_DEBUG_THROTTLE -#undef SERIAL_DEBUG_STOP -#undef SERIAL_DEBUG_BAUDS - -#define RS_STROBE_TIME 10 -#define RS_ISR_PASS_LIMIT 256 - -#define _INLINE_ inline - -#ifdef SERIAL_DEBUG_OPEN -#define OPNDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) -#else -#define OPNDBG(fmt, arg...) do { } while (0) -#endif -#ifdef SERIAL_DEBUG_POWER -#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) -#else -#define PWRDBG(fmt, arg...) do { } while (0) -#endif -#ifdef SERIAL_DEBUG_BAUDS -#define BAUDBG(fmt, arg...) printk(fmt , ## arg) -#else -#define BAUDBG(fmt, arg...) do { } while (0) -#endif - -static void probe_sccs(void); -static void change_speed(struct mac_serial *info, struct termios *old); -static void rs_wait_until_sent(struct tty_struct *tty, int timeout); -static int set_scc_power(struct mac_serial * info, int state); -static int setup_scc(struct mac_serial * info); -static void dbdma_reset(volatile struct dbdma_regs *dma); -static void dbdma_flush(volatile struct dbdma_regs *dma); -static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs); -static void dma_init(struct mac_serial * info); -static void rxdma_start(struct mac_serial * info, int curr); -static void rxdma_to_tty(struct mac_serial * info); - -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); - - -static inline int __pmac -serial_paranoia_check(struct mac_serial *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char badmagic[] = KERN_WARNING - "Warning: bad magic number for serial struct %s in %s\n"; - static const char badinfo[] = KERN_WARNING - "Warning: null mac_serial for %s in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * Reading and writing Z8530 registers. - */ -static inline unsigned char __pmac read_zsreg(struct mac_zschannel *channel, - unsigned char reg) -{ - unsigned char retval; - unsigned long flags; - - /* - * We have to make this atomic. - */ - spin_lock_irqsave(&channel->lock, flags); - if (reg != 0) { - *channel->control = reg; - RECOVERY_DELAY; - } - retval = *channel->control; - RECOVERY_DELAY; - spin_unlock_irqrestore(&channel->lock, flags); - return retval; -} - -static inline void __pmac write_zsreg(struct mac_zschannel *channel, - unsigned char reg, unsigned char value) -{ - unsigned long flags; - - spin_lock_irqsave(&channel->lock, flags); - if (reg != 0) { - *channel->control = reg; - RECOVERY_DELAY; - } - *channel->control = value; - RECOVERY_DELAY; - spin_unlock_irqrestore(&channel->lock, flags); - return; -} - -static inline unsigned char __pmac read_zsdata(struct mac_zschannel *channel) -{ - unsigned char retval; - - retval = *channel->data; - RECOVERY_DELAY; - return retval; -} - -static inline void write_zsdata(struct mac_zschannel *channel, - unsigned char value) -{ - *channel->data = value; - RECOVERY_DELAY; - return; -} - -static inline void load_zsregs(struct mac_zschannel *channel, - unsigned char *regs) -{ - ZS_CLEARERR(channel); - ZS_CLEARFIFO(channel); - /* Load 'em up */ - write_zsreg(channel, R4, regs[R4]); - write_zsreg(channel, R10, regs[R10]); - write_zsreg(channel, R3, regs[R3] & ~RxENABLE); - write_zsreg(channel, R5, regs[R5] & ~TxENAB); - write_zsreg(channel, R1, regs[R1]); - write_zsreg(channel, R9, regs[R9]); - write_zsreg(channel, R11, regs[R11]); - write_zsreg(channel, R12, regs[R12]); - write_zsreg(channel, R13, regs[R13]); - write_zsreg(channel, R14, regs[R14]); - write_zsreg(channel, R15, regs[R15]); - write_zsreg(channel, R3, regs[R3]); - write_zsreg(channel, R5, regs[R5]); - return; -} - -/* Sets or clears DTR/RTS on the requested line */ -static inline void zs_rtsdtr(struct mac_serial *ss, int set) -{ - if (set) - ss->curregs[5] |= (RTS | DTR); - else - ss->curregs[5] &= ~(RTS | DTR); - write_zsreg(ss->zs_channel, 5, ss->curregs[5]); - return; -} - -/* Utility routines for the Zilog */ -static inline int get_zsbaud(struct mac_serial *ss) -{ - struct mac_zschannel *channel = ss->zs_channel; - int brg; - - if ((ss->curregs[R11] & TCBR) == 0) { - /* higher rates don't use the baud rate generator */ - return (ss->curregs[R4] & X32CLK)? ZS_CLOCK/32: ZS_CLOCK/16; - } - /* The baud rate is split up between two 8-bit registers in - * what is termed 'BRG time constant' format in my docs for - * the chip, it is a function of the clk rate the chip is - * receiving which happens to be constant. - */ - brg = (read_zsreg(channel, 13) << 8); - brg |= read_zsreg(channel, 12); - return BRG_TO_BPS(brg, (ZS_CLOCK/(ss->clk_divisor))); -} - -/* On receive, this clears errors and the receiver interrupts */ -static inline void rs_recv_clear(struct mac_zschannel *zsc) -{ - write_zsreg(zsc, 0, ERR_RES); - write_zsreg(zsc, 0, RES_H_IUS); /* XXX this is unnecessary */ -} - -/* - * Reset a Descriptor-Based DMA channel. - */ -static void dbdma_reset(volatile struct dbdma_regs *dma) -{ - int i; - - out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16); - - /* - * Yes this looks peculiar, but apparently it needs to be this - * way on some machines. (We need to make sure the DBDMA - * engine has actually got the write above and responded - * to it. - paulus) - */ - for (i = 200; i > 0; --i) - if (ld_le32(&dma->status) & RUN) - udelay(1); -} - -/* - * Tells a DBDMA channel to stop and write any buffered data - * it might have to memory. - */ -static _INLINE_ void dbdma_flush(volatile struct dbdma_regs *dma) -{ - int i = 0; - - out_le32(&dma->control, (FLUSH << 16) | FLUSH); - while (((in_le32(&dma->status) & FLUSH) != 0) && (i++ < 100)) - udelay(1); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static _INLINE_ void rs_sched_event(struct mac_serial *info, - int event) -{ - info->event |= 1 << event; - schedule_work(&info->tqueue); -} - -/* Work out the flag value for a z8530 status value. */ -static _INLINE_ int stat_to_flag(int stat) -{ - int flag; - - if (stat & Rx_OVR) { - flag = TTY_OVERRUN; - } else if (stat & FRM_ERR) { - flag = TTY_FRAME; - } else if (stat & PAR_ERR) { - flag = TTY_PARITY; - } else - flag = 0; - return flag; -} - -static _INLINE_ void receive_chars(struct mac_serial *info, - struct pt_regs *regs) -{ - struct tty_struct *tty = info->tty; - unsigned char ch, stat, flag; - - while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) != 0) { - - stat = read_zsreg(info->zs_channel, R1); - ch = read_zsdata(info->zs_channel); - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) { - if (ch == 0x03 || ch == '$') - breakpoint(); - if (stat & (Rx_OVR|FRM_ERR|PAR_ERR)) - write_zsreg(info->zs_channel, 0, ERR_RES); - return; - } -#endif - if (!tty) - continue; - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - tty_flip_buffer_push(tty); - - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { - static int flip_buf_ovf; - if (++flip_buf_ovf <= 1) - printk(KERN_WARNING "FB. overflow: %d\n", - flip_buf_ovf); - break; - } - tty->flip.count++; - { - static int flip_max_cnt; - if (flip_max_cnt < tty->flip.count) - flip_max_cnt = tty->flip.count; - } - flag = stat_to_flag(stat); - if (flag) - /* reset the error indication */ - write_zsreg(info->zs_channel, 0, ERR_RES); - *tty->flip.flag_buf_ptr++ = flag; - *tty->flip.char_buf_ptr++ = ch; - } - if (tty) - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct mac_serial *info) -{ - if ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) - return; - info->tx_active = 0; - - if (info->x_char && !info->power_wait) { - /* Send next char */ - write_zsdata(info->zs_channel, info->x_char); - info->x_char = 0; - info->tx_active = 1; - return; - } - - if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tx_stopped - || info->power_wait) { - write_zsreg(info->zs_channel, 0, RES_Tx_P); - return; - } - - /* Send char */ - write_zsdata(info->zs_channel, info->xmit_buf[info->xmit_tail++]); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - info->tx_active = 1; - - if (info->xmit_cnt < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); -} - -static void powerup_done(unsigned long data) -{ - struct mac_serial *info = (struct mac_serial *) data; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - info->power_wait = 0; - transmit_chars(info); - spin_unlock_irqrestore(&info->lock, flags); -} - -static _INLINE_ void status_handle(struct mac_serial *info) -{ - unsigned char status; - - /* Get status from Read Register 0 */ - status = read_zsreg(info->zs_channel, 0); - - /* Check for DCD transitions */ - if (((status ^ info->read_reg_zero) & DCD) != 0 - && info->tty && !C_CLOCAL(info->tty)) { - if (status & DCD) { - wake_up_interruptible(&info->open_wait); - } else { - if (info->tty) - tty_hangup(info->tty); - } - } - - /* Check for CTS transitions */ - if (info->tty && C_CRTSCTS(info->tty)) { - /* - * For some reason, on the Power Macintosh, - * it seems that the CTS bit is 1 when CTS is - * *negated* and 0 when it is asserted. - * The DCD bit doesn't seem to be inverted - * like this. - */ - if ((status & CTS) == 0) { - if (info->tx_stopped) { -#ifdef SERIAL_DEBUG_FLOW - printk(KERN_DEBUG "CTS up\n"); -#endif - info->tx_stopped = 0; - if (!info->tx_active) - transmit_chars(info); - } - } else { -#ifdef SERIAL_DEBUG_FLOW - printk(KERN_DEBUG "CTS down\n"); -#endif - info->tx_stopped = 1; - } - } - - /* Clear status condition... */ - write_zsreg(info->zs_channel, 0, RES_EXT_INT); - info->read_reg_zero = status; -} - -static _INLINE_ void receive_special_dma(struct mac_serial *info) -{ - unsigned char stat, flag; - volatile struct dbdma_regs *rd = &info->rx->dma; - int where = RX_BUF_SIZE; - - spin_lock(&info->rx_dma_lock); - if ((ld_le32(&rd->status) & ACTIVE) != 0) - dbdma_flush(rd); - if (in_le32(&rd->cmdptr) - == virt_to_bus(info->rx_cmds[info->rx_cbuf] + 1)) - where -= in_le16(&info->rx->res_count); - where--; - - stat = read_zsreg(info->zs_channel, R1); - - flag = stat_to_flag(stat); - if (flag) { - info->rx_flag_buf[info->rx_cbuf][where] = flag; - /* reset the error indication */ - write_zsreg(info->zs_channel, 0, ERR_RES); - } - - spin_unlock(&info->rx_dma_lock); -} - -/* - * This is the serial driver's generic interrupt routine - */ -static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) -{ - struct mac_serial *info = (struct mac_serial *) dev_id; - unsigned char zs_intreg; - int shift; - unsigned long flags; - int handled = 0; - - if (!(info->flags & ZILOG_INITIALIZED)) { - printk(KERN_WARNING "rs_interrupt: irq %d, port not " - "initialized\n", irq); - disable_irq(irq); - return IRQ_NONE; - } - - /* NOTE: The read register 3, which holds the irq status, - * does so for both channels on each chip. Although - * the status value itself must be read from the A - * channel and is only valid when read from channel A. - * Yes... broken hardware... - */ -#define CHAN_IRQMASK (CHBRxIP | CHBTxIP | CHBEXT) - - if (info->zs_chan_a == info->zs_channel) - shift = 3; /* Channel A */ - else - shift = 0; /* Channel B */ - - spin_lock_irqsave(&info->lock, flags); - for (;;) { - zs_intreg = read_zsreg(info->zs_chan_a, 3) >> shift; -#ifdef SERIAL_DEBUG_INTR - printk(KERN_DEBUG "rs_interrupt: irq %d, zs_intreg 0x%x\n", - irq, (int)zs_intreg); -#endif - - if ((zs_intreg & CHAN_IRQMASK) == 0) - break; - handled = 1; - - if (zs_intreg & CHBRxIP) { - /* If we are doing DMA, we only ask for interrupts - on characters with errors or special conditions. */ - if (info->dma_initted) - receive_special_dma(info); - else - receive_chars(info, regs); - } - if (zs_intreg & CHBTxIP) - transmit_chars(info); - if (zs_intreg & CHBEXT) - status_handle(info); - } - spin_unlock_irqrestore(&info->lock, flags); - return IRQ_RETVAL(handled); -} - -/* Transmit DMA interrupt - not used at present */ -static irqreturn_t rs_txdma_irq(int irq, void *dev_id, struct pt_regs *regs) -{ - return IRQ_HANDLED; -} - -/* - * Receive DMA interrupt. - */ -static irqreturn_t rs_rxdma_irq(int irq, void *dev_id, struct pt_regs *regs) -{ - struct mac_serial *info = (struct mac_serial *) dev_id; - volatile struct dbdma_cmd *cd; - - if (!info->dma_initted) - return IRQ_NONE; - spin_lock(&info->rx_dma_lock); - /* First, confirm that this interrupt is, indeed, coming */ - /* from Rx DMA */ - cd = info->rx_cmds[info->rx_cbuf] + 2; - if ((in_le16(&cd->xfer_status) & (RUN | ACTIVE)) != (RUN | ACTIVE)) { - spin_unlock(&info->rx_dma_lock); - return IRQ_NONE; - } - if (info->rx_fbuf != RX_NO_FBUF) { - info->rx_cbuf = info->rx_fbuf; - if (++info->rx_fbuf == info->rx_nbuf) - info->rx_fbuf = 0; - if (info->rx_fbuf == info->rx_ubuf) - info->rx_fbuf = RX_NO_FBUF; - } - spin_unlock(&info->rx_dma_lock); - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - -#ifdef SERIAL_DEBUG_STOP - printk(KERN_DEBUG "rs_stop %ld....\n", - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - -#if 0 - spin_lock_irqsave(&info->lock, flags); - if (info->curregs[5] & TxENAB) { - info->curregs[5] &= ~TxENAB; - info->pendregs[5] &= ~TxENAB; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - } - spin_unlock_irqrestore(&info->lock, flags); -#endif -} - -static void rs_start(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; - -#ifdef SERIAL_DEBUG_STOP - printk(KERN_DEBUG "rs_start %ld....\n", - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - spin_lock_irqsave(&info->lock, flags); -#if 0 - if (info->xmit_cnt && info->xmit_buf && !(info->curregs[5] & TxENAB)) { - info->curregs[5] |= TxENAB; - info->pendregs[5] = info->curregs[5]; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - } -#else - if (info->xmit_cnt && info->xmit_buf && !info->tx_active) { - transmit_chars(info); - } -#endif - spin_unlock_irqrestore(&info->lock, flags); -} - -static void do_softint(void *private_) -{ - struct mac_serial *info = (struct mac_serial *) private_; - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -static int startup(struct mac_serial * info) -{ - int delay; - - OPNDBG("startup() (ttyS%d, irq %d)\n", info->line, info->irq); - - if (info->flags & ZILOG_INITIALIZED) { - OPNDBG(" -> already inited\n"); - return 0; - } - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); - if (!info->xmit_buf) - return -ENOMEM; - } - - OPNDBG("starting up ttyS%d (irq %d)...\n", info->line, info->irq); - - delay = set_scc_power(info, 1); - - setup_scc(info); - - if (delay) { - unsigned long flags; - - /* delay is in ms */ - spin_lock_irqsave(&info->lock, flags); - info->power_wait = 1; - mod_timer(&info->powerup_timer, - jiffies + (delay * HZ + 999) / 1000); - spin_unlock_irqrestore(&info->lock, flags); - } - - OPNDBG("enabling IRQ on ttyS%d (irq %d)...\n", info->line, info->irq); - - info->flags |= ZILOG_INITIALIZED; - enable_irq(info->irq); - if (info->dma_initted) { - enable_irq(info->rx_dma_irq); - } - - return 0; -} - -static _INLINE_ void rxdma_start(struct mac_serial * info, int curr) -{ - volatile struct dbdma_regs *rd = &info->rx->dma; - volatile struct dbdma_cmd *cd = info->rx_cmds[curr]; - -//printk(KERN_DEBUG "SCC: rxdma_start\n"); - - st_le32(&rd->cmdptr, virt_to_bus(cd)); - out_le32(&rd->control, (RUN << 16) | RUN); -} - -static void rxdma_to_tty(struct mac_serial *info) -{ - struct tty_struct *tty = info->tty; - volatile struct dbdma_regs *rd = &info->rx->dma; - unsigned long flags; - int residue, available, space, do_queue; - - if (!tty) - return; - - do_queue = 0; - spin_lock_irqsave(&info->rx_dma_lock, flags); -more: - space = TTY_FLIPBUF_SIZE - tty->flip.count; - if (!space) { - do_queue++; - goto out; - } - residue = 0; - if (info->rx_ubuf == info->rx_cbuf) { - if ((ld_le32(&rd->status) & ACTIVE) != 0) { - dbdma_flush(rd); - if (in_le32(&rd->cmdptr) - == virt_to_bus(info->rx_cmds[info->rx_cbuf]+1)) - residue = in_le16(&info->rx->res_count); - } - } - available = RX_BUF_SIZE - residue - info->rx_done_bytes; - if (available > space) - available = space; - if (available) { - memcpy(tty->flip.char_buf_ptr, - info->rx_char_buf[info->rx_ubuf] + info->rx_done_bytes, - available); - memcpy(tty->flip.flag_buf_ptr, - info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes, - available); - tty->flip.char_buf_ptr += available; - tty->flip.count += available; - tty->flip.flag_buf_ptr += available; - memset(info->rx_flag_buf[info->rx_ubuf] + info->rx_done_bytes, - 0, available); - info->rx_done_bytes += available; - do_queue++; - } - if (info->rx_done_bytes == RX_BUF_SIZE) { - volatile struct dbdma_cmd *cd = info->rx_cmds[info->rx_ubuf]; - - if (info->rx_ubuf == info->rx_cbuf) - goto out; - /* mark rx_char_buf[rx_ubuf] free */ - st_le16(&cd->command, DBDMA_NOP); - cd++; - st_le32(&cd->cmd_dep, 0); - st_le32((unsigned int *)&cd->res_count, 0); - cd++; - st_le16(&cd->xfer_status, 0); - - if (info->rx_fbuf == RX_NO_FBUF) { - info->rx_fbuf = info->rx_ubuf; - if (!(ld_le32(&rd->status) & ACTIVE)) { - dbdma_reset(&info->rx->dma); - rxdma_start(info, info->rx_ubuf); - info->rx_cbuf = info->rx_ubuf; - } - } - info->rx_done_bytes = 0; - if (++info->rx_ubuf == info->rx_nbuf) - info->rx_ubuf = 0; - if (info->rx_fbuf == info->rx_ubuf) - info->rx_fbuf = RX_NO_FBUF; - goto more; - } -out: - spin_unlock_irqrestore(&info->rx_dma_lock, flags); - if (do_queue) - tty_flip_buffer_push(tty); -} - -static void poll_rxdma(unsigned long private_) -{ - struct mac_serial *info = (struct mac_serial *) private_; - unsigned long flags; - - rxdma_to_tty(info); - spin_lock_irqsave(&info->rx_dma_lock, flags); - mod_timer(&info->poll_dma_timer, RX_DMA_TIMER); - spin_unlock_irqrestore(&info->rx_dma_lock, flags); -} - -static void dma_init(struct mac_serial * info) -{ - int i, size; - volatile struct dbdma_cmd *cd; - unsigned char *p; - - info->rx_nbuf = 8; - - /* various mem set up */ - size = sizeof(struct dbdma_cmd) * (3 * info->rx_nbuf + 2) - + (RX_BUF_SIZE * 2 + sizeof(*info->rx_cmds) - + sizeof(*info->rx_char_buf) + sizeof(*info->rx_flag_buf)) - * info->rx_nbuf; - info->dma_priv = kmalloc(size, GFP_KERNEL | GFP_DMA); - if (info->dma_priv == NULL) - return; - memset(info->dma_priv, 0, size); - - info->rx_cmds = (volatile struct dbdma_cmd **)info->dma_priv; - info->rx_char_buf = (unsigned char **) (info->rx_cmds + info->rx_nbuf); - info->rx_flag_buf = info->rx_char_buf + info->rx_nbuf; - p = (unsigned char *) (info->rx_flag_buf + info->rx_nbuf); - for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE) - info->rx_char_buf[i] = p; - for (i = 0; i < info->rx_nbuf; i++, p += RX_BUF_SIZE) - info->rx_flag_buf[i] = p; - - /* a bit of DMA programming */ - cd = info->rx_cmds[0] = (volatile struct dbdma_cmd *) DBDMA_ALIGN(p); - st_le16(&cd->command, DBDMA_NOP); - cd++; - st_le16(&cd->req_count, RX_BUF_SIZE); - st_le16(&cd->command, INPUT_MORE); - st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[0])); - cd++; - st_le16(&cd->req_count, 4); - st_le16(&cd->command, STORE_WORD | INTR_ALWAYS); - st_le32(&cd->phy_addr, virt_to_bus(cd-2)); - st_le32(&cd->cmd_dep, DBDMA_STOP); - for (i = 1; i < info->rx_nbuf; i++) { - info->rx_cmds[i] = ++cd; - st_le16(&cd->command, DBDMA_NOP); - cd++; - st_le16(&cd->req_count, RX_BUF_SIZE); - st_le16(&cd->command, INPUT_MORE); - st_le32(&cd->phy_addr, virt_to_bus(info->rx_char_buf[i])); - cd++; - st_le16(&cd->req_count, 4); - st_le16(&cd->command, STORE_WORD | INTR_ALWAYS); - st_le32(&cd->phy_addr, virt_to_bus(cd-2)); - st_le32(&cd->cmd_dep, DBDMA_STOP); - } - cd++; - st_le16(&cd->command, DBDMA_NOP | BR_ALWAYS); - st_le32(&cd->cmd_dep, virt_to_bus(info->rx_cmds[0])); - - /* setup DMA to our liking */ - dbdma_reset(&info->rx->dma); - st_le32(&info->rx->dma.intr_sel, 0x10001); - st_le32(&info->rx->dma.br_sel, 0x10001); - out_le32(&info->rx->dma.wait_sel, 0x10001); - - /* set various flags */ - info->rx_ubuf = 0; - info->rx_cbuf = 0; - info->rx_fbuf = info->rx_ubuf + 1; - if (info->rx_fbuf == info->rx_nbuf) - info->rx_fbuf = RX_NO_FBUF; - info->rx_done_bytes = 0; - - /* setup polling */ - init_timer(&info->poll_dma_timer); - info->poll_dma_timer.function = (void *)&poll_rxdma; - info->poll_dma_timer.data = (unsigned long)info; - - info->dma_initted = 1; -} - -/* - * FixZeroBug....Works around a bug in the SCC receving channel. - * Taken from Darwin code, 15 Sept. 2000 -DanM - * - * The following sequence prevents a problem that is seen with O'Hare ASICs - * (most versions -- also with some Heathrow and Hydra ASICs) where a zero - * at the input to the receiver becomes 'stuck' and locks up the receiver. - * This problem can occur as a result of a zero bit at the receiver input - * coincident with any of the following events: - * - * The SCC is initialized (hardware or software). - * A framing error is detected. - * The clocking option changes from synchronous or X1 asynchronous - * clocking to X16, X32, or X64 asynchronous clocking. - * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. - * - * This workaround attempts to recover from the lockup condition by placing - * the SCC in synchronous loopback mode with a fast clock before programming - * any of the asynchronous modes. - */ -static void fix_zero_bug_scc(struct mac_serial * info) -{ - write_zsreg(info->zs_channel, 9, - (info->zs_channel == info->zs_chan_a? CHRA: CHRB)); - udelay(10); - write_zsreg(info->zs_channel, 9, - ((info->zs_channel == info->zs_chan_a? CHRA: CHRB) | NV)); - - write_zsreg(info->zs_channel, 4, (X1CLK | EXTSYNC)); - - /* I think this is wrong....but, I just copying code.... - */ - write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE)); - - write_zsreg(info->zs_channel, 5, (8 & ~TxENAB)); - write_zsreg(info->zs_channel, 9, NV); /* Didn't we already do this? */ - write_zsreg(info->zs_channel, 11, (RCBR | TCBR)); - write_zsreg(info->zs_channel, 12, 0); - write_zsreg(info->zs_channel, 13, 0); - write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR)); - write_zsreg(info->zs_channel, 14, (LOOPBAK | SSBR | BRENABL)); - write_zsreg(info->zs_channel, 3, (8 | RxENABLE)); - write_zsreg(info->zs_channel, 0, RES_EXT_INT); - write_zsreg(info->zs_channel, 0, RES_EXT_INT); /* to kill some time */ - - /* The channel should be OK now, but it is probably receiving - * loopback garbage. - * Switch to asynchronous mode, disable the receiver, - * and discard everything in the receive buffer. - */ - write_zsreg(info->zs_channel, 9, NV); - write_zsreg(info->zs_channel, 4, PAR_ENA); - write_zsreg(info->zs_channel, 3, (8 & ~RxENABLE)); - - while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV) { - (void)read_zsreg(info->zs_channel, 8); - write_zsreg(info->zs_channel, 0, RES_EXT_INT); - write_zsreg(info->zs_channel, 0, ERR_RES); - } -} - -static int setup_scc(struct mac_serial * info) -{ - unsigned long flags; - - OPNDBG("setting up ttyS%d SCC...\n", info->line); - - spin_lock_irqsave(&info->lock, flags); - - /* Nice buggy HW ... */ - fix_zero_bug_scc(info); - - /* - * Reset the chip. - */ - write_zsreg(info->zs_channel, 9, - (info->zs_channel == info->zs_chan_a? CHRA: CHRB)); - udelay(10); - write_zsreg(info->zs_channel, 9, 0); - - /* - * Clear the receive FIFO. - */ - ZS_CLEARFIFO(info->zs_channel); - info->xmit_fifo_size = 1; - - /* - * Reset DMAs - */ - if (info->has_dma) - dma_init(info); - - /* - * Clear the interrupt registers. - */ - write_zsreg(info->zs_channel, 0, ERR_RES); - write_zsreg(info->zs_channel, 0, RES_H_IUS); - - /* - * Turn on RTS and DTR. - */ - if (!info->is_irda) - zs_rtsdtr(info, 1); - - /* - * Finally, enable sequencing and interrupts - */ - if (!info->dma_initted) { - /* interrupt on ext/status changes, all received chars, - transmit ready */ - info->curregs[1] = (info->curregs[1] & ~0x18) - | (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB); - } else { - /* interrupt on ext/status changes, W/Req pin is - receive DMA request */ - info->curregs[1] = (info->curregs[1] & ~(0x18 | TxINT_ENAB)) - | (EXT_INT_ENAB | WT_RDY_RT | WT_FN_RDYFN); - write_zsreg(info->zs_channel, 1, info->curregs[1]); - /* enable W/Req pin */ - info->curregs[1] |= WT_RDY_ENAB; - write_zsreg(info->zs_channel, 1, info->curregs[1]); - /* enable interrupts on transmit ready and receive errors */ - info->curregs[1] |= INT_ERR_Rx | TxINT_ENAB; - } - info->pendregs[1] = info->curregs[1]; - info->curregs[3] |= (RxENABLE | Rx8); - info->pendregs[3] = info->curregs[3]; - info->curregs[5] |= (TxENAB | Tx8); - info->pendregs[5] = info->curregs[5]; - info->curregs[9] |= (NV | MIE); - info->pendregs[9] = info->curregs[9]; - write_zsreg(info->zs_channel, 3, info->curregs[3]); - write_zsreg(info->zs_channel, 5, info->curregs[5]); - write_zsreg(info->zs_channel, 9, info->curregs[9]); - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Set the speed of the serial port - */ - change_speed(info, 0); - - /* Save the current value of RR0 */ - info->read_reg_zero = read_zsreg(info->zs_channel, 0); - - if (info->dma_initted) { - spin_lock_irqsave(&info->rx_dma_lock, flags); - rxdma_start(info, 0); - info->poll_dma_timer.expires = RX_DMA_TIMER; - add_timer(&info->poll_dma_timer); - spin_unlock_irqrestore(&info->rx_dma_lock, flags); - } - - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct mac_serial * info) -{ - OPNDBG("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); - - if (!(info->flags & ZILOG_INITIALIZED)) { - OPNDBG("(already shutdown)\n"); - return; - } - - if (info->has_dma) { - del_timer(&info->poll_dma_timer); - dbdma_reset(info->tx_dma); - dbdma_reset(&info->rx->dma); - disable_irq(info->tx_dma_irq); - disable_irq(info->rx_dma_irq); - } - disable_irq(info->irq); - - info->pendregs[1] = info->curregs[1] = 0; - write_zsreg(info->zs_channel, 1, 0); /* no interrupts */ - - info->curregs[3] &= ~RxENABLE; - info->pendregs[3] = info->curregs[3]; - write_zsreg(info->zs_channel, 3, info->curregs[3]); - - info->curregs[5] &= ~TxENAB; - if (!info->tty || C_HUPCL(info->tty)) - info->curregs[5] &= ~DTR; - info->pendregs[5] = info->curregs[5]; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - set_scc_power(info, 0); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = 0; - } - - if (info->has_dma && info->dma_priv) { - kfree(info->dma_priv); - info->dma_priv = NULL; - info->dma_initted = 0; - } - - memset(info->curregs, 0, sizeof(info->curregs)); - memset(info->pendregs, 0, sizeof(info->pendregs)); - - info->flags &= ~ZILOG_INITIALIZED; -} - -/* - * Turn power on or off to the SCC and associated stuff - * (port drivers, modem, IR port, etc.) - * Returns the number of milliseconds we should wait before - * trying to use the port. - */ -static int set_scc_power(struct mac_serial * info, int state) -{ - int delay = 0; - - if (state) { - PWRDBG("ttyS%d: powering up hardware\n", info->line); - pmac_call_feature( - PMAC_FTR_SCC_ENABLE, - info->dev_node, info->port_type, 1); - if (info->is_internal_modem) { - pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, - info->dev_node, 0, 1); - delay = 2500; /* wait for 2.5s before using */ - } else if (info->is_irda) - mdelay(50); /* Do better here once the problems - * with blocking have been ironed out - */ - } else { - /* TODO: Make that depend on a timer, don't power down - * immediately - */ - PWRDBG("ttyS%d: shutting down hardware\n", info->line); - if (info->is_internal_modem) { - PWRDBG("ttyS%d: shutting down modem\n", info->line); - pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, - info->dev_node, 0, 0); - } - pmac_call_feature( - PMAC_FTR_SCC_ENABLE, - info->dev_node, info->port_type, 0); - } - return delay; -} - -static void irda_rts_pulses(struct mac_serial *info, int w) -{ - udelay(w); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB); - udelay(2); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); - udelay(8); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB); - udelay(4); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); -} - -/* - * Set the irda codec on the imac to the specified baud rate. - */ -static void irda_setup(struct mac_serial *info) -{ - int code, speed, t; - - speed = info->tty->termios->c_cflag & CBAUD; - if (speed < B2400 || speed > B115200) - return; - code = 0x4d + B115200 - speed; - - /* disable serial interrupts and receive DMA */ - write_zsreg(info->zs_channel, 1, info->curregs[1] & ~0x9f); - - /* wait for transmitter to drain */ - t = 10000; - while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0 - || (read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) { - if (--t <= 0) { - printk(KERN_ERR "transmitter didn't drain\n"); - return; - } - udelay(10); - } - udelay(100); - - /* set to 8 bits, no parity, 19200 baud, RTS on, DTR off */ - write_zsreg(info->zs_channel, 4, X16CLK | SB1); - write_zsreg(info->zs_channel, 11, TCBR | RCBR); - t = BPS_TO_BRG(19200, ZS_CLOCK/16); - write_zsreg(info->zs_channel, 12, t); - write_zsreg(info->zs_channel, 13, t >> 8); - write_zsreg(info->zs_channel, 14, BRENABL); - write_zsreg(info->zs_channel, 3, Rx8 | RxENABLE); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); - - /* set TxD low for ~104us and pulse RTS */ - udelay(1000); - write_zsdata(info->zs_channel, 0xfe); - irda_rts_pulses(info, 150); - irda_rts_pulses(info, 180); - irda_rts_pulses(info, 50); - udelay(100); - - /* assert DTR, wait 30ms, talk to the chip */ - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS | DTR); - mdelay(30); - while (read_zsreg(info->zs_channel, 0) & Rx_CH_AV) - read_zsdata(info->zs_channel); - - write_zsdata(info->zs_channel, 1); - t = 1000; - while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - printk(KERN_ERR "irda_setup timed out on 1st byte\n"); - goto out; - } - udelay(10); - } - t = read_zsdata(info->zs_channel); - if (t != 4) - printk(KERN_ERR "irda_setup 1st byte = %x\n", t); - - write_zsdata(info->zs_channel, code); - t = 1000; - while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - printk(KERN_ERR "irda_setup timed out on 2nd byte\n"); - goto out; - } - udelay(10); - } - t = read_zsdata(info->zs_channel); - if (t != code) - printk(KERN_ERR "irda_setup 2nd byte = %x (%x)\n", t, code); - - /* Drop DTR again and do some more RTS pulses */ - out: - udelay(100); - write_zsreg(info->zs_channel, 5, Tx8 | TxENAB | RTS); - irda_rts_pulses(info, 80); - - /* We should be right to go now. We assume that load_zsregs - will get called soon to load up the correct baud rate etc. */ - info->curregs[5] = (info->curregs[5] | RTS) & ~DTR; - info->pendregs[5] = info->curregs[5]; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(struct mac_serial *info, struct termios *old_termios) -{ - unsigned cflag; - int bits; - int brg, baud; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return; - - cflag = info->tty->termios->c_cflag; - baud = tty_get_baud_rate(info->tty); - if (baud == 0) { - if (old_termios) { - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); - cflag = info->tty->termios->c_cflag; - baud = tty_get_baud_rate(info->tty); - } - else - baud = info->zs_baud; - } - if (baud > 230400) - baud = 230400; - else if (baud == 0) - baud = 38400; - - spin_lock_irqsave(&info->lock, flags); - info->zs_baud = baud; - info->clk_divisor = 16; - - BAUDBG(KERN_DEBUG "set speed to %d bds, ", baud); - - switch (baud) { - case ZS_CLOCK/16: /* 230400 */ - info->curregs[4] = X16CLK; - info->curregs[11] = 0; - break; - case ZS_CLOCK/32: /* 115200 */ - info->curregs[4] = X32CLK; - info->curregs[11] = 0; - break; - default: - info->curregs[4] = X16CLK; - info->curregs[11] = TCBR | RCBR; - brg = BPS_TO_BRG(baud, ZS_CLOCK/info->clk_divisor); - info->curregs[12] = (brg & 255); - info->curregs[13] = ((brg >> 8) & 255); - info->curregs[14] = BRENABL; - } - - /* byte size and parity */ - info->curregs[3] &= ~RxNBITS_MASK; - info->curregs[5] &= ~TxNBITS_MASK; - switch (cflag & CSIZE) { - case CS5: - info->curregs[3] |= Rx5; - info->curregs[5] |= Tx5; - BAUDBG("5 bits, "); - bits = 7; - break; - case CS6: - info->curregs[3] |= Rx6; - info->curregs[5] |= Tx6; - BAUDBG("6 bits, "); - bits = 8; - break; - case CS7: - info->curregs[3] |= Rx7; - info->curregs[5] |= Tx7; - BAUDBG("7 bits, "); - bits = 9; - break; - case CS8: - default: /* defaults to 8 bits */ - info->curregs[3] |= Rx8; - info->curregs[5] |= Tx8; - BAUDBG("8 bits, "); - bits = 10; - break; - } - info->pendregs[3] = info->curregs[3]; - info->pendregs[5] = info->curregs[5]; - - info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN); - if (cflag & CSTOPB) { - info->curregs[4] |= SB2; - bits++; - BAUDBG("2 stop, "); - } else { - info->curregs[4] |= SB1; - BAUDBG("1 stop, "); - } - if (cflag & PARENB) { - bits++; - info->curregs[4] |= PAR_ENA; - BAUDBG("parity, "); - } - if (!(cflag & PARODD)) { - info->curregs[4] |= PAR_EVEN; - } - info->pendregs[4] = info->curregs[4]; - - if (!(cflag & CLOCAL)) { - if (!(info->curregs[15] & DCDIE)) - info->read_reg_zero = read_zsreg(info->zs_channel, 0); - info->curregs[15] |= DCDIE; - } else - info->curregs[15] &= ~DCDIE; - if (cflag & CRTSCTS) { - info->curregs[15] |= CTSIE; - if ((read_zsreg(info->zs_channel, 0) & CTS) != 0) - info->tx_stopped = 1; - } else { - info->curregs[15] &= ~CTSIE; - info->tx_stopped = 0; - } - info->pendregs[15] = info->curregs[15]; - - /* Calc timeout value. This is pretty broken with high baud rates with HZ=100. - This code would love a larger HZ and a >1 fifo size, but this is not - a priority. The resulting value must be >HZ/2 - */ - info->timeout = ((info->xmit_fifo_size*HZ*bits) / baud); - info->timeout += HZ/50+1; /* Add .02 seconds of slop */ - - BAUDBG("timeout=%d/%ds, base:%d\n", (int)info->timeout, (int)HZ, - (int)info->baud_base); - - /* set the irda codec to the right rate */ - if (info->is_irda) - irda_setup(info); - - /* Load up the new values */ - load_zsregs(info->zs_channel, info->curregs); - - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (!(info->xmit_cnt <= 0 || tty->stopped || info->tx_stopped || - !info->xmit_buf)) - /* Enable transmitter */ - transmit_chars(info); - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty || !info->xmit_buf || !tmp_buf) - return 0; - - while (1) { - spin_lock_irqsave(&info->lock, flags); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - spin_unlock_irqrestore(&info->lock, flags); - break; - } - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = ((info->xmit_head + c) & - (SERIAL_XMIT_SIZE-1)); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->lock, flags); - buf += c; - count -= c; - ret += c; - } - spin_lock_irqsave(&info->lock, flags); - if (info->xmit_cnt && !tty->stopped && !info->tx_stopped - && !info->tx_active) - transmit_chars(info); - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - spin_lock_irqsave(&info->lock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->lock, flags); - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct * tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - printk(KERN_DEBUG "throttle %ld....\n",tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) { - spin_lock_irqsave(&info->lock, flags); - info->x_char = STOP_CHAR(tty); - if (!info->tx_active) - transmit_chars(info); - spin_unlock_irqrestore(&info->lock, flags); - } - - if (C_CRTSCTS(tty)) { - /* - * Here we want to turn off the RTS line. On Macintoshes, - * the external serial ports using a DIN-8 or DIN-9 - * connector only have the DTR line (which is usually - * wired to both RTS and DTR on an external modem in - * the cable). RTS doesn't go out to the serial port - * socket, it acts as an output enable for the transmit - * data line. So in this case we don't drop RTS. - * - * Macs with internal modems generally do have both RTS - * and DTR wired to the modem, so in that case we do - * drop RTS. - */ - if (info->is_internal_modem) { - spin_lock_irqsave(&info->lock, flags); - info->curregs[5] &= ~RTS; - info->pendregs[5] &= ~RTS; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); - } - } - -#ifdef CDTRCTS - if (tty->termios->c_cflag & CDTRCTS) { - spin_lock_irqsave(&info->lock, flags); - info->curregs[5] &= ~DTR; - info->pendregs[5] &= ~DTR; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); - } -#endif /* CDTRCTS */ -} - -static void rs_unthrottle(struct tty_struct * tty) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - printk(KERN_DEBUG "unthrottle %s: %d....\n", - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - spin_lock_irqsave(&info->lock, flags); - if (info->x_char) - info->x_char = 0; - else { - info->x_char = START_CHAR(tty); - if (!info->tx_active) - transmit_chars(info); - } - spin_unlock_irqrestore(&info->lock, flags); - } - - if (C_CRTSCTS(tty) && info->is_internal_modem) { - /* Assert RTS line */ - spin_lock_irqsave(&info->lock, flags); - info->curregs[5] |= RTS; - info->pendregs[5] |= RTS; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); - } - -#ifdef CDTRCTS - if (tty->termios->c_cflag & CDTRCTS) { - /* Assert DTR line */ - spin_lock_irqsave(&info->lock, flags); - info->curregs[5] |= DTR; - info->pendregs[5] |= DTR; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); - } -#endif -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct mac_serial * info, - struct serial_struct __user * retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->port; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int set_serial_info(struct mac_serial * info, - struct serial_struct __user * new_info) -{ - struct serial_struct new_serial; - struct mac_serial old_info; - int retval = 0; - - if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ZILOG_USR_MASK) != - (info->flags & ~ZILOG_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ZILOG_USR_MASK) | - (new_serial.flags & ZILOG_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~ZILOG_FLAGS) | - (new_serial.flags & ZILOG_FLAGS)); - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - -check_and_exit: - if (info->flags & ZILOG_INITIALIZED) - retval = setup_scc(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct mac_serial * info, unsigned int *value) -{ - unsigned char status; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - status = read_zsreg(info->zs_channel, 0); - spin_unlock_irqrestore(&info->lock, flags); - status = (status & Tx_BUF_EMP)? TIOCSER_TEMT: 0; - return put_user(status,value); -} - -static int rs_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct mac_serial * info = (struct mac_serial *)tty->driver_data; - unsigned char control, status; - unsigned long flags; - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) - return -ENODEV; -#endif - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - control = info->curregs[5]; - status = read_zsreg(info->zs_channel, 0); - spin_unlock_irqrestore(&info->lock, flags); - return ((control & RTS) ? TIOCM_RTS: 0) - | ((control & DTR) ? TIOCM_DTR: 0) - | ((status & DCD) ? TIOCM_CAR: 0) - | ((status & CTS) ? 0: TIOCM_CTS); -} - -static int rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct mac_serial * info = (struct mac_serial *)tty->driver_data; - unsigned int arg, bits; - unsigned long flags; - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) - return -ENODEV; -#endif - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - if (set & TIOCM_RTS) - info->curregs[5] |= RTS; - if (set & TIOCM_DTR) - info->curregs[5] |= DTR; - if (clear & TIOCM_RTS) - info->curregs[5] &= ~RTS; - if (clear & TIOCM_DTR) - info->curregs[5] &= ~DTR; - - info->pendregs[5] = info->curregs[5]; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* - * rs_break - turn transmit break condition on/off - */ -static void rs_break(struct tty_struct *tty, int break_state) -{ - struct mac_serial *info = (struct mac_serial *) tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_break")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (break_state == -1) - info->curregs[5] |= SND_BRK; - else - info->curregs[5] &= ~SND_BRK; - write_zsreg(info->zs_channel, 5, info->curregs[5]); - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - struct mac_serial * info = (struct mac_serial *)tty->driver_data; - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) - return -ENODEV; -#endif - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct __user *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct __user *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - - case TIOCSERGSTRUCT: - if (copy_to_user((struct mac_serial __user *) arg, - info, sizeof(struct mac_serial))) - return -EFAULT; - return 0; - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) -{ - struct mac_serial *info = (struct mac_serial *)tty->driver_data; - int was_stopped; - - if (tty->termios->c_cflag == old_termios->c_cflag) - return; - was_stopped = info->tx_stopped; - - change_speed(info, old_termios); - - if (was_stopped && !info->tx_stopped) { - tty->hw_stopped = 0; - rs_start(tty); - } -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. - * Wait for the last remaining data to be sent. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file * filp) -{ - struct mac_serial * info = (struct mac_serial *)tty->driver_data; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - spin_lock_irqsave(&info->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->lock, flags); - return; - } - - OPNDBG("rs_close ttyS%d, count = %d\n", info->line, info->count); - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "rs_close: bad serial port count; tty->count " - "is 1, info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_ERR "rs_close: bad serial port count for " - "ttyS%d: %d\n", info->line, info->count); - info->count = 0; - } - if (info->count) { - spin_unlock_irqrestore(&info->lock, flags); - return; - } - info->flags |= ZILOG_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - OPNDBG("waiting end of Tx... (timeout:%d)\n", info->closing_wait); - tty->closing = 1; - if (info->closing_wait != ZILOG_CLOSING_WAIT_NONE) { - spin_unlock_irqrestore(&info->lock, flags); - tty_wait_until_sent(tty, info->closing_wait); - spin_lock_irqsave(&info->lock, flags); - } - - /* - * At this point we stop accepting input. To do this, we - * disable the receiver and receive interrupts. - */ - info->curregs[3] &= ~RxENABLE; - info->pendregs[3] = info->curregs[3]; - write_zsreg(info->zs_channel, 3, info->curregs[3]); - info->curregs[1] &= ~(0x18); /* disable any rx ints */ - info->pendregs[1] = info->curregs[1]; - write_zsreg(info->zs_channel, 1, info->curregs[1]); - ZS_CLEARFIFO(info->zs_channel); - if (info->flags & ZILOG_INITIALIZED) { - /* - * Before we drop DTR, make sure the SCC transmitter - * has completely drained. - */ - OPNDBG("waiting end of Rx...\n"); - spin_unlock_irqrestore(&info->lock, flags); - rs_wait_until_sent(tty, info->timeout); - spin_lock_irqsave(&info->lock, flags); - } - - shutdown(info); - /* restore flags now since shutdown() will have disabled this port's - specific irqs */ - spin_unlock_irqrestore(&info->lock, flags); - - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->tty = 0; - - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING); - wake_up_interruptible(&info->close_wait); -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mac_serial *info = (struct mac_serial *) tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - -/* printk("rs_wait_until_sent, timeout:%d, tty_stopped:%d, tx_stopped:%d\n", - timeout, tty->stopped, info->tx_stopped); -*/ - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - */ - if (info->timeout <= HZ/50) { - printk(KERN_INFO "macserial: invalid info->timeout=%d\n", - info->timeout); - info->timeout = HZ/50+1; - } - - char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; - char_time = char_time / 5; - if (char_time > HZ) { - printk(KERN_WARNING "macserial: char_time %ld >HZ !!!\n", - char_time); - char_time = 1; - } else if (char_time == 0) - char_time = 1; - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - while ((read_zsreg(info->zs_channel, 1) & ALL_SNT) == 0) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - current->state = TASK_RUNNING; -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rs_hangup(struct tty_struct *tty) -{ - struct mac_serial * info = (struct mac_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ZILOG_NORMAL_ACTIVE; - info->tty = 0; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct mac_serial *info) -{ - DECLARE_WAITQUEUE(wait,current); - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & ZILOG_CLOSING) { - interruptible_sleep_on(&info->close_wait); - return -EAGAIN; - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ZILOG_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); - OPNDBG("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->count); - spin_lock_irq(&info->lock); - if (!tty_hung_up_p(filp)) - info->count--; - spin_unlock_irq(&info->lock); - info->blocked_open++; - while (1) { - spin_lock_irq(&info->lock); - if ((tty->termios->c_cflag & CBAUD) && - !info->is_irda) - zs_rtsdtr(info, 1); - spin_unlock_irq(&info->lock); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ZILOG_INITIALIZED)) { - retval = -EAGAIN; - break; - } - if (!(info->flags & ZILOG_CLOSING) && - (do_clocal || (read_zsreg(info->zs_channel, 0) & DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - OPNDBG("block_til_ready blocking: ttyS%d, count = %d\n", - info->line, info->count); - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - OPNDBG("block_til_ready after blocking: ttyS%d, count = %d\n", - info->line, info->count); - if (retval) - return retval; - info->flags |= ZILOG_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its ZILOG structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_open(struct tty_struct *tty, struct file * filp) -{ - struct mac_serial *info; - int retval, line; - unsigned long page; - - line = tty->index; - if ((line < 0) || (line >= zs_channels_found)) { - return -ENODEV; - } - info = zs_soft + line; - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) { - return -ENODEV; - } -#endif - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - OPNDBG("rs_open %s, count = %d, tty=%p\n", tty->name, - info->count, tty); - - info->count++; - tty->driver_data = info; - info->tty = tty; - - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - } - - /* - * If the port is the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || - (info->flags & ZILOG_CLOSING)) { - if (info->flags & ZILOG_CLOSING) - interruptible_sleep_on(&info->close_wait); - return -EAGAIN; - } - - /* - * Start up serial port - */ - - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { - OPNDBG("rs_open returning after block_til_ready with %d\n", - retval); - return retval; - } - -#ifdef CONFIG_SERIAL_CONSOLE - if (sercons.cflag && sercons.index == line) { - tty->termios->c_cflag = sercons.cflag; - sercons.cflag = 0; - change_speed(info, 0); - } -#endif - - OPNDBG("rs_open %s successful...\n", tty->name); - return 0; -} - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk(KERN_INFO "PowerMac Z8530 serial driver version " MACSERIAL_VERSION "\n"); -} - -/* - * Initialize one channel, both the mac_serial and mac_zschannel - * structs. We use the dev_node field of the mac_serial struct. - */ -static int -chan_init(struct mac_serial *zss, struct mac_zschannel *zs_chan, - struct mac_zschannel *zs_chan_a) -{ - struct device_node *ch = zss->dev_node; - char *conn; - int len; - struct slot_names_prop { - int count; - char name[1]; - } *slots; - - zss->irq = ch->intrs[0].line; - zss->has_dma = 0; -#if !defined(CONFIG_KGDB) && defined(SUPPORT_SERIAL_DMA) - if (ch->n_addrs >= 3 && ch->n_intrs == 3) - zss->has_dma = 1; -#endif - zss->dma_initted = 0; - - zs_chan->control = (volatile unsigned char *) - ioremap(ch->addrs[0].address, 0x1000); - zs_chan->data = zs_chan->control + 0x10; - spin_lock_init(&zs_chan->lock); - zs_chan->parent = zss; - zss->zs_channel = zs_chan; - zss->zs_chan_a = zs_chan_a; - - /* setup misc varariables */ - zss->kgdb_channel = 0; - - /* For now, we assume you either have a slot-names property - * with "Modem" in it, or your channel is compatible with - * "cobalt". Might need additional fixups - */ - zss->is_internal_modem = device_is_compatible(ch, "cobalt"); - conn = get_property(ch, "AAPL,connector", &len); - zss->is_irda = conn && (strcmp(conn, "infrared") == 0); - zss->port_type = PMAC_SCC_ASYNC; - /* 1999 Powerbook G3 has slot-names property instead */ - slots = (struct slot_names_prop *)get_property(ch, "slot-names", &len); - if (slots && slots->count > 0) { - if (strcmp(slots->name, "IrDA") == 0) - zss->is_irda = 1; - else if (strcmp(slots->name, "Modem") == 0) - zss->is_internal_modem = 1; - } - if (zss->is_irda) - zss->port_type = PMAC_SCC_IRDA; - if (zss->is_internal_modem) { - struct device_node* i2c_modem = find_devices("i2c-modem"); - if (i2c_modem) { - char* mid = get_property(i2c_modem, "modem-id", NULL); - if (mid) switch(*mid) { - case 0x04 : - case 0x05 : - case 0x07 : - case 0x08 : - case 0x0b : - case 0x0c : - zss->port_type = PMAC_SCC_I2S1; - } - printk(KERN_INFO "macserial: i2c-modem detected, id: %d\n", - mid ? (*mid) : 0); - } else { - printk(KERN_INFO "macserial: serial modem detected\n"); - } - } - - while (zss->has_dma) { - zss->dma_priv = NULL; - /* it seems that the last two addresses are the - DMA controllers */ - zss->tx_dma = (volatile struct dbdma_regs *) - ioremap(ch->addrs[ch->n_addrs - 2].address, 0x100); - zss->rx = (volatile struct mac_dma *) - ioremap(ch->addrs[ch->n_addrs - 1].address, 0x100); - zss->tx_dma_irq = ch->intrs[1].line; - zss->rx_dma_irq = ch->intrs[2].line; - spin_lock_init(&zss->rx_dma_lock); - break; - } - - init_timer(&zss->powerup_timer); - zss->powerup_timer.function = powerup_done; - zss->powerup_timer.data = (unsigned long) zss; - return 0; -} - -/* - * /proc fs routines. TODO: Add status lines & error stats - */ -static inline int -line_info(char *buf, struct mac_serial *info) -{ - int ret=0; - unsigned char* connector; - int lenp; - - ret += sprintf(buf, "%d: port:0x%X irq:%d", info->line, info->port, info->irq); - - connector = get_property(info->dev_node, "AAPL,connector", &lenp); - if (connector) - ret+=sprintf(buf+ret," con:%s ", connector); - if (info->is_internal_modem) { - if (!connector) - ret+=sprintf(buf+ret," con:"); - ret+=sprintf(buf+ret,"%s", " (internal modem)"); - } - if (info->is_irda) { - if (!connector) - ret+=sprintf(buf+ret," con:"); - ret+=sprintf(buf+ret,"%s", " (IrDA)"); - } - ret+=sprintf(buf+ret,"\n"); - - return ret; -} - -int macserial_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - int l, len = 0; - off_t begin = 0; - struct mac_serial *info; - - len += sprintf(page, "serinfo:1.0 driver:" MACSERIAL_VERSION "\n"); - for (info = zs_chain; info && len < 4000; info = info->zs_next) { - l = line_info(page + len, info); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } - } - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); -} - -/* Ask the PROM how many Z8530s we have and initialize their zs_channels */ -static void -probe_sccs(void) -{ - struct device_node *dev, *ch; - struct mac_serial **pp; - int n, chip, nchan; - struct mac_zschannel *zs_chan; - int chan_a_index; - - n = 0; - pp = &zs_chain; - zs_chan = zs_channels; - for (dev = find_devices("escc"); dev != 0; dev = dev->next) { - nchan = 0; - chip = n; - if (n >= NUM_CHANNELS) { - printk(KERN_WARNING "Sorry, can't use %s: no more " - "channels\n", dev->full_name); - continue; - } - chan_a_index = 0; - for (ch = dev->child; ch != 0; ch = ch->sibling) { - if (nchan >= 2) { - printk(KERN_WARNING "SCC: Only 2 channels per " - "chip are supported\n"); - break; - } - if (ch->n_addrs < 1 || (ch ->n_intrs < 1)) { - printk("Can't use %s: %d addrs %d intrs\n", - ch->full_name, ch->n_addrs, ch->n_intrs); - continue; - } - - /* The channel with the higher address - will be the A side. */ - if (nchan > 0 && - ch->addrs[0].address - > zs_soft[n-1].dev_node->addrs[0].address) - chan_a_index = 1; - - /* minimal initialization for now */ - zs_soft[n].dev_node = ch; - *pp = &zs_soft[n]; - pp = &zs_soft[n].zs_next; - ++nchan; - ++n; - } - if (nchan == 0) - continue; - - /* set up A side */ - if (chan_init(&zs_soft[chip + chan_a_index], zs_chan, zs_chan)) - continue; - ++zs_chan; - - /* set up B side, if it exists */ - if (nchan > 1) - if (chan_init(&zs_soft[chip + 1 - chan_a_index], - zs_chan, zs_chan - 1)) - continue; - ++zs_chan; - } - *pp = 0; - - zs_channels_found = n; -#ifdef CONFIG_PMAC_PBOOK - if (n) - pmu_register_sleep_notifier(&serial_sleep_notifier); -#endif /* CONFIG_PMAC_PBOOK */ -} - -static struct tty_operations serial_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .break_ctl = rs_break, - .wait_until_sent = rs_wait_until_sent, - .read_proc = macserial_read_proc, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, -}; - -static int macserial_init(void) -{ - int channel, i; - struct mac_serial *info; - - /* Find out how many Z8530 SCCs we have */ - if (zs_chain == 0) - probe_sccs(); - - serial_driver = alloc_tty_driver(zs_channels_found); - if (!serial_driver) - return -ENOMEM; - - /* XXX assume it's a powerbook if we have a via-pmu - * - * This is OK for core99 machines as well. - */ - is_powerbook = find_devices("via-pmu") != 0; - - /* Register the interrupt handler for each one - * We also request the OF resources here as probe_sccs() - * might be called too early for that - */ - for (i = 0; i < zs_channels_found; ++i) { - struct device_node* ch = zs_soft[i].dev_node; - if (!request_OF_resource(ch, 0, NULL)) { - printk(KERN_ERR "macserial: can't request IO resource !\n"); - put_tty_driver(serial_driver); - return -ENODEV; - } - if (zs_soft[i].has_dma) { - if (!request_OF_resource(ch, ch->n_addrs - 2, " (tx dma)")) { - printk(KERN_ERR "macserial: can't request TX DMA resource !\n"); - zs_soft[i].has_dma = 0; - goto no_dma; - } - if (!request_OF_resource(ch, ch->n_addrs - 1, " (rx dma)")) { - release_OF_resource(ch, ch->n_addrs - 2); - printk(KERN_ERR "macserial: can't request RX DMA resource !\n"); - zs_soft[i].has_dma = 0; - goto no_dma; - } - if (request_irq(zs_soft[i].tx_dma_irq, rs_txdma_irq, 0, - "SCC-txdma", &zs_soft[i])) - printk(KERN_ERR "macserial: can't get irq %d\n", - zs_soft[i].tx_dma_irq); - disable_irq(zs_soft[i].tx_dma_irq); - if (request_irq(zs_soft[i].rx_dma_irq, rs_rxdma_irq, 0, - "SCC-rxdma", &zs_soft[i])) - printk(KERN_ERR "macserial: can't get irq %d\n", - zs_soft[i].rx_dma_irq); - disable_irq(zs_soft[i].rx_dma_irq); - } -no_dma: - if (request_irq(zs_soft[i].irq, rs_interrupt, 0, - "SCC", &zs_soft[i])) - printk(KERN_ERR "macserial: can't get irq %d\n", - zs_soft[i].irq); - disable_irq(zs_soft[i].irq); - } - - show_serial_version(); - - /* Initialize the tty_driver structure */ - /* Not all of this is exactly right for us. */ - - serial_driver->owner = THIS_MODULE; - serial_driver->driver_name = "macserial"; - serial_driver->devfs_name = "tts/"; - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B38400 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &serial_ops); - - if (tty_register_driver(serial_driver)) - printk(KERN_ERR "Error: couldn't register serial driver\n"); - - for (channel = 0; channel < zs_channels_found; ++channel) { -#ifdef CONFIG_KGDB - if (zs_soft[channel].kgdb_channel) { - kgdb_interruptible(1); - continue; - } -#endif - zs_soft[channel].clk_divisor = 16; -/* -- we are not sure the SCC is powered ON at this point - zs_soft[channel].zs_baud = get_zsbaud(&zs_soft[channel]); -*/ - zs_soft[channel].zs_baud = 38400; - - /* If console serial line, then enable interrupts. */ - if (zs_soft[channel].is_cons) { - printk(KERN_INFO "macserial: console line, enabling " - "interrupt %d\n", zs_soft[channel].irq); - panic("macserial: console not supported yet !"); - write_zsreg(zs_soft[channel].zs_channel, R1, - (EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB)); - write_zsreg(zs_soft[channel].zs_channel, R9, - (NV | MIE)); - } - } - - for (info = zs_chain, i = 0; info; info = info->zs_next, i++) - { - unsigned char* connector; - int lenp; - -#ifdef CONFIG_KGDB - if (info->kgdb_channel) { - continue; - } -#endif - info->magic = SERIAL_MAGIC; - info->port = (int) info->zs_channel->control; - info->line = i; - info->tty = 0; - info->custom_divisor = 16; - info->timeout = 0; - info->close_delay = 50; - info->closing_wait = 3000; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - INIT_WORK(&info->tqueue, do_softint, info); - spin_lock_init(&info->lock); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->timeout = HZ; - printk(KERN_INFO "tty%02d at 0x%08x (irq = %d)", info->line, - info->port, info->irq); - printk(" is a Z8530 ESCC"); - connector = get_property(info->dev_node, "AAPL,connector", &lenp); - if (connector) - printk(", port = %s", connector); - if (info->is_internal_modem) - printk(" (internal modem)"); - if (info->is_irda) - printk(" (IrDA)"); - printk("\n"); - } - tmp_buf = 0; - - return 0; -} - -void macserial_cleanup(void) -{ - int i; - unsigned long flags; - struct mac_serial *info; - - for (info = zs_chain, i = 0; info; info = info->zs_next, i++) - set_scc_power(info, 0); - spin_lock_irqsave(&info->lock, flags); - for (i = 0; i < zs_channels_found; ++i) { - free_irq(zs_soft[i].irq, &zs_soft[i]); - if (zs_soft[i].has_dma) { - free_irq(zs_soft[i].tx_dma_irq, &zs_soft[i]); - free_irq(zs_soft[i].rx_dma_irq, &zs_soft[i]); - } - release_OF_resource(zs_soft[i].dev_node, 0); - if (zs_soft[i].has_dma) { - struct device_node* ch = zs_soft[i].dev_node; - release_OF_resource(ch, ch->n_addrs - 2); - release_OF_resource(ch, ch->n_addrs - 1); - } - } - spin_unlock_irqrestore(&info->lock, flags); - tty_unregister_driver(serial_driver); - put_tty_driver(serial_driver); - - if (tmp_buf) { - free_page((unsigned long) tmp_buf); - tmp_buf = 0; - } - -#ifdef CONFIG_PMAC_PBOOK - if (zs_channels_found) - pmu_unregister_sleep_notifier(&serial_sleep_notifier); -#endif /* CONFIG_PMAC_PBOOK */ -} - -module_init(macserial_init); -module_exit(macserial_cleanup); -MODULE_LICENSE("GPL"); - -#if 0 -/* - * register_serial and unregister_serial allows for serial ports to be - * configured at run-time, to support PCMCIA modems. - */ -/* PowerMac: Unused at this time, just here to make things link. */ -int register_serial(struct serial_struct *req) -{ - return -1; -} - -void unregister_serial(int line) -{ - return; -} -#endif - -/* - * ------------------------------------------------------------ - * Serial console driver - * ------------------------------------------------------------ - */ -#ifdef CONFIG_SERIAL_CONSOLE - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void serial_console_write(struct console *co, const char *s, - unsigned count) -{ - struct mac_serial *info = zs_soft + co->index; - int i; - - /* Turn of interrupts and enable the transmitter. */ - write_zsreg(info->zs_channel, R1, info->curregs[1] & ~TxINT_ENAB); - write_zsreg(info->zs_channel, R5, info->curregs[5] | TxENAB | RTS | DTR); - - for (i=0; i<count; i++) { - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) { - eieio(); - } - - write_zsdata(info->zs_channel, s[i]); - if (s[i] == 10) { - while ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) - == 0) - eieio(); - - write_zsdata(info->zs_channel, 13); - } - } - - /* Restore the values in the registers. */ - write_zsreg(info->zs_channel, R1, info->curregs[1]); - /* Don't disable the transmitter. */ -} - -static struct tty_driver *serial_driver; - -static struct tty_driver *serial_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - -/* - * Setup initial baud/bits/parity. We do two things here: - * - construct a cflag setting for the first rs_open() - * - initialize the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init serial_console_setup(struct console *co, char *options) -{ - struct mac_serial *info; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int cflag = CREAD | HUPCL | CLOCAL; - int brg; - char *s; - long flags; - - /* Find out how many Z8530 SCCs we have */ - if (zs_chain == 0) - probe_sccs(); - - if (zs_chain == 0) - return -1; - - /* Do we have the device asked for? */ - if (co->index >= zs_channels_found) - return -1; - info = zs_soft + co->index; - - set_scc_power(info, 1); - - /* Reset the channel */ - write_zsreg(info->zs_channel, R9, CHRA); - - if (options) { - baud = simple_strtoul(options, NULL, 10); - s = options; - while(*s >= '0' && *s <= '9') - s++; - if (*s) - parity = *s++; - if (*s) - bits = *s - '0'; - } - - /* - * Now construct a cflag setting. - */ - switch(baud) { - case 1200: - cflag |= B1200; - break; - case 2400: - cflag |= B2400; - break; - case 4800: - cflag |= B4800; - break; - case 9600: - cflag |= B9600; - break; - case 19200: - cflag |= B19200; - break; - case 57600: - cflag |= B57600; - break; - case 115200: - cflag |= B115200; - break; - case 38400: - default: - cflag |= B38400; - break; - } - switch(bits) { - case 7: - cflag |= CS7; - break; - default: - case 8: - cflag |= CS8; - break; - } - switch(parity) { - case 'o': case 'O': - cflag |= PARENB | PARODD; - break; - case 'e': case 'E': - cflag |= PARENB; - break; - } - co->cflag = cflag; - - spin_lock_irqsave(&info->lock, flags); - memset(info->curregs, 0, sizeof(info->curregs)); - - info->zs_baud = baud; - info->clk_divisor = 16; - switch (info->zs_baud) { - case ZS_CLOCK/16: /* 230400 */ - info->curregs[4] = X16CLK; - info->curregs[11] = 0; - break; - case ZS_CLOCK/32: /* 115200 */ - info->curregs[4] = X32CLK; - info->curregs[11] = 0; - break; - default: - info->curregs[4] = X16CLK; - info->curregs[11] = TCBR | RCBR; - brg = BPS_TO_BRG(info->zs_baud, ZS_CLOCK/info->clk_divisor); - info->curregs[12] = (brg & 255); - info->curregs[13] = ((brg >> 8) & 255); - info->curregs[14] = BRENABL; - } - - /* byte size and parity */ - info->curregs[3] &= ~RxNBITS_MASK; - info->curregs[5] &= ~TxNBITS_MASK; - switch (cflag & CSIZE) { - case CS5: - info->curregs[3] |= Rx5; - info->curregs[5] |= Tx5; - break; - case CS6: - info->curregs[3] |= Rx6; - info->curregs[5] |= Tx6; - break; - case CS7: - info->curregs[3] |= Rx7; - info->curregs[5] |= Tx7; - break; - case CS8: - default: /* defaults to 8 bits */ - info->curregs[3] |= Rx8; - info->curregs[5] |= Tx8; - break; - } - info->curregs[5] |= TxENAB | RTS | DTR; - info->pendregs[3] = info->curregs[3]; - info->pendregs[5] = info->curregs[5]; - - info->curregs[4] &= ~(SB_MASK | PAR_ENA | PAR_EVEN); - if (cflag & CSTOPB) { - info->curregs[4] |= SB2; - } else { - info->curregs[4] |= SB1; - } - if (cflag & PARENB) { - info->curregs[4] |= PAR_ENA; - if (!(cflag & PARODD)) { - info->curregs[4] |= PAR_EVEN; - } - } - info->pendregs[4] = info->curregs[4]; - - if (!(cflag & CLOCAL)) { - if (!(info->curregs[15] & DCDIE)) - info->read_reg_zero = read_zsreg(info->zs_channel, 0); - info->curregs[15] |= DCDIE; - } else - info->curregs[15] &= ~DCDIE; - if (cflag & CRTSCTS) { - info->curregs[15] |= CTSIE; - if ((read_zsreg(info->zs_channel, 0) & CTS) != 0) - info->tx_stopped = 1; - } else { - info->curregs[15] &= ~CTSIE; - info->tx_stopped = 0; - } - info->pendregs[15] = info->curregs[15]; - - /* Load up the new values */ - load_zsregs(info->zs_channel, info->curregs); - - spin_unlock_irqrestore(&info->lock, flags); - - return 0; -} - -static struct console sercons = { - .name = "ttyS", - .write = serial_console_write, - .device = serial_console_device, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Register console. - */ -static void __init mac_scc_console_init(void) -{ - register_console(&sercons); -} -console_initcall(mac_scc_console_init); - -#endif /* ifdef CONFIG_SERIAL_CONSOLE */ - -#ifdef CONFIG_KGDB -/* These are for receiving and sending characters under the kgdb - * source level kernel debugger. - */ -void putDebugChar(char kgdb_char) -{ - struct mac_zschannel *chan = zs_kgdbchan; - while ((read_zsreg(chan, 0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(chan, kgdb_char); -} - -char getDebugChar(void) -{ - struct mac_zschannel *chan = zs_kgdbchan; - while((read_zsreg(chan, 0) & Rx_CH_AV) == 0) - eieio(); /*barrier();*/ - return read_zsdata(chan); -} - -void kgdb_interruptible(int yes) -{ - struct mac_zschannel *chan = zs_kgdbchan; - int one, nine; - nine = read_zsreg(chan, 9); - if (yes == 1) { - one = EXT_INT_ENAB|INT_ALL_Rx; - nine |= MIE; - printk("turning serial ints on\n"); - } else { - one = RxINT_DISAB; - nine &= ~MIE; - printk("turning serial ints off\n"); - } - write_zsreg(chan, 1, one); - write_zsreg(chan, 9, nine); -} - -/* This sets up the serial port we're using, and turns on - * interrupts for that channel, so kgdb is usable once we're done. - */ -static inline void kgdb_chaninit(struct mac_zschannel *ms, int intson, int bps) -{ - int brg; - int i, x; - volatile char *sccc = ms->control; - brg = BPS_TO_BRG(bps, ZS_CLOCK/16); - printk("setting bps on kgdb line to %d [brg=%x]\n", bps, brg); - for (i = 20000; i != 0; --i) { - x = *sccc; eieio(); - } - for (i = 0; i < sizeof(scc_inittab); ++i) { - write_zsreg(ms, scc_inittab[i], scc_inittab[i+1]); - i++; - } -} - -/* This is called at boot time to prime the kgdb serial debugging - * serial line. The 'tty_num' argument is 0 for /dev/ttya and 1 - * for /dev/ttyb which is determined in setup_arch() from the - * boot command line flags. - * XXX at the moment probably only channel A will work - */ -void __init zs_kgdb_hook(int tty_num) -{ - /* Find out how many Z8530 SCCs we have */ - if (zs_chain == 0) - probe_sccs(); - - set_scc_power(&zs_soft[tty_num], 1); - - zs_kgdbchan = zs_soft[tty_num].zs_channel; - zs_soft[tty_num].change_needed = 0; - zs_soft[tty_num].clk_divisor = 16; - zs_soft[tty_num].zs_baud = 38400; - zs_soft[tty_num].kgdb_channel = 1; /* This runs kgdb */ - - /* Turn on transmitter/receiver at 8-bits/char */ - kgdb_chaninit(zs_soft[tty_num].zs_channel, 1, 38400); - printk("KGDB: on channel %d initialized\n", tty_num); - set_debug_traps(); /* init stub */ -} -#endif /* ifdef CONFIG_KGDB */ - -#ifdef CONFIG_PMAC_PBOOK -/* - * notify clients before sleep and reset bus afterwards - */ -int -serial_notify_sleep(struct pmu_sleep_notifier *self, int when) -{ - int i; - - switch (when) { - case PBOOK_SLEEP_REQUEST: - case PBOOK_SLEEP_REJECT: - break; - - case PBOOK_SLEEP_NOW: - for (i=0; i<zs_channels_found; i++) { - struct mac_serial *info = &zs_soft[i]; - if (info->flags & ZILOG_INITIALIZED) { - shutdown(info); - info->flags |= ZILOG_SLEEPING; - } - } - break; - case PBOOK_WAKE: - for (i=0; i<zs_channels_found; i++) { - struct mac_serial *info = &zs_soft[i]; - if (info->flags & ZILOG_SLEEPING) { - info->flags &= ~ZILOG_SLEEPING; - startup(info); - } - } - break; - } - return PBOOK_SLEEP_OK; -} -#endif /* CONFIG_PMAC_PBOOK */ |