diff options
Diffstat (limited to 'drivers/leds/leds-pca9532.c')
| -rw-r--r-- | drivers/leds/leds-pca9532.c | 337 |
1 files changed, 337 insertions, 0 deletions
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c new file mode 100644 index 000000000000..4064d4f6b33b --- /dev/null +++ b/drivers/leds/leds-pca9532.c @@ -0,0 +1,337 @@ +/* + * pca9532.c - 16-bit Led dimmer + * + * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf + * + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/mutex.h> +#include <linux/leds-pca9532.h> + +static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END}; +I2C_CLIENT_INSMOD_1(pca9532); + +#define PCA9532_REG_PSC(i) (0x2+(i)*2) +#define PCA9532_REG_PWM(i) (0x3+(i)*2) +#define PCA9532_REG_LS0 0x6 +#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0) +#define LED_NUM(led) (led & 0x3) + +#define ldev_to_led(c) container_of(c, struct pca9532_led, ldev) + +struct pca9532_data { + struct i2c_client *client; + struct pca9532_led leds[16]; + struct mutex update_lock; + struct input_dev *idev; + u8 pwm[2]; + u8 psc[2]; +}; + +static int pca9532_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int pca9532_remove(struct i2c_client *client); + +static const struct i2c_device_id pca9532_id[] = { + { "pca9532", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, pca9532_id); + +static struct i2c_driver pca9532_driver = { + .driver = { + .name = "pca9532", + }, + .probe = pca9532_probe, + .remove = pca9532_remove, + .id_table = pca9532_id, +}; + +/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly, + * the clever Thecus people are using one pwm to drive the beeper. So, + * as a compromise we average one pwm to the values requested by all + * leds that are not ON/OFF. + * */ +static int pca9532_setpwm(struct i2c_client *client, int pwm, int blink, + enum led_brightness value) +{ + int a = 0, b = 0, i = 0; + struct pca9532_data *data = i2c_get_clientdata(client); + for (i = 0; i < 16; i++) { + if (data->leds[i].type == PCA9532_TYPE_LED && + data->leds[i].state == PCA9532_PWM0+pwm) { + a++; + b += data->leds[i].ldev.brightness; + } + } + if (a == 0) { + dev_err(&client->dev, + "fear of division by zero %d/%d, wanted %d\n", + b, a, value); + return -EINVAL; + } + b = b/a; + if (b > 0xFF) + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm[pwm] = b; + i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), + data->pwm[pwm]); + data->psc[pwm] = blink; + i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), + data->psc[pwm]); + mutex_unlock(&data->update_lock); + return 0; +} + +/* Set LED routing */ +static void pca9532_setled(struct pca9532_led *led) +{ + struct i2c_client *client = led->client; + struct pca9532_data *data = i2c_get_clientdata(client); + char reg; + + mutex_lock(&data->update_lock); + reg = i2c_smbus_read_byte_data(client, LED_REG(led->id)); + /* zero led bits */ + reg = reg & ~(0x3<<LED_NUM(led->id)*2); + /* set the new value */ + reg = reg | (led->state << LED_NUM(led->id)*2); + i2c_smbus_write_byte_data(client, LED_REG(led->id), reg); + mutex_unlock(&data->update_lock); +} + +static void pca9532_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + int err = 0; + struct pca9532_led *led = ldev_to_led(led_cdev); + + if (value == LED_OFF) + led->state = PCA9532_OFF; + else if (value == LED_FULL) + led->state = PCA9532_ON; + else { + led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ + err = pca9532_setpwm(led->client, 0, 0, value); + if (err) + return; /* XXX: led api doesn't allow error code? */ + } + pca9532_setled(led); +} + +static int pca9532_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct pca9532_led *led = ldev_to_led(led_cdev); + struct i2c_client *client = led->client; + int psc; + + if (*delay_on == 0 && *delay_off == 0) { + /* led subsystem ask us for a blink rate */ + *delay_on = 1000; + *delay_off = 1000; + } + if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6) + return -EINVAL; + + /* Thecus specific: only use PSC/PWM 0 */ + psc = (*delay_on * 152-1)/1000; + return pca9532_setpwm(client, 0, psc, led_cdev->brightness); +} + +int pca9532_event(struct input_dev *dev, unsigned int type, unsigned int code, + int value) +{ + struct pca9532_data *data = input_get_drvdata(dev); + + if (type != EV_SND && (code != SND_BELL || code != SND_TONE)) + return -1; + + /* XXX: allow different kind of beeps with psc/pwm modifications */ + if (value > 1 && value < 32767) + data->pwm[1] = 127; + else + data->pwm[1] = 0; + + dev_info(&dev->dev, "setting beep to %d \n", data->pwm[1]); + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), + data->pwm[1]); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int pca9532_configure(struct i2c_client *client, + struct pca9532_data *data, struct pca9532_platform_data *pdata) +{ + int i, err = 0; + + for (i = 0; i < 2; i++) { + data->pwm[i] = pdata->pwm[i]; + data->psc[i] = pdata->psc[i]; + i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i), + data->pwm[i]); + i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i), + data->psc[i]); + } + + for (i = 0; i < 16; i++) { + struct pca9532_led *led = &data->leds[i]; + struct pca9532_led *pled = &pdata->leds[i]; + led->client = client; + led->id = i; + led->type = pled->type; + switch (led->type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led->state = pled->state; + led->name = pled->name; + led->ldev.name = led->name; + led->ldev.brightness = LED_OFF; + led->ldev.brightness_set = pca9532_set_brightness; + led->ldev.blink_set = pca9532_set_blink; + if (led_classdev_register(&client->dev, + &led->ldev) < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led->name); + goto exit; + } + pca9532_setled(led); + break; + case PCA9532_TYPE_N2100_BEEP: + BUG_ON(data->idev); + led->state = PCA9532_PWM1; + pca9532_setled(led); + data->idev = input_allocate_device(); + if (data->idev == NULL) { + err = -ENOMEM; + goto exit; + } + data->idev->name = pled->name; + data->idev->phys = "i2c/pca9532"; + data->idev->id.bustype = BUS_HOST; + data->idev->id.vendor = 0x001f; + data->idev->id.product = 0x0001; + data->idev->id.version = 0x0100; + data->idev->evbit[0] = BIT_MASK(EV_SND); + data->idev->sndbit[0] = BIT_MASK(SND_BELL) | + BIT_MASK(SND_TONE); + data->idev->event = pca9532_event; + input_set_drvdata(data->idev, data); + err = input_register_device(data->idev); + if (err) { + input_free_device(data->idev); + data->idev = NULL; + goto exit; + } + break; + } + } + return 0; + +exit: + if (i > 0) + for (i = i - 1; i >= 0; i--) + switch (data->leds[i].type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led_classdev_unregister(&data->leds[i].ldev); + break; + case PCA9532_TYPE_N2100_BEEP: + if (data->idev != NULL) { + input_unregister_device(data->idev); + input_free_device(data->idev); + data->idev = NULL; + } + break; + } + + return err; + +} + +static int pca9532_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca9532_data *data = i2c_get_clientdata(client); + struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct pca9532_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + dev_info(&client->dev, "setting platform data\n"); + i2c_set_clientdata(client, data); + data->client = client; + mutex_init(&data->update_lock); + + if (pca9532_pdata == NULL) + return -EIO; + + pca9532_configure(client, data, pca9532_pdata); + return 0; + +} + +static int pca9532_remove(struct i2c_client *client) +{ + struct pca9532_data *data = i2c_get_clientdata(client); + int i; + for (i = 0; i < 16; i++) + switch (data->leds[i].type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led_classdev_unregister(&data->leds[i].ldev); + break; + case PCA9532_TYPE_N2100_BEEP: + if (data->idev != NULL) { + input_unregister_device(data->idev); + input_free_device(data->idev); + data->idev = NULL; + } + break; + } + + kfree(data); + i2c_set_clientdata(client, NULL); + return 0; +} + +static int __init pca9532_init(void) +{ + return i2c_add_driver(&pca9532_driver); +} + +static void __exit pca9532_exit(void) +{ + i2c_del_driver(&pca9532_driver); +} + +MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCA 9532 LED dimmer"); + +module_init(pca9532_init); +module_exit(pca9532_exit); + |