diff options
Diffstat (limited to 'drivers/isdn/hisax/bkm_ax.h')
-rw-r--r-- | drivers/isdn/hisax/bkm_ax.h | 119 |
1 files changed, 0 insertions, 119 deletions
diff --git a/drivers/isdn/hisax/bkm_ax.h b/drivers/isdn/hisax/bkm_ax.h deleted file mode 100644 index 27ff8a88679b..000000000000 --- a/drivers/isdn/hisax/bkm_ax.h +++ /dev/null @@ -1,119 +0,0 @@ -/* $Id: bkm_ax.h,v 1.5.6.3 2001/09/23 22:24:46 kai Exp $ - * - * low level decls for T-Berkom cards A4T and Scitel Quadro (4*S0, passive) - * - * Author Roland Klabunde - * Copyright by Roland Klabunde <R.Klabunde@Berkom.de> - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef __BKM_AX_H__ -#define __BKM_AX_H__ - -/* Supported boards (subtypes) */ -#define SCT_1 1 -#define SCT_2 2 -#define SCT_3 3 -#define SCT_4 4 -#define BKM_A4T 5 - -#define PLX_ADDR_PLX 0x14 /* Addr PLX configuration */ -#define PLX_ADDR_ISAC 0x18 /* Addr ISAC */ -#define PLX_ADDR_HSCX 0x1C /* Addr HSCX */ -#define PLX_ADDR_ALE 0x20 /* Addr ALE */ -#define PLX_ADDR_ALEPLUS 0x24 /* Next Addr behind ALE */ - -#define PLX_SUBVEN 0x2C /* Offset SubVendor */ -#define PLX_SUBSYS 0x2E /* Offset SubSystem */ - - -/* Application specific registers I20 (Siemens SZB6120H) */ -typedef struct { - /* Video front end horizontal configuration register */ - volatile u_int i20VFEHorzCfg; /* Offset 00 */ - /* Video front end vertical configuration register */ - volatile u_int i20VFEVertCfg; /* Offset 04 */ - /* Video front end scaler and pixel format register */ - volatile u_int i20VFEScaler; /* Offset 08 */ - /* Video display top register */ - volatile u_int i20VDispTop; /* Offset 0C */ - /* Video display bottom register */ - volatile u_int i20VDispBottom; /* Offset 10 */ - /* Video stride, status and frame grab register */ - volatile u_int i20VidFrameGrab;/* Offset 14 */ - /* Video display configuration register */ - volatile u_int i20VDispCfg; /* Offset 18 */ - /* Video masking map top */ - volatile u_int i20VMaskTop; /* Offset 1C */ - /* Video masking map bottom */ - volatile u_int i20VMaskBottom; /* Offset 20 */ - /* Overlay control register */ - volatile u_int i20OvlyControl; /* Offset 24 */ - /* System, PCI and general purpose pins control register */ - volatile u_int i20SysControl; /* Offset 28 */ -#define sysRESET 0x01000000 /* bit 24:Softreset (Low) */ - /* GPIO 4...0: Output fixed for our cfg! */ -#define sysCFG 0x000000E0 /* GPIO 7,6,5: Input */ - /* General purpose pins and guest bus control register */ - volatile u_int i20GuestControl;/* Offset 2C */ -#define guestWAIT_CFG 0x00005555 /* 4 PCI waits for all */ -#define guestISDN_INT_E 0x01000000 /* ISDN Int en (low) */ -#define guestVID_INT_E 0x02000000 /* Video interrupt en (low) */ -#define guestADI1_INT_R 0x04000000 /* ADI #1 int req (low) */ -#define guestADI2_INT_R 0x08000000 /* ADI #2 int req (low) */ -#define guestISDN_RES 0x10000000 /* ISDN reset bit (high) */ -#define guestADI1_INT_S 0x20000000 /* ADI #1 int pending (low) */ -#define guestADI2_INT_S 0x40000000 /* ADI #2 int pending (low) */ -#define guestISDN_INT_S 0x80000000 /* ISAC int pending (low) */ - -#define g_A4T_JADE_RES 0x01000000 /* JADE Reset (High) */ -#define g_A4T_ISAR_RES 0x02000000 /* ISAR Reset (High) */ -#define g_A4T_ISAC_RES 0x04000000 /* ISAC Reset (High) */ -#define g_A4T_JADE_BOOTR 0x08000000 /* JADE enable boot SRAM (Low) NOT USED */ -#define g_A4T_ISAR_BOOTR 0x10000000 /* ISAR enable boot SRAM (Low) NOT USED */ -#define g_A4T_JADE_INT_S 0x20000000 /* JADE interrupt pnd (Low) */ -#define g_A4T_ISAR_INT_S 0x40000000 /* ISAR interrupt pnd (Low) */ -#define g_A4T_ISAC_INT_S 0x80000000 /* ISAC interrupt pnd (Low) */ - - volatile u_int i20CodeSource; /* Offset 30 */ - volatile u_int i20CodeXferCtrl;/* Offset 34 */ - volatile u_int i20CodeMemPtr; /* Offset 38 */ - - volatile u_int i20IntStatus; /* Offset 3C */ - volatile u_int i20IntCtrl; /* Offset 40 */ -#define intISDN 0x40000000 /* GIRQ1En (ISAC/ADI) (High) */ -#define intVID 0x20000000 /* GIRQ0En (VSYNC) (High) */ -#define intCOD 0x10000000 /* CodRepIrqEn (High) */ -#define intPCI 0x01000000 /* PCI IntA enable (High) */ - - volatile u_int i20I2CCtrl; /* Offset 44 */ -} I20_REGISTER_FILE, *PI20_REGISTER_FILE; - -/* - * Postoffice structure for A4T - * - */ -#define PO_OFFSET 0x00000200 /* Postoffice offset from base */ - -#define GCS_0 0x00000000 /* Guest bus chip selects */ -#define GCS_1 0x00100000 -#define GCS_2 0x00200000 -#define GCS_3 0x00300000 - -#define PO_READ 0x00000000 /* R/W from/to guest bus */ -#define PO_WRITE 0x00800000 - -#define PO_PEND 0x02000000 - -#define POSTOFFICE(postoffice) *(volatile unsigned int *)(postoffice) - -/* Wait unlimited (don't worry) */ -#define __WAITI20__(postoffice) \ - do { \ - while ((POSTOFFICE(postoffice) & PO_PEND)) ; \ - } while (0) - -#endif /* __BKM_AX_H__ */ |