diff options
Diffstat (limited to 'drivers/isdn/hisax/bkm_a8.c')
| -rw-r--r-- | drivers/isdn/hisax/bkm_a8.c | 451 |
1 files changed, 451 insertions, 0 deletions
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c new file mode 100644 index 000000000000..94bb83ce7fd8 --- /dev/null +++ b/drivers/isdn/hisax/bkm_a8.c @@ -0,0 +1,451 @@ +/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $ + * + * low level stuff for Scitel Quadro (4*S0, passive) + * + * Author Roland Klabunde + * Copyright by Roland Klabunde <R.Klabunde@Berkom.de> + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + + +#include <linux/config.h> +#include <linux/init.h> +#include "hisax.h" +#include "isac.h" +#include "ipac.h" +#include "hscx.h" +#include "isdnl1.h" +#include <linux/pci.h> +#include "bkm_ax.h" + +#ifdef CONFIG_PCI + +#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */ + +extern const char *CardType[]; + +const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $"; + +static const char *sct_quadro_subtypes[] = +{ + "", + "#1", + "#2", + "#3", + "#4" +}; + + +#define wordout(addr,val) outw(val,addr) +#define wordin(addr) inw(addr) + +static inline u_char +readreg(unsigned int ale, unsigned int adr, u_char off) +{ + register u_char ret; + wordout(ale, off); + ret = wordin(adr) & 0xFF; + return (ret); +} + +static inline void +readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) +{ + int i; + wordout(ale, off); + for (i = 0; i < size; i++) + data[i] = wordin(adr) & 0xFF; +} + + +static inline void +writereg(unsigned int ale, unsigned int adr, u_char off, u_char data) +{ + wordout(ale, off); + wordout(adr, data); +} + +static inline void +writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) +{ + int i; + wordout(ale, off); + for (i = 0; i < size; i++) + wordout(adr, data[i]); +} + +/* Interface functions */ + +static u_char +ReadISAC(struct IsdnCardState *cs, u_char offset) +{ + return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80)); +} + +static void +WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value) +{ + writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value); +} + +static void +ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size) +{ + readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size); +} + +static void +WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size) +{ + writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size); +} + + +static u_char +ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset) +{ + return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0))); +} + +static void +WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value) +{ + writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value); +} + +/* Set the specific ipac to active */ +static void +set_ipac_active(struct IsdnCardState *cs, u_int active) +{ + /* set irq mask */ + writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, + active ? 0xc0 : 0xff); +} + +/* + * fast interrupt HSCX stuff goes here + */ + +#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \ + cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0)) +#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \ + cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data) +#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \ + cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt) +#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \ + cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt) + +#include "hscx_irq.c" + +static irqreturn_t +bkm_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs) +{ + struct IsdnCardState *cs = dev_id; + u_char ista, val, icnt = 5; + u_long flags; + + spin_lock_irqsave(&cs->lock, flags); + ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA); + if (!(ista & 0x3f)) { /* not this IPAC */ + spin_unlock_irqrestore(&cs->lock, flags); + return IRQ_NONE; + } + Start_IPAC: + if (cs->debug & L1_DEB_IPAC) + debugl1(cs, "IPAC ISTA %02X", ista); + if (ista & 0x0f) { + val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40); + if (ista & 0x01) + val |= 0x01; + if (ista & 0x04) + val |= 0x02; + if (ista & 0x08) + val |= 0x04; + if (val) { + hscx_int_main(cs, val); + } + } + if (ista & 0x20) { + val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80); + if (val) { + isac_interrupt(cs, val); + } + } + if (ista & 0x10) { + val = 0x01; + isac_interrupt(cs, val); + } + ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA); + if ((ista & 0x3f) && icnt) { + icnt--; + goto Start_IPAC; + } + if (!icnt) + printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n", + CardType[cs->typ], + sct_quadro_subtypes[cs->subtyp]); + writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF); + writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0); + spin_unlock_irqrestore(&cs->lock, flags); + return IRQ_HANDLED; +} + +void +release_io_sct_quadro(struct IsdnCardState *cs) +{ + release_region(cs->hw.ax.base & 0xffffffc0, 128); + if (cs->subtyp == SCT_1) + release_region(cs->hw.ax.plx_adr, 64); +} + +static void +enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable) +{ + if (cs->typ == ISDN_CTYPE_SCT_QUADRO) { + if (bEnable) + wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41)); + else + wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41)); + } +} + +static void +reset_bkm(struct IsdnCardState *cs) +{ + if (cs->subtyp == SCT_1) { + wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4)); + mdelay(10); + /* Remove the soft reset */ + wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4)); + mdelay(10); + } +} + +static int +BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg) +{ + u_long flags; + + switch (mt) { + case CARD_RESET: + spin_lock_irqsave(&cs->lock, flags); + /* Disable ints */ + set_ipac_active(cs, 0); + enable_bkm_int(cs, 0); + reset_bkm(cs); + spin_unlock_irqrestore(&cs->lock, flags); + return (0); + case CARD_RELEASE: + /* Sanity */ + spin_lock_irqsave(&cs->lock, flags); + set_ipac_active(cs, 0); + enable_bkm_int(cs, 0); + spin_unlock_irqrestore(&cs->lock, flags); + release_io_sct_quadro(cs); + return (0); + case CARD_INIT: + spin_lock_irqsave(&cs->lock, flags); + cs->debug |= L1_DEB_IPAC; + set_ipac_active(cs, 1); + inithscxisac(cs, 3); + /* Enable ints */ + enable_bkm_int(cs, 1); + spin_unlock_irqrestore(&cs->lock, flags); + return (0); + case CARD_TEST: + return (0); + } + return (0); +} + +int __init +sct_alloc_io(u_int adr, u_int len) +{ + if (!request_region(adr, len, "scitel")) { + printk(KERN_WARNING + "HiSax: Scitel port %#x-%#x already in use\n", + adr, adr + len); + return (1); + } + return(0); +} + +static struct pci_dev *dev_a8 __initdata = NULL; +static u16 sub_vendor_id __initdata = 0; +static u16 sub_sys_id __initdata = 0; +static u_char pci_bus __initdata = 0; +static u_char pci_device_fn __initdata = 0; +static u_char pci_irq __initdata = 0; + +#endif /* CONFIG_PCI */ + +int __init +setup_sct_quadro(struct IsdnCard *card) +{ +#ifdef CONFIG_PCI + struct IsdnCardState *cs = card->cs; + char tmp[64]; + u_char pci_rev_id; + u_int found = 0; + u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5; + + strcpy(tmp, sct_quadro_revision); + printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp)); + if (cs->typ == ISDN_CTYPE_SCT_QUADRO) { + cs->subtyp = SCT_1; /* Preset */ + } else + return (0); + + /* Identify subtype by para[0] */ + if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4) + cs->subtyp = card->para[0]; + else { + printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n", + CardType[card->typ]); + return (0); + } + if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) || + (sub_vendor_id != PCI_VENDOR_ID_BERKOM))) + return (0); + if (cs->subtyp == SCT_1) { + while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX, + PCI_DEVICE_ID_PLX_9050, dev_a8))) { + + sub_vendor_id = dev_a8->subsystem_vendor; + sub_sys_id = dev_a8->subsystem_device; + if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) && + (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) { + if (pci_enable_device(dev_a8)) + return(0); + pci_ioaddr1 = pci_resource_start(dev_a8, 1); + pci_irq = dev_a8->irq; + pci_bus = dev_a8->bus->number; + pci_device_fn = dev_a8->devfn; + found = 1; + break; + } + } + if (!found) { + printk(KERN_WARNING "HiSax: %s (%s): Card not found\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp]); + return (0); + } +#ifdef ATTEMPT_PCI_REMAPPING +/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */ + pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id); + if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) { + printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp]); + /* Restart PCI negotiation */ + pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1); + /* Move up by 0x80 byte */ + pci_ioaddr1 += 0x80; + pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK; + pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1); + dev_a8->resource[ 1].start = pci_ioaddr1; + } +#endif /* End HACK */ + } + if (!pci_irq) { /* IRQ range check ?? */ + printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp]); + return (0); + } + pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1); + pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2); + pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3); + pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4); + pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5); + if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) { + printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp]); + return (0); + } + pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK; + pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK; + pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK; + pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK; + pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK; + /* Take over */ + cs->irq = pci_irq; + cs->irq_flags |= SA_SHIRQ; + /* pci_ioaddr1 is unique to all subdevices */ + /* pci_ioaddr2 is for the fourth subdevice only */ + /* pci_ioaddr3 is for the third subdevice only */ + /* pci_ioaddr4 is for the second subdevice only */ + /* pci_ioaddr5 is for the first subdevice only */ + cs->hw.ax.plx_adr = pci_ioaddr1; + /* Enter all ipac_base addresses */ + switch(cs->subtyp) { + case 1: + cs->hw.ax.base = pci_ioaddr5 + 0x00; + if (sct_alloc_io(pci_ioaddr1, 128)) + return(0); + if (sct_alloc_io(pci_ioaddr5, 64)) + return(0); + /* disable all IPAC */ + writereg(pci_ioaddr5, pci_ioaddr5 + 4, + IPAC_MASK, 0xFF); + writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c, + IPAC_MASK, 0xFF); + writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14, + IPAC_MASK, 0xFF); + writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24, + IPAC_MASK, 0xFF); + break; + case 2: + cs->hw.ax.base = pci_ioaddr4 + 0x08; + if (sct_alloc_io(pci_ioaddr4, 64)) + return(0); + break; + case 3: + cs->hw.ax.base = pci_ioaddr3 + 0x10; + if (sct_alloc_io(pci_ioaddr3, 64)) + return(0); + break; + case 4: + cs->hw.ax.base = pci_ioaddr2 + 0x20; + if (sct_alloc_io(pci_ioaddr2, 64)) + return(0); + break; + } + /* For isac and hscx data path */ + cs->hw.ax.data_adr = cs->hw.ax.base + 4; + + printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp], + cs->hw.ax.plx_adr, + cs->hw.ax.base, + cs->hw.ax.data_adr, + cs->irq); + + test_and_set_bit(HW_IPAC, &cs->HW_Flags); + + cs->readisac = &ReadISAC; + cs->writeisac = &WriteISAC; + cs->readisacfifo = &ReadISACfifo; + cs->writeisacfifo = &WriteISACfifo; + + cs->BC_Read_Reg = &ReadHSCX; + cs->BC_Write_Reg = &WriteHSCX; + cs->BC_Send_Data = &hscx_fill_fifo; + cs->cardmsg = &BKM_card_msg; + cs->irq_func = &bkm_interrupt_ipac; + + printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n", + CardType[card->typ], + sct_quadro_subtypes[cs->subtyp], + readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID)); + return (1); +#else + printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n"); +#endif /* CONFIG_PCI */ +} |